Shredder

WEIMA ZMK 50 Shredder(Range of)

Year of construction: 2011, condition: like new (used), functionality: fully functional, X-ray sorting machine. Nledpfx Aoyy A Uwjb Uog Manufacturer: TITECH TOMRA Type: X-TRACT 1200 Machine in PERFECT working condition. Complete machine overhaul performed. Source replaced: €35,000 All sensors replaced: €29,000 Belt replaced: €10,000 Application: Sorting of brominated plastics in D3E streams Sorting of metals Sorting of wood, glass, and PVC for the production of RDF (Refuse-Derived Fuel) Sorting of organic waste

Condition: used, Year of construction: 1992, functionality: fully functional, machine/vehicle number: 511001M, nominal power: 160 kW (217.54 HP), Complete and fully functional Lindemann ZB 120 x 100 - 160kW Schorch drive - Voith fluid coupling - Feed steel slat conveyor - Cyrus extraction vibrator - Axle puller - Hydraulic unit Njdpfoyizcqex Ab Ujlg - Spare grates - Hammers - Various wear parts

Year of construction: 2014, condition: repair required (used), functionality: fully functional, The machine has been idle unused for a few years now, so it needs maintenance before commissioning, which should be the responsibility of the buyer. Nljdpfotu U Ebox Ab Usg

Condition: new, - Motor power: 9 kW - Control system: PLC-based, with two-hand safety circuit - Cutting force: 35 tons - Splitting table: straight design - Cutting channel: - Max. blade length L = 2000 mm - Max. opening H = 1200 mm - Machine weight: approx. 4 tons - Color: RAL 5012 – light blue Nlsdegl Ac Sepfx Ab Uog - Hand protection guard in the area of the control panel and on the opposite side - Forklift entry shoes included (for easy transport of the machine by forklift) Made to order Price and further information upon request.

Condition: used, Year of construction: 2026, color: grey-black, empty load weight: 4 kg, fuel type: gasoline, gearing type: mechanical, TITLE: NEW OPEN-TOP HOOKLIFT CONTAINER FOR BULKY WASTE IN HARDOX WITH REAR OPENING AND TWO FOLDING DOORS, 160 MM BEAMS WITH ANGLE REINFORCEMENT AND COMPLETE WITH NEW MARCHESI CRANE AND NEW ROZZI FOUR-TINE GRAPPLE WITH ROTATOR AND JOYSTICK CONTROLS REF: 24-N-34 TYPE: Bulky waste NEW: yes LID: no OPENING: rear with two folding doors DIMENSIONS TOTAL EXTERNAL LENGTH: 4.20 m EXTERNAL BODY WIDTH: 2.30 m INTERNAL/EXTERNAL SIDE HEIGHT: 2.00 m / 2.20 m CAPACITY: 18 m³ WEIGHT: 3,500 kg BASE THICKNESS: 4 mm SIDE WALL THICKNESS: 3 mm COLOUR: grey RAL 7000 CRANE DATA BRAND: MARCHESI M4T 01.60 SERIAL NO.: 0024-23 MAX LENGTH: 6.10 m (fully extended) EXTENSIONS: 1 MAX LIFTING CAPACITY: 640 kg at maximum outreach GRAPPLE DATA BRAND: ROZZI RP120 SERIAL NO.: 59860 WEIGHT: 130 kg CAPACITY: 120 L MAX LIFTING CAPACITY: 630 kg Subject to errors and/or omissions Displayed prices do not include VAT. Please contact our sales department for an updated price list and terms. For more information: Loris: +39 348 477 3001 URL: #glispecialistidelloscarrabile SCARRABILI AURORA operates in the industrial and commercial vehicle sales and purchase sector, specializing mainly in waste management. Nlodpfxsvucpfe Ab Ujg Specialists in trucks, trailers, and hooklift equipment. With a ready-to-deliver fleet of over 50 trucks and more than 150 containers, hooklift bins with or without cranes. E.&O.E. Given the large number of listings and technical details provided, Aurora invites clients to verify the information with our sales staff.

Condition: ready for operation (used), HSM V-Press 860 baler, year 2008–2009, price: €5,800 Pressing force: 54 kN Specific pressing force: 63.46 N/cm² Drive power: 7.5 kW Cycle time: 25 s Nlodera Rbgepfx Ab Uog Loading height: 1,110 mm Feed opening width x height: 1,195 x 650 mm Bale dimensions (L x W x H): 1,200 x 780 x 1,200 mm Bale weight: 480 kg Machine dimensions (W x D x H): 1,797 x 1,247 x 2,985 mm Machine weight: 2,008 kg Binding material: wire Materials processed: foil, mixed paper, cardboard, die-cut waste, textiles, Big Bags, polystyrene HSM V-Press 860 plus, year 2013–2015, price: €8,000 HSM V-Press 860 L, year 2015, price: €9,000 HSM V-Press 860 plus, year 2019, price: €9,000 HSM V-Press 860 plus, year 2024, price: €10,000 HSM V-Press 860, new/ex-demo, year 2020, price: €13,000 4-fold bale wire tying Bale dimensions (L x W x H, mm): 1,200 x 800 x 1,000–1,200 Bale weight: approx. 500 kg Technical data (L x W x H, mm): 1,213 x 1,824 x 2,987 Feed opening (mm): 1,200 x 565 Cycle (s): 35 Pressing force (t): 54 Power supply (V): 400 (three-phase) HSM V-Press 860 plus B, year 2020, price: €14,000 Pressing force: 594 kN Voltage/Frequency: 400 V/50 Hz Drive power: 4 kW Feed opening width x height: 1,500 x 651 mm Bale dimensions (L x W x H): 1,500 x 780 x 1,200 mm Bale weight: 550 kg Feeding type: Manual Machine dimensions (W x D x H): 2,099 x 1,245 x 2,985 mm Machine weight: 2,336 kg Binding material: wire Material processed: foil, cardboard Idle cycle time: 25 s

Condition: new, Year of construction: 2024, Gold River SWZ-700 water separators Application description: The GOLD RIVER SWZ series separator has been designed for special tasks, it can cope with the most difficult materials that contain many properties that disturb the separation process in separators commonly available on the market. SWZ water separators separate heavy fractions (non-ferrous metals) from, among others, plastics in the process of recycling secondary raw materials. SWZ separator equipped with a four-section copper water system equipped with radial nozzles with variable linear geometry. The separator uses the latest divided type of separation mat. The development of a modern module for preliminary division and preparation of material guarantees the purity of recovered raw materials in a very short time (plastics, metals). Nledpoua Tbwsfx Ab Ueg Why a water system? Our device uses a system similar to that used in the gold recovery industry. We use water as a carrier and a force that affects the materials in a gentle way. In the water system, all particles with higher mass are gently washed out and separated, generating no losses during the entire separation process. The properties of water together with our proprietary solutions are unrivaled compared to, for example, air separators. SWZ type separators are used: Separation of heavy from light materials (metal granulates contaminated with plastic, foil, paper, cotton, fibers) Cleaning plastics after air separators (dry) Separation of metals in cable and non-ferrous metal recycling lines The SWZ-700 water separator, thanks to the use of the latest module, performs the separation process in a very short time, therefore it is characterized by a high hourly efficiency of separated material of approximately 1200 kg/h. Description of action: The material fed into the separator goes through the transport channel to the module for initial fraction division into its mass and humidity changes. Some of the material is separated at this stage. In the second part of the module, the humidity of the remaining batch changes. Then the material falls onto the separation table where the final fraction separation takes place. As a result of this process, we obtain valuable materials from both sides of the separator. Construction description: The massive structure and the inertial drive of the separator are made of materials appropriately selected to withstand the overloads resulting from vibrations. The supporting frame ensures excellent stiffness and failure-free operation for many years. Due to the type of vibration drive, the design does not require the installation of a soil separator. Separation table equipped with hydraulic adjustment of the angle of inclination. The separation table has a special module for initial division of fractions into their mass and preparation for final separation. The water system has several water pressure valves. The water circulation in the separator is closed. There is no need for constant access to an external water source because the device works using the water already in the tanks. Based on experience and continuous research in our laboratories. We are able to provide you with separators individually adapted to the specific nature of the material being separated. In various versions and sizes. SWZ-700 separators are manufactured to individual order.

Condition: good (used), “Rentec Dinosaurus 2600S” for Sale Manufacturer: Rentec Type: Dinosaurus 2600 S Included Hydraulic-unit and control-unit build in container. With overhauled rotors. Also outlet conveyor in stock which fits to the Rentec Dinosaurs 2600S. Nlodpovt Tptefx Ab Uog See PDF-file below for more detailed information.

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, The unit was dismantled from the production line and operated until the end. Regularly serviced, ready for operation. Nedpfx Aeya Uubob Ujlg

Condition: ready for operation (used), Drum chipper type Bruks type 1202 CS6 for production of high quality pulp chips from bulky mixed waste such as: Edgings, slabs, trim ends, plywood, veneer and joinery waste and log tops. Nodpfx Ajuhvhpsb Ujlg The chipper can produce pulp and board chips, or fuel chips. Capacity up to 50 m3 chips per hour With bigger electrical motor up to 100 m3 of chips per hour Electrical motor 75 kW