Control panel / membrane keypad WEINIG Rondamat 912

WEINIG Rondamat 912

Condition: good (used), WEINIG RONDAMAT 912 TOOL SHARPENING MACHINE FOR FULLY-AUTOMATIC SHARPENING OF STRAIGHT KNIVES. SPECIFICATIONS: MAX. WORKING WIDTH: 260 MM MIN. TOOL DIAMETER: 80 MM MAX. TOOL DIAMETER: 280 MM AUTOMATIC INDEXING: Z 1 TO Z 36 ADJUSTABLE CLEARANCE ANGLE, RADIAL: 15 – 35 DEGREES ADJUSTABLE CLEARANCE ANGLE, AXIAL: 0 - 15 DEGREES GRINDING WHEEL BORE: 20 MM Ppsdpfx Anor A A T Sotet GRINDING WHEEL DIAMETER: 125 MM/150 MM GRINDING WHEEL SPEED: 4600 RPM AUTOMATIC GRINDING WHEEL ADJUSTMENT NO. OF GRINDING CYCLES: 01-09 MAX. GRINDING SPEED, STEP-LEES ADJUSTABLE TO MAX. 530 MM/MIN TOTAL POWER: 2 KW GRINDING ARBOUR DIAMETER: 50 MM GRINDING WHEEL ADAPTOR 1 COOLANT THANK WITH PUMP

Condition: used, No. 3176 Automatic planer and moulder WEINIG Hydromat 1000 Used, year of construction 2007 6 spindles: bottom-right-left-top-top-bottom Electronic feed 6 - 60 m/min Working width 80 - 150 mm Working height 23 - 65 mm Finished slat widths 4 - 15 mm Max. Max. number of slats 16 pieces Slat lengths 400 - 4000 mm 1st spindle horizontal at the bottom Brake motor 11 kW, 6000 rpm Spindle diameter 45 mm Pedpju Agh Sjfx Antspt Tool flight circle 125 - 180 mm 2nd spindle vertical right Brake motor 7.5 kW, 6000 rpm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment travel 80 mm 3. spindle vertical left 7.5 kW, 6000 rpm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment travel 80 mm Pressure shoe in front of the spindle, swiveling away, pneumatic roller contact pressure 4. spindle horizontal top 15 kW, 6000 rpm, diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment path 45 mm Split pressure shoe in front of upper spindle, adjustable and swiveling away, pneumatic 5. horizontal top spindle as saw spindle Brake motor 37 kW, 5000 rpm Diameter 45 mm Axial adjustment travel reduced to 25 mm Tool flight circle 112 - 250 mm Max. Sawing depth 35 mm Axial adjustment path 45 mm Split pressure shoe in front of upper spindle, adjustable and swiveling away, pneumatic 6. horizontal spindle at the bottom as saw spindle Brake motor 30 kW, 5000 rpm Axial adjustment travel reduced to 25 mm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Sawing depth 35 mm Axial adjustment path 45 mm All moulder spindles with high-performance bearings Electronic feed 7.5 kW Adjustment travel of the feed rollers compared to the left-hand spindle, axial 35 mm Shorter roller distance compared to the right-hand spindles Running meter counter, electric, with 2 counters Short infeed table (1.2 m) with 2 driven rollers above the table 1 driven, toothed roller in the table, lateral pressure roller Automatic waxilite pump / lubricant pump Machine with 4-roller extension, pendulum shafts extended to 200 mm 2 driven, toothed rollers in the outfeed table 2 driven, toothed rollers in the machine table Pressure beam before and after upper spindle with mechanical digital display DigiSet (digital double display) for left and top spindles Electrical height adjustment of the upper spindles and the feed Machine already dismantled and stored Sale on behalf of customer, ex location near South Tyrol, without transportation and assembly Subject to errors in the description and price Transportation and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: used, No. 3213 Thermal treatment system / vacuum dryer WTT Used, year of construction 2017 Thermal treatment system / thermal chamber for the modification of wood The WTT thermal chamber is a system for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on the thickness and type of wood. The system has a powerful energy and heat transfer system and works with a gas or oil-fired boiler system that uses thermal oil as a heat transfer medium. Technical data: Capacity: 5950 - 9900 m³ of wood per year (for 330 working days) Usable volume: 9 m³ (with 50 mm wood thickness) Stack dimensions: 10500 x 1300 x 1100 mm LWH Minimum board thickness: 10 mm Power connection: 3 x 400 V, 50 Hz + zero + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heat output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel duplex EN 4462 Door opens hydraulically, with 1.5 kW drive Working pressure: 0.1 to 15 bar (absolute) Working temperature: 0 °C to 220 °C 200 mm glass wool insulation, clad with 1 mm galvanized sheet steel Main components: 1. autoclave, in which the heat treatment takes place 2. vacuum system that sucks the air out of the autoclave before heat is applied 3. energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. nitrogen generator 6. gas cooler system Heating and cooling system: Heat exchanger: 8 units (4 on each side) Material: Stainless steel pipes (seawater resistant) Total floor area: 165 m² Cooling water consumption: 1000 l/batch (not contaminated, only heated) Psdjv Si Szopfx Antept Control and operation: Control system: WTT ExoT (fully automatic) 22” color monitor, IBM computer, printer Sensors: 4 PT100 temperature sensors 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special equipment: Hydraulic rail bridge for convenient transportation of wooden trolleys Automatic trolley extraction with cable winch (1.5 kW) 2 MW thermal oil boiler (heating) Fuel oil tank (4000 l) with measuring system Insulated 20 foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6000 mm length) Functional description: 1. filling the autoclave with wood 2. creating a pre-vacuum 3. filling with gas 4. heating 5. modifying 6. cooling 7. pressure equalization 8. creating a post-vacuum / drying 9. pressure equalization 10. emptying Certified EC Pressure Equipment Directive (PED) 97/23/EF Construction EN 13445 Sale on behalf of customer, from location near 5020 Salzburg (Austria), without dismantling, transportation and assembly Dismantling, loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: used, machine/vehicle number: IDC000031, Chip drying barrel Length - 14 m Width - 3.6 m Drying capacity - 10t/h Pedpfx Anorl Ra Hjtept

Condition: excellent (used), WEINIG Rondamat 909, S/N 93362, Year 2001 – Ref. No. 119131 WEINIG Rondamat R 909, Machine for the automatic sharpening of straight knives in planing heads • Automatic indexing • Planer head diameter min. 85 mm to max. 225 mm • Max. tool length 330 mm (table stroke 440 mm) • Unlimited number of cutting edges Ppsdpswvql Nefx Antjt • Continuously adjustable clearance angle 15° – 35° • Grinding spindle speed n=4,000 rpm • Grinding wheel D=125 mm, bore d=20 mm • Grinding motor 1.1 kW, n=2,850 rpm • Feeding motor 0.053 kW, n=1,300 rpm • Grinding feed rate 650 mm/min • Indexing motor 0.033 kW, n=1.00 rpm • Freely selectable grinding passes per tool 1 – 5 • Coolant pump motor 0.065 kW, n=2,900 rpm • Coolant / tank capacity approx. 115 liters • Mounting arbor D=50 x 330 mm • Machine complete with accessories Machine dimensions • Width 1,150 mm • Depth 820 mm • Height 1,200 mm • Weight 450 kg Condition: 100% function tested = AS NEW condition Price: On request Payment: Prior to handover/loading Inspection: At any time by prior arrangement Subject to error and prior sale

Condition: used, The Stenner VH105 double bandsaw with two movable saw blocks that allow one of them to be placed behind the feed system to cut with one saw or to feed timber through the saw without sawing, both without removing the saw blade. - Manufacturer: Stenner, - Model: VHET105, - Saw pulley diameter: 1050 mm, - Saw blade width: 130 mm, - Feed speed: 10 – 80 m/min, - Distance between saws: 5 mm, Ppsdpstp E Uzefx Antot - Distance between saws max: mm: 400 mm.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, SARMAX APACHE 15 IMPREGNATING MACHINE WITH 8 BRUSHES. In good condition, fully functional. Height and width are motorized. Ppsdpfjw E Evzsx Antjt

Year of construction: 2022, condition: new, Distance between cassettes minimum 450 mm and at the end 300 mm. Stick length 1000-1550 mm Pedpfjm Dtiuex Antept

Condition: excellent (used), Complete board sizing line consisting of roller conveyors, destacking device, transport table, Haist saw, Weinig Hydromat 22 AL four-sided planer with tooling, and a stacker. Ppsdpfowz Id Tex Antot

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 9000x1400x1680 mm Weight 1600 kg Ppodpfov A E Ndjx Antjt Total power requirement 7,5 kw - Max process length 2.5 m (Can be customzied)- Max process width 200 mm -Min process width 30 mm- Max process thickness 1O0 mm (Can be customzied)- Saw blade 405/120/30/3 , 455/120/30/3 mm- Spindle motor 7.5 KW / 400 V- Machine size 9000 mm x 1400 mm x 1680 mm- Machine weight 1600 kg