Center Lathe
WEIPERT Voest Alpine W802

Name: WEIPERT Voest Alpine W802
Brand: WEIPERT Voest Alpine
Availability: InStock

Year of construction

1985

Condition

Used

Location

Goldenstedt Germany

Show map

Machine data

Machine type:: Center Lathe

Manufacturer:: WEIPERT Voest Alpine

Model:: W802

Year of construction:: 1985

Condition:: used

Price & Location

Location:: Goldenstedt

Call

Details about the offer

Listing ID:: A20314780

Reference number:: 2031-3965

Update:: 25.02.2026

Description

greates pass round over bed 810 mm
swing diameter over face slide 560 mm
centre distance 00 mm
bed width 480 mm
slide valve travel 400 mm
upper head travel 180 mm
turning tool - shaft cross cut 32 x 25 mm
power capacity 22 kW
max. torque on the spindle 30 Nm
spindle head Gr. 11, DIN 55027
spindle diameter in front bearing 152,4 mm
spindle bore 106 mm
turning speed range 9 - 1800 U/min
turning speeds 24
longitudinal feeds: 0,092 - mm/U
face feeds 0,046 - mm/U
metric threading 0,5-112 mm
inch threading 1/4 - 56 G/1"
thread - module mm
thread - DP 1 - 224 Pitch
tailstock quill diameter 115 mm
quill stroke 225 mm
taper of tail spindle MK 6
max. workpiece weight between centres 00 kg
Kedpfsxn Ty Rox Abcolp
max. workpiece weight -without tailstock 750 kg
3-jaw chuck Röhm, Ø
Overall size ca. 4600x1900x1600 mm
weight ca. 4300 kg
Number of feed stages and threads: 99

Accessories:
3-axis digital display
Mobile chip guard over the entire length (plexiglass)
Coolant device
Rapid traverse in Z and X axes
Multifix steel holder size C with 6 interchangeable cassettes
Bed stop with micrometer scale
Fixed steady rest - 300 mm
Taper sleeve for main spindle MK 6
Travelling center point (center point) MK 6

Bed guides in very good condition!

Seller

Registered since: 2003

121 listings online

Call

Send inquiry

Telephone & Fax

+49 4444 ... show

Fax:

These listings may also fit your interest.

Listing

Cycle-controlled lathe VDF Boehringer VDF 800 DUS

Wormerveer

7,153 km

Cycle-controlled lathe
VDF BoehringerVDF 800 DUS

Call

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 2042.6958-01, quill diameter: 160 mm, overall weight: 8,000 kg, rotational speed (min.): 6 rpm, rotational speed (max.): 1,600 rpm, distance between centers: 3,000 mm, VDF lathe type 800 DUS in very good condition. Specifications: Heidenhain Manual Plus 620 control Speed 6-1600 rpm (2 steps) Swing over bed 800 mm Spindle bore 128 mm Distance between centers 3000 mm Spindle mounting DIN 55027 No. 11 Year of manufacture 2017 Dimensions 6,320 mm (including chip conveyor + 1,200 mm) 2,930 x 2,440 mm Weight 8,000 kg Accessories: Heidenhain Manual Plus 620 control Kljdpfxjx S Nv Sj Abcep Steady rest 250-500 mm 4-jaw chuck 700 mm 4-jaw chuck 450 mm 3-jaw chuck 315 mm Parrat tool holder with 4 holders

See details

Listing

Neuenkirchen

6,832 km

CNC lathe
DMT KERNDMT CD1100

Call

Condition: like new (used), Year of construction: 2021, operating hours: 1,200 h, functionality: fully functional, turning diameter: 1,100 mm, power: 46 kW (62.54 HP), distance between centers: 2,000 mm, load hours: 1,200 h, A DMT CD1100 lathe with Heidenhain control and only 1,200 operating hours is available. The working area offers a swing diameter of approx. 1,100 mm over the bed and approx. 800 mm over the cross-slide. The tool holder is a Multifix D1. The distance between centers is 2,000 mm. The main spindle drive is a motor with 46 kW output at 60% duty cycle and two gearbox stages. Tailstock: - Quill diameter: 125 mm - Taper: 6 Morse taper Delivery: Collection by the buyer Payment: 100% via bank transfer immediately upon invoicing, prior to collection All information is non-binding. Subject to prior sale. The machine is sold without any guarantee or warranty claims and remains our property until full payment is received. Kjdpfxjxlza Hj Abcelp

See details

Listing

FLAT GRINDING MACHINE Geibel & Hotz FS 640 SC

Eisenach

6,768 km

FLAT GRINDING MACHINE
Geibel & HotzFS 640 SC

Call

Condition: used, Year of construction: 2010, functionality: fully functional, 1 pc Surface Grinding Machine FS 640 SC with Fagor control Make: Geibel & Hotz Year of manufacture: 2010 Technical Data Working Area: Grinding area - Maximum grinding area 600 x 450 mm - Standard magnetic chuck size 600 x 400 mm - Clamping area (table to spindle center) 140 - 525 mm - Standard grinding wheel 300 x 50 x 76.2 mm - Table load incl. magnet 600 kg - Grinding spindle motor power approx. 3.7 kW - Total connected load approx. 11 kW - Table speed 2 to 28 m/min - Cross/vertical feed speed 100-1000 mm/min Required space 3.95 x 3.16 x 2.47 m Machine weight approx. 2.1 t Kodpex Dgvqsfx Abcolp Equipment Machine-specific accessories, belt filter system, magnetic separator, extraction unit Magnetic chuck with adjustable holding force, automatic wheel dressing incl. compensation, Dressing diamond, balancing device, clamping device, 4 grinding wheels Technical data subject to change.

See details

Listing

Deskle

6,499 km

Sandblasting unit
TOSCATS-500

Call

Condition: good (used), Hook type shotblasting machine 250 kg TOSCA TS-250 Type: Hook type Max. diameter of workpiece: 1000 mm Max. height of workpiece: 1500 mm Max. workpiece weight: 500 kg Machine oppening width: mm Nr. Of turbines: 2 Turbine type: 360 Turbine wheel diameter: 360 mm Power of turbine: 7,5 kW Kljdpfxovpgq Ns Abcjp Max. turbine flow: 105 kg/min Type of transport rail: Y Cleaner type: airwash Foundation: no Housing protection: Mn+ rubber Req. air flow: 3.000 m3/h Max. installed power: app. 19 kW Total weight of machine: 0 kg Total width of machine: mm Total height of machine: mm Total length of machine: mm Machine is in the process of full refurbishment. All components that are damaged will be replaced with new, turbiness fully reconditioned, new color RAL 7037/2000..... Machine will be dellivered in condition comparable AS NEW. !!! AS NEW CONDITION !!!

See details

Listing

Lathe-conventional-electronic GILDEMEISTER CT 40

Korschenbroich

7,029 km

Lathe-conventional-electronic
GILDEMEISTERCT 40

€2,000

Fixed price plus VAT

Call

Listing

Lathe-conventional-electronic WEILER MATADOR VS 2

Ahaus

7,000 km

Lathe-conventional-electronic
WEILERMATADOR VS 2

Call

Condition: ready for operation (used), turning length 500 mm turning diameter over bed 297 mm turning diameter over slide rest 160 mm spindle bore 36.0 mm tool adaptor DIN 55022 Gr. 5 quill: 3 MK quill travel 90.0 mm turning speeds 30 - 3550 U/min motor speeds: 1410 / 2830 U/min total power requirement 3.3 kW voltage 380 V weight of the machine ca. 620 kg. range L-W-H 1420 x 700 x 1200 mm from a vocational school - in very good condition (!!) particularly suitable for medium-precision turned parts Kjdpjxq Hhyefx Abcjlp Features: - Robust lead/feed screw lathe - RÖHM three-jaw chuck Ø 160 mm - Foldable lathe chuck guard - Chuck key - MULTIFIX steel holder A, with 3x new inserts - Movable tailstock - Swiveling machine light - Control panel, front left - Automatic feeds for face and upper support - Machine base, with cabinet door (storage space) - Chip splash guard rear panel - 1x empty tool cabinet - Emergency stop button - Operating instructions

See details

Listing

Poland

6,946 km

HAAS VF-2
HAASVF-2

Call

Condition: ready for operation (used), Year of construction: 2008, operating hours: 5,557 h, travel distance X-axis: 706 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, controller manufacturer: HAAS, table width: 914 mm, table length: 356 mm, table load: 1,361 kg, spindle speed (max.): 8,100 rpm, number of axes: 3, This HAAS VF-2, manufactured in 2008, offers strong machining capability with 706 mm of X-axis travel, 406 mm on the Y-axis, and 508 mm on the Z-axis. Equipped with a spindle speed of 8100 rpm and a powerful 22.4 kW spindle motor, it is well suited for demanding milling applications. The visual and technical condition of the machine is very good for its age. Contact us for more information. • Table: 356 x 914 mm • Tool magazine capacity: 20 tools Additional equipment • Chip conveyor Ksdex D Hpkspfx Abcslp • Documentation / operating manual

See details

Listing

CNC turning and milling center HWACHEON HI- TECH 200B

Tipton

7,615 km

CNC turning and milling center
HWACHEONHI- TECH 200B

Call

Condition: good (used), Year of construction: 2008, HWACHEON HI- TECH 200B CNC LATHE MAKE HWACHEON, MADE IN SOUTH KOREA MODEL HI TECH 200B YEAR 2008 CONTROL FANUC O i-TB SWING OVER BED 500.0 mm SWING OVER SADDLE 390.0 mm MAX MACHINING DIA 350.0 mm MAX WORK LENGTH 400.0 mm TRAVERSES (XZ) X AXIS: 195.0 mm Z AXIS: 430.0 mm CHUCK DIA 250.0 mm MAX. SPINDLE SPEED 3,500 RPM SPINDLE NOSE A2-8 SPINDLE BAR CAPACITY 76 mm TURRET 12 STATIONS MACHINE WEIGHT 4,500 kgs PLUS RENISHAW PROBE PARTS CATCHER Kljdet Urwhopfx Abcep TAILSTOCK SWARF CONVEYOR MACHINE MANUALS MACHINE IN GOOD WORKING ORDER

See details

Listing

Baden-Baden

6,912 km

Press brake
HämmerleBM200-4100

€7,000

ONO plus VAT

Call

Condition: good (used), functionality: fully functional, Year of construction: 1995, working width: 4,100 mm, throat depth: 250 mm, overall weight: 20,000 kg, pressing force: 200 t, Hämmerle BM200-4100. The machine was dismantled at the old plant in 2023, but it was not reassembled or put into operation at the new site. Since then, the machine has been kept in storage. All accessories and documentation are included. The machine can be inspected at any time and is immediately available for loading. All data can be found in the pictures... Kledpjwa S Dnefx Abcsp No tools are included, as these were compatible with the new machine.

See details

Listing

Wiefelstede

6,930 km

Lathe 420 x 1340 mm
Weisser**PF200

€3,750

Fixed price plus VAT

Call

Condition: good (used), Year of construction: 1956, Heavy lathe, turning machine, lathe, center and feed screw lathe, center and feed screw lathe -Manufacturer: Weisser, lead screw lathe type PF200 -Turning length: 1340 mm -Turning Ø over bed: 420 mm -Turning Ø over support: 240 mm Kedstzf N Rjpfx Abcolp -Spindle bore: Ø 41 mm -Spindle speeds: 31.5 - 1400 rpm -Three-jaw chuck: Röhm Ø 250 mm -Accessories: incl., see photos -Tailstock mount: MK4 -Drive motor: 2.5/3.5 kW -Dimensions: 2670/1000/H1230 mm -Weight: 1450 kg

See details

Advertise here

Center LatheWEIPERT Voest Alpine W802

Machine data

Price & Location

Details about the offer

Description

Seller

Send inquiry

Telephone & Fax

Center Lathe
WEIPERT Voest Alpine W802