Cycle controlled lathe

Weisser Heinbronn HECKTOR CNC 295x2000

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. Hsdpfx Aehzbipea Seff - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Condition: ready for operation (used), Lathe Fabr Takisava Type TAL 510 with lathe chuck + quick-change holder + center punch Hodpfxevyuuqs Aa Soff

Condition: repair required (used), Year of construction: 2003, Kern lathe CD 402 Baij 2003 in top condition but with control system issues. Hfodpfx Aasxn Axce Sef

Year of construction: 2001, condition: used, Cazeneuve Maxica 590 With collet Control: SOMAB NUM SP + S 5 Hjdpfoh Aylvox Aa Soff

Year of construction: 1991, condition: ready for operation (used), Axes: 5, max. grinding wheel diameter: 150mm, spindle speed: 9000rpm, workpiece spindle speed: 1500rpm, clamping spindle speed: 13000rpm, travel X/Y/Z: 200mm/190mm/150mm, tool holder: HSK-50, machine dimensions X/Y/Z: approx. 1700mm/1400mm/1800mm, control: NumRoto 1060, control defective. Including coolant pump and coolant tank, grinding wheel set with 12x holders. Documentation available. On-site inspection is possible. Hfjdpfxevu Dfbj Aa Ssf

Condition: used, Thread rolling machine ORT RP30U 2-roll 30 ton Hfsdpfx Aajt H Ty Uj Ssf swiveling heads variable speed drive #1331 Under power in our warehouse in Gussago BS. Test run possible M i m u Machine Tools Italy Rolling is a mechanical process without chip removal that can be performed cold or hot, having as a purpose the improvement of the surface finish (therefore the fatigue behavior Power (Ton): 30 Number of rollers: 2

Condition: like new (used), Year of construction: 2008, operating hours: 1,120 h, Controller ARISTECH (similar as FANUC) Number of axes: 4 Table size 640 x 470 mm X Axis Travel 425 mm Y Axis Travel 300 mm Z Axis Travel 250 mm Max workpiece size 800 x 600 x 250 mm U Axis Available:standard Hfodpfsvvl Uajx Aa Sjf Weight cca 3000 kg Dimensions LxWxH = 1860 x 2050 x 2100 mm The machine consist of following units 1. EDM machine 2. Controller cabinet 3. Water tank and pump 4. Water cooler 5. Transformer 6. Transformer Nr.2 (power supply) The machine was barelly used. Still unter power. It will be due to company liquidation.

Condition: excellent (used), Tacchi HD/1450 X 4M Large Spindle Bore (515mm) Year 2002 Siemens CNC Control Swing over bed 1450mm Swing over saddle 1000mm Hollow spindle 515mm Chucks front and rear of Headstock Speed range 1.5 – 450 rpm 15,000kg weight between centres Baruffaldi 4 way Auto Toolpost 2 x 3 point steadies Hfedpfjxg Ivdsx Aa Sef

Year of construction: 2002, condition: ready for operation (used), With two machining modules, X-axis: -50 to 725mm, Y-axis: -200 to 300 / -250 to 250mm, rapid traverse X-, Y-, Z-axis: 18/12/30m/min, control: Siemens Sinumerik, temperature range: 5–40°C, power type/frequency: 3 PEN / 50Hz, rated voltage: AC 400V, control voltage: DC 24V, auxiliary voltage: AC 230V, connected load: 102kVA, rated current: 148A, rated current (fast): 148A, fuse (slow): 160A, length: 8000mm, width: 3000mm, height: 4000mm, weight: approx. 17t, operating hours: approx. 80,000h. The machine is fully functional, the ball screw drive (recirculating spindle) of the Z-axis was renewed in 2024 and it has been regularly maintained. Comes with documentation, control cabinet, hydraulic unit, filter elements, and chip conveyor. An on-site inspection is possible. Hodpfxowbuyzs Aa Seff

Condition: used, Year of construction: 2013, turning diameter . mm turning length 2000 mm control Siemens 840 D sl mainspindle: turning speed max. 3800 1/min mainspindle: torque max. 1200 Nm diameter of quill 140 mm center point MK6 quill power 5 - 30 kN feed rate Z-axis mm/min rapid traverse Z-axis 40 m/min feed rate X-axis - mm/min rapid traverse X-axis 25 m/min total power requirement 125 kW Hfjdpfx Aaovu E R Sj Ssf weight of the machine ca. 20 t The machine can still be inspected under power at the production plant. The condition of the machine is good, the accuracy during turning operation is very good. The milling drive is not functional. A quotation from Niles for the repair of the milling drive is available on request. Including hydraulic steady rest.