CNC Lathe

WIRTHS NEU / NEW

Condition: new, Year of construction: 2024, faceplate diameter 1200- 2000 mm swing diameter 1400- 2500 mm turning height 1000- 2000 mm Control Siemens/Fanuc We offer brand new CNC vertical lathes, with and without live tooling. Swing diameter could be between 1,4 to 2,5 m. Please send your enquiry if you are Ppodpfx Aeix A Avekfsr interested.

Year of construction: 2002, condition: ready for operation (used), With two machining modules, X-axis: -50 to 725mm, Y-axis: -200 to 300 / -250 to 250mm, rapid traverse X-, Y-, Z-axis: 18/12/30m/min, control: Siemens Sinumerik, temperature range: 5–40°C, power type/frequency: 3 PEN / 50Hz, rated voltage: AC 400V, control voltage: DC 24V, auxiliary voltage: AC 230V, connected load: 102kVA, rated current: 148A, rated current (fast): 148A, fuse (slow): 160A, length: 8000mm, width: 3000mm, height: 4000mm, weight: approx. 17t, operating hours: approx. 80,000h. The machine is fully functional, the ball screw drive (recirculating spindle) of the Z-axis was renewed in 2024 and it has been regularly maintained. Comes with documentation, control cabinet, hydraulic unit, filter elements, and chip conveyor. An on-site inspection is possible. Ppsdpfx Akswbuyzefsr

Condition: new, Year of construction: 2024, faceplate diameter 2000- 12000 mm swing diameter 2500- 15000 mm turning height 1600- 7000 mm Control Siemens/Fanuc Ppedpfxoix A Ayo Akfsr We offer brand new CNC vertical lathes, with and without live tooling. Swing diameter could be between 2,5 to 15 m. Please send your enquiry if you are interested.

Condition: used, Year of construction: 1999, x-travel 12000 mm y-travel 3600 mm z-travel 1500 mm spindle turning speed range 3000 U/min Control: Heidenhain iTNC430 Milling head 2 axes, indexed 2.5° Vertical (Y-axis): 3600 mm Transverse (Z-axis): 1500 mm Longitudinal (X-axis): 12,000 mm Guide rail length: 14,700 mm Guide rail width: 1400 mm Lowest milling position of the spindle nose measured from the floor (head horizontal): 855 mm Podpfxoxwdygj Akfjpr Low column design 870 x 900 x 2,625 mm: 3,000 kg High stand design 870x900x3,025 mm: 3,500 kg Motor power: 37 kW Mounting: ISO 50/ DIN 69871-A Speeds: 11.7:231:3000 rpm Feed range: 2:2500 mm/min Rapid traverse X-axis: 12000 mm/min Z-Y axis: 15000 mm/min Feed motor power X-axis: 55 Nm Z-axis: 37 Nm Y-axis: 37 Nm Accuracy Positioning accuracy: 0.025 mm Repeatability: 0.015 mm Weight: approx. 42,000 kg Air supply to the machine: 300 L/min at 4.5 bar NOTE: The clamping plates and chip conveyors are not included in the scope of delivery. However, we can offer you both used and new clamping plates and chip conveyors on request.

Condition: good (used), Year of construction: 2017, operating hours: 8,800 h, functionality: fully functional, machine/vehicle number: NL2561708843, number of spindles: 2, CNC Control: Mitsubishi M730UM (CELOS - ERGOline Touch) Capabilities: Travel X-axis (mm): 260 Psdpfsyzxcgox Akfspr Travel Y-axis (mm): ±50 Travel Z-axis (mm): 795 Turning length max. (mm): 705 Turning diameter max. (mm): ø 366 Swing over bed (mm): ø 920 Swing over cross slide (mm): ø 740 Bar working capacity (mm): 80 Tool Magazine: Tool stations: 20 Tool holder: BMT40 Max. speed driven tools (rpm): 10,000 Driven tool power (kW): 5.5 / 4.9 / 4.2 (3 min / 5 min / continuous) Rapid traverse (m/min): 30 Main Spindle: Max. spindle speed (rpm): 4,000 Spindle drive power (kW): 18.5 / 18.5 / 15 (25% duty cycle / 50% duty cycle / continuous) Max. torque (Nm): 49 Sub-Spindle: Max. spindle speed (rpm): 5,000 Spindle drive power (kW): 11 / 7.5 (25% duty cycle / continuous) Max. torque (Nm): 22 Sub-spindle travel (mm): 734 Cooling System: Tank capacity (liters): 366 Equipment: Chip conveyor Signal tower Machine operating hours: Power on hours: 19,393 Cutting time: 8,800 Rated power requirement (kVA): 48 Basic machine: Dimensions / Weight Length (mm): 5,330 Width (mm): 4,100 Height (mm): 2,395 Weight (kg): 8,360 The depicted tools, driven tools, and both chucks are not included in the scope of delivery.

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, CNC Turning and Milling Center - DMG GILDEMEISTER - CTX gamma 1250 TC YOM: 2009, until 2011 showroom machine, from 2012 operating The machine can be inspected by appointment in the factory under power. Condition: Good (high accuracy), ready for immediate use. Spindle hours (August 1st, 2025): 9.580 h The heart of the machine is the integrated traveling column with turning milling spindle and interpolating B-axis. Machine basic data: * Part hollow clamping device (hydraulic) * C-axis * Cross slide above with turning/milling spindle as motor spindle, with hydraulic clamping in turning, tool holder: Capto C6 * Y-axis: +/- 200 mm * B-axis: +/- 120° * Disc-type tool magazine * Absolute, direct measuring systems in X-, Y-, Z1-axis * USB-interface, Ethernet interface TECHNICAL SPECIFICATIONS: * Control: Heidenhain CNC Pilot 4290, 3-D path control TURN PLUS Working area: * Swing diameter over bed: 630 mm * Turning diameter: 630 mm Ppedpfx Aew Hg Nlskfsr * Spindle distance: 1.510 mm * Bar diameter max.: 65 mm Main drive I: * Drive power (100% / 40% ED): 24 / 34 kW * Speed range from - up to: - 5.000 rpm * Speed of the C-axis: - 5.000 rpm Turning/milling spindle: * Tool holder: Capto C6 * Spindle speed: - 12.000 rpm * Drive power (100% / 40% ED): 13.2 / 22 kW * Torque (100% / 40% ED): 60 / 100 Nm Tool magazine: * Number of tools: 36 * Dimensions of the machine approx. (Width/Depth/Height): 6.860 x 4.220 x 2.530 mm * Total weight of the machine approx.: 18,5 tons EQUIPMENT: * Well equipped … * No steady rest available * Documentation complete available. Detailed technical data sheet and information on equipment available on request. There is no guarantee for correctness and completeness of the technical details and and accessories.

Condition: good (used), Year of construction: 2003, X 1740mm, Y 766mm, Z 660mm Podpfx Aswyblzokfjpr 10000 rpm Parts shown by hand not come.

Condition: used, Technical details: spindle diameter: 130 mm drill depth: 1380 mm x-travel: 2500 mm y-travel: 1600 mm z-travel: 380 mm w-axis: 900 Bohrspindelvorschub mm U-axis: 320 Planschiebervorschub mm control: auf Wunsch tool taper: ISO SK50 revolution per minute: Planschieber:4,5-180 U/min rpm - drive spindle: 4,5-900 U/min feed:: x/y: 5-2000 total power requirement: ca. 40 kW weight of the machine ca.: ca.< 35 + AZusatzeinrichtungen t The machine can be offered in 4 different sales options. Please choose! 1. the machine is in mint mechanical condition. As is/is. Ppsdpovr S Uljfx Akfjr 2. the machine as is/is incl. plate field 4000x2000x300mm = stock no. 1101081 3. the machine is newly wired, with new electrical cabinet, digital display, with 4-axis, AC drives from Siemens, axis motors from Siemens (50A/31Nm) with 12 months warranty on all new parts. 4. further additional equipment can be offered as an option. Such as coolant system, chip conveyor, enclosure etc. We should discuss this on the table with your technical staff. i.D. *

Condition: new, Year of construction: 2024, functionality: fully functional, Universal CNC cylindrical grinding machine for high-precision internal & external cylindrical grinding MBF 453U from the MaiBase platform The machine is a completely new development with strong dimensions in a small space! Technical data: Center width: 430 mm Standard center height: 200 mm Grinding length: 400 mm Grinding wheel diameter: 500 mm Z-axis adjustment path: 550 mm X-axis travel: 385 mm Dimensions and weight: 2200 x 2500 x 2400 mm // 6500 kg Equipment of the machine: - FANUC Oi-F Plus control system - Grinding headstock (swiveling) with 15kW motor spindle - Workpiece headstock MK5 - Tailstock MK3 with 20 mm stroke (optional 60 mm / 120 mm) - Handwheel for manual axis movement - Z-axis - X-axis - C-axis - B-axis - Glass scales for X- and Z-axis - Internal grinding spindle FISCHER UJ80 Ppodpstrf Smefx Akfor - Internal grinding spindle (GMN motor spindle) optional - Dressing spindle attached to the workpiece headstock for rotary dressing - Automatic door drive

Condition: new, Welding rotary tables increase work flexibility, productivity and quality. Rotary tables also support the welder at work and thus guarantee a safe working environment and better working ergonomics. The main advantage of PEMA rotary tables is that the workpieces can always be set in the best possible welding position. This can increase welding productivity by up to 70 %. 50 years of productive and high quality welding - for half a century we have been designing and manufacturing welding rotary tables for demanding and heavy workpieces. Pemamek welding rotary tables are a combination of modern design and reliable, efficient technology and can be easily integrated with any other PEMA solution. Pedeg Urz Hspfx Akfjpr Each of our welding rotary tables is designed in-house and manufactured with high quality components. We have the PEMA representation for Southern Germany. We still have some old generation APS rotary tables in stock. The new generation APSI are already in stock.