TP-Plus-2:90

Wittmann

Condition: used, Year of construction: 2017, Serial no. 141342-100, control system type Unilog B8, clamping force 1,800 kN, clear tie bar spacing 570 x 520 mm, mould installation height 225 - 550 mm, opening stroke 480 mm, maximum daylight 1,030 mm, ejector stroke hydraulic/electric 180/160 mm, ejector force 40 kN, dry cycle time 1.7 s per 364 mm, maximum mould weight 1,800 kg, minimum mould dimensions 346 x 346 mm, injection unit type 750, screw diameter 45 mm, screw stroke 200 - 225 mm, screw L/D ratio 22, 1 hydraulic core pull, calculated shot volume 193 - 442 cm³, specific injection pressure 1,714 - 3,000 bar, max. screw speed 325 rpm, screw torque 900 Nm, nozzle stroke/nozzle force 350 mm/40 kN, injection unit/dosing unit by Wittmann, type Feedmax S3-NET, year 2021, sprue picker/robot by Wittmann, type WP80, year 2020, travel X/Y/Z 100 x 550 mm x 90°, compressed air hose reel by Metabo, type SA250, length 25 m, machine weight 7,200 kg, operating hours 15,564 This item is part of an online auction. Sale is subject to approval by the client. Pgsdpfxeyc Syme Aa Dsg

Condition: good (used), Year of construction: 1988, voltage 380 V connected load 7,5 kVA dimensions 2725 x 1930 x 1773 mm weight of the machine ca. 2500 kg --> Technical data Main data: --> Table surface: 605 x 300 mm --> Table longitudinal movement max. (manual): 750 mm --> Table transverse movement: 340 mm --> Grinding height between table/new grinding wheel min/max: 22.5 / 322.5 mm Pgodpfx Aow Dvkaea Deg --> Standard size of magnetic clamping plate: 600 x 300 mm --> Workpiece weight incl. magnet: 420 kg --> X-axis / longitudinal movement: --> T-slots (number x width): 3 x 17 mm --> Table feed, hydraulic: 0.3 - 25 m/min --> Travel per handwheel revolution: 47 mm --> Y-axis / height movement: --> Automatic vertical feed - coarse in 12 steps: 0.001 - 0.03 mm --> Automatic vertical feed - fine in 8 steps: 0.001 - 0.01 mm --> Distance per handwheel revolution (x1/x10): 0.1 / 1.0 mm --> Graduation on handwheel (x1/x10): 0.001 / 0.1 mm --> Trigger strokes: 0 - 5 --> Rapid traverse: 400 mm/min --> Z-axis / transverse movement: --> Automatic transverse feed intermittent: 0.5 - 20 mm --> Automatic transverse feed / rapid traverse continuous: 0.1 - 1.0 m/min --> Distance per handwheel revolution: 5.0 mm --> Scale mark on handwheel: 0.02 mm --> Standard grinding wheel: --> Ø x width: Ø 355x38 (50) mm --> Bore: Ø 127 mm --> Speed: 1500 rpm --> Accessories Various grinding wheels --> Documentation

Condition: used, Year of construction: 2017, Ser.-No. 140228-100, Control system type Unilog B8, clamping force 1,800 kN, tie bar clearance 570 x 520 mm, mould installation height 225 - 550 mm, opening stroke 480 mm, platen gap max. 1,030 mm, ejector stroke hydraulic/electric 180/160 mm, ejector force 40 kN, dry cycle time 1.7 s per 364 mm, max. mould weight 1,800 kg, min. mould dimensions 346 x 346 mm, injection unit type 750, screw diameter 45 mm, screw stroke 200 - 225 mm, L/D ratio 22, 2 hydraulic core pulls, calculated shot volume 193 - 442 cm³, specific injection pressure 1,714 - 3,000 bar, max. screw speed 325 rpm, screw torque 900 Nm, nozzle stroke/nozzle force 350 mm/40 kN, injection/dosing unit by Wittmann, type Feedmax S3-NET, year 2017, sprue picker/robot by Wittmann, type WP80, year 2021, travel X/Y/Z 100 x 550 mm x 90°, compressed air hose reel by Metabo, type SA250, length 25 m, machine weight 7,200 kg, operating hours 17,844 This item is part of an online auction. The sale is subject to the approval of the seller. Psdoyc Staspfx Aa Dsgg

Condition: used, Year of construction: 2017, Ser.-No. 138524-100, Control unit: Type Unilog B8, Clamping force: 1,100 kN, Tie bar clearance: 470 x 420 mm, Mould installation height: 200 - 450 mm, Opening stroke: 380 mm, Maximum platen distance: 830 mm, Ejector stroke (hydraulic/electric): 140/125 mm, Ejector force: 25 kN, Dry cycle time: 1.5 s per 294 mm, Maximum mould weight: 1,000 kg, Minimum mould dimension: 296 x 296 mm. Injection unit: Type 350, Screw diameter: 25 mm, Screw stroke: 175 mm, Screw L/D ratio: 22, 1 hydraulic core pull, Calculated shot volume: 85.9 - 220 cm³, Specific injection pressure: 1,595 - 3,000 bar, Maximum screw speed: 350 rpm, Screw torque: 340 - 500 Nm, Nozzle stroke/nozzle force: 250 mm/40 kN. Dosing unit: Manufacturer Movacolor. Injection/dosing unit: Manufacturer Wittmann, Type Feedmax S3-NET, Year 2017. Sprue picker/robot: Manufacturer Wittmann, Type WP80, Year 2018, Travel axes X/Y/Z: 100 x 550 mm x 90°, Compressed air hose reel: Manufacturer Metabo, Type SA250, L 25 m. Machine weight: 4,800 kg, Operating hours: 42,853. This item is part of an online auction Sale is subject to the approval of the client. Psdpfx Aoyc Sqxoa Dogg

Year of construction: 1998, condition: like new (used), VAN DAM 568 COM III 8 COLOUR CUP PRINTER 560 COM III 8 COLOUR CUP PRINTER, the machine is in good condition. The specifications are listed down below. Machine Type: Cup printing machine Brand: Van Dam Model: 560 COM III Year: 1998 Colours: 8 colours Minimum cup diameter: 63 mm Maximum cup diameter: 203 mm Condition: In good condition If you have any questions about the machine or it's specifications you can always contact us. Pgjdpfoh Ha I Eex Aa Deg

Condition: used, Year of construction: 2017, Serial no. 138522-100, control system type Unilog B8, clamping force 1,100 kN, tie bar clearance 470 x 420 mm, mould installation height 200 - 450 mm, opening stroke 380 mm, max. platen distance 830 mm, ejector stroke hydraulic/electric 140/125 mm, ejector force 25 kN, dry cycle time 1.5 s per 294 mm, max. mould weight 1,000 kg, minimum mould size 296 x 296 mm, injection unit type 750, screw diameter 35 mm, screw stroke 200 - 225 mm, L/D ratio 22, 1 hydraulic core pull, theoretical shot volume 193 - 442 cm³, specific injection pressure 1,714 - 3,000 bar, max. screw speed 325 rpm, screw torque 900 Nm, nozzle stroke/force 350 mm/40 kN, dosing unit by Movacolor, injection/dosing unit by Wittmann, type Feedmax S3-NET, year 2021, sprue picker/robot by Wittmann, type WP80, year 2021, travel paths X/Y/Z 100 x 550 mm x 90°, compressed air hose reel by Metabo, type SA250, length 25 m, machine weight 5,200 kg, operating hours 36,180. Psdpfx Aajyc Snke Djgg This item is part of an online auction. Final acceptance subject to the approval of the seller.

Condition: used, Year of construction: 2017, Serial No. 138264-100, control system type Unilog B8, clamping force 1,800 kN, clear tie bar spacing 570 x 520 mm, mould installation height 225 - 550 mm, opening stroke 480 mm, maximum platen distance 1,030 mm, ejector stroke hydraulic/electric 180/160 mm, ejector force 40 kN, dry cycle time 1.7 s per 364 mm, maximum mould weight 1,800 kg, minimum mould dimensions 346 x 346 mm, injection unit type 750, screw diameter 45 mm, screw stroke 200 - 225 mm, L/D ratio 22, 1 hydraulic core pull, theoretical shot volume 193 - 442 cm³, specific injection pressure 1,714 - 3,000 bar, maximum screw speed 325 rpm, screw torque 900 Nm, nozzle stroke/force 350 mm/40 kN, dosing unit by Movacolor, injection/dosing unit by Wittmann, type Feedmax S3-NET, year 2021, sprue picker/robot by Wittmann, type WP80, year 2021, travel X/Y/Z 100 x 550 mm x 90°, compressed air hose reel by Metabo, type SA250, length 25 m, machine weight 7,200 kg, operating hours 46,038. Pedpfx Aaoyc Sh De Degg This item is part of an online auction. The sale is subject to the approval of the seller.

Condition: used, machine/vehicle number: 11666, Rotor diameter: 280 mm Rotor width: 300 mm 3 blade rotors 2 rows of stator blades Inlet cross-section approx. 300 x 280 mm Pgjdpfsghgq Njx Aa Deg Drive motor 11 kW With noise protection box, noise protection hopper, and exhaust fan

Condition: excellent (used), Manufacturer: WITTMANN Model: W818-8339 Year of manufacture: 2016 Pedex Eiufjpfx Aa Dsgg Type of equipment: Removal system / manipulator Movement range (X / Y / Z): X: 420 mm Y: 1,200 mm Z: 1,500 mm Equipment: Safety devices

Condition: excellent (used), Year of construction: 2017, Wittmann Battenfeld EcoPower 110/350 with the Wittmann W818 robot / Electric machine / Operating hours: approx. 16,000 in automatic mode Year of manufacture: 2017 Injection unit: Screw diameter: 35 mm Injection weight: 153.8 g Injection pressure: 2083 bar Dosing volume: 169 cc Clamping unit: Clamping force: 110 t Bar spacing: 470x420 mm Size of the clamping plates: 680x660 mm Ejector: electric Clamping unit: toggle lever Control: UNILOG B8 - touchscreen Additional equipment: Perfect technical condition Electric machine: high-speed, energy-saving and very quiet Operating hours: approx. 16,000 in automatic mode Euromap 67 Robot interface Control with Air valve Hydraulic core pull x 1 Control with hot runners Injection unit is wear-resistant and resistant to corrosion Central lubrication Automatic tool height adjustment Parallel movements The machine was serviced in Germany Robot Wittmann W818 Year of manufacture: 2015 4-axis robot: 3 axes are driven by servo motors (electric); axis C - pneumatic Travel paths in axes: X-420, Y-1200, Z-2000 Pgjdpfxjyctdye Aa Djg Touch control panel The safety package for robots Robot with adapter, conveyor belt and protective housing Purchase of the robot and the conveyor belt for an additional charge Dimensions: Weight: 4800 kg Length/width/height: 4.91x1.42x2.10 m All machines offered are started by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to take part in live technical tests in our company in Łódź. Price: On request

Condition: new, machine/vehicle number: Baureihe GSL 300 / Neumaschine, The cutting mills in the GSL series 300/400 to 300/800 are primarily intended for the shredding of production-related scrap material in the injection molding and blow molding sectors. Pgsdpfxjghgbho Aa Deg In addition to the key advantages of the GSL series, the slow-running cutting mills GSL 300/400, GSL 300/600 and GSL 300/800 are particularly suitable for large-area parts, such as car door panels, bumpers or hollow bodies. The "V-arrangement" of the rotor blades keeps the pre-shredded material in the center of the rotor. This significantly reduces wear on the grinding chamber walls when grinding glass fiber reinforced plastics. Material sticking to the side walls is avoided. The staggered arrangement of the rotor disks means that only individual blades are used at any one time, so a higher cutting force is available in each case.

Year of construction: 2019, operating hours: 21,800 h, condition: ready for operation (used), controller manufacturer: BATTENFELD, controller model: UNILOG B8, screw diameter: 35 mm, This WITTMANN Battenfeld EcoPower 110/350 was manufactured in 2019. A robust electrical injection moulding machine featuring a screw diameter of Ø35 mm and an injection volume of 168 cm³. With tie bar spacing of 470 x 420 mm, it's currently producing with polystyrene. Total working hours are approximately 21800, maintaining a very good technical condition. Contact us for more information about this machine. • Injection volume: 168 cm³ • Tie bar spacing: 470 x 420 mm • Number of cores: 1 core • GK: x4 • Total working hours: approx. 21,800 h • Machine currently in production: Yes Pjdpfoyca Skex Aa Djgg • Material: Polystyrene (PS) • Technical condition: Very good

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, conveyor belt length: 3,100 mm, conveyor belt width: 400 mm, total length: 3,100 mm, total width: 550 mm, total height: 900 mm, overall weight: 80 kg, power: 0.18 kW (0.24 HP), input voltage: 380 V, input frequency: 50 Hz, input current: 3 A, Equipment: type plate available, Aluminum frame conveyor belt 310x40cm 8m/min speed sorting belt conveyor mobile aluminum frame horizontal conveyor belt for sale in excellent condition length: 3100mm belt width: 400mm full width: 480mm Pgsdoydp Tgopfx Aa Dsg speed: 8meters/min drive: geared motor 0.18kw 50Hz belt material rubber fabric green color. frame material aluminum profile. height: 820mm adjustable/tilting legs braked wheels.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61037337, clamping force: 800 kN, screw diameter: 30 mm, displacement volume: 113 cm³, injection pressure: 2,500 bar, injection weight: 103 g, mold height (min.): 400 mm, ejector force: 22,600 N, ejector stroke: 150 mm, opening stroke: 900 mm, total length: 3,960 mm, total width: 1,480 mm, total height: 2,020 mm, overall weight: 3,550 kg, heating capacity: 10.9 kW (14.82 HP), drive type: Hadraulisch, clear span: 470 mm, tool weight: 10,00,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The fully hydraulic CX series offers a particularly compact, efficient and flexible two-platen machine. The very compact two-platen concept with cantilevered clamp offers generous space for peripheral equipment and excellent accessibility. Efficient and intelligent energy management with BluePower servo drive continues to provide a powerful basis for the highest demands and the right solution for every application. TECHNICAL DATA: KM 80 / 380 CX G06 (order 38655610) CONTROL  MC 6 with 21.5" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 55  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 670 x 670  Tool installation height min. - max. mm 400 (increased by 150 mm)  Opening width mm 900 (increased by 150 mm)  Mold opening stroke max. mm 500  Hydraulic ejector drive  Ejector stroke mm 150  Ejector force forwards/backwards kN 22.6 / 9.8  Ejector speed forwards/backwards mm/s 760 / 800  Max. Mold weight kg 1000 SPRING UNIT  Screw diameter / type mm 30 / standard (customization possible)  Effective Ls/D ratio 26.7  Injection pressure bar 2500  Stroke volume cm³ 113  Shot weight at max. stroke for PS g 103  Injection speed mm/s 100 Pgjdpeud N Hdjfx Aa Dsg  Injection flow rate cm³/s 71  Screw drive/speed 1/min 295  Plasticizing flow (standard) g/s 12.3  Nozzle contact force kN 50 ELECTRICAL PARAMETERS Connected load kW 15.0  Installed heating capacity kW 10.9  Power supply V / Hz 380 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 3.55  Length x width x height m 3.96 x 1.48 x 2.02 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  1 additional temperature control point for nozzle heating  Air valve 1 - compartment (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Hydraulic core pull 1 - compartment (BWAP)  Euromap interface handling E18, E63  Euromap interface (central computer) E67, E77  Adaptive Process Control (APC)  Injection stamping circuit  Graphic analysis package The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: excellent (used), Year of construction: 2010, Wittmann W853 Linear Z=4000mm , payload: 41,5 kg Number of axis: 3 Pgodjwnfmfspfx Aa Dsg X: 1500 mm Y: 2600 mm Z: 4000 mm \+ C axis pneumatic Reach: 4000 mm Payload: 41 kg Robot has NEW CPU + batteries , fully tested by Wittmann technician in our showroom.