Keyseating Machine

WOLFF LW

Condition: reconditioned (used), machine/vehicle number: 550-235-ELD, GENERAL CHARACTERISTICS workpiece Ø max. 41 mm Range Module máx/min. 1,5 / 0.39 Crjdpfjd Nw Ttjx Abxof Rack face width 92 mm Manufacturing No. 550-235-ELD Máx/min. pitch form 20/40-32/64 Maximum stroke of tools trolley 760 mm Rack length máx. 610 mm ELECTRICAL CHARACTERISTICS Main motor power 15 Cv

Condition: good (used), Flat-jaw thread rolling machine, thread rolling machine, segment thread rolling machine, cold forming machine, knurling machine, thread rolling machine Cedpfji Eg Nkox Abxsrf -Manufacturer: EWM, flat jaw thread rolling machine knurling machine -Type: unfortunately without type designation -Drive: 4.6/5.8 kW 1435/2890 rpm -Belt drive: 3-way adjustable -Knurling plate: RAA 1.0 -Central lubrication: -Dimensions: 1680/920/H1440 mm -Weight: 1308 kg

Condition: ready for operation (used), Year of construction: 1998, pressure 85.0 t chamfer lenght 2050 mm distance between columns 1750 mm column arm 410 mm stroke 365 mm dayligth 535 mm ajustment speed 200 mm/sec working feed 1.0 - 10.0 mm/sec return speed 135 mm/sec back stop - adjustable max. 600 mm table width 120 mm work height max. 1050 mm Number of working hours 28.500 h oil volume 200 l operating pressure 340 bar total power requirement 14.0 kVA weight of the machine ca. 9050 kg range L-W-H 2680 x 2100 x 2885 mm with increased installation height / piston stroke very well maintained condition (!!) with only approx. 28.500 operating hours - in checked condition - machine video - ?v=ZuwyPKJSYLw Equipment: - CNC electro-hydraulic press brake Csdpfxexaa Uro Abxerf - including DELEM CNC control * swiveling control panel at the front left - CNC controlled axes: Y1 - Y2 - X - R - Z1 - Z2 - I + CNC crowning - CNC electro-motorized back stop (X axis) - CNC electro-motorized height adjustment of the back stop (R axis) - CNC electro-motorized adjustment of the stop fingers (Z axes) - CNC pneumatic die displacement (I axis) - CNC motorized table crowning - WILA electro-hydraulic upper tool clamping - WILA electro-hydraulic Lower tool clamp - 1x freely movable 2-hand / foot control - 2x front, stable support arms including "sliding system" - side protective device (swinging doors) - rear protective device (swinging doors) - bending tool storage cabinet (right front, side) - original operating instructions + circuit diagram etc. further technical data: - feed speed X axis .. 500 mm/sec. - feed speed R axis .. 300 mm/sec. - feed speed Z axis .. 1000 mm/sec. - travel range X axis .. max. 600 mm - travel range R axis .. max. 250 mm

Year of construction: 2011, condition: excellent (used), Cloos welding robot Qirox QRC 320 incl. control system V 6, stand base for vertical arrangement, Cloos welding machine Quinto II 603 (600 A), wire feeder, welding torch, torch hose package, mechanical cleaning, pressure amplifier 1 tilting and rotating table WPK 5000, load capacity 500 kg, 1 start pre-selection, 1 control unit for customer-supplied sliding door Gas nozzle sensor, arc seam tracking, point editor System will be completely overhauled and serviced before delivery. Codpfx Aboizwv Noxorf A second station with another identical tilting and rotating table is possible.

Condition: excellent (used), Year of construction: 2007, operating hours: 5,217 h, turning length: 285 mm, spindle bore: 91 mm, travel distance X-axis: 1,000 mm, travel distance Z-axis: 285 mm, spindle motor power: 26,000 W, total height: 2,200 mm, total length: 3,200 mm, total width: 2,300 mm, overall weight: 6,600 kg, CNC Lathe Credpfeyyxlfsx Abxsf MAZAK - QTN 300-II MACH-ID 9480 Make: MAZAK Type: QTN 300-II Control: Mazatrol Matrix Nexus Year: 2007 No Tailstock Automatic doors Tool eye Chip conveyor Max. turning Ø:830mm X-Axis: 1000mm Z-Axis: 285mm Spindle bore: 91mm Speedrange: 5000Rpm Spindle power: 26kW Hours: 5217H Length: 3200mm Width: 2300mm Height: 2200mm Weight: 6600kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1996, operating hours: 7,827 h, functionality: fully functional, machine/vehicle number: 119713, turning diameter over cross slide: 160 mm, turning length: 244 mm, turning diameter: 160 mm, spindle bore: 45 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 1 rpm, travel distance X-axis: 155 mm, travel distance Z-axis: 290 mm, spindle motor power: 10,000 W, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (max.): 6,000 rpm, total height: 1,780 mm, total length: 2,000 mm, total width: 1,330 mm, quill travel distance: 150 mm, quill diameter: 55 mm, quill stroke: 150 mm, workpiece weight (max.): 25 kg, overall weight: 2,700 kg, bar passage: 40 mm, chuck outer diameter: 154 mm, bar diameter (max.): 45 mm, spindle diameter: 50 mm, Equipment: documentation/manual, rotational speed infinitely variable, The Mazak Quick Turn 10 is a compact CNC lathe manufactured by the Japanese company Mazak. It has been specifically developed for the precise machining of small and medium-sized turned parts and is widely used in mechanical engineering, toolmaking, as well as in series production. The machine features a robust slant-bed design, a tool turret, and the dialog-based Mazatrol control system, which enables fast programming directly at the machine. This makes it suitable both for single parts and small series production. Codpfeyt E Nvsx Abxorf Control: Mazatrol T-Plus Standard chuck: Kitagawa N-06A0515 The quoted price does not include dismantling, packaging, or shipping. Sale ex location, subject to prior sale. The machines are sold in used condition; any warranty and guarantee are excluded.

Condition: excellent (used), Year of construction: 1997, Indexing table 400 mm hand Set tooling included Table bore 10 - 130 mm Key width from 2 - 32 mm Feed rate 0,5 - 5 M/Min; Table Ø: 690 x 460mm Table load: 2000 Ram adjustment:0 - 425mm Length: 1300mm Width: 1100mm Credpfxexclfzs Abxef Height: 1400mm Weight: 1800kg

Condition: good (used), 3 machine vices Goody. Csdpfx Aerai Akobxjrf

Year of construction: 1962, condition: good (used), machine/vehicle number: 1083, Broaching Machine - Vertical Manufacturer: Rausch Type: RS10/915 Machine number: 1083 Crodpefc T Eujfx Abxsf Year of manufacturing: 1962 Force: 10 Tons Stroke: 915 mm System DIN 1415 With pedestal for upper-floor positioning

Year of construction: 1995, condition: used, machine/vehicle number: 18891, Force: 10 to. Stroke: 1000mm 3 Broaching-stations With chip-conveyor + platform and safety door Codpfxjbrcmko Abxorf