Linear feeder

Wolfgang Hörmle KF 0,7-1

Condition: used, Regoplas RT50 Thermo oil temperature control unit Thermo oil up to 300'C Nlsdpsdmn E Hofx Ahnof

Condition: new, pressure 40 t throat 225 mm stroke 8-84 mm Table dimensions 580 x 450 mm ram adjustment 55 mm no. of strokes 130 Hub/min ram surface 185 x 180 mm ram hole 40 H7 mm Nedpfxsb U Hwtj Ahnslf hole in the table 210 x 170 mm T-slots 22 clamping plate 570 x 450 x 65 mm total power requirement 3,5 kW weight of the machine ca. 2,7 t dimensions of the machine ca. 1,4 x 1,1 x 2,1 m

Condition: new, Technical specifications: Drill diameter: 13 - 32 mm Point angle: 90° - 140° Speed: 4800 rpm Connection: 230 V Motor power: 0.25 kW Weight, approx.: 28 kg Dimensions, approx.: 490 x 250 x 260 mm Features: - Ideal for grinding HSS/carbide spiral drills - Safe operation due to a guided grinding process - Point angle adjustable from 90° to 140° - Compact design, with collet storage in the machine and a handle for quick stowing - Includes a pointing device to reduce the feed force - Device for back-grinding the drill cutting edges to reduce friction between the drill and the workpiece - Rotor with precision ball bearings Scope of delivery: Nledpfsd R A Dkex Ahnjf - CBN grinding wheel - 20 ER 40 collets, 13 - 32 mm - ER 40 collet holder

Condition: new, Year of construction: 2016, Technical data: Model SA-1300 Point angle can be continuously adjusted for Ø 2-6 mm from: 118° to 135° Nodpfxsrfb Ss Ahnelf Point angle can be continuously adjusted for Ø 6-13 mm from: 90° to 144° Collet set for drill diameters: 3 to 13 mm Collet type: ER 20 CBN grinding wheel (for HSS drills): Ø 78 mm Optional diamond grinding wheel (for carbide): Ø 78 mm Motor: 120 watts Spindle speed: 5300 rpm Electrical connection: 220 volts / 50 Hz Weight: 10 kg Documentation: Detailed operating manual and machine documentation in German Remarks: The SA-1300 drill sharpening machine is designed for sharpening and pointing 2-flute drills made of HSS or carbide*, in the diameter range of 3 mm to 13 mm. *Carbide drills can only be sharpened with the optional diamond grinding wheel. Spare parts and replacement grinding wheels are available from stock.

Condition: new, Year of construction: 2025, General: -Temperature range max. 150°C for oil (heat transfer fluid) -Robust steel sheet housing -Unit on rollers Hydraulics: -Sealless submersible pump -Qmax. 60 l/min. - Pmax. 3.8 bar -Tank and heating element made of stainless steel -Heating power 9 kW Nlodpfeddv Itex Ahnof -Tank capacity ~20 liters -Fittings made of brass/stainless steel -Manual oil filling -Mechanical level indicator -Indirect cooling system (tube bundle heat exchanger) -Cooling capacity ~40,000 kcal/h -Manometer -Bypass -Solenoid valves for cooling Electrical and Control: -Electronic PCB control -Solid State Relay -Safety thermostat -Sensor break monitoring -Connection cable with plug Available in approximately 4 weeks!

Condition: not inspected (used), Number of sanding units 4 St sanding width 190 mm Sanding height max. 4-180 mm weight 4200 kg Hess Expert 4-belt single wood sanding machine machine will be checked by our technicians ----- Ø Grinding at the bottom/top Ø With 2 offset grinding units each (bottom and top) Ø Grinding units (bottom and top) connected in series according to the Dressing principle Ø Pre-sanding with coarse grit (calibrate) Ø Regrinding with fine grit (finish) Ø Central motorized height adjustment of the lower grinding units Ø Central motorized and synchronous height adjustment of the entire upper Grinding and brushing units including the upper transport units Ø Oscillating sanding belt utilization (during the sanding process) Ø Absolute power connection thanks to 5.5 KW motors and large dimensions drive drums Ø Oxide ceramic grinding shoe for - exact surface geometry - no adjustment work - permanent dimensional accuracy - completely maintenance and wear-free Basic structure: Stable, heavy welded construction made of strong-walled rectangular profiles additional, statically calculated reinforcements for optimal Vibration dampening. Staggered grinding units with large dimensions Belt drive drums for slip-free belt running. Two-point suction for direct and flying dust with sealing brushes and integrated sanding belt blow-off Device to increase the service life of the sanding belts. Grinding units in heavy steel plate construction as the basis for vibration-damped, quiet tape running. Absolutely backlash-free guides as ball linear sets hardened and ground shafts. Height adjustment of the grinding units via hardened and ground special linear guides as well as pre-tensioned ones Guide carriage. Permanent precision thanks to dust and dirt protection Ball linear sets and guide carriages. Large-sized pre-grinding rollers as contact rollers. Contact rollers and Sanding shoes in a balanced ratio to the sanding belt grain load. The large drive drums guarantee full transmission the 5.5 kW drive power of the grinding motors on the sanding belt. Therefore Slip-free, stable running and optimal heat dissipation. This makes it the strongest Chip removal possible. Automatic machine stop activation in the event of a belt break. Visual display on the control panel and via flashing lights on the machine. Sanding shoes for finish completely maintenance-free and wear-free made of oxide ceramic with optimal heat dissipation. Grinding belt tension via appropriately sized compression springs. Sanding belt relaxation for belt changing using a pneumatic device sensitive, distortion-free placement of new tapes. Upper grinding unit and brush device centrally motorized Height adjustable with digital display in the control panel for the motorized Grinding thickness adjustment. Brushing and finishing device, for better surface finish, integrated into Njdet Tqy Eopfx Ahnslf the basic machine. Two special brush rollers 150 mm Æ arranged one above the other in synchronous function for advance thrust. Separate height adjustment of the brush rollers on precise Carriage guides for post-correction of wear. Additional transport roller for Removal or further transport of the workpiece from the automatic grinding machine with the conveyor belt. Wooden guide in the inlet area for hard guide and bearings mounted on both sides pressure rollers. Safe transport of profiled workpieces on ca...

Condition: used, Year of construction: 2018, Vibratory conveyor from Wolfgang Hörmle Nedst Ect Iepfx Ahnslf For sale in different versions and in good condition. SRC-N 200 left SRC-N 200 right SRC-N 250 left SRC-N 250 right HFS 168 control unit

Year of construction: 1999, condition: good (used), gravimetric dosing unit with 2 hopper stations Njdpfxsd D Nmxj Ahnslf and total 4 components with origin control cabinet, touch panel and docu

Condition: good (used), Year of construction: 1983, travel distance X-axis: 410 mm, travel distance Y-axis: 310 mm, travel distance Z-axis: 400 mm, Control: Positioning and travel control including display HEIDENHAIN TNC 135, 3-axis manual control TECHNICAL DATA Working area X-axis (longitudinal), manual/automatic: 410/390 mm Y-axis (transverse), manual/automatic: 310/290 mm Z-axis (vertical), manual/automatic: 400/380 mm Arbor stroke, vertical: 63 mm Tilting table clamping surface: 700 x 285 mm Drive power (at 1500 rpm): 2.2 kW Speed range: 45 – 2000 rpm Number of speeds: 12 Step ratio (geometrically stepped): 1.4 Tool holder (DIN 2079): ISO 40 EQUIPMENT/ACCESSORIES Nsdpfx Aoht Hbujhnolf  Manual operation and CNC program control  Vertical and horizontal machining  Tilting vertical milling head  Angle-adjustable vertical milling head  Vertical quill feed, manual  Tilting table  Coolant system  Coolant and chip tray  Chip guard in the working area  Mounting elements  Documentation

Condition: excellent (used), Year of construction: 2002, Arburg 221K-350-100 Closing 35 tons Year of manufacture 2002 Scrow 25mm Injection soaked 49 cm3 Nedpfx Ahjwgc Drjnolf