CNC lathe

XYZ SLX 555 X 3000MM CNC Lathe

Condition: used, Year of construction: 2021, operating hours: 5,300 h, functionality: fully functional, overall weight: 35,000 kg, rotor diameter: 800 mm, rotor length: 3,200 mm, power: 310 kW (421.48 HP), rotational speed (max.): 100 rpm, rotational speed (min.): 20 rpm, If you are interested, just ask! Ijdpfxevt Suhj Ac Aeik

Condition: used, Year of construction: 2010, turning length: 6,500 mm, turning diameter: 880 mm, spindle bore: 165 mm, controller manufacturer: Siemens, controller model: 840 D, _____ In General: Year of manufacture:2010 Control system:Siemens 840 D Rotation diameter:900 mm Turning diam.: 880 (750) mm Turning length:approx. 6,500 mm Spindle bore: 165 mm Tool holder:Capto C 8 Spindle: Speed:1,600 rpm Power: 60 kW Torque:4,472 Nm C-axis: 0,001° Spindle boar:165 mm 3-Jaw Chuck: SMW Autoblock KNCS-N-630-165 Tool carrier (X/Y/Z): Technology:Swivel head with milling spindle Speed:6,000 rpm Power:30 kW Tool holder:Capto C 8 Torque:315 Nm X-axis:920 mm Y-axis:500 mm (-200/+300 mm) Z-axis:6,870 mm B-Axis: 200° (-110° / +90°) Tailsstock + Steady rest: Quill diameter:180 mm Quill stroke:200 mm Steady rest slides: 2 pieces, 400 mm wide Iiedpox Axylsfx Ac Ajk Steady rest I: SMW Autoblock SLU (45-310 mm) Steady rest II: SMW Autoblock SLU (125-460 mm) Tool magazin I: Technology: Wheel magazine (double) Number of stations: 72 Tool changer: Double gripper on shuttle Tool diameter max.: 110 mm (250 mm) Tool length max.: 800 mm Tool weight max.: 25 kg Tool magazin II: Technology: Pick-up magazine Max. usable length: 1,550 mm Max. usable weight: 150 kg Equipment: Tool magazine:72 stations Chip disposal:Chip conveyor Coolant supply:Internal coolant system Coolant temperature control:Immersion recooler Workpiece measurement: Touch probe Steady rest:2x SMW Autoblock Lynette 3-Jaw chuck: SMW Autoblock KNCS-N-630-165 Tool holder: Various Capto C8

Condition: good (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 5005 + 5006, turning length: 6,500 mm, turning diameter: 500 mm, spindle motor power: 7,500 W, spindle speed (min.): 5 rpm, spindle speed (max.): 500 rpm, travel distance X-axis: 700 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 6,500 mm, rapid traverse X-axis: 6 m/min, rapid traverse Z-axis: 6 m/min, type of input current: three-phase, torque: 12,500 Nm, workpiece weight (max.): 10,000 kg, total height: 3,800 mm, total length: 16,000 mm, total width: 6,000 mm, quill diameter: 200 mm, quill travel distance: 300 mm, swing diameter over bed slide: 950 mm, center height over cross slide: 900 mm, Equipment: documentation/manual, rotational speed infinitely variable, NC turning and milling center, manufacturer Berthiez Iiodpfxswa In Ns Ac Ask Two machines available Serial numbers: 5005 and 5006 Unit price: €20,000 Three-jaw chuck 50-position tool changer for milling tools Tool changer for turning tools Chip conveyor Tool holder SK50 2 steadies Tailstock Control unit: Siemens Sprint 8ME Included in the offer: milling angle head, drilling angle head, grinding attachment EB22 Dismantling and transport are the responsibility of the purchaser.

Condition: used, Year of construction: 1996, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Geminis Lathe Type: CNC5/PLUS/1000/4000 CNC control: Fagor Year: 1996 With 2 steadies + Tooling With 2 chucks Iiodpfx Asxvr E Ioc Ajk Can be inspected under power Video available

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Technical details swing over bed 730 mm centre distance 3000 mm control Heidenhain MANUALplus4110 Additional information Very well-maintained cycle lathe with only 15652 operating hours. Working area: Center distance 3000 mm Swing diameter over bed 730 mm Swing diameter over cross slide 450 mm Bed width 480 mm Main spindle: Spindle mount according to DIN 55027 size 11 Spindle bore 130 mm Spindle diameter at front bearing 170 mm Spindle taper 1:20 Tap in center sleeve MT 6 Main drive: AC drive with 2-stage ZF gearbox (automatic shifting gearbox) Drive power (100/60% duty cycle) 22/28 kW Total speed range 1 - 2200 rpm Maximum spindle torque: approx. 2200 Nm X-axis (cross slide) performance data: Maximum travel: 400 mm Feed force: 14 kN Speed: 4 m/min Z-axis (bed slide) performance data: Feed force: 18 kN Speed: 7 m/min Max. workpiece weight: Between centers without steady rest: 2000 kg With one steady rest: 2200 kg With two steady rests: 2500 kg In the chuck: 750 kg Tailstock: Quad diameter: 115 mm Quad stroke: 225 mm Quad taper: MK 6 Equipment and accessories: Heidenhain MANUALplus 4110 CNC control SCHUNK ROTASplus 400-102 3-jaw manual chuck 2 steady rests PARAT tool holder Chip conveyor Iiedpfxjx D U Eae Ac Ajk Coolant system Work area enclosure with two sliding doors.

Condition: used, Year of construction: 1998, turning length 4.500 mm greates pass round over bed 810 - 760 mm swing diameter over slide rest 740 mm control SIEMENS - 840 C max. turning diameter 800 mm turning diameter over slide 740 mm travel -x2 axis 875 mm travel -z2 axis 5.200 mm CNC Turning- and Milling Center | NILES-SIMMONS - N40 MCT 4500 equipped with a turret for driven tools as well as NC steady rest and tailstock. Iiodpfxox Emvie Ac Aok Additional equipment: - Centering points, - Jaw sets, - Clamping jaws, The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: N-40 | N 40 | N40MCT4500 | N40MCT

Condition: used, Year of construction: 1996, functionality: fully functional, overall weight: 24,000 kg, rotor diameter: 620 mm, number of blades: 30, total length: 6,300 mm, total height: 2,430 mm, total width: 4,700 mm, rotor width: 2,491 mm, power: 200 kW (271.92 HP), type of input current: three-phase, rotational speed (min.): 150 rpm, filling opening width: 2,495 mm, filling opening length: 3,190 mm, input voltage: 380 V, Vecoplan VAZ 300/250 UNF Iiodpfx Acexlm Trj Aek This machine is still in operation and will be available on October 20th. For more information, please contact us.

Condition: used, Craven 2000mm x 8000mm Heavy Duty Lathe 2000mm swing over bed 1500mm swing over saddle 8,000mm between centres Iodpex Hp Iwjfx Ac Ajik Main drive 60kW, 40 ton load capacity Spindle speeds 2 – 152 rpm Steadies 2000mm Bed extension

Year of construction: 2020, operating hours: 2 h, condition: ready for operation (used), Control Unit Brand FANUC Model Series Oi-TF General Data Machine weight 20000 kg Main Drive Spindle speed range 1800 rpm Spindle motor power 30 / 37 kW Spindle bore 132 mm Tool taper MT5 (built-in) Number of axis 2 Movement X-Axis Movement 350 mm X-Axis Rapid Traverse 20 m/min Z-Axis Movement 3130 mm Z-Axis Rapid Traverse 10 m/min Isdpfjx D Ic Sex Ac Aoik Workpiece Workpiece drm over bed 775 mm Workpiece drm over support 630 mm Turret Number of turrets 1 Tail Stock Pinol diameter 160 mm Tools Number of station 1 Additional Equipment Electric Power Supply Required: 59 / 220 kVA This SMEC SL 4500 L was manufactured in 2020. It features an 18" chuck, a maximum turning diameter of 690 mm, and a machining length of 3,055 mm. The spindle supports speeds up to 1,800 rpm with a motor power of 30/37 kW. It includes a 12 station turret and a tailstock with a MT5 taper. Consider the opportunity to buy this SMEC SL 4500 L horizontal turning machine. Contact us for more information about this machine. Application Types Turning

Year of construction: 1999, condition: ready for operation (used), General Data Measurements width 2385 mm Measurements depth 6800 mm Measurements height 1765 mm Machine weight 5700 kg Main Drive Spindle speed range 1600 Spindle bore 92 mm Movement X-Axis Rapid Traverse 8000 mm/min Z-Axis Rapid Traverse 8000 mm/min Iisdpfx Acex D Sc As Ask Workpiece Workpiece drm over bed 720 mm Workpiece drm over support 470 mm Turret Number of tool slots 18 Rotating tools Yes Tool taper Duplomatic VDI 40 Tail Stock Pinol diameter 100 mm Pinol way 200 mm Pinol tool taper Morse 6 Media Chip conveyor Yes Additional Equipment Chuck Protection: Included Fix SteadyRest 20/200: Included Complete Rear Protection: Included 2 Handwheels in Carriage: Included Longitudinal Chip Conveyor: Included This Geminis GHT-4 720 x 3000 was manufactured in 1999. It features a maximum swing over bed of 720 mm and a distance between centres of 3000 mm. The main spindle supports a speed up to 1600 rpm with a power of 17/20.5 kW. It includes a Duplomatic turret with 8 tool positions and a longitudinal chip conveyor. Consider the opportunity to buy this Geminis GHT-4 720 x 3000 horizontal turning machine. Contact us for further details regarding this machine. Application Types Turning