Pallet Stackers

Yale MS12

Condition: new, functionality: fully functional, machine/vehicle number: HR34668, Year of construction: 2022, load capacity: 1,200 kg, lifting height: 4,620 mm, free lift: 1,518 mm, fuel type: electric, mast type: triplex, construction height: 2,050 mm, fork length: 1,150 mm, empty load weight: 1,300 kg, total length: 2,028 mm, drive type: Elektro, construction width: 790 mm, High-lift stacker Chassis number: HR34668 Load centre: 600 Fork width: 570 mm Fork thickness: 55 mm Mast type: Triplex Condition: New machine Technical condition: New Front tyre condition: New Rear tyre condition: New Description: Machine fully workshop-tested, cleaned, with new UVV safety check and inspection Full free lift, CE certificate, Nwjdpfx Asylq H Deb Uol

Condition: like new (used), Frozen block cutter Manufacturer: Magurit Stainless steel Cutting dimensions: maximum cutting size 750 x 480 x 240 mm Motor: 4 kW hydraulic Power: 400 V / 50 Hz Dimensions: 1700 x 1100 x 1850 mm 3 knives Nwodpfx Ajxrvwasb Uol

Condition: used, functionality: fully functional, machine/vehicle number: HR32056, Year of construction: 2012, operating hours: 1,071 h, load capacity: 1,200 kg, lifting height: 1,500 mm, free lift: 100 mm, fuel type: electric, mast type: duplex, construction height: 1,820 mm, fork length: 1,160 mm, empty load weight: 1,500 kg, drive type: Elektro, High-lift order picker Chassis number: HR32056 Mast type: Duplex Condition: Ready for use and fully functional Nwedpfxeu Arz Rj Ab Ujl Technical condition: normal

Year of construction: 2026, condition: new, Oscillating screen ASM series S&F oscillating screens and horizontal screens are used in many areas of the wood processing industry (sawmills, pelleting plants). Screening machines of the "ASM" series screen wood chips, wood pellets, sawdust and sawdust, waste wood, biomass and many other sawmill by-products in dry and wet applications. The material-protecting, horizontal-circular screening movement of the inclined screen box ensures a high separation efficiency of the vibrating screen. One advantage of the screening machine is that long and fibrous particles glide diagonally to tangentially over the screening surface. This means that - in contrast to throw screens - no jamming or plugging grain occurs. Further advantages are the robust design, the high screening capacity and the long, low-maintenance running time of the screening machine. In addition to standard dimensions, the company also supplies the "ASM" series as a "customising solution" in a split design for existing plants. This makes it possible to use new screening machines in cramped and difficult-to-access spaces in existing plants or sawmills. Screening machines of the "ASM" series offer screen sizes from 0.5 to 15 m² (per screen deck) and are characterised by a high screening capacity (up to 350 m³/h - depending on the material). At a glance: - Ideal for: Wood chips, pellets, sawdust, biomass, bark, waste wood, substitute fuel. - Areas of application: Wood industry, recycling and waste disposal, animal feed - Screening area: 0.5 - 15 m² (30 m² as double deck) - Screening capacity (depending on material): up to 350 m³/h - Separation size: 0.1 - 150 mm (depending on size) - Drive power: 0.55 - 15.0 kW (depending on size) Advantages: - High screening capacity - High separation efficiency - No jamming and plugging - Low noise and low maintenance - Flexible use - Individual production Do you need further information? Please contact us! We will be happy to advise you. Nwjdpoin Ey Ssfx Ab Uel

Condition: used, Year of construction: 2022, Maximum parent roll width: 1420 mm Minimum parent roll width: 600 mm Maximum parent roll diameter: 1500 mm Maximum parent roll weight: 2500 kg Maximum unwinding tension (Ø1500 mm): 600 N Minimum unwinding tension (Ø1000 mm): 40 N Minimum standard slitting width: 100 mm Maximum rewinding width: 1400 mm Maximum rewinding diameter: 1050 mm Maximum rewinding weight: • Ø76 mm shaft: 600 kg • Ø152 mm shaft: 1000 kg Maximum rewinding tension: 600 N Maximum production speed: 600 m/min Power supply: 3 x 400V 50Hz Installed power: 30 kW Compressed air: 6 bar, dry Materials to be slit: • Paper-based / liner-based packaging laminates. • Board from 80 to 300 g/m². Unwind section: A separate between-centers unwinder, type T9, 1500 mm diameter, including: • Hydraulic cylinder control for lifting parent rolls from the floor. • Two motors driving the unwinding roll, controlled by an ultrasonic diameter sensor and a tension-control dancer roller. • Two pneumatic expanding adapters, SVECOM, for 70/76 mm (3”) cores. • Two pneumatic expanding adapters, SVECOM, for 150/152 mm (6”) cores (mounted on the pneumatic end adapters). • Floating edge-correction roller. • Automatic web guiding system, FIFE DP20, with SE26A photoelectric sensor, ±100 mm correction via electric actuator — for controlling sheet edge or continuous printed line. • Connecting walkway allowing web threading at floor level while keeping full access to the slitting station. • All web path rollers are anodized. • Safety guarding for operator protection. Slitting section: A slitting station with individual pneumatic knives and circular counter-knives: • Shear cut performed against the counter-knives. • Counter-knife shaft driven by an independent motor; counter-knife shaft is pneumatic. • Pneumatic knife holders mounted on a beam with a dovetail guide (TIDLAND) and an air supply manifold for individual activation. • 10 slitting sets, each including: Individual TIDLAND pneumatic knife holder (25 mm width) and double-bevel circular knife Ø 90/60 mm. • Set of multi-groove counter-knife rings, 5 mm pitch, 50 mm length. Web separation section: • A separator roller driven by the slitting motor; angle and curvature fully adjustable. Lay-on roller: • Lay-on roller made of anodized ground aluminum or polyurethane (depending on materials). • Pressure is adjustable and synchronized with winding diameter. • Roller is removable. Automatic splicing / transverse cutting system: • Hydraulically operated pivoting arm including a transverse knife with linear motion and a backing plate for securing the web onto new cores. Trim extraction system: • Trim suction unit with two width-adjustable nozzles. • Turbine enclosed in a sound-insulated cabinet, conveying trim to a centralized system or container (not included). Rewinding section: Nwsdpfx Abjyx Uy Aj Usl • Motorized turret (two-position) supporting two rewinding shafts. • Rewinding shaft drive by an oversized asynchronous motor. • Hydraulic centering point for the active rewinding roll. • Two pneumatic expanding shafts Ø76 mm (3”), max load 600 kg each, equipped with full-width rubber strips with individual bladders. • Two pneumatic expanding shafts Ø152 mm (6”), max load 1000 kg each, also equipped with full-width rubber strips with individual bladders.

Condition: excellent (used), Year of construction: 2018, Marel Treif Puma 700 E/EB (HS) slicer chop cutter. In superb, near new condition. Bought by a large supermarket owned factory but has been in storage for many years. I am not sure if it has ever been used. Nwsdpsx Dcpgjfx Ab Ujl

Year of construction: 2021, condition: excellent (used), functionality: fully functional, Multivac P700 Double chamber vacuummachine The MULTIVAC P 700 double chamber machine - high output even at the largest product size. Exceptionally modular, robust, and user-friendly. Manufacturer: Multivac Model: P700 Year: 2021 Vacuum pump: Busch 300m3/h Seal bar length: 1.100 mm (x4) Chamber dimensions LxWxH: 1.100x700x250 mm Nwjdpfxjzp E Ats Ab Uol Power: 400V / 50Hz / 6kW Machine dimensions LxWxH: 2.600x1.000x1.145 mm Machine weight: 850 kg.

Year of construction: 2018, condition: like new (used), functionality: fully functional, MACCHI COEXTRUSION LINE FOR 7-LAYER EVOH BLOWN FILM Complete line for the production of 7-layer EVOH blown film 4 Macchi extruders with 65 mm screw diameter 3 Macchi extruders with 55 mm screw diameter Innoplast gravimetric dosing units 7-layer die head, 450 mm diameter with IBC, 2.4 mm GAP K-Design cooling ring Double thickness control IR+XRay Maximum width 2400 mm Calibration basket Rotating haul-off Nodpfjy Nk Haox Ab Uewl Cason corona treater Macchi BO-Plus double back-to-back automatic winder Web guide Year 2018

Condition: repair required (used), Year of construction: 1991, functionality: limited functionality, Single-color flexographic printer for tissue paper. Year: 1991 Nedpfey Iddvjx Ab Uswl Model: Fabio Perini 8930 Printing width: 2800 mm This printing unit must be integrated into your converting line.

Condition: ready for operation (used), Year of construction: 1985, max web width 1900 mm Nwodpfx Ajw Nvkieb Ujl