bending length: 2050bending angle (max.): 135stroke: 160weight approx.: 3500messurements (LxWxH): 3250/2500/2100Aluminium: 4Steel: 3Stainlesssteel: 2motor power: 3/1,5/0,4STANDARD ACCESSORIES
AC motorized drive of folding and clamping (Y,Z axis)
Servo motorized drive of back gauge (X axis)
Ballscrew spindle system with dual motor drives on clamping and folding
15.6’’ touchscreen controller on swivel arm with ERFOLD BASIC cnc line by line software
Clamping beam opening height 1...
Bending length 3100 mm
bending capacity 3,5 mm
Delivery time prompt, subject to prior sale
bending length: 3.100 mm
max. sheet thickness steel (420 N/mm²): 3,5 mm
max. sheet thickness stainless steel: 2,5 mm
bending angle: 0 - 135
back gauge: 800 mm
motor power: 3,7 kW
length: 4.100 mm
width: 1.950 mm
height: 1.920 mm
Weight: approx. 4800 kg
2 axes CNC control Schneider 7" touch screenSplit tool (6x150, 10x125, 5x100, 6x75mm split) Motorized back gauge 800 mm Operating instructions in GERMAN and...
.
Technical data :
.
working length 2020 mm
Bvqau9gfgz
max. sheet thickness at 400N/mm² 2,0 mm
Stroke upper beam 120 mm
.
Dimensions , W x D approx. 2,9 x 0,7 m (measured without width stop)
.
Motors : bending / lifting upper beam 0,55 / 0,75 kw
Weight approx. 1,6 to
.
Width stop, manually adjustable 750 mm
.
.
Hydraulic swivel bending machine make RAS type 71.2
Machine. # 119/4, year of construction 1962
technical data:
working width 2540 mm
max. sheet thickness 4,5 mm
opening width of the upper beam 200 mm
adjustability of the lower beam 90 mm
Adjustability of the bending beam 90 mm
angle degree adjustment 0 - 180
drive power 3 kW
dimensions approx. 3850 x 1820 x 2060 mm
Bvlts0eero
weight approx. 4200 kg
used, despite the year of construction in good condition
Max. Bending length: 2040 mm
Max. Sheet thickness: 4 mm steel
Max. Upper beam stroke: 350 mm
mass: 4000 kg
X32krpxn
Manual and automatic bending process possible Bending angle adjustable via potentiometer Lifting height of the upper beam and material thickness can be pre-selected using a dip switch Bending rail ground operation manual Further bending rails and backgauge on request
sheet width 2020 mm
plate thickness 1,5 mm
distance between columns -- mm
bending angle max. +/- 135 °
hollow max. 100 mm
total power requirement 0,55 / 1,0 kW
weight of the machine ca. 1,0 t
dimensions of the machine ca. 2,68 x 0,64 x 1,1 m
Heavy version with motorized drive for the upper and bending beam and
segmented upper beam.
- Foot control enables the sheet metal to be positioned with both hands
Bdh3ssqy
- The workpiece is clamped and bent using a motorized chain drive
- Setting the b...
bending length: 2050bending angle (max.): 135stroke: 160weight approx.: 3500messurements (LxWxH): 3250/2500/2100Aluminium: 4Steel: 3Stainlesssteel: 2motor power: 3/1,5/0,4STANDARD ACCESSORIES
AC motorized drive of folding and clamping (Y,Z axis)
Servo motorized drive of back gauge (X axis)
Ballscrew spindle system with dual motor drives on clamping and folding
15.6’’ touchscreen controller on swivel arm with ERFOLD BASIC cnc line by line software
Clamping beam opening height 1...
Bending length 3100 mm
bending capacity 2,5 mm
Delivery time approx. 4-6 months from order placement
bending length: 3.100 mm
max. sheet thickness steel (420 N/mm²): 2,5 mm
Btrlihe87z
max. sheet thickness stainless steel: 1,2 mm
bending angle: 0 - 135
min. counterbend: 15 mm
motor power: 2,2 kW
length: 4.300 mm
width: 1.770 mm
height: 1.890 mm
weight: 3.700 kg
hydraulic drive NC control for bending angle preselectionmanual backgauge 600 mmthrough-going pointing rail 45°angle of front 75 mmmechan...
sheet width 2040 mm
plate thickness 3 mm
daylight upper clamping 350 mm
bending angle max. 0-135 °
adjustment of lower and bend clamping 80 mm
control Fastimatic M200
power requirement 2,2/1,5 kW
weight of the machine ca. 2460 kg
dimensions of the machine ca. 3,2 x 2,8 x 2,1 m
Condition: ready for operation
Condition: very good
CE signed
Electric 400 Volt
CNC-control with screen
Mot. back gauge 1000 mm
Foot switch
Motorized machine with motorized bending beam adjustment for setti...
sheet width:2040 mm
plate thickness:1,2 mm
Y7k3nu8ny
total power requirement:2,5 kW
weight of the machine ca.:2,0 t
dimensions of the machine ca.:3,0 x 1,6 x 1,7 m
Max. Length of cut: 2500 mm
Max. Sheet thickness: 3 mm steel
mass: about 2800 kg
Manually adjustable backgauge up to 1000 mm Manual and automatic bending process possible Number of degrees adjustable via potentiometer Adjustable lifting height
C7otoer
Semi-automatic press brake ZGH 2140/3.0mm
→ Semi-automatic bending angle, is set on the encoder and potentiometer.
-ᐳ The machine works like a semi-automatic machine. After bending, the beam returns to the home position and the pressure beam returns to the set height. It is set to 10 mm.
→ -ᐳ This machine is suitable for series production
The maximum working length: 2140 mm.
bending capacity: 3.0 mm (steel)
bending beam thickness: 30 mm
Jtxrwy
bending angle: max. 145 degrees
upper beam opening:...
bending length: 2050bending angle (max.): 135stroke: 350weight approx.: 5950messurements (LxWxH): 3750/2300/2100Aluminium: 7Steel: 5Stainlesssteel: 3,5motor power: 2x3/2x3/0,75
STANDART ACCESSORIES
Servo drive of clamping and back gauge ( Z and X axis)
AC high torque motorized drive of folding and beam rotation ( Y and C axis)
Ballscrew spindle system with dual motor drives on clamping and folding
15.6’’ touchscreen controller on swivel arm with ERFOLD BASIC CNC Line by Line sof...
Bending length 3,100 mm
bending capacity 3,5 mm
Delivery time approx. 4-6 months from order placement
bending length: 3.100 mm
max. sheet thickness steel (420 N/mm²): 3,5 mm
max. sheet thickness stainless steel: 2,5 mm
bending angle: 0 - 135
motor power: 3,7 kW
length: 4.300 mm
width: 1.770 mm
height: 1.890 mm
weight: 4.220 kg
hydraulic drive NC control for bending angle preselectionmanual backgauge 600 mmthrough-going pointed rail 45°advance angle 75 mmmechanical end position adjustment of the ...
pan folder
Schechtl type MA 200/1
with electronic angle quick setting
year of construction 1987
working width 2040mm
bending capacity steel up to 2mm
a new top tool from Schechtl is ordered and will be delivered with the machine
bending capacity aluminium up to 2,75mm
with mechanical back gauge up to 500mm
upper beam was welded years ago by the previous owner.
Weight approx. 1480kg
Clsle7n
The offer is exclusively directed to tradesmen in the sense of § 14 BGB (German Civil Code).
No ...
max. working width: 2040 mm
for metal sheets up to: 4,5 mm
opening width top clamping bar: 320 mm
Bjr9dflpeu
adjustment bending cheek: 120 mm
clamping bar drive: 2,2 kW
below cheek drive: 2,2 kW
electrical connection: 5 kW
weight: 3700 kg
space needed: 3250 x 1000 x 1900 mm
Schechtl swivel bending machine Mabo 250
Working width 2500 mm at 1,0 mm
Year of manufacture 1979
Serial number: 612
Be7ejy3fdl
Foot switch defective
Dimensions LxWxH 3270x650x1050 mm
Prod-Masz is your competent and professional partner in the manufacture of sheet metal processing machines.
Trust, honesty and reliability are not empty words for us!
Small compact folding edge 1250cmm to steel sheet 0.8mm, aluminum sheets 1mm with beading machine
- Possibility of cheek adjustment
- Weight: 49 kg
- Bending beam: 15mm
- Working length: 1.25 m
- built-in beading machine -ᐳ tube diameter 14mm
- 60mm opening
- Bending radius: 145 degrees
Price: 800 euros
Roller shear optionally ...
3-roll round bending machine 6mm - 3000 lg
Buvm3luyux
Bending length 2035 mm
Bdsketcxn2
bending capacity 2,5 mm
Delivery time approx. 4-6 months from order placement
bending length: 2.035 mm
max. sheet thickness steel (420 N/mm²): 2,5 mm
max. sheet thickness stainless steel: 1,6 mm
bending angle: 0 - 135
motor power: 2,2 kW
length: 3.000 mm
width: 1.100 mm
height: 1.750 mm
weight: 1.950 kg
hydraulic drive NC control for bending angle preselectionmanual backgauge 600 mmthrough-going pointing rail 45°angle of front 75 mmmechanical end position adjust...
Working length: 2600 mm
Jw0wivl9
Folding capacity (steel): 8,0 mm
Folding capacity (stainless steel): 5,1 mm
Folding capacity (aluminum): 10,0 mm
Opening height: 350 mm
Control system: ProLink Touch Control
Back gauge: SBG 1650 mm adjustable high
Other configuration:
- Pneumatic clamp for upper tools
- CNC Crowing
- CNC Bending Centre adjustable
- Divided tools lower and bending beam
- High divided tools 102 and 152 mm
- Straight rail 35°
Press brake - Swivel bending machine
Schröder - 2m - 3,5mm
can be tested and loaded in 97249 Eisingen
Was in an institute and was sold there privately
If interest exists it could be acquired also segments optionally
G7tem8h
4 Rolls Hydraulic Plate Bending Machine
Bre3mi0ypo
The company "Prod-Masz" is an innovative medium-sized company that manufactures and sells sheet metal processing machines.
A professionally designed folding machine is the basis for years of use of the machine. It is therefore important to have a trustworthy company at your side.
Small, compact folding edge 1250 cm to steel sheet 0.8 mm, aluminum sheet 1 mm with built-in curl forming machine and roller shears.
Usm0z092j
- Possibility of cheek adjustment
- Weight: 49 kg
- Bending beam: 15mm
- W...
A laser cutter with unprecedented cutting accuracy. The fiber laser is equipped with HIWIN linear guides and TBI ball screws mounted on both sides of the laser cutter. The use of these components ensures excellent quality even at high laser cutting speeds. The laser housing complies with all safety standards and provides effective protection during the operation of the laser cutter.
Technical data:
- Working area - 1300x900 [mm]
- Source power - 1000 [W] IPG (possibility of increasing the power...
Bending length 2540 mm
bending capacity 4,5 mm
Delivery time approx. 4-6 months from order placement
bending length: 2.540 mm
max. sheet thickness steel (420 N/mm²): 4,5 mm
Lp3ci0c
max. sheet thickness stainless steel: 3 mm
bending angle: 0 - 135
motor power: 5,5 kW
length: 3.900 mm
width: 1.700 mm
height: 1.900 mm
weight: 5.100 kg
hydraulic drive NC control for bending angle preselectionmanual backgauge 600 mmthrough-going pointing rail 45°angle of front 75 mmmechanical end position adjustment ...
2040 x 3 mm, with hand stop and numerous RADIUS Rails, machine repaired by a qualified technician, tested, clean and is fully functional. Test run is performed.
Manual back gauge 650 mm
Color green
Machine weight 2600 kg
Wjz3w
Space 3300 x 1150 x 1930 mm
Motor output 64 kW
Opening width 300 mm
Bending angle 130 degrees
motorized swing bending machine make KRAMER type AMaut III
machine no. 48296, year of construction 1990
technical data:
working length 2540 mm
max. sheet thickness 2,5 mm
big opening of the upper beam 350 mm
adjustability of the lower and bending beam 90 mm
driving power 4,0 kW
duration of one working cycle 7,0 sec.
weight approx. 3750 kg
outside dimensions approx. 3600 x 1000 x 1500 mm
Xinxgqauo
used, in need of repair
very favourable as spare part carrier or for self-assembly
Hydraulic swivel bending machine
Fab. FASTI Typ. FP60 20-6
Very good condition, year 2007
Technical data
Make: Fasti Schroeder
Type: FP60 - 20- 6
Year of manufacture: 2007
working length: 2040 mm
Power: 6 mm
upper beam stroke: 500 mm
Bpwkfi28ld
bending beam adjustment: 80 mm
dimensions: approx. L 4,1 x W 3,4 x height 2,5 m
Weight: approx. 8 t
Equipment
- Motorized bending beam adjustment
- Hydraulic upper tool clamping
- Motorized bending center adjustment
- Pointed rail 45° sharp 2020mm
Po...
220 ton pressure, 4 axles, 3D graphic display, laser penetration protection, quick tool holder 6-axle rear stop. Weight: 12.7 tons Dimensions: 2m x 3.8m x 3m
Ibpdfcyn0
Hydraulic bending machines from one of the best manufacturers of Dr. Hochstrade engineering machine is very well built and equipped with a segmented Geisfusschine.
Beam can be adapted for good bending results even sheet thickness can be adjusted, etc power about 2 m - 2 mm steel tour before place possible weight approx. 3700 kg forklift to the loaded available
Bbrysketw8
Bending length 2035 mm
bending capacity 3,5 mm
Delivery time approx. 4-6 months from order placement
bending length: 2.035 mm
Nirf9
max. sheet thickness steel (420 N/mm²): 3,5 mm
max. sheet thickness stainless steel: 2,5 mm
bending angle: 0 - 135
motor power: 3,7 kW
length: 3.000 mm
width: 1.100 mm
height: 1.750 mm
weight: 2.200 kg
hydraulic drive NC control for bending angle preselectionmanual backgauge 600 mmthrough-going pointing rail 45°angle of front 75 mmmechanical end position adjustment ...
2020 x 2, 0 mm, 3.0 mm ALU, 1.25 mm VA, solid and stable design, with standard accessories, manual bending cheek reduction, with easy control,.
Machine repaired by a qualified technician, tested, clean and is fully functional. Test run is performed.
Note:
0chrsloh
Machine is located currently in the revision, the pictures originated before the revision. The engine was disassembled for repair work.
without rear gauge
Colour: light grey
Total power consumption: 400 V
Space required: 3400 x 700 m...
Motor. Universal swivel bending machine Fabr. PIECE man + HILLEN type AWR/M 2000/2
Masch.# M 05769061, built in 1976
Technical data:
Working width 2050 mm
maximum sheet thickness 2.0 mm
largest passage 3100 mm
Juiwqc0
Opening of the upper cheek 250 mm
Opening width of the lower beam 105 mm
Opening the beam 105 mm
largest opening width 200 mm
Power 0,75 / 3,0 kW
Weight 2850 kg
Ext 3900 x 1000 x 1700 mm
with
-powered upper -, lower -, and beam
-Foot switch
-Rear gauge
-rear sheet support
used, in...
Motorised DNC swivel bending Hezinger-FoldingLine
Inijk7h
Model HF-MFB2030
Bending length 2,050 mm
Sheet thickness ST / VA / aluminium 3.0 / 2.0 / 4.0 mm
Drive of the axes Y / Z / X 3.0 / 1.5 / 0.4 kW
Machine dimensions W x L x H 2,500 x 3,250 x 2,100 mm
Machines Weight approx. 3.500 kg
Basic equipment:
- 3 controlled motor axes: X Y Z
- Basic control ErFold BASIC with 15.6" touch screen
- Opening width of the upper beam 160 mm
- 45° upper cheek with tool 30° pointed rail
- Bending beam tool 2-f...
Used 6metre Ras up and down bend cnc folding machine for sale
Ras XXL Centre 75.06
System 9002 cnc control
RAS TECHNICAL DATA:
DIMENSION 75.06
Max. Sheet thickness (Steel 58000 PSI) gauge 16
Max. sheet thickness (Aluminium 29000 PSI) gauge >14
Max. sheet thickness (Stainless Steel
109000 PSI) gauge 18
Working length max. inch 251,97 / 6.4metre
Grippers Travel Range inch 0,47 – 29,53
Grippers Positioning Accuracy inch +/- 0,00...
mechanical plate roll bending machine
Fbcl3wmpg
thickness 30 m
Length 2500 mm
good working condition.
Bending length 3100 mm
bending capacity 4,5 mm
Delivery time approx. 4-6 months from order placement
bending length: 3.100 mm
max. sheet thickness steel (420 N/mm²): 4,5 mm
max. sheet thickness stainless steel: 3 mm
bending angle: 0 - 135
motor power: 5,5 kW
length: 4.500 mm
width: 1.750 mm
height: 1.950 mm
weight: 5.200 kg
hydraulic drive NC control for bending angle preselectionmanual backgauge 600 mmthrough-going pointed rail 45°advance angle 75 mmmechanical end position adjustment of the cla...
2500x2.5 mm, 4.0 mm aluminium, n good condition, with digital display/control POS400 without stop system, with standard rail incl. attachment rail 10 mm, with further top cheek rail and wide attachment rail, with sloping top cheek.
Machine is repaired, checked, cleaned and is then fully functional. Test run is performed.
Nybbf
without backgauge
Colour: light grey
Total power consumption: 16 A
Space requirement: 3800 x 1100 x 1600 mm
Machine weight: 3000 kg
without roller shear
Motor-driven bending machine make LOTZE Type HZK 25
No. 962061, year of construction 1952 - refurbished in 1962
Technical data:
Lddlh
max. working length 2500 mm
max. sheet thickness 3,0 mm
small inner bending radius 4,0 mm
gr. opening width of the upper beam 300 mm
Opening width of the bending beam 40 mm
Working height 800 mm
Drive power 3.5 / 2.2 kW
Dimensions 4200 x 1400 x 1600 mm
Weight approx. 3,75 t
with
- Shift lever gearbox for opening and closing,
Bending and backward movement
used, in...
Article number: MA1058
Manufacturer: Fasti
Type: vertical bending machine
Year of construction: 2001
Machine number: 00726004
Bending length [mm]: 3000
Bdknwcsacy
Control: Delem DZ-65 - VA3D
Length [mm]: 5350
Width [mm]: 2300
Height [mm]: 2200
Weight [kg]: 6510
Power supply: 380V / 17 KW
Usable height [mm]: 250
Maximum sheet thickness [mm]: 4
Table size Lxw: Backgauge 1500 CNC controlled
Accessories: manual / schematics
max. working width: 2020 mm
for metal sheets up to: 2,5 mm
Nxdu2
opening width top clamping bar: 80 mm
adjustment bending cheek: 80 mm
clamping bar drive: 1,5 kW
below cheek drive: 2,2 kW
electrical connection: 380 V kW
weight: 2000 kg
space needed: 2900 x 1100 x 1470 mm
bending length 2080 mm, bending capacity 4 mm, back gauge with hand wheel, foot pedal, dimensions 3100x1550x1500 mm, approx. 4000 kg
Bcqaufji
Bending length 4010 mm
Dixmnawn
bending capacity 2,0 mm
Delivery time approx. 4-6 months from order placement
bending length: 4,010 mm
max. sheet thickness steel (420 N/mm²): 2,0 mm
max. sheet thickness stainless steel: 1,2 mm
bending angle: 0 - 135
motor power: 2,2 kW
length: 5.600 mm
width: 1.750 mm
height: 2.050 mm
weight: 5.000 kg
hydraulic drive NC control for bending angle preselectionmanual backgauge 600 mmthrough-going pointing rail 45°angle of front 75 mmmechanical end position adjustme...
2000 x 2, 0 mm, with accessories, foot switch, simply angle rotation wheel, with RADIUS track and new hot rail (in order), machine was by an expert repair, check, clean and fully functional.
7xonm2t7h
Test run was carried out. Color: Green
Motorized swivel bending machine make HERA type UM III
machine # 2013
Technical data:
working width 2520 mm
max. sheet thickness 3,0 mm
Smallest flange height with largest sheet thickness 16 mm
Smallest inner bending radius with maximum sheet thickness 4.5 mm
max. opening width of the upper beam 350 mm
max. adjustability of lower and bending beam 125 mm
largest diameter for rounding 250 mm
Engine power 5,5 PS
Dimensions 3600 x 1200 x 1750 mm
Weight approx. 3500 kg
Dsjnc3x
with
- Foot switch
used
Article number: MA1041 the machine is in a mint condition
Manufacturer: Dr. Hanlon
Type: SBM 200015
Year: 2010
Machine number: 1291210211
Folding length [mm]: 2000 /-driven Backgauge
Control: Tochscrenn PLC
Length [mm]: 2000/3400
Width [mm]: 3900
M8oct
Height [mm]: 2550
Weight (kg]: 7000)
Rated power: 380V / 7,5KW
Stroke [mm]: 250
Maximum sheet thickness [mm]: 15
Accessories: tool frame / second set tools / operating instructions
max. working width: 2040 mm
for metal sheets up to: 3 mm
opening width top clamping bar: 90 mm
Be9b3ajon8
adjustment bending cheek: 90 mm
clamping bar drive: 1,5 kW
below cheek drive: 4 kW
electrical connection: 380 V kW
weight: 2600 kg
space needed: 3050 x 800 x 1350 mm
