Center Lathe

ZMM C 10 THS

Condition: good (used), functionality: fully functional, Original CNC (not a retrofit from conventional to CNC) Control: Siemens 8-M Faceplate diameter: 3500 mm Max. turning diameter: 4000 mm Max. turning height: 2500 mm Vertical stroke of ram: 1600 mm Horizontal stroke of ram: 2200 mm Ram cross-section: 250 x 210 mm Min. internal diameter: 360 mm Vertical travel of cross-slide: 2000 mm/min Chuck motor power: 71 kW Chuck speed: up to 90 rpm (2-speed gearbox) Table load capacity: 40 tons Feed rate: 1000 mm/min Rapid traverse: 6000 mm/min Dodpfx Aoxyh Hveg Hjuu

Condition: reconditioned (used), Year of construction: 2014, functionality: fully functional, spindle speed (max.): 10,000 rpm, type of input current: three-phase, grinding wheel diameter: 250 mm, overall weight: 8,100 kg, feed rate X-axis: 20 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 20 m/min, travel distance X-axis: 380 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 280 mm, grinding spindle motor power: 15,000 W, table length: 500 mm, table width: 330 mm, input voltage: 400 V, CNC Tool grinding machine SCHNEEBERGER Gemini DMR TECHNICAL CHARACTERISTICS: Year of manufacturing: 2014 CNC control: FANUC 31i B5 Software installed: Quinto Qg1 Colour touchscreen: Yes Number of axes: 5 Stroke X axis: 380 [mm] Max. Stroke speed X axis: 20000 [mm/min] Resolution X axis: 0.0001 [mm] Stroke Y axis: 300 [mm] Max. Stroke speed Y axis: 5000 [mm/min] Dujdpjywzayefx Ag Hju Resolution Y axis: 0.0001 [mm] Stroke Z axis: 280 [mm] Max. Stroke speed Z axis: 20000 [mm/min] Resolution Z axis: 0.0001 [mm] Table length: 500 [mm] Table width: 330 [mm] Grinding spindle attachment: HSK-50 Max. grinding wheel speed: 10000 [rpm] Grinding spindle motor power: 15 [kW] Max. diameter grinding wheel: 250 [mm] Weight: 8100 [Kg] INCLUDED EQUIPMENT: x1 grinding wheel changer with 8 positions x1 FANUC 6-axis robot, type LR Mate 200iC 5L x3 HEIDENHAIN linear glass scales on all X, Y, and Z axes Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machine for sharpening tools such as milling cutters, taps, and drills. Machine comparable to brands such as Blohm, Elb, Ewag, Favretto, Fenix, GER, Jones & Shipman, Jung, Karstens, NUMAFFUT, Okamoto, Okuma, Saacke, SMP, Studer, Vollmer, and Walter. Also consider cylindrical or surface grinding machines, lathes, machining centers, and milling machines.

Year of construction: 2023, condition: new, Aluminum angle conveyor belt with substructure including adjustable feet and machine feet to level unevenness horizontal area: 3,750mm rising area: 3,200mm angle of inclination at the bend 45° total conveyor belt length measured on the ground: 6,000mm discharge height: 2,500mm horizontal height: 250mm design: aluminum construction Dedpoht Uzaefx Ag Hjuu - double profile reinforced 90x45mm drive roller + deflection roller S235 steel welded and machined Ø100x520mm crowned, shaft fixed with clamping bearings. Drive: slip-on gear motor 0.55KW, speed 0.3m/sec Connection 230/400V, 50Hz protection class IP54 Drive ready for connection to motor terminal box (commissioning must be carried out by a qualified electrician) PVC conveyor belt DM 10/2 0+005 PVC including corrugated edges PVC green Conveyor belt width: 500mm 2 corrugated edges 40 high, 35mm wide, high frequency welded 46 T-40 studs, approx. 300mm pitch Belt material: 2-ply, particularly stable across the belt In the bend area, the belt is guided on both sides with 3 hold-down rollers each. The belt is designed with a 70mm edge-free zone on both sides. Due to the corrugated edge on both sides, the usable width of the conveyor belt is reduced: Usable width: 290mm, results as follows: (top view) transverse arrangement 70+35+290+35+70mm Our core competence lies in supplying the customer with exactly what he really needs. Together with our customers, we work out customer-specific, individual solutions and supply corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application. Conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator

Condition: excellent (used), For sale: professional cutter and drill bit sharpener, model PP U3. Condition: very good, complete unit ready for operation. Included in the set: • Set of grinding wheels • Adjustable angular tool holder • Workshop lamp with flexible arm • Keys and clamping elements Specifications: • For sharpening cylindrical and spiral end mills • For sharpening step and cylindrical drills Dsdpsxdh Hqsfx Ag Hsuu • Wheel linear speed up to 35 meters per second • Maximum noise level: 66 dB • Machine weight: 41 kg Solid, stable construction—ideal for precise tool machining. A reliable solution for tool rooms, CNC workshops, and machine shops.

Condition: new, Year of construction: 2024, SM11 spray cleaning system Supplied as standard with: - Single washing tank. - Basket movement by gear motor. - Timer for setting the washing time. - Electrically adjustable heating. - Stainless steel washing pump. - Removable coarse filter in the tank. - Electronic control of correct lid closure. - Level sensor / protection for too low level. - Tank drain with ball valve for bath change. Available in various configurations with: - Whole system thermal insulation. - 50-100 micron bag filter. - Vapor aspirator. - Drying with fan and electric heating elements. - Drying with high-pressure blower and air blade. - Oil separator. Dujdpfx Asrwmyhsg Hou - Automatic water filling. - Emptying pump. Technical characteristics: - Basket diameter: ø1100 mm. - Internal useful height: 700 mm. - Maximum allowable weight: 250 kg. - Tank volume: 260 Lt.

Condition: new, Year of construction: 2025, functionality: fully functional, turning diameter over cross slide: 235 mm, spindle bore: 52 mm, turning diameter: 400 mm, center height: 200 mm, turning length: 1,000 mm, Lathes Series PREMIUM CU 400 RD-Vario Our universal lathes and lathes with stepless speed control from the PREMIUM CU series feature a wide range of features and accessories for customers across various industries. The PREMIUM CU series allows precise adjustment of cutting speed to suit material and turning diameter – especially advantageous for non-ferrous metals, plastics, and for achieving perfect surface finishes on precision parts and fits. A notable highlight is the integrated R/L control units mounted on the tool slides, enabling simple switching between clockwise and counterclockwise spindle rotation. These replace the conventional shift rods typically found on universal lathes. The machine is equipped with electromechanical spindle brakes for extremely fast spindle stops, ensuring efficient handling. The leadscrews are fitted with overload protection. Performance Data and Specifications: Center distance: 1000 mm Center height: 200 mm Swing over bed: 400 mm Swing over cross slide: 235 mm Swing without bridge: 550 mm Bed width: 320 mm Cross slide travel: 235 mm Top slide travel: 110 mm Maximum turning tool cross-section: 25x25 mm Chuck mounting: DIN 55027 No. 6 Spindle (main spindle) taper: MK 6 mm Spindle bore: 52 mm Speed Range 1, stepless: 18 – 98 rpm Speed Range 2, stepless: 48 – 265 rpm Speed Range 3, stepless: 144 – 790 / 385 – 2120 rpm Longitudinal feeds (80): 0.015 – 0.6 mm/rev Cross feeds (80): 0.0075 – 0.3 mm/rev Metric thread pitch (40): 0.25 – 7.5 mm Metric module threads (40): 0.0625 – 1.875 mm Inch threads, TPI (40): 120 – 4 TPI Inch module threads, TPI (40): 480 – 16 TPI Tailstock quill taper: MK 4 Tailstock quill diameter: 50 mm Tailstock quill stroke: 100 mm Motor power: 7500 W Power supply: 400/50 V/Hz Total length: 2350 mm Total height: 1330 mm Weight: 1590 kg Standard Equipment: - RÖHM 3-jaw chuck - 5-piece quick-change toolholder set - Halogen machine lamp - Emergency stop button / no-voltage release - Chuck guard with safety switch - Tool slide with splash guard - Machine base / chip tray / splash wall - Tool set / operating manual / CE PREMIUM CU Series Standards: - Heavy-duty grey cast iron machine bed, excellent vibration damping - Removable bridge - Prismatic guideways - Hardened and precision-ground main spindle, high concentricity, adjustable precision bearings - Smooth-running main spindle and feed gearbox in oil bath - Gears made of case-hardened chromium-nickel steel, hardened and precision ground - Feed reverse function - Covered trapezoidal thread leadscrew, hardened, precision ground - Tool slide with locking nut - Precisely adjustable slideways - Solid tailstock with offset - Machining accuracy according to DIN standards Dodpfx Agey Hlxfs Hsuu Including 3-axis digital position display This machine is available for immediate delivery and can be viewed at our showroom in 71334 Waiblingen-Beinstein. For information on equipment, please contact us.

Condition: ready for operation (used), Year of construction: 1984, spindle speed (max.): 800 rpm, spindle motor power: 16,000 W, total height: 1,800 mm, overall weight: 7,300 kg, number of axes: 2, This Poreba TPK 90/5M horizontal turning machine was manufactured in 1984. It features a swing over bed of 930 mm, a spindle bore diameter of 95 mm, and can handle workpiece weights up to 9,000 kg with two steady rests. It includes a tailstock, coolant pump, chuck guard, and tool holder. Consider the opportunity to buy this Poreba TPK 90/5M horizontal turning machine. Contact us for more information about this machine. Additional equipment • Standard equipment includes Coolant pump, Chuck guard, Tool holder • Optional equipment available: 3- or 4-jaw chuck, various diameters and versions • Digital Read Out (DRO) for 2 axes, incl. display, installation, and calibration • Steady rest 40–400 mm with rollers • Steady rest 400–600 mm with rollers Dusdpfeyaqinjx Ag Hou • MULTIFIX quick-change tool post Machine Benefits Technical Machine Benefits • Distance between centers / turning length: 5000 mm • Swing in gap: 1200 mm • Maximum workpiece weight between centers: 6000 kg • Maximum workpiece weight between centers + 1 steady rest: 7500 kg • Maximum workpiece weight between centers + 2 steady rests: 9000 kg • Number of feeds: 80 • Feed range (mm/rev): - longitudinal: 0. 1 – 12. 8, - cross: 0. 05 – 6. 4 Extra Information Machine completly overhauled. Comes with 12 months warranty. Dimensions Machine Depth 7500 mm

Condition: new, neu Bulgarien 109100 € 2061.99 € 890 mm 3000 mm 400 mm 155 mm 490 mm 700 mm 15 160 M 24 160 0.032 - 38.9 mm/U 0.016 - 19.45 mm/U 0.5 - 480 mm 60 - 1/16 Gänge/" 525 mm 270 mm 125 mm 6 MK 260 mm Dsdpfowirxqex Ag Houu 22 kW 7500 kg driven by manual transmission 3-axes digital readout quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.500 mm € 94 720,00 turning length2.000 mm € 98 220,00 turning length4.000 mm € 117 110,00 turning length5.000 mm € 128 100,00 turning length6.000 mm € 144 630,00

Condition: used, Year of construction: 2018, operating hours: 8,491 h, Drive: Wheel Please contact Kristoff Van Havere for more information - Tiltrotator Kinshofer TR19 - Bucket 1800mm - Piping for hammer and sorting grab - Central grease system Dodoy I I Hhopfx Ag Houu

Condition: new, neu ca. 4 Monate ab Auftragse Bulgarien 131720 € 2489.51 € 1020 mm 2000 mm 510 mm 358 mm 770 mm 560 mm 361 M 12 6,3 - 3 1/min 2 0.039 - mm/U 0.02 - 7.5 mm/U 76 0.5 - 0 mm 60 - 1/5 Gänge/" 0.125 - 37.5 240 - 4/5 505 mm 270 mm 105 mm 6 MK 225 mm 18,5 kW 6400 kg Their main purpose is to process pipes. Accordingly, this type of machines is widely used in the oil industry. Oil country lathes have large capabilities of processing inner and outer cylindrical and conical threads on pipes with large diameters. The clamping of the pipes with two universals and stands allows the processing of long pipes. These lathes are suitable for producing elements and equipment for the oil industry, as well as for maintaining such facilities. Drive via gearbox Electrodynamic brake 3-axis digital display Fagor Quick-change tool holder Amestra type D1, system like Multifix including 4 holders (3x rectangular, 1 round) 2 pcs. 3-jaw chuck Bison 3295 Dm. 660 mm on both sides of the spindle, max. 250 rpm,gripping range 5-400 mm. Option: hard top special jaws (outside only), gripping range 80-400 mm 2 pcs. steady rests on supports Dm. 160 - 360 mm with rollers Rapid traverses (4) Longitudinal stop for one position Taper turning device Coolant device Full length rear splash guard Lead and feed spindle cover Lathe chuck protection Tool holder protection Leveling bolts and plates Dujdpfxewiq Dro Ag Heu Tailstock Reducing sleeve for the tailstock sleeve Mechanical movement of the tailstock with handwheel Low voltage machine light Operating instructions Equipment according to "CE" regulations Further models with spindle bore from 5 to 358 mm, centre distances from 1000 to 6000 mm and with turning diameters from 730 to 1020 mm are available on request.