Lifting table

'Pfaff Silberblau' Hubtisch | Hubtisch

Condition: new, 900 mm 900 mm 900x900 mm Lhjdpofg E Hpefx Adwob saw band length 9300 x 67 x 1,1 mm table height 790 mm band speed 14 - 60 m/min total power requirement 11 kW weight of the machine ca. 8,45 t dimensions 4,485 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Condition: new, with planing spindle Type R-R-RP1300 Working width 1300 mm Ledpfod H Sc Esx Adwehb Min. working length 538 mm Working thickness 3-110 mm Feeding speed 6-30 m/min Total motor power 77,12 kW Motor for first unit 22 kW Motor for second unit 30 kW Motor for third unit 18,5 kW Abrasive belt size 1330x2200 mm Working air pressure 0,55mpa Volume of dust collection device 12000 m3/h Transport dimensions 3090x2020x2260 mm Weight 4700 kg

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 2024/121/47, saw blade diameter: 420 mm, GRAULE cross-cut and mitre saw Type ZS 170 N (tiltable) 400 Volt three-phase brake motor 2.2 kW Saw blade diameter 420 mm Saw blade holder 40 mm Cutting height 170 mm, Saw blade tilted to 45°: cutting height 115 mm, cutting length 410 mm incl. the following accessories: 1 pc. Machine can be tilted by hand crank from the rear on both sides from 90° to the left by 45° and to the right by approx. 30° to approx. 60° Lsdstwz Tljpfx Adwjhb 1 pc. Carbide circular saw blade 420x3.4/2.4x30 mm 48 WZ neg. for wood 1 pc. Machine stand

Condition: used, machine/vehicle number: 006211, Max. panel width: 4300 mm Lhsdpfjiwbfuex Adwjb Max. panel length: 2200 mm Main saw blade projection: 135 mm No of Grippers: 10 Second flexible pusher: yes Panel Rotation Station: yes

Year of construction: 2003, condition: excellent (used), machine/vehicle number: MBUT136, ! bargain price ! Price from 1150 euros R. Stahl 1-girder suspension crane, bridge crane, crane track, indoor crane, gantry crane Payload 250KG 7 cranes available: 4: Steel suspension crane NL 250KG, width 6.35m, track width 5.6m 5: Steel suspension crane NL 250KG, width 2.65m, track width 1.9m 6: Steel suspension crane NL 250KG, width 4.85m, track width 4.35m 7: Steel suspension crane NL 250KG, width 2.90m, track width 2.35m 9: Steel suspension crane NL 250KG, width 6.0m, track width 5.5m 10: Steel suspension crane NL 250KG, width 1.03m, track width 0.74m (1150 euros) 11: Steel suspension crane NL 250KG, width 1.65m, track width 1.25m Lhjdsigl R Ropfx Adwob Track width can be changed, end carriers are screwed with 8 screws. Tracks (IPE 200 - not available) Undercarriages can be adjusted to the carrier dimensions. incl. complete control, floor operation by means of a control bottle All cranes can be moved electrically in all 3 axes Lifting height/hook path approx. 4m Connection to 400V 16A, year of construction 2003 Very good condition, systems were only used for maintenance - hardly used Shipping by courier, collection preferred Location 75053 Gondelsheim Please ask for shipping prices according to zip code, we will make you a non-binding offer immediately!

Condition: excellent (used), honing diameter 1,5 - 165 mm stroke 80 - 160 mm Lodpfjwva Rnox Adwehb spindle turning speed range 200 - 2500 U/min stroke speed - under load 80 - 310 Hub/min total power requirement 0,9 kW weight of the machine ca. 0,6 t dimensions of the machine ca. 1,2 x 1,0 x 1,6 m

Condition: good (used), Year of construction: 2001, grinding length: 650 mm, grinding width: 525 mm, total height: 350 mm, table length: 600 mm, table width: 350 mm, Manufacturer: Geibel & Hotz Type: FS 635-Z SA Control: Digital read out Year of construction: 2001 Magnetic table 600 x 350 mm Closed housing for CE Automatic vertical lubrication SA Automatic lubrication Coolant tank Specifications Metric US Standard X - axis 650 mm Y - axis 525 mm Z - axis 350 mm Table length 600 mm Table width 350 mm Table load 400 Feed X - axis 35000 mm/min. Feed Z-axis 1000 mm/min. Grinding stone dimensions 300 x 50 x 76.2 mm Power output 3.7 kW Speed 2800 ? rpm Dimensions (estimate) length 3200 mm width 2000 mm height 2870 mm weight 2300 kg Lodpfx Adovdal Aowjhb Please note: The information on this page has been obtained from the manufacturer to the best of our knowledge and belief, and where possible, the information is given in good faith but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 3595, Ladies and Gentlemen, We are selling a Weiler Commodor B lathe built in 2001 with Heidenhain 3-axis digital readout. The machine has been extensively overhauled in our workshop. Among other things, the main spindle bearing and the lead/traction spindle bearing were completely renewed! Technically, geometrically and visually, the machine is in excellent condition, which you are welcome to see for yourself on site. Availability: on request Machine no. 3595 Ljdjthd Shspfx Adwehb Year of construction: 2001 Center height: 180mm Center width: 1000mm spindle passage: Ø 56mm max. spindle speed: 2000 rpm Tailstock taper mount: MK4 Feed range: 0.026 - 0.888 mm/rev Possible thread types: Metric, inch, module, diametral pitch Metric thread pitches: 0.35 - 12 mm Spindle brake: switchable Connected load: 4kW Dimensions: approx. 2.2x1.5x1m (LxHxW) Weight: approx. 1.8t Further equipment and accessories: 3-axis digital display, coolant device, chuck guard, pull-out chip tray, 3-jaw chuck Röhm, 4-jaw chuck Röhm, various clamping jaws... Our service promise to you: - We are a certified master company in the field of mechanical engineering - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - On request, we can completely or partially overhaul your chosen machine - On request, we can repaint the selected machine in the color of your choice E00f3g2rl - On request, you can also order additional accessories such as tools etc. directly - On request, we can install additional accessories such as safety devices etc. - We are happy to take care of shipping and/or installation

Condition: new, Bernardo Universal Turning Machine Master 360 Pro Peak 1000 mm Peak height 180 mm Orbital diameter via bed 360 mm Orbital diameter via creation * 502 mm Orbital diameter via paddling sled 220 mm Bed width 185 mm Spindle hole 52 mm Lsdpfx Adod I H Izewehb Spindle intake A4 55029, D1-5 Speed range (8) 70-2000 U/min Area Longitudinal Pros (32) 0.052-1,392 mm/U Area of planning precurs (32) 0.014-0.380 mm/U Metric threads (26) 0.4-7.0 mm Customs thread (34) 4-56 Gg/1 " Pinol diameter 42 mm Pinoline path 100 mm Pinol intake MK 3 Engine drop-off power S1 100% 1.5 kW (400 V) Engine recording power S6 40% 2.2 kW (400 V) Machine Measurement (B x T x H) 1825 x 750 x 1600 mm Weight about 576 kg * Bed length removable: 205 mm Delivery • 3-axis digital display i200 with LCD display • 3-baking lining DK11-200 mm/D5 • Planboard 200 mm/D5, according to A4 55029 • Fixed bezel-passage diam. max 70 mm • Running bezel-passage diam. max 60 mm • Coolant equipment • First filling with Shell Tellus 46 • Extractable late newfir • Tension 280 mm • Quadruple steel holders • Protection device for quadruple steel holders • Slip clutch • Micrometer longest strike • Thread watch • LED machine light • Reducer sleeve • Changes • 2 centering tips • Foot pedal with braking function according to CE • Engine with magnetic brake according to CE standard • Unterdesigned with drawers • Operating tool

Condition: new, Year of construction: 2024, == Exhibition machine == ALZMETALL column drilling machine ALZSTAR 40 SV with coolant unit B (option 25) (consisting of separate tank (33l), pump with motor protection switch, complete fitting) and LED machine light Standard equipment: Mushroom pushbutton, reversing switch (for clockwise and anticlockwise rotation), motor protection switch Infinitely variable speed adjustment, digital speed display, feed overload protection, protection class IP54, connection plug Spindle protection with electrical fuse Technical data: Drilling capacity steel E335 (St 60) 40 mm Thread cutting: Steel E335 (St 60) M 24 Cast iron EN-GJL-200 (GG20) M 30 Short spindle MK 3 Lhedpfx Aed Hy Elodwsb Spindle stroke 120 mm Projection 293 mm Column diameter 115 mm Machine table, usable support 514 x 360 mm T-slots, number x width x distance 2 x 14 x 224 mm Spindle-to-table distance min./max. 117/701 mm Feed rate 0.10 + 0.20 mm/rev Machine height without options approx. 1840 mm Net weight approx. 285 kg Drive stepless Motor 1500 / 3000 rpm Power 1.45 / 1.9 kW Spindle speed 160-2250 rpm