Used Travelling Crane for sale (14,584)

Condition: used, A total of 6 ABUS double-girder overhead cranes are for sale, each with a lifting capacity of 16,000 kg and a span of 16,155 mm. The cranes were manufactured in 1990, 1999, and 2000 and are equipped with ABUS electric wire rope hoists of the GM 6160 series. Manufacturer: ABUS Crane type: Double-girder overhead crane Lifting capacity: 16,000 kg Span: 16,155 mm Hoisting mechanism: Electric wire rope hoist Hoist series: ABUS GM 6160 Hoist types: GM6160F6 and GM6160L06 Year of manufacture: 1990, 1999, and 2000 Crane manuals are available. Location: Heilbronn Available quantity: 6 units Bjdpfx Abozvqdietjll The cranes underwent a complete service in 2026, and assistance will be provided during disassembly.

Condition: excellent (used), functionality: fully functional, Year of construction: 1999, machine/vehicle number: TH241-14/433886, operating hours: 131 h, ABUS ELV crane system crane runway bridge crane indoor crane crane Load capacity / lifting capacity: 5t - 5000 kg Gauge: 13,500 mm, overall width approx. 13,700 mm Year built: 1999, with floor control Lifting height: 6 m Overall height from crane top edge to hook approx. 1,020 mm (Girder: 540 mm + lifting gear: 480 mm) End carriage length with buffers approx. 270 cm SWP: Full load hours used: 131, theoretical remaining service life: 1,469 hours Crane is dismantled and immediately available Very good condition, inspection book is available Column-mounted slewing cranes and wall-mounted slewing cranes also available Blsdsx Ev Tkopfx Abtol Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Shipment by freight forwarding possible, please inquire with postal code Collection preferred

Condition: ready for operation (used), Span: 15,030mm, load: 6.3t, lifting height: 6200mm, weight: 5.3t, including documentation and Trolley SWF. Bljdpfx Abjhyxpmjtol

Year of construction: 2014, condition: ready for operation (used), Span: 3150mm, load: 6.3t, lifting height: 5450mm, weight: 2.85t, including documentation and Trolley SWF. Bedpjhyxpuefx Abtoll

Condition: ready for operation (used), Year of construction: 2025, A relatively new double-girder overhead crane Konecranes is available. Load capacity: 12t. Documentation available. An on-site inspection is possible. Blodpfoy Anuhsx Abtol

Condition: good (used), Crane system with two fixed (l= ~14.000 mm) and three running rails (l= ~6.000 mm) with trolleys which allow the mounting of log clamps with hoist. Tilt prevention system allows smooth and perfectly parallel displacing of the running rails. Max weight per rail = 1.000 kg. Mounted from ceiling (no supporting steel structure included). Power supply via integrated conductor line inside the rails (no external wires). Compressed air with outside air pipes (not inside the rails). Blsdpfx Asg Dgg Rsbtel Option: chain hoist with log clamp to lift logs from a pallet onto a stream feeder.

Condition: good (used), Crane system with two fixed (l= ~7.000 mm) and three running rails (l= ~5.000 mm) with trolleys which allow the mounting of log clamps with hoist. Tilt prevention system allows smooth and perfectly parallel displacing of the running rails. Max weight per rail = 1.000 kg. Mounted from ceiling (no supporting steel structure included). Power supply via integrated conductor line inside the rails (no external wires). Compressed air with outside air pipes (not inside the rails). Option: chain hoist with log clamp to lift logs from a pallet onto a stream feeder. Bodpfx Abog Dghcjtsll

Condition: good (used), Crane system with two fixed (l= ~6.000 mm) and three running rails (l= ~6.000 mm) with trolleys which allow the mounting of log clamps with hoist. Max weight per rail = 1.000 kg. Bsdpfx Abog Dgh Istjll Mounted from ceiling (no supporting steel structure included). Power supply via integrated conductor line inside the rails (no external wires). Compressed air with outside air pipes (not inside the rails). Option: chain hoist with log clamp to lift logs from a pallet onto a stream feeder.

Condition: good (used), Crane system with two fixed (l= ~7.000 mm) and three running rails (l= ~6.000 mm) with trolleys which allow the mounting of log clamps with hoist. Max weight per rail = 1.000 kg. Mounted from ceiling (no supporting steel structure included). Blodpog Dgdvjfx Abtsl Power supply via integrated conductor line inside the rails (no external wires). Compressed air with outside air pipes (not inside the rails). Option: chain hoist with log clamp to lift logs from a pallet onto a stream feeder.

Condition: excellent (used), Travel wheel axle for crane undercarriage, friction wheel, travel wheel for bridge crane, indoor crane, assembly crane, workplace crane -Travel wheel axle: for crane trolley -Type: D=120x649.5 Part 3 Crane 1/2 .: 1031 4148 -Dimensions: see photo technical drawing Bodpfx Asv N A Hajbtell -Number: 3x axle available -Price: per piece -Dimensions: Ø 120 x 649.5 mm -Weight: 35 kg/piece

Condition: good (used), Travel wheel axle for crane undercarriage, friction wheel, travel wheel for bridge crane, indoor crane, assembly crane, workplace crane Bodov N A Htopfx Abtjll -Travel wheel axle: for crane trolley -Type: D=120x320 -Dimensions: see photo technical drawing -Number: 1x axle available -Dimensions: Ø 120 x 320 mm -Weight: 25 kg

Condition: excellent (used), Travel wheel axle for crane undercarriage, friction wheel, travel wheel for bridge crane, indoor crane, assembly crane, workplace crane -Travel wheel axle: for crane trolley -Type: D=90x244 -Dimensions: see photo technical drawing -Number: 3x axle available -Price: per piece -Dimensions: Ø 90 x 244 mm -Weight: 10.4 kg/piece Bjdpev N A Hysfx Abtell

Condition: good (used), Travel wheel axle for crane undercarriage, friction wheel, travel wheel for bridge crane, indoor crane, assembly crane, workplace crane -Travel wheel axle: for crane trolley Bsdpov N A Ikofx Abtoll -Type: D=110x550 -Number: 1x axle available -Dimensions: Ø 110 x 550 mm -Weight: 38.9 kg

Condition: good (used), Travel wheel axle for crane undercarriage, friction wheel, travel wheel for bridge crane, indoor crane, assembly crane, workplace crane -Travel wheel axle: for crane trolley -Type: D=240x545 -Number: 1x axle available -Dimensions: Ø 240 x 545 mm Bljdjv N A Iqjpfx Abtel -Weight: 70 kg

Condition: like new (used), functionality: fully functional, Year of construction: 2019, machine/vehicle number: EM109, 1x Mobile, pivoting column slewing crane, traveling crane Type Kaltenbach WK-SL - Year of manufacture 2019 Load capacity at full outreach: 600 kg / 0.6 tons Overall height: approx. 4.4 m, Outreach: approx. 3.1 m Hook height: approx. 3.4 m, Lower edge of boom: 3.85 m Base dimensions: approx. 110 x 110 cm Column with counterweight incl. ABUS 600 kg GM chain hoist, cable carrier, and accessories Total weight: approx. 5000 kg (counterweight: approx. 3300 kg) Bledezlqbmjpfx Abtjl Connection via CEE plug to 400 V, slewing range 270° Very good condition, almost new, fully functional. Item location is 75053 Gondelsheim Only the crane system shown in the pictures is being sold. See pictures. Shipping via freight forwarder or collection.

Condition: like new (used), 2 crane travel motors, crane drive, crane bridge with frequency control, almost new Bedpfx Ajv T Tmrjbtjll SEW crane travel drives, complete with control cabinet Control system with frequency inverter! Frequency-controlled crane travel. The motors come from the dismantling of almost new cranes after the demolition of a hall. The drives have only run for a short time or not at all. Here at a top price!

Condition: used, Crane motor, travel drive crane bridge drive with gearbox Sliding anchor motor, sliding anchor motor, three-phase electric motor, brake motor, crane motor, cable drive, crane drive, hoist motor, fine hoist motor Manufacturer: DEMAG Motor type: 24/10 KF8-2 Motor No.: 982869 Motor type: B5 Rated voltage: 380 VAC Rated frequency: 50 Hz Power stage 1: 0,58 kW = 715 rpm. Power stage 2: 2,3 kW = 2900 rpm. with gearbox DEMAG type KS 12 Reduction gearbox fabric. no. 1909104 gear ratio: i = 118 Blodpfx Absptlblotol with impeller for crane rail 2 pieces available, price per piece

Condition: excellent (used), Year of construction: 2008, overall weight: 1,20,000 kg, main lifting speed: 3 mm/min, working height: 10,000 mm, Double hoist 60 + 60 Ton Lifting class H2 Bsdpfx Abexmf R Sjtjll Freqence vario speeds Hoist ABUS GM 7600U6 FEM Group 1Am Ikusi remote (TM70 2.13) Little used / Under power / Direct availebel Span: 31820mm Lift height: 10000mm Capacity Kg: 120000 Lifting speed:0,50 - 3,30 M/Min Hoist trolley:5/20 M/Min Crane driving:1/20 M/Min Length: 31820mm Width: 4500mm Height: 2300mm Weight: 86000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), functionality: fully functional, DEMAG Crane Overhead System KBKII-R crane system Workshop crane Overhead traveling crane Original price: over €40,000.00 Includes left-hand switch item no. 87396344 (alone, original net price €11,000.00) 6x 6m straight sections 2x 5m 4x 2m 3x 1.5m (Total of 60 running meters of straight rail with integrated, internal busbar – no festoon cable required!) 2x 90-degree curve KBKII-R Supplied with all necessary parts such as trolleys, suspension hangers, clamps, etc. Option: 4x DEMAG electric chain hoist PK5 N-F 500kg, 2 speeds (included with system but not binding), very good condition. Bledpfxjv Uvdps Abtsl System in inspected condition with inspection logbook, fully functional and ready to use immediately. Info: Over 20,000 DEMAG spare parts in stock! Please also check out my other available inventory offers!

Condition: used, functionality: fully functional, Year of construction: 2000, machine/vehicle number: 201381, load capacity: 10,000 kg, Kuli overhead crane / workshop crane 10t – gauge 19,120 mm – year of manufacture 2000 For sale by auction For sale is a used Kuli overhead crane / workshop crane in good, immediately operational condition. The crane is ideally suited for production halls, workshops, steel construction, or industrial applications. Technical data Manufacturer: Kuli Type: Overhead crane / workshop crane Year of manufacture: 2000 Load capacity / lifting capacity: 10,000 kg (10 t) Gauge: 19,120 mm Overall dimensions including end trucks: approx. 19,360 mm Control: Floor control Overall height from top of crane to hook: approx. 1,600 mm Lifting height of hoist: approx. 5,240 mm Condition The crane is in good used condition and was in operation until recently. Inspection under power is possible by arrangement. Dismantling / Availability The crane will be dismantled in week 27. Until then, the system can be inspected on site. Location AQUAtec Master in Metal GmbH Bsdpfx Aoy Tlf Sebtell Note Loading and transport by arrangement. Subject to errors and prior sale.

Condition: excellent (used), functionality: fully functional, 15 new DEMAG crane travel motors / crane motors, some with gearboxes KBF / KBA 71 80 90 100 112 125 140 160 Very good used and tested condition Well below manufacturer's retail price Bedov Uvuhspfx Abtjll Info: We have over 20,000 DEMAG items in stock! Over 20,000 DEMAG spare parts in our warehouse! Check out my other offers from my inventory!

Condition: new, DEMAG hoist motors / crane motors / travel motors / drive motors: 1. Hoist motor type - MBV 132 C 12/2 - 1 piece (new). 2. Hoist motor type - MBV 100 A 12/2 - 1 piece (new). 3. Hoist motor type - ZNK 100 A 8/2 - 10 pieces (new). 4. Hoist motor type - ZNK 80 A 8/2 - 1 piece (new). 5. Travel motor type - ZBF 90 B 8/2 - 2 pieces (new). 6. Travel motor type - ZBS 80 b 12 - 8 pieces (new). 7. Travel motor type - ZBA 132 AL B050 - 1 piece 8. Travel motor type - KBA 80 B4 - 1 piece (new). 9. Traction motor type - KBA 90 B4 - 2 pieces 10. Traction motor type - ZBA 80 A4 - 2 pieces 11. Lifting motor type - 24/14 K4 P - 1 piece 12. Lifting motor type - 13/6 KF2 - 1 piece 13. Lifting motor type - 13/6 L4 - 1 piece 14. Traction motor type - 13/6 KF 8-2 - 2 pieces Bledpfju U Uznox Abtsl

Condition: excellent (used), functionality: fully functional, DEMAG 635 H13 hoist, complete Load capacity 10,000 kg, 4/1 reeving Good condition Free delivery within Germany! Info: 20,000 DEMAG spare parts and components in stock! Demag parts warehouse Blsdsv T Tigopfx Abtjl

Condition: excellent (used), functionality: fully functional, 8 large, high-power DEMAG travel drives complete with gearbox and travel wheel / DRS wheel block for crane bridge Bledpfjv T Tf Uex Abtjl From large DEMAG spare parts stock, see also my other offers Low hours, very good condition, offered due to dismantling of factory hall Motor: ZBF100 A4 B050 Gearbox: ADK70 QD Wheel: DRS 315 (manufacturer's new price approx. €3,000.00 net per unit) Price: €4,490.00 each, complete For purchase of 8 units: €3,490.00 each net Info: We have over 20,000 DEMAG items in stock! Check my other offers from stock as well!

Condition: refurbished (used), Various Crane / Depa pumps, various designs and sizes, cpl. refurbished and available at short notice Bledpfxofcy A Io Abtjl