Service Zentrale Berlin SZBG Bearbeitungszentren GmbH

Condition: ready for operation (used), Year of construction: 2002, operating hours: 19,300 h, functionality: fully functional, turning length: 750 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 185 mm, travel distance Z-axis: 750 mm, swing diameter over bed slide: 320 mm, TECHNICAL DETAILS Swing diameter over bed: 320 mm Swing diameter over cross slide: 150 mm Turning length: 750 mm Lhodpfx Adsycuvkswsb Travel X-axis: 185 mm Travel Z-axis: 750 mm Bar capacity: 52 mm Spindle speeds: 4,000 rpm Spindle nose: 55027/A6 DIN Spindle drive: 9 kW Rapid traverse X-axis: 10 m/min Rapid traverse Z-axis: 8 m/min Tailstock quill diameter: 70 mm Tailstock quill stroke: 120 mm Tailstock taper: MT 5 MACHINE DETAILS Control: Heidenhain Manuel Plus Dimensions & Weight Machine dimensions: 2,450 x 1,668 x 1,825 mm Machine weight: approx. 2.0 t Operating hours: approx. 19,300 h EQUIPMENT 3-jaw chuck Tailstock Multifix size B Documentation

Condition: ready for operation (used), operating hours: 28,339 h, functionality: fully functional, turning length: 450 mm, turning diameter: 300 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 160 mm, controller model: Siemens 840D ShopTurn, TECHNICAL DETAILS Turning diameter: 300 mm Turning length: 450 mm X-axis travel: 160 mm Main spindle speed range: 5,000 rpm Counter spindle speed range: 5,000 rpm Bar capacity: 65 mm Tool holder: VDI 30 Driven tool stations: 12 Driven tool speed: 5,000 rpm Rapid traverse X-axis: 60 m/min Rapid traverse Z-axis: 45 m/min MACHINE DETAILS Control: Siemens 840D ShopTurn Dimensions & Weight Required space with chip conveyor: 6,895 x 2,284 x 1,885 mm Machine weight: approx. 4.3 t Operating hours Power-on hours: 59,643 h Spindle hours: 28,339 h EQUIPMENT Chip conveyor Sub spindle Hainbuch collet chuck 65 mm Hainbuch collet chuck 42 mm Parts catcher Conveyor belt Lhjdoycupqopfx Adwob C-axis Driven tools Documentation

Condition: good (used), Year of construction: 2011, CNC Swiss-type automatic lathe Make: STAR Model: SR-32 J Type N Year of manufacture: 2011 Equipped with: FANUC 32i Model B control Synchronous spindle Lodpfeycqx Ijx Adwohb Live tooling C-axis Subsequent machining (backworking) High-pressure pump Chip conveyor Parts conveyor Oil mist extraction unit Bar feeder: FMB TURBO 3-36

Condition: used, Year of construction: 2007, swing dia. 430 mm Distance between the spindles 1450 mm control MAZATROL 640T x-axis 310 mm z-axis 605 mm spindle tunring speed 4.000 U/min In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical Features & Accessories: - Gantry Loader Accessories, tools, and clamping devices shown are only included in the scope of delivery Lsdpfx Adsyb S Nrswjhb if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 2006, turning diameter 320 mm centre distance 1190 mm control MAZATROL 640T spindle tunring speed 5.000 U/min spindle bore 61 mm bar passage 51 mm x-axis 240 mm y-axis 100 mm z-axis 495 mm Ledpfxjyb S Nlo Adwehb In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: good (used), Parts shown by hand not come. Lsdpsyb R Erefx Adwshb

Condition: ready for operation (used), + Fully operational + See the video + Includes tailstock, documentation, and chip conveyor + Free loaded on truck 📋 Full technical specifications – Mazak Quick Turn 15N Performance / Capacity Swing over bed: Ø 440 mm Swing over cross slide: Ø 254 mm Centre distance: 644 mm Standard turning diameter: Ø 150 mm Max. turning diameter: Ø 254 mm Max. machining length (chucking work): 451 mm Max. machining length (shaft work): 433 mm Workpiece weight (chucking work): 100 kg Workpiece weight (shaft work): 150 kg Max. bar diameter (with hollow chuck): Ø 51 mm Axes X-axis Travel: 180 mm Rapid traverse: 30,000 mm/min Z-axis Travel: 510 mm Rapid traverse: 30,000 mm/min Spindle Speed range: 45 – 4,500 rpm Number of speed ranges: 1 Spindle nose: JIS A2-6 Spindle bore: Ø 62 mm Spindle bearing inner diameter: front Ø 100 / rear Ø 90 mm Spindle bore taper: Ø 70 (1/20) Spindle drive motor: 15 HP Torque: up to 28.6 kgm Direct command: automatic: 1 rpm manual: 10 rpm Turret Turret type: 8-station / 12-station / 16-station drum turret (depending on version) Tool stations: 8 / 12 / 16 Tool shank size (external): 25 mm Boring bar shank diameter: Ø 40 mm Turret indexing time: 1 step: 0.48 s Full step: 0.85 s Turret clamping force: 4,300 kg Coupling diameter: Ø 210 mm Turret indexing: possible Tailstock Taper: MT 4 (dead centre) Max. quill thrust: 700 kg Quill diameter: Ø 80 mm Quill stroke: 130 mm Motors / Supply Spindle motor: 15 / 11 kW Feed motor X: 1.0 kW Feed motor Z: 2.0 kW Hydraulic motor: 1.5 kW Coolant pump motor: 0.18 kW Electric power requirement: 41.3 kVA Compressed air pressure: 0.5 MPa Air flow: 100 Nl/min Machine dimensions Machine height: 1,790 mm Footprint (W × L): 2,360 × 2,570 mm Machine weight (incl. control): 4,300 kg Bed type: horizontal Bed width: 340 mm Accuracies Lhodpeybcbrsfx Adwjb Positioning accuracy: X-axis: 0.008 mm Z-axis: 0.013 mm Repeatability: X-axis: ± 0.002 mm Z-axis: ± 0.003 mm

Condition: used, Year of construction: 2018, operating hours: 43,202 h, functionality: fully functional, Doosan Lynx 2100LM – CNC Lathe SPECIFICATION • Control: Siemens S828D • Main spindle max. speed: 6000 rpm • Main spindle motor power: 12.6 / 10.5 kW Ledpfxsya N Ipe Adwshb • Driven tool power: 6.2 / 4.1 kW • Tool stations: 12 • 3-jaw hydraulic chuck: 170 mm • Turning diameter (bed/turret): 600 / 400 mm • Max. workpiece size: Ø 300 x 510 mm • Max. bar diameter: 51 mm • Rapid traverse (X/Z): 30 / 36 m/min • Turret index time: 0.11 sec • Axis travel: o X: 205 mm o Z: 560 mm • Machine dimensions: 2540 x 1595 x 1693 mm • Machine weight: 3480 kg Equipment • High-pressure coolant, 0.7 MPa • Tool presetter • 8 static and 4 driven tool holders • Tailstock • Collet chuck • Parts catcher • Bar feeder preparation • 3 m LNS bar feeder • Chip conveyor (LNS MH500)

Condition: used, Year of construction: 2006, turning diameter 320 mm turning length 322 mm control Fanuc D -iT greates pass round over bed 510 mm x-axis 175 mm z-axis 330 mm spindle tunring speed 6.000 U/min spindle drive 15 kW number of tool places 12 Pos. auto power on hours ca. 43.947 In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Chip conveyor - Manual tailstock - Tool setter arm Lhodpfjya Ih Ijx Adwsb - Parts catcher with collection box Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: good (used), Year of construction: 2015, operating hours: 35,800 h, functionality: fully functional, Doosan Lynx 220LSY – Sub-spindle CNC lathe Ledpfjya Hqbox Adwshb SPECIFICATION Control: Fanuc 0iTD Main spindle max. speed: 6,000 rpm Main motor power: 15 / 11 kW Driven tool power: 3.7 kW Number of tool stations: 12 (24 positions) 3-jaw hydraulic chuck: 170 / 135 mm Swing diameter (bed/turret): 600 / 400 mm Max workpiece: Ø 300 x 510 mm Max bar diameter: 51 mm Rapid traverse (X/Y/Z): 36 m/min Y-axis travel: ±52.5 mm Turret indexing time: 0.11 sec Travel ranges: - X: 205 mm - Z: 560 mm Equipment: High-pressure coolant, 0.7 MPa Transformer Chip conveyor Tool setter Collet chuck (with 3 collets) Bar feeder for rods up to 1.5 m Workpiece ejector Workpiece catcher and outfeed system Tool load monitoring

Condition: good (used), Year of construction: 1996, Victor Vturn-20 CNC turning centre, 10 station tool holder, Fanuc Series 0-T CNC, swarf conveyor, fitted air bench, with Hydrafeed Multifeed MLI bar feeder, serial no. 2766 (1996) Lhsdpoyahz Isfx Adwsb

Condition: used, Year of construction: 1988, turning diameter 570 mm Lhodpfox U A Utox Adwsb turning length 2000 mm control ja weight of the machine ca. 3,5 t

Condition: new, Year of construction: 2024, functionality: fully functional, HYUNDAI-WIA SE2200M CNC LATHE WITH FANUC 0IT PLUS CONTROL AND C-AXIS MACHINE CONSTRUCTION & FEATURES  8” STANDARD CHUCK SIZE.  30° SLANT BED ONE PIECE HEAVY DUTY CAST IRON CONSTRUCTION FOR HIGH ACCURACY & RIGIDITY.  HIGH PERFORMANCE ROLLER LM GUIDEWAYS.  12 STATION HIGH SPEED RIGID SERVO DRIVEN TOOL TURRET - BMT45. [24 POSITION INCLUDED]  4,500 RPM HIGH POWER MAIN SPINDLE.  30 X 36 M/MIN RAPID TRAVERSE RATES - X & Z AXES.  C-AXIS MAIN SPINDLE.  ERGONOMIC DESIGN FOR EASY ACCESS TO CHUCK & TURRET. MACHINE CAPACITIES Swing Over the Bed Ø 600 MM Swing Over the Carriage Ø 390 MM Maximum Turning Diameter Ø 300 MM Maximum Turning Length 288 MM Bar Capacity - Main Ø 65 MM MAIN SPINDLE Chuck Size 8” Ø 203 MM Spindle Bore Ø 75 MM Spindle Speed (Rpm) 4,500 RPM Motor (Max / Cont.) 15.0 / 11.0 KW Torque (Max.) 167 NM Spindle Type BELT Spindle Nose A2-6 C-Axis Indexing 360° (0.001°) FEED Travel X 210 MM Travel Z 340 MM Rapid Speed X 30 M / MIN Rapid Speed Z 36 M / MIN Slide Type ROLLER LM GUIDE TURRET Number of Tools 12 [24 POSITION INDEX] Tool Size - OD 20 MM² Tool Size - ID Ø 32 MM Indexing Time 0.15 SEC / STEP LIVE TOOL Motor (Max / Cont.) 2.75 / 1.85 KW Milling Tool Speed 6,000 RPM Torque (Max.) 26.2 NM Collet Size ER 20 - Ø 13 Type BMT45 TAILSTOCK HYDRAULIC NC TAILSTOCK (STD LIVE CENTRE) Taper MT 4 Quill Diameter Ø 56 MM Tailstock Travel 580 MM TANK CAPACITY Coolant Tank 150 L Lubricating Tank 0.7 L POWER SUPPLY Electric Power Supply 18 KVA Thickness of Power Cable OVER 16 MM² Voltage 415V / 50HZ / 3PH MACHINE Floor Space (L x W) 2,220 X 1,610 MM Height 1,700 MM Weight 3,250 KGS INCLUDED FACTORY FITTED MACHINE OPTIONS CONVEYOR SIDE HINGED WITH CHIP BOX HIGH PRESSURE COOLANT SYSTEM 20 BAR IN LIEU OF STD CALL LAMP (3 COLOUR) - IN LIEU OF STD BARFEED INTERFACE - MAIN SPINDLE PARTS CATCHER - MAIN SPINDLE TRANSFORMER - 415V 3PH 50HZ QUICK TOOL SETTER - AUTO (RENISHAW) HYDRAULIC TYPE NC TAILSTOCK TURRET UPGRADE - 12 STATION 24 POSITION BMT45, LIVE TOOLS 6K RPM, 2.75 KW STANDARD FACTORY FITTED MACHINE OPTIONS CHUCK CLAMP FOOT SWITCH MAIN SPINDLE 8 INCH 3 JAW HYDRAULIC CHUCK STD INC SET SOFT JAWS - MAIN SPINDLE CHUCK OPEN / CLOSE CONFIRMATION DEVICE MAIN SPINDLE STANDARD HYDRAULIC CHUCKING CYLINDER - HOLLOW 15" MONITOR FOR FANUC FOR STANDARD CNC SPECIFICATION - SEE MANUFACTURER'S BROCHURE HW ENERGY SAVING SYSTEM (HW-ESS) MACHINE GUIDANCE (HW-MCG) MANUAL VIEWER OPERATION MEMO PREMIUM TOOL OPERATION SCHEDULING SMART GUIDE-i (CONVERSATIONAL PROGRAMMING) STANDARD COOLANT SYSTEM (NOZZLE) Lhjdpfx Asx Trgcedwjb STANDARD COOLANT SYSTEM 0.5 BAR STANDARD COOLANT TANK 150 LITRES FRONT DOOR INTERLOCK FULL SPLASH GUARDING SYSTEM STANDARD HYDRAULIC UNIT 35 BAR (15 LITRES) CALL LIGHT (1 COLOUR) BACK SPIN TORQUE LIMITER TOOLBOX STANDARD TOOLING PACKAGE

Condition: used, Year of construction: 2022, operating hours: 2,200 h, functionality: fully functional, We offer a Doosan Lynx 2100LSY CNC turning center in very good working condition, suitable for high-precision and high-productivity machining. Year of manufacturing: 2022. Key features: 2 spindles (main & sub-spindle) Y-axis Live tooling High rigidity and accuracy Ideal for complex, one-setup complete part machining Well maintained, regularly serviced Typical applications: Automotive components Hydraulic parts General precision engineering Medium to high volume production Machine condition: Fully functional, under power, available for inspection. Quantity: 1 machine Lhodpfxjx Tf Tco Adwjb Location: Europe Availability: Immediately/upon agreement Price and detailed specifications available on request.

Condition: excellent (used), Year of construction: 2021, operating hours: 6,400 h, functionality: fully functional, turning diameter over cross slide: 600 mm, turning length: 750 mm, turning diameter: 370 mm, spindle bore: 82 mm, spindle speed (max.): 4,200 rpm, travel distance X-axis: 267 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 840 mm, spindle motor power: 22,000 W, rotational speed (max.): 6,000 rpm, total height: 2,300 mm, total length: 3,000 mm, total width: 2,140 mm, turning diameter over bed slide: 370 mm, overall weight: 6,200 kg, bar diameter (max.): 82 mm, Equipment: documentation/manual, rotational speed infinitely variable, TAKISAWA TS-4000YS FANUC 32i-B JAPAN Made in Japan High rigidity (6200 kg weight, 30° inclined machine bed, slide rails) - Built-in main and sub-spindle - High rigidity and built-in main and sub-spindle enable precise and vibration-free machining - 22 kW main spindle with 618 Nm max. torque - High performance and solid machine bed enable high-volume chip removal - Y-axis Technical data: Capacity Max. swing diameter Ø 600 mm Max. turning diameter and length Ø 370 x 750 mm Trought hole: Ø 82 mm Spindle Axle height from the ground 1,140 mm Spindle bearing/bore diameter Ø 140 / Ø 90 mm Spindle head A2-8 Spindle speed 4,200 rpm C-axis resolution 0.001 ° Lhedpfx Aox Tf Rzodwob Sub spindle Axle height from the ground 1,140 mm Spindle bearing/bore diameter Ø 90 / Ø 53 mm Spindle head F-140 Spindle speed 6,000 rpm C-axis resolution 0.001 ° Strokes and rapid traverses Strokes X-axis = 267 mm Z-axis = 840 mm Y-axis = - 50 ~ +70 mm A-axis = 780 mm Rapid traverse X-axis = 30 m/min Z-axis = 30 m/min Y-axis = 10 m/min A-axis = 30 m/min Power Spindle motor (30 min. / 100 % ED) AC 22 / 15 kW Max. torque: 618 Nm (S3 25%) Driven tools Number of tool positions on the turret 15 pcs Max. tools speed 6,000 rpm Drive power (30 min. / 100 % ED) 7.5/3.7 kW Maximum torque 48 Nm Tooling Driven tool positions 15 pcs Tool cross-section 25 x 25 mm For hole machining Ø 40 mm Dimensions Height 2,300 mm Depth (without chip conveyor) 2,140 mm Width (without chip conveyor) 3,000 mm Net weight 6,200 kg Including options: FANUC Data SERVER LNS Barfeeder interface Part catcher chip conveyor Renishaw tool mesaurement (main and subspindle also) Kitagawa BB-250 3 jaws hydraulic chuck – main spindle Kitagawa SS1881K hyraulic holow cylinder – main spindle Kitagawa B-206 3 jaws hydraulic chuck – sub spindle Kitagawa SS12640K hyraulic holow cylinder – sub spindle 15 pos turret High power coolant pump (520W) Work lamp 3-3 pcs live tool (radial-axial) Live center some static tool holder NOT INCLUDING: 2 pcs SMW chuck (possible buy) transporting

Condition: excellent (used), Year of construction: 2018, operating hours: 8,305 h, functionality: fully functional, Equipment: documentation/manual, Doosan Lynx 2100 A ( 2018.07. ) Model: LYNX 2100A, equipped with Fanuc F0i control Main spindle speed: 5,000 rpm Main spindle motor power: AC 15/11 kW Chuck size on the main spindle: 8” (210 mm) Bar capacity through main spindle: ø 52 mm Max. turning diameter: ø 350 mm Max. turning length: 330 mm Rapid traverse X/Z: 30 m/min Tool profile: 25 x 25 mm (Ø32 mm) Turret positions: 12 (tool change time 0.15 sec) Basic toolholder set, programmable tailstock with live center, oil mist extractor included!! Lhsdpfx Aex Sdyxodweb CE Certification, transformer Optional Equipment:  Doosan tool load monitoring system  Program-controlled tailstock  Bar feeder interface  Workpiece catcher with collecting box  Automatic tool presetter  High-pressure coolant 7 bar (1.1 kW)  Oil separator  Chip conveyor  Electrical noise filter

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Controller: Fanuc 18i-TB Max turning diameter: 330 mm Max turning length: 510 mm Max diameter above bed: 330 mm Spindle power: 11 kW – 4000 rpm Number of turrets: 1 Number of tools: 12 Live tooling: Spindle speed range: 45–4500 rpm Y-axis travel: Typically around ±50 mm Live tool spindle power: 5.5 kW Lhsdpfxox Ryrhs Adwjb Machine weight: 4,750 kg.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, A used 5-axis lathe ROMI Type: E 320, Fanuc 18Ti, year of manufacture: 2008, with chip conveyor and accessories. You can inspect the machine under power at our facility. Max. turning diameter: 320 mm Max. machining length: 1000 mm Bar max. diameter: 76 mm Travel (X/Y/Z): 220 x 100 (+60/-40) x 1000 mm Feed rate, X-axis: 30 m/min Feed rate, Y-axis: 18 m/min Feed rate, Z-axis: 30 m/min C-axis: 0.001° Spindle power: 26 kW Rotational speed: 3000 rpm Turret: 12 positions Dimensions: 390 x 190 x 220 cm Weight: 9,500 kg CNC Fanuc Series 18Ti control Chip conveyor Live tailstock Lhodpfox Rvd Hsx Adwob Coolant system: 7.5 bar Complete documentation included

Condition: not inspected (used), Year of construction: 2003, turning length: 380 mm, turning diameter: 284 mm, spindle speed (max.): 5,000 rpm, overall weight: 2,300 kg, Siemens maximum spindle speed: 5,000 rpm Lhedpfex Rbwxsx Adwjb VDI turret with 12 stations

Condition: used, Year of construction: 2003, Turning length 1000 mm Spindle bore 65 mm Max. turning dia. 300 mm Spindle speeds 4000 rpm Spindle speeds on live tools 4000 rpm Turret w/12 stations Control: Mazatrol 640 T Nexus Equipped with: 3 pcs. live tools Various tool holders Lsdpox N A I Nsfx Adwjhb

Condition: like new (used), Year of construction: 2018, Haas ST15 Lodjx Nwqfspfx Adwehb Year of manufacture: 2018 Toolsetter, hydraulic tailstock, 210 mm chuck Excellent condition! Video available

Condition: good (used), Year of construction: 2004, spindle speed (min.): 3,500 rpm, travel distance Z-axis: 1,000 mm, Model Year: 2004 Chuck Diameter: 12" Lhodpfx Aex Nvr Uodwob Number of Axes: 3 Length: 1000 mm Swing Over Bed: 350 mm Spindle Speed (RPM): 3500 Machinable Materials: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Delrin, Peek

Condition: good (used), Year of construction: 2001, functionality: fully functional, spindle speed (min.): 3,500 rpm, travel distance Z-axis: 2,000 mm, rotational speed (min.): 4,500 rpm, feed length Z-axis: 500 mm, fuel type: electric, fuel: electricity, throat depth: 350 mm, Year of manufacture: 2001 Chuck diameter: 12" Number of axes: 2 Length: 1000 mm Neck diameter: 350 mm Spindle speed (rpm): 3500 Machinable material types: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Delrin, Peek. Ljdsx Nvqdspfx Adwjhb

Condition: good (used), Year of construction: 2007, functionality: fully functional, spindle speed (max.): 4,000 rpm, travel distance Z-axis: 500 mm, throat depth: 300 mm, Model Year: 2007 Chuck Diameter: 8" Number of Axes: 2 Length: 500 Swing Over Bed: 300 mm Spindle Speed (Rpm): 4000 Ljdox Npbispfx Adwshb Machinable Material Types: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Delrin, PEEK

Condition: used, Mazak MP620 - Multiplex S/N 88655, Mazatrol T32-6 Spindle: 2 x 5000 rpm Turret: 2 x 12 driven tools X: 440 mm Z: 475 mm Lodpox Ni Sujfx Adwehb