Metrie s.r.o.

Condition: ready for operation (used), functionality: fully functional, OPTI 599 - year 2019. The OPTI 599 is a high-performance crosscut saw which can increase your productivity by up to 30% compared to traditional ones. Designed for use in high-production lines for heavy-duty non-stop operation, it employs a hardened steel helical toothed roller drive system incorporating a powerful brushless motor that guarantees a 260 mt./1’ feed speed. Cutting takes place by means of a connecting rod movement controlled by a brushless motor with 0.15 second cutting times. The rejects are ejected at the rear at the moment of cutting and the sizes are separated at the exit on the sorting belt by means of lateral ejectors. Hsdpfsy R Tcyex Acbefg The board dimensions and the defects marked with fluorescent chalk are detected by a separate reading station. TECHNICAL DATA OPTI 599 Blade diameter mm. 450/550 Motor power kw. 5,5/7,5 Feed speed mt./1′ 260 Cutting capacity mm. 45×200 (ø450) 80×240 (ø550) Machine consists of : 1. Infeed conveyor-belt, width 250 mm. Length 3500 mm. Same motorization of the machine. Reading station for detection of total length of the board and of fluorescent chalk markings. 2. Optimizing Crosscut Saw OPTI 599 TCT tipped blade Ø 450mm. Motor 7.5kw. with safety brake. Cut controlled by brushless motor. Power 42 Nm Feeding thru dragging rolls with vertical pressing wheels. Dragging motor: Brushless 34 Nm. Max. feeding speed: 300mt./1’. 2 brushless motors: 1 in the infeed power 42 Nm 1 in the outfeed power 42 Nm Accuracy: +/-1mm. Cut capacity: max 260 x 30 min.50 x 20 mm. 3.Electronic control by means of touch-screen keyboard. Thru the keyboard, working parameters should be inserted, such as: length of pieces to be cut in mm., n° of pieces to be cut, box where to discharge such pieces, clean cut in mm., tail cut in mm., scraps to be broken into pieces, in mm., minimum rest-piece, in mm., Furthermore on the keyboard we insert (protected by password) all parameters for the good operation of the machine. Remote support thru Ethernet rj 45. Photocell to read the quality on the side. Photocell to read the width of the boards. 5 different quality 5 different widths 4.Discharging conveyor 250 x 12.000mm. with n° 8 lateral pneumatic discharging boxes. Geared-motor 0.75kw. Recovering plane for cut pieces. H of the table of recovering H 800 mm 5. Discharging conveyor 350 x 2.500mm for small scraps Geared-motor 0.37 kw. 1 flat conveyor. 1 inclined conveyor.

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 1.490,14, saw blade diameter: 500 mm, cutting height (max.): 140 mm, cutting width (max.): 350 mm, power: 8 kW (10.88 HP), overall weight: 2,000 kg, TECHNICAL DETAILS Max. saw blade length: 6,100 mm Max. saw blade diameter: 500 mm Saw blade arbor diameter: 35 mm Max. cutting height: 140 mm Max. cutting width: 350 mm Infeed table length: 7,850 mm Outfeed table length: 2,400 mm Hfodpfoy Nyd Ijx Acbog MACHINE DETAILS Main motor power: 5.5 kW Total power: 8.0 kW Voltage: 400 V Fuse: 25 A Dimensions & Weight Dimensions (L x W x H): 11,250 x 800 x 1,600 mm Weight: 2,000 kg EQUIPMENT Automatic feed system

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: B725, cutting height (max.): 150 mm, cutting width (max.): 300 mm, table length: 3,000 mm, saw blade length: 3,570 mm, Equipment: CE marking, TECHNICAL DETAILS Max. saw blade length: 3,570 mm Max. cutting width: 300 mm Max. cutting height: 150 mm Max. saw blade diameter: 500 mm Saw blade arbor diameter: 35 mm Infeed table length: 3,000 mm Outfeed table length: 3,000 mm MACHINE DETAILS Voltage: 400 V Fuse: 16 A Power: 5.5 kW Main motor power: 5.5 kW Dimensions & Weight Dimensions (L x W x H): 3,900 x 1,100 x 1,650 mm Transport weight: 700 kg Transport packages: 3 Hjdoy Nxynspfx Acbofg EQUIPMENT CE marking

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Vertical Finger Jointing Line with Surfacing Minimum section dimensions: 70 × 20 mm Maximum section dimensions: 280 × 110 mm Minimum joint length: 700 mm Length of joined boards: unlimited The line consists of: Motorized roller conveyor - 1 motor, 0.75 kW, Speed: 15/90 m/min - Dimensions: 6,000 x 300 mm Compact Vertical Automatic Finger Joint - 1 feeding unit for boards with 2 chrome-plated rollers, Ø 250 mm - 1 mobile horizontal station for joint closing - 1 clamping unit on the mobile horizontal station for incoming boards - 1 anti-splintering device on the mobile horizontal station - 4 adjustable lateral pushers for positioning boards against the main reference - 1 dual-spindle profiling unit - 1 chip extraction hood for saw heads Ø 200 mm - 1 gluing unit for polyurethane adhesives, complete with: - 2 stainless steel valves - 2 profiled combs Hedpfey I Alrex Acbofg - 1 fixed clamping unit on the main structure - 1 advancement unit for jointed boards with 2 rollers Ø 250 mm (Teflon coated) - 1 measuring unit for cross-cutting with encoder - 1 safety enclosure - 1 hydraulic power pack - 1 control panel Automatic Unloader - Dimensions: 14,000 x 1,000 mm - 1 roller track for moving the jointed lamellae - Inclined steel side frame for storage of the jointed lamellae - 1 pneumatic side pusher Complete line equipped with: - SPAPUR 300 spray gluing unit, designed for polyurethane (PU) adhesive - Machine for shear and bending strength tests KN 50

Condition: like new (used), Year of construction: 2025, functionality: fully functional, COST-CUTTING OPTIMIZING SAW The Supercut 500 is a high-speed optimizing saw designed to deliver maximum production capacity with outstanding reliability. EXTREMELY ROBUST The machine features a highly robust, reinforced steel frame. The infeed belt conveyor is synchronized and driven by the same motor as the feed rollers. An exclusive system ensures solid double-sided top and bottom traction. The upper feed system includes three hardened, toothed drive rollers and six idle pressure wheels (in three pairs). Each toothed roller's rise and descent are managed by numerical control. TECHNOLOGICALLY INNOVATIVE The electronic system integrates a computer directly connected in real time to a next-generation CNC (numerical control unit). The TROPTIM software runs on Windows and offers full management of up to five wood grades. Equipped with a 22” color LED display, remote internet teleservice, and integrated Excel macros. FAST An innovative cutting system achieves such high speed that the blade is almost invisible during operation. Rapid, comprehensive optimization with a compact overall footprint. Feed system equipped with an 18 Nm brushless servo motor. Cutting system uses a 28 Nm brushless servo motor. Saw blade power: 7.5 HP (5.5 kW). Eight idle rollers positioned under the belt of the infeed conveyor. CUTTING DIMENSIONS Cutting section: min. 30x15 mm, max. 220x60 mm. Minimum workpiece length before cutting: 500 mm, maximum: 5000 mm (up to 6000 mm with optional support rollers). Capability for a single cut in the last 190 mm of the board. Suitable for boards of regular profile with a maximum thickness variation of 8 mm. Maximum timber weight: 50 kg. Hfjdsy Iz Hnspfx Acbsg

Condition: excellent (used), Year of construction: 1994, Maximum cutting width 250 mm Length of feed table 3 m Length of discharge table 3 m Year of manufacture 1994 Hfjdpfx Ajy Ivg Ajcbeg Motor power approx. 2.2 kW Voltage 400 V Weight 600 kg Very good condition

Condition: used, Year of construction: 1996, Colour: Grey Weight: 3.500 kg - Year: 1996 - Documentation available: No - CE certificate present: No - Serial number: 10.6654 - Input table length [mm]: 8800 - Output table length [mm]: 6650 - Voltage [V]: 400 - Fuse [A]: 25 - Power [kW]: 8.0 - Transport weight [kg]: 3500kg - Transport packages [pcs.]: 6 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels Hjdpfjy Il Ucsx Acbjfg

Condition: excellent (used), functionality: fully functional, Grecon Dimter Opticut S50 Optimizer Maximum infeed material length: 5000 mm Hfedpfxey E Shkj Acbsg Minimum/maximum wood width: 20-300 mm Minimum/maximum wood thickness: 10-100 mm Possibility of bundle cutting Defect cutting in material CE Certificate DTR documentation Reference image of the machine

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 2924, STROMAB CT 600 Rotary Crosscut Saw This is a used optimizing saw in very good condition, equipped with premium accessories (e.g., outfeed conveyor with pneumatic ejectors; infeed feeding table). Power supply (V): 400 Blade diameter (mm): Ø 600 Year of manufacture: 2009 Model: CT 600 Motor power (kW): 7.5 kW Serial number: 2924 Overall assembly dimensions (mm): approx. 16,000 x 2,650 x 1,600 Total infeed table dimensions (mm): approx. 7,400 x 2,200 x 950 Infeed material table dimensions (mm): approx. 6,000 x 1,500 x 950 Outfeed table / conveyor dimensions (mm): 7,300 × 220 × 1,120 Number of pneumatic outfeed ejectors: 7 pieces Blade speed (rpm): 2,800 Table swiveling range (°): max. ±70 Cutting height at 0°: 160x310 mm, 80x390 mm Cutting height at +/-45°: 160x220 mm, 80x270 mm Cutting height at +/-70°: 160x100 mm, 80x130 mm Hjdpfx Acey D Sdcebefg Saw table rotation speed from 0° to 70°: 3 seconds Wood dust extraction ports: Ø 100 mm, Ø 120 mm Control and programming unit: ELCO ELETTRONICA Power 1000 The original manual is available in both English and Slovak (printed version). For supplementary or further information, please contact us by e-mail.

Condition: used, Optimization line Hsdpfxsy Dri Ej Acbsfg Manufacturer: Weinig Model: OptiCut 350–4 R Year: 2001 Country of manufacture: Germany ⁠Complete with loading and unloading tables

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 241306, saw blade diameter: 500 mm, cutting height (max.): 170 mm, cutting width (max.): 395 mm, power: 7.5 kW (10.20 HP), borehole diameter: 30 mm, TECHNICAL DETAILS Max. cutting width: 395 mm Max. cutting height: 170 mm Hsdpfx Aey Akvnocbjfg Saw blade diameter min.: 490 mm Saw blade diameter max.: 500 mm Saw blade bore diameter: 30 mm Feed table length: 5,640 mm Output table length: 1,180 mm Feed speed: Automatic MACHINE DETAILS Voltage: 400 V Power consumption: 16.5 A Fuse: 32 A Power: 7.5 kW Transport weight: 800 kg Transport packages: 3 EQUIPMENT Automatic feed system

Condition: good (used), Year of construction: 2000, functionality: fully functional, Sawmill Line Equipment for Sale Hfodpfx Aceyyv Udebsg We are offering for sale part of a sawmill production line (the EWD band saw has already been sold). The following equipment is available: - Complete conveyor systems - Esterer edging saw (year of manufacture: 2000) - Multi-rip saw (250 kW German motor, year of manufacture: 1992) - SDOP 600/3 drum chipper (year of manufacture: 2010) - Full conveyor system for sorting sawdust and offcuts into the chipper The line has been in operation until 02/2026 and is fully functional. ✔ Available as a complete set or as individual machines. For more information, please contact us via email or WhatsApp.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, High-performance optimizing cross-cut saw GRECON DIMTER OptiCut S75-4 with defecting mode. This machine is ideal for precise solid wood cutting, featuring automated detection and elimination of material defects. Technical specifications: Maximum infeed length : 6300 mm ( Pusher ) Minimum cutting length : 50 mm Maximum cutting width : 360 x 30 mm / 240 x 160 mm Maximum feed speed : 60 mtr/min Main engine( Saw) : 7,5 Kw Sawblade diameter : 400 mm Year of construction: 2001 Rotary current: 400 V / 50 Hz Control voltage: 230 VAC / 24 VDC Nominal output: 11 kW Fuse protection: 25 A Hjdpfxoyxwyrj Acbsfg Machine measures : Infeed : L 7600 x B 800 x H 1100 mm / Sav : L 1400 x W 1200 x H 1650 mm / Outfeed : L 5200 x W 600 x H 900 mm. Overall working hight : 850 mm Defect Detection: Automated identification and elimination of wood defects (knots, cracks, etc.). Yield Optimization: Software-driven calculation to ensure the best possible use of the raw timber. Manual in English and German / Electric diagram included. Can be examined in working condition Request WHATSAPP video

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Grecon Dimter OptiCut 304R Optimizer Minimum input wood length: 900 mm (with cross chain infeed) Wood width min./max.: 40-200 mm Wood thickness min./max.: 15-80 mm Lowering, cutting, and acceleration time: 0.5 – 1 sec Cutting accuracy: min. 0.8 mm, max. 1.5 mm Max. wood cross-sections: 200×25 mm, 170x50 mm, 80x80 mm, 140×60 mm Saw blade diameter: 400 x 30 mm Saw blade speed: 4200 rpm Max. feed speed: 170 m/min Outfeed belt conveyor with 6 pushers Cutting modes: 1. Fixed length cutting 2. Board length optimization for maximum output 3. Defect removal with chalk marking Hjdpeyxltyefx Acbofg Total line length: 21 m Year of manufacture: 2000

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, saw blade diameter: 700 mm, table width: 6,000 mm, OPTIMIZING AND DEFECTING CROSS-CUTTING LINE CURSAL MOD. TRV 2000E 700 SX Hfjdpfxsywdx Sj Acbeg Line configuration: - Motorized roller conveyor 6000 x 760 mm - Chain feeder with singulator (buffer magazine) for boards from 4500 mm up to 6000 mm, capacity 6 boards - Optimizing and defecting cross-cutting saw Cursal mod. TRV 2000 E 700 SX - Roller feed system - Blade diameter 700 mm - Max feed speed 150 m/min - Cutting section 480 x 65 mm - Cutting section 530 x 30 mm - With chalk defect marking system - Year 2015 - Outfeed conveyor belt 5000 x 600 mm - Bilateral overhead ejector - N. 2 transfer conveyors for semi-finished parts (1 right + 1 left) - N. 2 accumulation roller conveyors (1 right + 1 left)

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, saw blade diameter: 450 mm, cutting height (max.): 100 mm, cutting width (max.): 200 mm, type of input current: three-phase, year of last overhaul: 2025, For sale: Metal Technika OWD-1600 Optimizing Saw / Cross-cut Saw, year of manufacture 2018. The machine is fully operational, ready for immediate use – ideal for fast cutting of components in serial production. A major advantage of this machine is its ability to set a cutting schedule for up to 8 positions: you simply set the dimension and the quantity, and the machine automatically performs cutting and proceeds to the next positions without the need for tool changes. Technical Data: Model: Metal Technika OWD-1600 Year of manufacture: 2018 Maximum material width: 200 mm Maximum material height: 100 mm Maximum board length: 3200 mm Feed speed: approx. 30 m/min Saw blade diameter: min. 400 mm / max. 500 mm Motor speed: 2800 rpm Spindle speed: approx. 6000 rpm Power supply: 3x 400V Power: 7 kW Medium: air 6–7 bar Weight: approx. 1500 kg Performance: The machine operates efficiently – for example: - Batch of 8 boards, 12 mm thick each - Board length: 2800 mm - Cutting into 3 elements (approx. 700 mm) - Cycle time: about 10 seconds The machine can be inspected and tested on site. Hodpfjyv Ewmjx Acbsfg Location: Elbląg / Warmińsko-Mazurskie, Poland For further questions, please contact me.

Condition: used, Year of construction: 2013, Colour: Grey Weight: 2.000 kg Hodpfx Ajyvf Epecbjfg Price: On request - Details: - └ Description: Machine is currently not working, possible problem with software - Year: 2013 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 4919 - Min. saw blade diameter[mm]: 440 - Max. saw blade diameter [mm]: 450 - Input table length [mm]: 4700 - Output table length [mm]: 2000 - Options: Automatic pusher system - Feed speed: Automatic - Voltage [V]: 400 - Current consumption [A]: 13 - Fuse [A]: 20 - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Dimter / Weinig OptiCut 450 Quantum Optimizing Cross-Cut Saw Manufacturer: Dimter / Weinig Model: OptiCut 450 Quantum Year of manufacture: 2006 Machine description: For sale: Dimter / Weinig OptiCut 450 Quantum optimizing cross-cut saw, year 2006, designed for high-speed and precise cross-cutting of timber with yield optimization. The Quantum version is one of the top models in the OptiCut 450 series and was developed for industrial use with extremely high output, precise positioning and reliable material transport. The machine is suitable for fixed-length cutting, defect cutting and production optimization. The OptiCut 450 series was designed for integration with scanners, sorting systems and automatic handling equipment. Typical Quantum features include VarioSpeed infeed, HighGrip feed rollers, an independent length measuring system and a servo-controlled intelligent waste gate. Technical data: - capacity: up to approx. 540 cuts/min - feed speed: approx. 300 – 415 m/min Hjdpfx Acoyu Uriobofg - maximum workpiece length: approx. 6.3 m - saw blade diameter: 450 mm - maximum cutting width: 235 mm - maximum cutting height: 100 mm - working height: 900 mm - motor: 7.5 kW - air consumption: approx. 1200 NL/min - cutting accuracy in the OptiCut 450 series: approx.± 0.8 mm Features / advantages: - extremely high cutting performance - high positioning accuracy - VarioSpeed system reducing gaps between boards - HighGrip rollers for secure material transport - servo-controlled waste gate - suitable for integration with scanners and sorting lines - proven Weinig / Dimter technology for continuous industrial production Condition: very good Note: Technical details may vary depending on the exact machine configuration, control version, handling equipment and installed options.

Condition: good (used), Year of construction: 2004, functionality: fully functional, Dimter / Weinig OptiCut 350 Optimizing Cross-Cut Saw Manufacturer: Dimter / Weinig Hfsdpfx Aoyu Uq Escbeg Model: OptiCut 350 Year of manufacture: 2004 Machine description: For sale: Dimter / Weinig OptiCut 350 optimizing cross-cut saw, year 2004, designed for fast and precise cross-cutting of timber with optimization function. The OptiCut 350 belonged to Dimter’s high-performance series and was used for fixed length cutting, defect cutting and timber yield optimization. The machine is suitable for joinery shops, sawmills, pallet production, furniture components and general industrial timber processing. Depending on configuration, the machine may include optimization software, automatic infeed, loading stations and barcode optimization. Technical data: - Machine type: optimizing cross-cut saw - Maximum cutting height: approx. 120 mm - Maximum working cross section: approx. 235 x 12 mm or 120 x 100 mm - Minimum timber width: approx. 30 mm - Maximum feed speed: up to approx. 350 m/min - Infinitely variable feed: yes - Frequency-controlled cutting speed: yes - Saw motor power: 7.5 kW - Positioning accuracy: approx. 2 mm - Optimization program: yes Features and advantages: - High cutting performance - Automatic material positioning - Possibility of yield optimization - Proven Dimter / Weinig technology - Suitable for continuous production - Good solution for industrial timber processing Condition: good Note: Technical details may vary depending on the exact machine configuration, optional equipment, table length and control version.

Condition: excellent (used), maximum cutting width 250 mm feed table length 3 m Hjdpfxoyudbge Acbjfg outfeed table length 3 m year of manufacture 2003 motor power approx. 2.2 kW power supply 400 V weight 600 kg

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: V001175, Weinig GRECON TURBO S finger jointing line with integrated Timme stacking machine - German production Hjdpfxoyrccdj Acbefg - year of manufacture 2015 TECHNICAL PARAMETERS: Wood parameters - width 40 - 150 mm - thickness 20 - 80 mm - length 150 - 1000 mm - pressing length 3000 - 6100 mm - power consumption 145 kW - air consumption 4300 Nl/min - suction capacity 12088 m3/h - two milling stations - undercutters - package width 600 mm Folded machine dimensions - length 30000 mm - width 7000mm - height 2100 mm - required floor length: approx. 31000 mm - required width: approx. 8000 mm

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: 467334, Manufacture year 2010 Machine specifications: - Push infeed, max. length 6300 mm - Automatic length measuring and chalk reader - Cutting width 40 – 420 mm - Cutting height 15 – 170 mm - Min. cross section 20 x 10 mm - Max. cross section 270 x 170 / 410 x 30 mm - Motor 13.5 kW - Total electrical load approx. 22 kW -Operating pressure approx. 8 bar - Saw blade diameter 630 mm / bore 30 mm Hsdoypvdiepfx Acbofg Consisting of: 1. Cross chain infeed system 8 pc. chain transport with 3 latch rows 2. Push infeed system with liftable pusher Infeed length 6300 mm, length detecting and chalk reader 3. OptiCom Direct controller 4. Opticut cross cut saw unit S90 XL With side pusher and waste gate 5. Outfeed transport belt

Condition: excellent (used), Year of construction: 2019, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: 8135.44, cutting height (max.): 100 mm, cutting depth: 300 mm, Great saw always cuts to 0.5 for age hardy used Hodpfx Ajyngniscbsfg

Condition: used, Year of construction: 2012, operating hours: 926 h, total height: 1,800 mm, total length: 11,250 mm, total width: 900 mm, Colour: Grey Weight: 1.500 kg Price: On request - Year: 2012 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 546324 - Operating hours: 926 - Main motor power [kW]: 7.5 - Max. saw length [mm]: 7209 - Max. saw width [mm]: 300 Hfodpfoyna Ezex Acbjg - Max. saw blade diameter [mm]: 500 - Arbor saw blade diameter [mm]: 85 - Input table length [mm]: 7850 - Output table length [mm]: 2400 - Options: Automatic pusher system - Voltage [V]: 400 - Current consumption [A]: 22 - Fuse [A]: 25 - Power [kW]: 11.0 - Transport dimensions: 11250mm x 900mm x 1800mm (l x w x h) - Transport weight [kg]: 1500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2022, total height: 1,700 mm, total length: 10,000 mm, total width: 1,800 mm, Colour: Grey Weight: 1.100 kg Price: On request - Year: 2022 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 8737 - Max. saw length [mm]: 6000 - Max. saw width [mm]: 300 - Min. saw blade diameter[mm]: 490 - Max. saw blade diameter [mm]: 500 - Arbor saw blade diameter [mm]: 30 - Input table length [mm]: 7000 - Output table length [mm]: 2000 - Options: Automatic pusher system - Voltage [V]: 400 - Current consumption [A]: 20 - Fuse [A]: 32 - Transport dimensions: 10000mm x 1800mm x 1700mm (l x w x h) - Transport weight [kg]: 1100kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Hjdpfx Aceyna Enebsfg Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels