Condition: used, Used stainless steel twin shaft paddle mixer by Alco Food Machines (DE) model AMP 300-S with total volume of mixing chamber 330 l. Working volume of mixing chamber about 230 l. Mixing chamber has internal dimensions L 900 mm x W 805 mm x D 535 mm. Top open. Machine is equipped with two mixing shafts, each driven via gearbox and el motor 0.9/1.5 kW, 705/1415 rpm, 380/400V, 50 hz. Each shaft is equipped with two half-ribbons and seven mixing paddles. Discharge through front wall two discharge outlets, each equipped with stainless steel lid, operated pneumatically. Machine is mounted on four stainless steel legs and is equipped with local control panel. Last time used in food industry. Islhccjykpaaeqnjan

Condition: used, Used dissolver by Drais (DE) model RN 3-45 AS VAC. Contact parts designed in carbon steel. Machine is designed for work on vacuum. Mixer has single shaft with working length 105 cm and toothed disc with diameter 690 mm. Shaft is driven by el motor 45 kW, 1460 rpm, 400/690 V, 50 Hz. Working rotation of shaft up to 600 rpm. Mixer has also side wall scrapper, driven by el motor 1.5 kW, 1410 rpm, 440 V, 50 Hz and gearbox. Working rotation of scrapper up to 26 rpm. Machine has top cover and mixing pan with total volume 2000 l. Mixing pan has internal diameter 1465 mm x length of straight side of wall 1160 mm. Mixing pan has two side wall discharge outlets with valves, and bottom supports for work with forklift. Dissolver is rised/lowered hydraulically. Rise up to 145 cm. Hydraulic pack is driven by el. motor 1.5 kW, 1420 rpm, 230/400 V, 50 Hz. Mixer is equipped with vacuum pump by Tepro (PL) and local control panel. Last time used in chemical industry. Islheykn U Neccqnsan

Condition: used, Used carbon steel jacketed paddle type mixer by Kates (PL) type 2M1.6. Total volume 1700 l, working volume about 1600 l. Mixing chamber is designed for work on pressure up to 0.14 bar in working temperature range from 5 - 40 C. Mixer has mixing shaft with 6 paddles and two rods working close do front walls. Shaft is driven by el. motor 55 kW, 1483 rpm in Ex design, through gearbox with reduction i = 72.71, what gives working rotation of shaft up to 20.39 rpm. Mixing chamber is covered with carbon steel cooling jacket with volume 75 l. Working pressure on jacket up to 0.5 bar at temperature in range from 5 up to 40 C. Mixer has top inspection manway with bolted lid and diameter 500 mm. Central bottom discharge with pneumatically operated valve. Mixer is mounted on carbon steel supporting construction. Machine is able to work as Ex II3GcIIA T3 /ATEX. Mixer is equipped with stainless steel electric control panel. Technical documentation included. Specifications: Ijlhccqsykn U Asnean Bowl Volume: 448.6 gal Motor Power: 73.8 hp Material Of Construction: Carbon Steel HP Of Unit: 73.76 Revolutions Per Minute: 20.39 Vacuum Internal (Y/N): No Jacket (Y/N): Yes Jacket Pressure: 0.5 Jacket Temperature: 5-40

Condition: used, Used GEA Westfalia model HSB-300-06-777 stainless steel disc stack centrifuge. Inlet feed 1.16kg/dm3 & heavy liquid 1.30kg/dm3. Maximum rated 4,800rpm. Unit includes stainless steel collection pot, used Seepex pump, control cabinet.. Unit is driven by 75kw, 1486rpm, 400volt, 3/50 electric motor. Ijlhcceykuimjqnsan

Condition: not inspected (used), Volume: Approx. 6000 L Type: Standing on three feet Iolhccjhg Nk Doqnjan Tank diameter: 2250mm heatable/coolable double jacket Enamelled tank

Condition: not inspected (used), Volume: Approx. 6000 L Type: Standing on three feet Tank diameter: 2250mm heatable/coolable double jacket Iaolhohg Niqoccqnjn Enamelled tank

Condition: not inspected (used), Volume: Approx. 5000 L Type: Standing on three feet Tank diameter: 2100mm Islhccjhg Nlpeqnoan heatable/coolable double jacket

Condition: used, Used stainless steel two decks tumbling screen by Allgaier-Werke Gmbh & Co KG (Germany) model TSM 950/3. Body and contact parts made of stainless steel. Machine has 2 decks with diameter 950mm and has cleaning rubber balls on 2 deck. Central top inlet and 3 side outlets. Machine is driven by ele. motor with power 1.5 kW, 1430 rpm 220/380 volts, 50 Hz. Screen is mounted on carbon steel based. The set with machine includes a third deck with balls without a screen. Iajleyi Ex Nshccqnjn

Condition: used, Used Fryma Koruma model VME-120/C stainless steel vacuum process vessel. - Manufacturer: Fryma Koruma - Model: VME-120/C Vessel: - Capacity of vessel: 25 - 120 litre - Vessel rated: -1 bar at 150°C - Capacity of jacket: 25 litre - Jacket rated: 3 bar at 150°C Mixers: - scraping-mixing system: speed 17/34 rpm driven by 2.0/2.4 kW motor - homogenizer system with diameter 230 mm: speed 300 - 1450 rpm, driven by 15 kW motor Iajlhccoykpdfjqnen Includes: - vacuum pump - control panel - hydraulic agregate for lifting mixing units Specifications: Power: 19 kW Vacuum (Y/N): Y Capacity: 120 Jacket (Y/N): Y

Condition: used, Used Winkworth stainless steel ribbon blender. Approximately 550 litre working capacity (product dependent). Mixing trough measures approximately 1140 mm long x 815 mm wide x 1015 mm deep. Has stainless steel single interrupted ribbon with diameter approx 800 mm, driven by 5 HP, 1440 rpm, 380-440 V, 50 Hz electric motor through gearbox. Has stainless steel hinged lid on each side and safety mesh on one side. Includes off-centre bottom discharge. Iajlhcceykn T Ssqnsn Specifications: Capacity: 550 ft³ Dimensions: 44.8819 x 32.0866 x 39.9606

Year of construction: 2026, operating hours: 1 h, condition: new, functionality: fully functional, machine/vehicle number: Mzbp06, Equipment: CE marking, The fully automatic horizontal automatic cartoning machine is a high-tech product integrating optics, electronics, pneumatics, and mechanics. Iolhccjya Uq Neqnean It is suitable for the automatic cartoning of various products. Its workingprocess involves the conveying of items; automatic opening andconveying of cartons; automatic loading of materials into the cartons;and automatic gluing and tongue insertion, among other complex sealingprocesses. The machine's exterior is entirely constructed of high-qualitystainless steel and is innovatively designed in strict accordance with thepharmaceutical industry's "GMP" standards. The transmission system isdesigned with overload protection and an emergency stop device. Theoperating system uses a human-machine interface video screen to ensureoperator safety.

Condition: used, Used SGL Carbon Technic Sas (France) model CKL7 diam.16 - 10 blocks, graphite (DIABON NS1) heat exchanger/cooler-condenser with surface area 102,6 sq. meters. Has 10 graphite blocks, each diameter 765 mm x 347 mm height. Construction material of shell P265GH (W.Nr. 1.0425). Process side rated full vacuum/3bar at 1 to 110 deg.C. Design pressure -1/3Bar at 1 to 110 deg.c. Service side rated 5 bar design pressure at 1 to 40 deg.C. Process side capacity 542 litre and service side capacity 648 litre. Product inlet diameter: 450 mm and 100 mm outlet. Dimensions: 1000 mm diameter x 4520 mm height. Mounted on (3) lugs. New 2010. Transport dimensions: 4700 mm lenght x 1 450mm width - 1700 hight. Iaelhcsyi Ewfjcqnon Transport weight: 5 600 kg, (only exchanger 4950 kg). Weight: Actual: Kg5600.0

Condition: used, Used stainless steel contact parts horizontal hammer mill by Pallmann (Germany) type PHM 600-350. Mill has internal dimensions of milling chamber L 600 mm x W 350 mm. Top of milling chamber is manually rised. At the bottom mill has a discharge outlet through the screen. At the top of milling chamber there is installed static knife for grinding of product. Rotor has diameter 500 mm x width 345 mm. On the rotor there are 24 rows with hammers, each row consist of 4 hammers. Total number of hammers is 96. Rotor and hammers are designed in non-corrosive steel. Rotor is belt driven by el. motor 75 kW, 2975 rpm, 380/660 V, 50 hz. Mill has side feeding inlet with dimensions 350 mm x 265 mm. Product is moved into milling chamber through three screws. Screws are driven by el. motor 0.55 kW, 2800 rpm, 220/380V, 50 hz and varispeed gearbox with manual adjustment of outgoing rotation. Mill is equipped with electric cabinet, belt cover and set of screens (6 pcs). Specifications: Horsepower: 75 kW Material Of Construction: Stainless steel Ioloyhc N Aohccqnsan Number Of Hammers/Row: 96 hammers / 24 rows Type: "U" type hammers

Condition: used, Used carbon steel grinding mill by Pallmann (Germany) model PR8. Mill has bolted rotor with diameter 795 mm and stator with diameter 800 mm. Belt driven by el. motor 100 kW, 1480 rpm, 380 V, 50 hz. Manual adjustment of gap between milling plates. Mill has mounted 5 nozzles for feeding gas or liquid inside the milling chamber. Front door bolted with central feeding inlet through feeding chute. Bottom discharge. Iaelhccqeyhc Nvonsn

Year of construction: 2022, condition: ready for operation (used), functionality: fully functional, The SYSMEX CA-660 is a compact, fully automated blood coagulation analyzer utilizing proven optical detection technology. The system supports coagulation, chromogenic, and immunological (turbidimetric) assays, making it ideal for laboratories with low to medium workload volumes. The device was purchased brand new and used for only 6 months in a laboratory that ceased operations shortly after opening. The unit is fully functional, in excellent condition, and operates like new. - Fully automated hemostasis analyzer - Optical clot detection - Supports routine and specialized assays (PT, APTT, fibrinogen, D-Dimer, vWF, etc.) - High accuracy and reliable performance - Excellent data management and efficient workflow. Ielhccqoyh Awdensan

Condition: used, Used pin mill by Jehmlich (Germany) model Rekord D, designed in carbon steel. Mill body made of cast iron. Unit has milling discs with a diameter of 610 mm made of carbon steel. Mill has one fixed and one rotating milling disc driven by a belts driven with an ex proof electric motor with a power of 20 kW, 2940 rpm, 380 V, 50 Hz. Machine is equipped with a stainless steel feeding hopper and bottom unloading. Under the mill outlet is installed a screw conveyor constructed as follows: stainless steel chamber and a galvanized carbon steel screw driven by a gearbox and electric motor with power of 0,75 kW, 3-phase, 50 Hz with an operating speed of 125 rpm. Whole thing is mounted on a frame made of carbon steel. Specifications: Horsepower: 20 kW Material Of Construction: Cast iron and carbon steel Type Of Mill: Pin mill Iaolhccqjygvpajnen

Condition: used, Used vertical stainless steel (AISI 304) mixing tank by ZUGIL (Poland) with a working volume 10000 l. Inside dimensions: diameter 2600 mm x length of straight side of wall 2100 mm. Tank has top mounted 2 level paddle type agitator, driven by reducer and el. motor with power 2.2 kW, 380 volt 3/50 Hz. Working rotation of agitator up to 20 rpm. Agitator is supported at bottom. Mixing chamber is equipped with 4 baffles welded to the wall. Top flat, with bolted stainless steel cover, equipped with hinged inspection manway. Bottom, elipsoidal, welded, with central discharge outlet. Tank is mounted on (3) stainless steel legs. Last time used in chemical production. Specifications: Capacity: 10,000 L Diameter: 2,600 mm Isljygvlbehccqnoan Height: 2,100 mm Type of stainless: AISI 304 Type Of Heads: Top flat, bottom elipsoidal Vertical/Horizontal: Vertical Legs/Lugs/Skirt: 3 legs

Condition: used, Used vertical stainless steel (AISI 304) mixing tank by ZUGIL (Poland) with a working volume 12500 l. Inside dimensions: diameter 2600 mm x length of straight side of wall 2550 mm. Tank has top mounted 2 level paddle type agitator, driven by reducer and el. motor with power 4 kW, 380 volt 3/50 Hz. Working rotation of agitator up to 18 rpm. Agitator is supported at bottom. Mixing chamber is equipped with 4 baffles welded to the wall. Top flat, with bolted stainless steel cover, equipped with hinged inspection manway. Bottom, elipsoidal, welded, with central discharge outlet. Tank is mounted on (3) legs carbon steel legs. Last time used in chemical production. Specifications: Capacity: 12,500 L Diameter: 2,600 mm Height: 2,550 mm Type of stainless: AISI 304 Type Of Heads: Top flat, bottom elipsoidal Ijlhccqjygvk Djnoan Vertical/Horizontal: Vertical Legs/Lugs/Skirt: 3 legs

Condition: used, Used vertical stainless steel AISI 316L aseptic pressure storage tank with a total capacity of 830 l by Schwarte-Milfor Sp. z o. o. (Poland) type Mieszalnik procesowy. Tank has a working volume of 700 l and is designed to operate at pressures ranging from -1 to 4 bar and temperatures up to 150 C. The heating and cooling jacket made of stainless steel AISI 304 has a capacity of 152 l and is designed to operate at pressures ranging from -1 to 3 bar and temperature up to 150 C. The jacket is insulated with mineral wool and clad with AISI 304 stainless steel sheet. Internal dimensions: diameter 850 mm, length of straight wall line 1,200 mm. The tank has a welded dished top equipped with an inspection manway with an internal diameter of 450 mm and 9 stub pipes with mounted accessories. The tank has a welded dished bottom head equipped with a central outlet with a NovAseptic valve type NA and 2 stub pipes with mounted accessories. The machine is mounted on 3 legs equipped with tensions cells with a display. The equipment includes full technical documentation of the manufacturer and UDT in polish. Iaslhjygvkwjccqnon Specifications: Capacity: 207.5 gal Diameter: 850 mm Height: 1,200 mm Type of stainless: Stainless Steel AISI 316L and AISI 304 for The Jacket Type Of Heads: Dished Vertical/Horizontal: Vertical Legs/Lugs/Skirt: 3 legs equipped with tensions cells

Condition: ready for operation (used), Fully Equipped Water-Based Paint Factory Sale or lease of the entire site or individual plant components - Over 50 mixing and stirring tanks (stainless steel) - 5 horizontal ball mills (including Netzsch ZWM 88) for fine dispersion - Extensive dispersing, dissolver, and transfer systems - Tank farm with tanker and container unloading Ielhsyknlujccqnsan - Filling lines for small and large containers - High-bay warehouse with approx. 2,300 pallet spaces - Container cleaning system - Laboratory, workshop, office, and social areas - Complete utilities, cooling, ventilation, and safety technology (EX design) The existing infrastructure allows for flexible utilization – from immediate production start-up and capacity expansion to project-based or temporary usage concepts. This makes the site attractive for both strategic buyers and lessees/tenants. Further details, technical specifications, and layout plans available on request.

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, Single-Punch Tablet Press Model CPR1 The CPR 1 benchtop press is a single-punch machine designed for tablet production. Powder is loaded into a hopper and directed through a stainless steel tube into the die cavity. Islhccoykukqoqnsan The adjustable punch compresses the powder, and the finished tablet is ejected from the machine. The press operates with a continuous motion utilizing cam disks. An operator panel equipped with a tablet counter is included. The machine is capable of producing up to 3,000 tablets per hour. The tablet press can be fitted with tooling for round, oblong, or oval tablets. Punch and die changes can be carried out simply and quickly. All product-contact parts are made of AISI 316 stainless steel. Technical Data Machine dimensions CPR1: 350 x 500 x 720 mm Net weight CPR1: 80 kg Electrical connection: 1 Ph. 230 V. 50 Hz Electrical power: 1.20 kW Tablet output: max. 3,000 tabs/h Tablet size range: 4–20 mm

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, Automatic Capsule Loader Mod. MS1 and Capsule Filling Machine Mod. MS6 AUT Ielhjykt Rpoccqnjan Automatic filling machine Mod. MS 6 AUT for hard gelatin capsules with 300 capsule holders for production. With the automatic loader MS 1, up to 16,000 capsules per hour can be produced. The machine is equipped with a capsule format that allows selection between sizes 00 – 0 – 1 – 2 – 3 – 4. On request, capsule sizes 000, 5, and DB Caps. can also be supplied. Technical Data Machine dimensions MS6 AUT: 500 x 400 x 700 mm Machine dimensions MS1: 410 x 700 x 650 mm Net machine weight MS6 AUT: 55 kg Net machine weight MS1: 115 kg Electrical connection: 1 Ph. 230 V. 50 Hz.

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, MC100 – Capsule Loader / Filler Semi-automatic filling machine model MC 100 for hard gelatin capsules with 100 holes, enabling the production of up to 3,200 capsules per hour. The machine consists of a loader and a filler, both mounted on a separate base. The machine is supplied complete, including a powder pressing device and an electromagnetic vibrator to ensure uniform distribution of powder into the capsules. The machine is equipped with one capsule format, selectable between sizes 00 – 0 – 1 – 2 – 3 – 4. On request, capsule sizes 000, 5 and DB Caps can also be supplied. Ielhccqsyktzuonjan Technical data: Single base Machine dimensions: 650 x 380 x 410 mm Net weight: 30 kg Electrical connection: 1 Ph. 230 V, 50 Hz.

Year of construction: 2022, operating hours: 25 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 22/B-001-0194, Push-off device for Euro pallets Example: Iaeloykr Akshccqnen Transferring materials from wooden pallets to cleanroom pallets

Year of construction: 2022, condition: ready for operation (used), functionality: fully functional, For sale: Siemens ADVIA Centaur CP immunology analyzer, used only 6–7 months. The device is in excellent technical and visual condition, fully functional, with no defects. The analyzer is suitable for medical and clinical laboratories seeking high-precision and reliable immunological diagnostics. Key features: Manufacturer: Siemens Model: ADVIA Centaur CP Type: Immunology analyzer Iaolhccqsyhfl Hsnsn Condition: Used – like new (6–7 months in operation) Application: High-accuracy immunology testing Operation: Automated analysis delivering fast and reliable results Advantages: - High sensitivity and precision - Suitable for medium and large laboratories - Proven, well-established technology - Stable performance under heavy workload Reason for sale: The device was purchased for a laboratory that ceased operations about 6 months after acquisition; therefore, the analyzer is no longer in use and is offered for sale. Additional information: Upon serious inquiry, the following can be provided: - Additional photos - Technical documentation - Serial information