Optimization cross cut line

GreCon Dimter Opticut 704

Condition: like new (used), Year of construction: 2016, power: 200 kW (271.92 HP), overall weight: 7,500 kg, MEBOR multi-blade line with two drums, model VC700, manufactured in 2016. In very good working condition! Almost new. Bedpey Sganjfx Agksdi The multi-blade line includes: 1. Automatic feed conveyor with automatic positioning rollers. 2. Loading ramp. 3. Unloading table with left/right sorting.

Condition: excellent (used), TECNI-ARMENTIA CH-70 edger - hydraulic control - the possibility of programming the width - saving up to 12 programs - centering table TECHNICAL PARAMETERS: cutting width max. 700 mm cutting height max. 130 mm main engine power 55 kW material width max. 830 mm length of the fixed sleeve 300 mm length of the movable sleeve 100 mm min. material length 700 mm spindle diameter 65 mm sleeve diameter 85 mm disc diameter 350 - 400 mm hydraulically smoothly adjustable feed feed speed up to 38 m / min feeding table 2700 mm roll width 700 mm roll diameter 140 mm centering feeding table two lasers pump motor power 4 kW row of anti-recoil pawls three upper pulling rollers three lower pull rollers hydraulic pressure Bdodpeidmptsfx Agksi hydraulic height adjustment dimensions (length / width / height) 480/200/230 cm weight 4000 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, machine/vehicle number: 34435, stroke length: 200 mm, throat depth: 405 mm, operating speed: 21 mm/s, reverse speed: 180 mm/s, table height: 970 mm, oil tank capacity: 350 l, overall weight: 11,500 kg, total length: 4,945 mm, total width: 2,000 mm, total height: 2,995 mm, power: 37 kW (50.31 HP), input voltage: 400 V, input current: 63 A, input frequency: 50 Hz, pressing force: 170 t, clearance between the columns: 2,600 mm, distance table to ram: 400 mm, ram plate length: 3,050 mm, table length: 3,050 mm, table width: 120 mm, Equipment: CE marking, documentation/manual, safety light barrier, Hydraulic press brake LVD EASYFORM 170/30 Touch-B Year of manufacture: 2012 Serial number: 34435 Technical specifications Force: 1700 kN Working length: 3000 mm Distance between uprights: 2600 mm Stroke: 200 mm Distance table – ram: 400 mm Gap: 405 mm Turbo: PP5400 Approach speed: 128 mm/s Working speed: 22 mm/s Return speed: 200 mm/s Weight: 11500 kg Motor: 37 kW Oil: 350 L Weight: 11500 kg LxWxH: 4945 x 22000 x 2995 mm COMMAND CONTROL TOUCH-B – • Table PP8170 V-axis • EFL 90 • Top tool clamping PP3090 – Wila • Hydraulic top tool clamping PP3100 • PP3160 hydraulic clamping V-dies • Back gauge X R Z1 Z2 X’ • Safety: CE PP3580 – lasersafe Bdedpfx Agozk H A Dskji • 2 supports, front

Condition: used, Year of construction: 2004, MAZAK VTC 200B II, year 2004 X axis: 1120 mm Y axis: 510 mm Z axis: 510 mm Spindle: max. 12,000 rpm SK40 Through-spindle coolant (IKZ) Table length: 1460 mm Bedpfx Asylnxkegkedi Table width: 510 mm Table load: 800 kg Tool changer: 30 positions Spindle power: 18.5 kW Spindle speed: 12,000 rpm Tool changer: 30 positions IKZ: Yes Number of controlled axes: 3 Chip conveyor: Yes Cooling system: Yes

Condition: like new (used), Year of construction: 2018, Set for robotic plasma welding .( Robot not included - without robot ) Shipping to EU countries is our responsibility and the shipping cost is free. Bdodpfx Aorfuc Hsgkji

Condition: good (used), functionality: fully functional, Year of construction: 2005, operating hours: 18,000 h, SAMPO-ROSENLEW 1066 — forest harvester Year 2005 · 18,000 hours · 4-wheel drive Bdjdepugxnjpfx Agksi EQUIPMENT • KETO 150 SUPREME harvester head • AGCO Sisu 6-cylinder engine • EPEC 4W30 control system, IQAN display • Measuring equipment • Air conditioning • Vacuum pump • Feed rollers • Wheel chains included • Built in Finland RECENT MAINTENANCE • New injection pump • Reconditioned distributors • Reconditioned working pump (100 h) Machine in good working order, ready to work. Available for inspection and testing on site in Teiu, Hunedoara county, Romania. Price EUR 19,000 ex works Teiu, excluding VAT. Intra-EU supply at 0 % with reverse charge for VAT-registered buyers in the EU.

Condition: ready for operation (used), Year of construction: 2005, 1 used CNC lathe with driven tools and Y-axis. Control system: Siemens. Bodpfezgtgbjx Agkjdi The machine can be inspected while powered on, by prior arrangement.

Condition: used, Year of construction: 1999, functionality: fully functional, Schmidler S4 Joinery Line - 4-strand transverse infeed conveyor (inclined upwards) - Infeed roller conveyor - Edge turning device integrated in the infeed roller conveyor - Zero point detection - Electronically controlled under-table swing cross-cut saw Saw blade diameter: 710 mm Swivel angle: 360 degrees Tilt angle: 0–65 degrees - Waste wood pusher - Marking pen, horizontal (from below) and vertical (from behind) - Universal milling unit incl. finger-joint cutter and dovetail milling head - Horizontal drilling unit – rafter nail drilling device - Vertical drilling unit - Vertical profiling mill (lower position) for internal radii - Powered outfeed roller conveyor - Pneumatic push-off ruler - Transport and measuring system - Control system incl. color display Maximum workpiece dimensions: Height: 300 mm Width: 400 mm Length: approx. 12,000 mm 4-Side Planer – Schmidler Minimum workpiece dimensions: Height: 30 mm Width: 50 mm Feed speed: 9/18 m Planer shaft diameter = 140 mm 4-sided chamfering unit Bdedpfx Ajya Dc Ijgkji Infeed roller conveyor Outfeed roller conveyor with push-off ruler and storage rods Machine in good used condition, fully operational and in use. The machine can be inspected by appointment. Available for sale immediately or by arrangement.

Condition: used, Year of construction: 2004, functionality: fully functional, travel distance X-axis: 780 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, rapid traverse X-axis: 50,000 m/min, rapid traverse Y-axis: 50,000 m/min, rapid traverse Z-axis: 50,000 m/min, controller manufacturer: HEIDENHAIN, controller model: iTNC-530, number of slots in tool magazine: 60, tool length: 315 mm, tool diameter: 160 mm, Equipment: chip conveyor, Deckel Maho DMC-60T – 5-Axis Vertical Machining Center The Deckel Maho DMC-60T is a high-precision 5-axis vertical machining center, year of manufacture 2004, equipped with Heidenhain iTNC-530 CNC control. The machine is ideal for complex and high-speed machining thanks to its ISO 40 taper spindle, maximum speed of 18,000 rpm, and motor power of 19/28 kW (continuous/30 min). Main features: Axis travels: X = 780 mm, Y = 560 mm, Z = 560 mm Rotary axes: A = ±150° (head), B = 360° (table), continuous rotation with minimum resolution of 0.001° Table: 630 x 500 mm, maximum load 500 kg Rapid traverse: up to 50,000 mm/min Bdodpowt N Tyjfx Agkoi Tool magazine: 60 stations, SK40 DIN-69871 tools, max Ø 80/160 mm, max length 315 mm, max weight 8 kg Additional equipment: Workpiece probing system, chip conveyor, coolant tank with pumps, high-pressure pump through spindle, spindle chiller, transformer, manuals, and CE documentation. Machine dimensions and weight: L 5,100 mm × W 5,000 mm × H 2,500 mm – Weight: 11,000 kg

Condition: excellent (used), Year of construction: 2014, operating hours: 2,308 h, functionality: fully functional, table width: 500 mm, table length: 630 mm, spindle speed (max.): 12,000 rpm, spindle motor power: 22,400 W, number of spindles: 1, number of slots in tool magazine: 41, Equipment: chip conveyor, documentation/manual, CNC Milling Machine HAAS UMC-750 TECHNICAL SPECIFICATIONS: • Date of manufacture: October 2013 • Power-on hours: 2 308 h • Number of axes: 5 (simultaneous machining) • X-axis travel: 762 mm • Y-axis travel: 508 mm • Z-axis travel: 508 mm • B-axis travel: +110° to -35° • C-axis rotation: 360° • CNC control: HAAS • Max. spindle speed: 12 000 obr/min • Table dimensions: 630 × 500 mm Bodpfx Agoz S H D Njkedi • Distance from spindle nose to table surface: 102–610 mm • Tool magazine capacity: 40 + 1 tools • Max. power: 22,4kW • Chip conveyor • Machine weight: approx. 9 000 kg Machine in very good technical condition, connected to power – it can be inspected and tested on site by prior appointment. Professional loading is included in the price. Accessories, tooling and clamping devices shown in the photos are part of the offer only if listed under equipment. Technical data is for reference only and may contain inaccuracies. Subject to prior sale. Vertikales Bearbeitungszentrum