D'Cunha Industriemaschinen GmbH

Condition: ready for operation (used), Year of construction: 2013, operating hours: 15,000 h, Main Drive Spindle speed range 12000 Tool taper Capto C6 Number of axis 5 Movement Y-Axis Movement 230 mm A-Axis Movement 1550 mm Workpiece Workpiece drm over bed 1000 mm Fjlhcdwox E Eamo Esgk This 5-axis DOOSAN Puma MX2600ST turn-mill centre was manufactured in 2013. It features a maximum turning diameter of Ø 760 mm, part length up to 1540 mm, and bar capacity of Ø 76 mm. Equipped with a Fanuc 31i-A control, dual spindles with speeds up to 4000 rpm, and a milling spindle at 12,000 rpm. Includes a tool magazine with 80 positions and a swarf conveyor. Consider the opportunity to buy this DOOSAN Puma MX2600ST turn-mill centre. Contact us for more information. Application Types Turning

Condition: like new (used), Year of construction: 2022, operating hours: 800 h, functionality: fully functional, turning length: 610 mm, turning diameter over cross slide: 500 mm, turning diameter: 725 mm, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 260 mm, feed length Y-axis: 80 mm, feed length Z-axis: 610 mm, torque: 250 Nm, bar passage: 65 mm, Equipment: documentation/manual, rotational speed infinitely variable, For sale: As-new EMCO MAXXTURN 65-G2 SMY (Year 2022) featuring Siemens Sinumerik ONE with ShopTurn control! CNC turning center for complete machining of turned/milled parts. Equipped with integrated spindle motors, water-cooled counter-spindle (preloaded roller guides), and Y-axis for both main and sub-spindle operations. Latest control technology: SINUMERIK ONE with ShopTurn conversational programming. Main spindle: - Max. bar capacity: 65 mm - Max. torque: 250 Nm - Speed range: 0-5,000 rpm Counter-spindle: - Power output: 22 kW - Max. torque: 130 Nm - Speed range: 0-7,000 rpm Tool turret: - 12-station VDI 30 radial turret with directional logic for up to 12 driven tool holders - Max. drive power: 6.7 kW - Max. torque: 25 Nm - Max. speed: 5,000 rpm Y-axis: - Travel: +/- 40 mm Fjlhcdwex E Dncs Eegk Additional features: - Hollow clamping cylinder incl. drawtube - C-axis for main/counter spindle - Sinumerik ONE / OPERATE control - 22" multi-touch display - SHOPTURN - 3D simulation - Residual material detection - USB interface - Electrical cabinet air conditioning - Coolant system incl. coolant pump (3.5 bar) - Chuck flushing (additional pump 3.5 bar) - Parts ejector and flushing via the counter spindle - Hydraulic unit - Interface for chip conveyor - Full documentation and CE certificate Control languages: German/English Electronic handwheel EMCO TOOL BREAKAGE AND WEAR MONITORING/SINUMERIK ONE Alternating spindle speed Counter spindle as tailstock: This cycle allows the use of the sub-spindle with a live center for supporting workpieces, enabling shaft machining even on machines without a tailstock. Maximum contact force limited to 50% of axis force. EMCO PROFI-NET ROBOT INTERFACE Interface for adding robots (HARTING connector; signal exchange via Profinet; safety signals 2-channel/potential-free). Digitization package for Sinumerik: - Condition monitoring - SIEMENS ONE INTERFACE for connecting to MDE/BDE systems Included standard information: • Machine ON/AUX ON • Automatic mode • Production mode – program active • Program running and override between 95–105% • Piece count pulse (M30) • Programmable pulse (M300) 3D MACHINE DATA / MT65-G2 - 3D data model of the machine - Pneumatically operated finished part catcher for gentle unloading; finished parts can be transported to a collection box (standard) or conveyor belt (option) - Max. finished part length: 175 mm - Max. finished part diameter: 65 mm - Max. finished part weight: 4.5 kg INTERFACE SL1200 HT65-DT/TT + MT65-1000 - For connecting the EMCO SL1200 short bar feeder. ...and more. The machine is immediately available!

Condition: good (used), Year of construction: 1998, functionality: fully functional, turning length: 400 mm, turning diameter: 60 mm, spindle speed (max.): 6,000 rpm, overall weight: 4,800 kg, Equipment: documentation/manual, rotational speed infinitely variable, Main spindle Ø 60 mm Felex Ez Ndshcdw Eegk Counter spindle Ø 42 mm 2 turrets with 14 stations each Milling spindle on upper turret LNS Hydrobar – bar feeder

Condition: ready for operation (used), Year of construction: 2011, operating hours: 52,298 h, functionality: fully functional, machine/vehicle number: 22/620, spindle speed (max.): 5,000 rpm, travel distance X-axis: 207 mm, bar passage: 65 mm, workpiece diameter (max.): 344 mm, Equipment: bar feeder, Submitting a bid obligates you to collect the item by 31/01/2026 at the latest! TECHNICAL DETAILS Maximum swing diameter: 370 mm Maximum machining diameter: 344 mm Maximum bar capacity: 65 mm Axis travel X1 Axis travel: 207 mm X2 Axis travel: 141 mm Y1 Axis travel: 100 mm Y2 Axis travel: 70 mm Z1 Axis travel: 760 mm Z2 Axis travel: 815 mm Main spindle Speed range: 5,000 rpm Main drive power (40% ED / 100%): 22 / 15 kW Spindle bore: 76 mm C-axis resolution: 0.0001 degree Sub spindle Speed range: 5,000 rpm Drive power (25% ED): 22 / 15 kW C-axis resolution: 0.0001 degree Turret Number of stations: 2 x 12 Tool shank height: 25 mm Boring bar holder diameter: 40 mm Driven tools Speed: 6,000 rpm Drive power: 5.5 kW MACHINE DETAILS Dimensions & Weight Fgjlhjx Ezvkjcdw Ejk Dimensions (L x W x H): 3510 x 2810 x 2480 mm Machine weight: 12,500 kg Operating hours Total operating hours: 69,718 h Automatic cutting hours: 52,298 h Pure cutting Rev. 1: 26,775 h Pure cutting Rev. 2: 15,905 h FEATURES Bar feeder interface LNS Sprint 565 bar feeder Additional coolant nozzles on main and sub spindles Signal lamp (yellow) Hainbuch Spanntop Nova Axfix SK 65 (main spindle) Kitagawa B-208 (sub spindle) Workpiece unloading device with conveyor belt C-axis sub spindle: 0.0001 degree High-pressure coolant: 70 bar Mayfran Consep 2000 II chip conveyor, ejection to the right

Condition: good (used), CNC lathe with short bar loader and NC tailstock! Available immediately! Year of manufacture 2011 – first commissioning 2015; Low operating hours, Fanuc control with Manual Guide i; 250 mm chuck, 65 mm spindle bore, turning length approx. 750 mm; Box guideways in X and Z; Chip conveyor; Tool setter; LNS short bar loader; Parts catcher with belt; Various tool holders, fixed and driven; Fully equipped for turning; Folhcdsx Ey Skew Eegk

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Max Workpiece (Ø x Length): 170 x 330 mm. Bar Capacity: Ø 65 mm. Travels: X: 211 mm | Z: 400 mm | Y: ± 50 mm | A (Sub-spindle): 506 mm. Main and sub-Spindle Speed: 4,500 rpm Folhcdsx Eywgjw Eogk Turret: 12 positions (5.000 rpm max.). Bar loader.

Condition: used, Year of construction: 1998, turning length 4.500 mm greates pass round over bed 810 - 760 mm swing diameter over slide rest 740 mm control SIEMENS - 840 C max. turning diameter 800 mm turning diameter over slide 740 mm travel -x2 axis 875 mm travel -z2 axis 5.200 mm CNC Turning- and Milling Center | NILES-SIMMONS - N40 MCT 4500 equipped with a turret for driven tools as well as NC steady rest and tailstock. Additional equipment: - Centering points, - Jaw sets, - Clamping jaws, The machine is in a well-maintained condition. Folhex Emviscdw Eegk Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: N-40 | N 40 | N40MCT4500 | N40MCT

Condition: used, Year of construction: 2012, swing diameter 560 mm turning length 800 mm Fgolhcdwjx Emp Ns Esk control C200-4D Siemens 840 D spindle head 8 DIN 55026/55021 ISO 7027/1 bar capacity 90 mm spindle diameter in front bearing 140 mm turning speed range - spindle ~ 3.500 U/min drive capacity - spindle motor 100% / 40%: 43 / 57 kW Torque 275 / 363 Nm Indexing 2,5 ° C-Axis 0,001 ° Number of Turrets 1 number of toolpositions 12 pos. Spindle speed - driven tool stations ~ 6.000 min -1 power capacity - driven tool-stations 11 kW tool taper 40 x 63 mm DIN 69880 Torque 21,5 Nm travel -x axis 300 mm travel -z axis 800 mm rapid traverse X/Z: 30 / 22,5 m/min feed power X: 7.200 N feed power Z: 9.000 N dia. of quill 65 mm Cone SK 30 longitudinal travel 800 mm rapid traverse 10 m/min total power requirement 51 kVA weight of the machine ca. ca. 14 t dimensions of the machine ca. 7,3 x 4,0 x 2,6 m CNC Turning- and Milling Center INDEX - G 250

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, turning length: 570 mm, turning diameter over cross slide: 300 mm, bar diameter (max.): 65 mm, For sale: GILDEMEISTER CTX 400 V5 CNC LATHE with live tools, 2 x C-axis and sub-spindle. Type: CNC Lathe Fjlhsx Elq Socdw Eogk Manufacturer: GILDEMEISTER Model: CTX 400 V5 Control: HEIDENHAIN Country of manufacture: Germany Year of manufacture: 1997 - Machine equipped with 5 live tools - Turret: 12 positions with VDI 30 tool holders (live stations) - Max spindle speed: 5,000 rpm - Max turning length in Z-axis: 570 mm - Max turning diameter in X-axis: 300 mm - 2 x C-axis - Live tooling - Sub-spindle - Max bar diameter: 65 mm - Parts catcher Machine is fully operational, possibility for test run available.

Condition: excellent (used), Year of construction: 2013, swing over cross-slide 360mm, Maximum cutting diameter 366mm, Maximum cutting length 705mm, Folhcdex Eituow Eegk Bar capacity 80mm, Spindle speed 4,000rpm, milling speed 10,000rpm, Main spindle power 18.5Kw, C axis 0.001 degrees, Y axis -/+ 50mm, 12 station turret. Mori Control M730BM, equipped with Toolsetter, swarf conveyor, 3 jaw chuck, Parts catcher, barfeed unit

Condition: used, Year of construction: 2017, operating hours: 2,612 h, functionality: fully functional, GENERAL SPECIFICATION PUMA GT 2100M 1.1. CAPACITY : - Swing over bed (interference with front cover) / : 600 mm - Swing over saddle: 390 mm - Recomended turning diameter : 210 mm - Max. turning diameter : 300 mm - Max. work length : 513 mm - Bar working diameter : 65 mm - Max. permissible mass (including chuck) : o Chuck work : 150 kg o Shaft work : 300 kg - Base structure o Bed slant angle:30 deg. o Guideway type: Box guide 1.2. MAIN SPINDLE : - Drive mechanism : Belt-drive - Chuck size : 210 mm - Motor power (15 min / cont.) : 18,5 / 15 Kw - Spindle speed : 4.500 rpm 1.3. CARRIAGE : - Travel : o X axis : 230 mm o Z axis : 580 mm o C axis : 360 grade (in 0.001) - Rapid traverse rate : o X axis : 24 m/min o Z axis : 30 m/min o C axis : 200 rot/min - Continuous thrust force : o X axis : 6207 N o Z axis : 11305 N - Intermittent thrust force : o X axis : 9931 N o Z axis : 16958 N - Ballscrew (diameter x lead) : o X axis : 32 x 10 mm o Z axis : 32 x 10 mm - Servo motor: o X axis : 1,8 kW Fgslex Ecwaohcdw Ejk o Z axis : 3,0 kW 1.4. ACCURACY : - Positioning : o X axis : 0,01 mm o Z axis : 0,02 mm o C axis : 0,0167 degrees

Condition: good (used), Year of construction: 2008, functionality: fully functional, Technical details turning diameter 800 mm turning length 1500 mm control Siemens 840 D swing over bed 1000 mm swing diameter over slide rest 800 mm max. workpiece weight between centres 2000 kg main spindle speeds: 2000 U/min main drive 62 kW transmission ratio 4 milling spindle drive 37 kW milling spindle turning speed range: 25 - 10000 U/min total power requirement 82 kVA weight of the machine ca. 28 t dimensions of the machine ca. 8,2 x 5,3 x 3,6 m Additional information UniCen Series – for large complex components With the Monforts machine tools from the UniCen Series 1000 you can work with large, complex components up to 1500 mm diameter and 1000 mm swing diameter entirely, process capably and cost effectively in one set-up. Great flexibility results from the five interpolating axis. The B axis swivelling drill-mill head with a swivel range of 190 deg. directs the tools to the workpiece in almost every position and every angle. Additionally, the tool head can be loaded fully automatically by 60 tools from a separate chain magazine. Thus, even complex freeform surfaces with high surface finish quality are possible. Advantages > Wear free Monforts Hydrostatic > Optimal vibration damping > Long-term accuracy > Long life and highest machining Fgslhjx D U Hwscdw Eok performance > Complex five axis machining via the B axis swivelling drill-mill head > Turning, drilling, milling and thread-cutting on one machine > Precision ball-screw with preloaded double nut Extensive partial overhaul since November 2023: - All ball screws including bearings overhauled: X1/X2/Y1/Z1/Z2 - All cylinders overhauled - All Siemens motors overhauled: main spindle, tailstock, magazine, tool 1+2, X/Z/Y/B/C/U/W - Siemens control panel replaced, control module and LT module repaired - Clamping elements/ATC renewed: Ortlieb collet, clamping package incl. pull rod - Tailstock quill renewed - All wipers replaced and covers reworked - Drive belts and safety windows renewed - Various cables renewed * CNC Control SIEMENS 840 D * Swivelling milling head at the top (B axis), interpolating, HSK-A 63 * Y axis * C axis * 8-station turret at the bottom, for driven tools * 60-station tool changer * NC-controlled tailstock, quill diameter 150 mm, max. quill stroke 180 mm * Hydrostatic longitudinal guide in the Z-axis * Coolant system with paper belt filter * Chip conveyor * Oil-cooler, make SCHIMPKE * Extraction system * Power chuck, make FORKARDT, diameter 500 mm

Condition: used, Siemens 828D control 8 “ Maximum turning diameter: 481 mm Fgjlhox D Uxtjcdw Ejk Maximum turning length: 545 mm Maximum main spindle speed: 4500 rpm Main spindle motor power: 25 kW Number of tool positions: 12 pcs X-axis travel: 260 mm Z-axis travel: 590 mm Machine length: 3415 mm Machine width: 1900 mm Machine height: 1845 mm Machine weight: 6500 kg Team Eye (possibly camera or inspection module) LNS chip conveyor Tool holder package

Condition: ready for operation (used), Year of construction: 2022, operating hours: 8,574 h, General Data Machine weight 9200 kg Control Unit Brand SIEMENS Main Drive Spindle speed range 5000 Number of axis 5 Movement X-Axis Movement 750 mm Y-Axis Movement 200 mm Z-Axis Movement 1100 mm Workpiece Workpiece drm 400 mm This 5-axis DMG MORI CLX 450 TC was manufactured in 2022, featuring a max. X-axis stroke of 750 mm, Y-axis stroke of 200 mm, and Z-axis stroke of 1,100 mm. It handles a max. workpiece diameter of 400 mm and length of 1,100 mm, with a bar capacity of 65 mm. Spindle speeds reach up to 5000 rpm. Weighs 9200 kg. If you are looking to get high quality turning capabilities consider the DMG MORI CLX 450 TC machine we have for tact us for more information. Application Types Fslhcdwjx D Izbs Ejgk Turning

Condition: ready for operation (used), Year of construction: 2002, Control Unit Brand MAZATROL Model PC-FUSION-CNC 640MT Fgjlhcdwsx D Ip Ej Ejk Main Drive Number of axis 5 Tools Number of index 40 Type of tool holder Capto C6 This 5-axis MAZAK Integrex 300-II Y was manufactured in 2002. If you are looking to get high-quality turning capabilities, consider the MAZAK Integrex 300-II Y machine we have for sale. Contact us for further details regarding this machine. Application Types Turning

Condition: ready for operation (used), Year of construction: 2004, operating hours: 18,504 h, General Data Machine weight 20000 kg Control Unit Brand SIEMENS Model Sinumerik 840D Powerline Main Drive Spindle speed range 4000 Number of axis 7 Movement X-Axis Movement 550 mm Y-Axis Movement 110 mm Turret Number of turrets 1 Tools Number of index 60 Number of station 12 Max tool length 350 mm Type of tool holder HSK-A63 Additional Equipment Oil mist extraction Coolant tank with belt filter system Internal coolant system with 80 bar pressure Approx. 30 tool holders This 7-axis DMG Gildemeister GMX 400 linear was manufactured in 2004, featuring a maximum turning diameter of 640 mm and a turning length of 1,585 mm. It includes a Sinumerik 840D Powerline control, a milling spindle with a max speed of 12,000 rpm, and a tool magazine with up to 120 positions. If you are looking to get high-quality turn-mill capabilities, consider the DMG Gildemeister GMX 400 linear machine we have for sale. Contact us for more information. Application Types Turning Fjlhcdjx D S Dgjw Ejgk

Condition: ready for operation (used), Year of construction: 2023, operating hours: 300 h, Main Drive Number of axis 5 Media Chip conveyor Yes Additional Equipment 36 tool change Includes tailstock function Fgolhcdex D S Npsw Eok This 5-axis Mazak INTEGREX j-200S was manufactured in 2023. Ideal for complex machining tasks, it offers precision and versatility in a compact design. Consider the opportunity to buy this Mazak INTEGREX j-200S. Contact us for more information. Application Types Other Machine Tools

Condition: ready for operation (used), Year of construction: 2010, General Data Measurements width 2700 mm Measurements depth 5700 mm Measurements height 2100 mm Machine weight 7950 kg Control Unit Brand SIEMENS Model SINUMERIK 840D solution line with ERGOline control and ShopTurn, operating system Windows Main Drive Spindle speed range 5000 Spindle bore 87 mm Number of axis 5 Movement X-Axis Rapid Traverse 30 m/min Y-Axis Rapid Traverse 30 m/min Z-Axis Rapid Traverse 30 m/min Tail Stock Pinol tool taper MT 5 Tools Max weight 7 kg Fslhcdwjx D S S De Ejgk Max tool diameter 80 This 5-axis DMG CTX Beta 1250 TC turn-mill centre was manufactured in 2010. It features a swing diameter of 500 mm, max turning diameter of 390 mm, and a turning length of 1250 mm. The spindle supports up to 5000 RPM and 34 kW power, complemented by a 24-position tool magazine. Ideal for complex machining tasks, consider the opportunity to buy this DMG CTX Beta 1250 TC turn-mill centre. Contact us for more information about this machine. Application Types Turning

Condition: ready for operation (used), Year of construction: 2003, Control Unit Interface HSK 63 Brand OKUMA Model OSP-100L Main Drive Felex D Ipxohcdw Eogk Number of axis 5 Tools Number of index 40 Max tool length 1500 mm Additional Equipment Autodoor This 5-axis Okuma MacTurn 350 was manufactured in 2003. It features an HSK 63 tooling system and can accommodate up to 40 tools. The machine includes an autodoor and supports a turning length of 1500 mm. Consider the opportunity to buy this Okuma MacTurn 350 Turn-mill centre machine. Contact us for more information. Application Types Turning

Condition: ready for operation (used), Year of construction: 2013, General Data Measurements width 2050 mm Measurements depth 4261 mm Measurements height 2597 mm Machine weight 8000 kg Main Drive Number of spindles 2 Spindle speed range 4500 rpm / 5000 rpm Number of axis 4 Movement X-Axis Movement 203.2 mm Z-Axis Movement 560 mm W-Axis Movement 640 mm Workpiece Workpiece drm over bed 508 mm Workpiece drm over support 508 mm Workpiece drm 336 mm Fgelhcjx D Igqsdw Eek Table Distance between 724.5 mm This 4-axis Hurco TMX 8MYS lathe was manufactured in 2013. It features a maximum turning diameter of 336mm and a swing over bed of 508mm. The distance between centers is 724.5mm, and it includes live tools with 12 positions in the turret. Ideal for precision machining, the Hurco TMX 8MYS machine we have for sale offers robust performance and versatility. Contact us for further details regarding this lathe. Application Types Turning

Condition: ready for operation (used), Year of construction: 2002, Movement X-Axis Movement XA: 475 mm, XB: 160 mm Y-Axis Movement 160 mm Z-Axis Movement ZA: 1170 mm, ZB: 1155 mm Felox D Hqhohcdw Esgk B-Axis Movement Indexing angle: 1 degree C-Axis Movement 360 Workpiece Workpiece drm 550 mm Workpiece X 1025 mm This 5-axis Okuma Macturn 250W lathe was manufactured in 2002. It features a swing over saddle of ø550 mm, a maximum machining diameter of ø550 mm, and a maximum work length of 1025 mm. The machine includes a 360-degree C-axis and a B-axis indexing angle of 1 degree. A great opportunity to buy this Okuma Macturn 250W lathe. Reach out for further details regarding this lathe. Application Types Turning

Condition: ready for operation (used), Year of construction: 2015, Control Unit Brand MAZATROL Model Matrix 2 Movement Felhcsx D Hw Uodw Eegk Z-Axis Movement 1585 mm Y-Axis Movement 260 mm This 5-axis Mazak Integrex i-400 ST was manufactured in 2015. A robust turn-mill centre, it features a main spindle power of 30 kW and sub spindle power of 26 kW, with bar capacities of 102 mm and 80 mm respectively. It includes a high-pressure system at 70 bar, Matrix 2 CNC control, and additional equipment like an automatic door and robot interface. If you are looking to get high-quality turning and milling capabilities, consider the Mazak Integrex i-400 ST machine we have for sale. Contact us for more information. Application Types Turning

Condition: ready for operation (used), Year of construction: 2008, operating hours: 12,125 h, Control Unit Brand SIEMENS Model SINUMERIK 840D Controller Brand SINUMERIK 840D Main Drive Spindle speed range 0-5000 rpm Spindle motor power 29 kW Number of axis 6 Additional Equipment Tool turret: 12-position tool VDI 30 radial with directional logic for up to 12 driven tool stations B-PowerMill: Motorised milling spindle with 24-position tool magazine, 210° swivelling range Optional tool package: Includes stationary and driven tool holders, collet chuck holders, reducing sleeves, and operating spanners Fgslhcdwjx D Hwns Esk Hollow clamping cylinder with draw tube / Part ejector and flushing through the counter spindle / Part pick-up device for finished parts Part pick-up device for finished parts / Coolant device in the chip conveyor / High-pressure pump (14 bar) and fine filter Flushing pumps (3.7 bar) / Control cabinet air conditioning unit / Electrostatic oil mist separator Hydraulic unit / Machine light / Interface for foot switch / Signal lamp Documentation including handwheel, PC keyboard, network preparation, tool monitoring, turning window, cleaning gun Clamping device for main spindle: Hainbuch BZI 80 centre pull / This 6-axis EMCO Hyperturn 665MC Plus turn-mill centre was manufactured in 2008. It features a multi-axis CNC system with Y-axis and B-axis for complete machining of turned and milled parts. Equipped with integrated spindle motors on both main and counter spindles, it offers a spindle speed up to 5000 min-1 for the main and 7000 min-1 for the counter spindle. Includes a 24-position tool magazine and SINUMERIK 840D control. If you are looking to get high quality turning and milling capabilities consider the EMCO Hyperturn 665MC Plus machine we have for sale. Contact us for more information about this machine. Application Types Turning

Condition: ready for operation (used), Year of construction: 2008, operating hours: 12,517 h, General Data Measurements width 2000 mm Measurements depth 3100 mm Measurements height 2120 mm Machine weight 6200 kg Main Drive Number of spindles 2 Spindle speed range 4000 Spindle bore 91 mm Number of axis 5 Movement X-Axis Movement 260 mm X-Axis Rapid Traverse 30000 mm/min Y-Axis Movement 100 mm (±50) Y-Axis Rapid Traverse 10000 mm/min Z-Axis Movement 795 mm Z-Axis Rapid Traverse 30000 mm/min B-Axis Movement 734 mm B-Axis Rapid Traverse 30000 mm/min Workpiece Workpiece drm over bed 923.8 mm Workpiece drm over support 755 mm Tools Number of station 12 Media Fgslhcdwjx D Hrfj Ejk Ar supply 5 bar / 100 L/min This 5-axis DMG Mori Seiki NL2500SY/700 was manufactured in 2008, featuring a swing diameter over bed of 923.8 mm and a maximum turning diameter of 366 mm. It offers a rapid traverse rate of 30,000 mm/min for X/Z/B axes and a main spindle speed up to 4,000 min⁻¹. Ideal for complex turning tasks, consider the opportunity to buy this DMG Mori Seiki NL2500SY/700 turn-mill center. Contact us for more information about this machine. Application Types Turning

Condition: ready for operation (used), Year of construction: 2006, operating hours: 20,695 h, Control Unit Brand MAZATROL Model Matrix Movement X-Axis Movement 630 Y-Axis Movement 230 Z-Axis Movement 1585 W-Axis Movement 1546 Additional Equipment Options Screen: Picture available This 5-axis Mazak Integrex 400 IV was manufactured in 2006. It features a Mazatrol Matrix control, a 12-inch chuck, and a steady rest supporting 70-230mm. The machine offers a milling spindle speed of 12000rpm and a turning spindle speed of 2800rpm. If you are looking to get high-quality turn-mill capabilities, consider the Mazak Integrex 400 IV machine we have for sale. Contact us for more information about this machine. Application Types Turning Folhcox D Szrsdw Eogk