regulation of span between drills
manual regulation of start position
6 spindles
table dimensions 1800x600mm
B8rxn00ssl
support regulation up/down
three motors 2,2kW
with interchangeable drilling bar 26 mm grid
Iw7jrlc8k
second hand
Made by Scheer
Type DB 20
Machine no. 400772
hydraulic feed brake
Number of spindles 21 + 27
Number of drilling beams 2
Drill from above
Grid 21 x 32 mm + 27 x 26 mm
Mechanical tensioner 2 pieces
Stop ruler 2000 mm
Pneumatic locking pins
Space requirement approx. 1500 mm x 1000 mm x 1600 mm
Storage location 97447 Gerolzhofen, free on truck, unpacked
Handover in the current condition as viewed,
without overhaul,
without guarante...
Used machine
Ehgj9av
Year of manufacture: 1922
hole line boring head 9 spindles from above
spindle distance 32 mm
Horizontal boring head 5 spindles
spindle distance 32 mm
Availability: short term
Location: Solingen
Hole boring machine for wood make CASATI MACCHINE type HF/Super
Technical data:
Drill head vertical / drill beam with 13 drills.
Drilling direction from above
drilling depth 60 mm
Stroke vertical 150 mm
Drill beam can be swivelled forwards by 90
Hole grid distance center-center hole 32 mm
Motor power drill motor vertical 2 HP
Drill head horizontal with 3 drills
Stroke horizontal 130 mm
Drilling direction from back to front, fixed
Hole grid 32 mm
Work table size 2000 x 450 mm
Drilling table adjus...
The machine is technically in order.
The stop system is included as well as 5 mm drill for the shelf supports
7yc33s0
Visually, the machine is absolutely not beautiful.
The Ganner was years next to the door to the paint room and has got quite a bit of paint.
The machine has certainly stood around unused for years.
CATALOG NUMBER 6548
TECHNICAL DATA
- number of spindles 8 pcs
- max tool diameter 13mm
- minimum spacing of extreme spindles mm
- any spindle spacing: front / back, left / right
- table surface size 600x1500mm
- height to the table surface 910mm
- working stroke of the table 100mm
- pneumatic and manual up / down table adjustment
- main engine 2 × 2.2kW
- dimensions length / width / height 1680x1170x1650mm
- weight 452 kg
ADVANTAGES
- Polish production
- the ability to work on the left and rig...
Pitch 32 mm
Motor output 1,5 kW
Clamping height max. 100 mm
Number of spindles 19 St.
Schleicher Unidrill 19
-----
for carcass, frame, fittings and hole line drilling
Technical specifications
B9i8y98k
-----
Working width: 630 mm
Maximum portal passage: 690 mm
Clamping height: 100 mm
Adjustment range of the boron unit: 75 mm
Drilling stroke: 120 mm
Motor: 1.5 kW, 380 V, 50 Hz
Gear: 19 spindles, division 32 mm (10 clockwise and 9 counterclockwise)
Spindle distance: min. 32 mm / max. 576 mm
Spi...
BLUM MINIPRESS Hinge Drilling Machine
Model M51N1000
Number of drill bits 5
Mounting of drills with quick couplings
Motor power 0,75 kw
Two pneumatic clamps
Zi99vlnr
Pneumatic stroke
Maximum thickness of machined material 40mm
Table under the machine free of charge
Year 1994
FELDER FD 969 Digit
Year 2012
Total power: 4,6 kW
drilling heads: 2 x vertical + 1 x horizontal
Qwrhucst
spindles per drilling head: 23 pcs.
Distance between each spindle: 32 mm
The two vertical drilling heads can each be rotated by 90°. (see last picture - possible application examples)
max. clamping height: 62 mm
max. workpiece size: 3.000 x 920 x 80 mm
distance between the 1st and the last spindle: 704 mm
min. distance between drilling heads: 150 mm
max. distance between drilling heads: 920 m...
2 drilling beams with 21 spindles each with pitch 32 mm,
Position adjustment drilling unit 0 - 650 mm,
Drill hole rows min. 190 mm spacing,
spindle speed 2.800 rpm.,
shank diameter of drills D = 10 mm with clamping surface,
clamping height of workpieces max. 70 mm,
2 motors with 1,5 kW each, 400 V, 50 Hz.,
B9u27o2itq
working height approx. 850 mm,
compressed air connection 6 bar,
1 fence ruler right with base cabinet,
1 stop ruler left
Space requirement without fence approx. 850 x 1.100 mm,
!!!D...
Throughfeed drilling machine RILESA ST
Year of production 1997
The machine drills in the X axis from the top
The machine has a magazine
Simple reliable design of spindles on straps
It has 48 independently adjustable spindles
B82r8mg7nw
driven by 8 engines, 1.1 kW each
Workpiece length 250 - 2500 mm
Workpiece width 20 - 250 mm
Drilling depth 10 - 85 mm
6 heads
regulation of span between spindles
table lifted pneumatically
pedal control
motors 2x2,2kW
spring pressure of material
table dimensions 870x670mm
B8ryf9j0i3
Drilling machine Weeke
type PE 77
machine-no. 1439
year of construction 1978
working length max. 2600 mm
working width max. approx. 570 mm
4 drilling beams from down
2 drilling beams from the side (1 right/1 left)
length of each drilling beam is 570 mm
with 18 drills in 32 mm distance
with middle support bars
with safety-switch-off-rope
each drilling beam single controllable
machine size approx.
L 3800 mm x W 1500 mm x H 1600 mm
B9ljdv3qcb
Hole line drilling machine MAW BM 500 with 32 mm pitch for drilling single holes or hole lines with pneumatic stroke.
- Pitch: 32 mm
- stroke max. approx. 80 mm
B37m0i22xj
- motor: 1,6 kW
- 7 spindles
- Incl. many drills.
number of drilling beams 1
number of spindles 19 pieces
Depxn8okg
spindle distance/grid 32 mm
Drilling from below
swivelling manual
hydraulic feed brake
working width approx. 700 mm
drilling depth 95 (110) mm
drill holder D 10 mm
pendulum stops
work piece clamp 3 x
total connected load 1,5 kW
space requirement approx. 1200 mm x 1000 mm x 1200 mm
weight approx. 300 kg
Advise used machines:
• Technical data without obligation, mistake and intermediate sale reserve.
• Price is considered ex-lo...
1 piece drilling beam 21 drills, grid system 32 mm32 mm
Gwahso
max. travel of the drilling beam min. 22 mm to max. 624 mm
Row spacing min. 125 mm , max. 603 mm ( drilling line )
Engine4.4 kW
Drill stroke 98 mm
Oil brake cylinder with stroke 70 mm
Operating pressure approx. 6.0 bar
Air consumption approx. 3 l/cycle
Traverse path from min. 20 mm to max. 650 mm
Weight approx. 540 kg
Dimensions : 2500 x 1100 x 1700 mm
The machine is still being reconditioned and checked for function
condition very g...
Hole line boring machine Bohrmatic
Year of manufacture 1976
2 x 21 spindles + 21 spindles horizontal
3 mm and 5 mm drills
cup band drill 35 mm
16 mm fitting drill
Bzzwdqkyfb
380 volt
Double sided line boring machine
2 drilling motors à 1,8 kW with oil brake cylinder
stroke max. 130 mm
with pneumatic reversing valve
21 spindles, spindle pitch 32 mm
Bkqr7wwo7b
drilling distance max. 640 mm (by shifting the workpiece max.
workpiece max. 2656 mm)
portal passage 850 mm
Air consumption at 5 atü approx. 11 litres per cycle
Suction nozzle 160 mm
machine dimensions approx. 3100 x 1100 x 1800 mm
Weight: approx. 350 kg
21-shafts, Division 32 mm
Chuck M 10 thread
Spindle distance of to 640 mm
Portal passage of 1056 mm,
Stroke length of 2500 mm with 4 pivoting attacks
Drilling unit with motor 2,2 kW
Drill head swivel, bottom boring
Height of 80 mm
3xxo0pu9t
Drilling depth of 80 mm
Row hole and dowel hole drilling machine
Combi RB 110
Year of manufacture: 1984
working width: 850 mm
number of spindles: 21 pcs.
Pneumatic clamp 4 pcs.
Bviknrg3as
1x drilling from below swivelling pneumatic working width 800 mm
1x drilling front side
Clamping depth 80 mm
Drill holder D 10 mm
Raster 32 mm hole line drilling device
Total connected load: 1,5 kW
space requirement: L 1.200 x W 900 x H 1.200 mm
Weight approx.: 400 kg
Double line and fitting drilling machine in SYSTEM 32.
Grt8ihp
Line boring machine with 2 drilling units each with 25 precision drilling spindles.
Short introduction:
• Row of holes as well as line drilling in the SYSTEM 32 mm
• 50 (2 x 25) holes in one drilling cycle
• Drilling depth correction for different drilling depths
• Massive precision drilling unit from GANNOMAT
• Furniture connector and hinge drilling (option)
• Optional 3rd drilling unit
NC controlled line drilling machine for high capacity production
with 1 or 2 drilling untis each with 76 drilling spindles.
Short introduction:
• Row of holes as well as line drilling in the SYSTEM 32 mm
• 76 or 152 (2 x 76) holes in one drilling cycle
Bcpilwigrz
• Drilling depth correction for different drilling depths
• Massive precision drilling unit from GANNOMAT
• Line drilling machine for high capacity
Second-hand machineYear of construction: 1993Condition: well-maintainedDesign:fully automatic pneumatic control with foot valve clamping-drilling-unclamping, electric intermittent operation. 2 drilling units adjustable with 2 drilling beams 15-spindles; pitch 32 mmquick change chuck for drills as standard1 program gauge for position adjustment of the drilling units with 3 crosscut stops1 basic ruler 800mm1 extension ruler 1500mm5 drop-in stops 1 adjusting gauge for hole lineAvailability: short t...
The Machineseeker Trust Seal enables buyers to quickly recognize whether they are dealing with a trustworthy seller.
What do we verify?
Check of trade licence or commercial register extract
Verification of the dealer's postal address
Validation of the banking details
Verification of accessibility to main phone number
Credit report may not contain negative criteria
Buyer complaints can lead to withdrawal of the seal
What does this mean for the seller?
After successful verification, we will include the seal awarded to you in your listings on Machineseeker. In this way, you signal to any potential buyer the independently verified seriousness of your company. This creates buyer confidence and increases the likelihood of successfully selling machines. In addition, you have the option of including the Maschinensucher seal of confidence on your homepage and letterhead.