AS Maschinenhandel

Condition: used, Year of construction: 2008, Functionality: fully functional, machine/vehicle number: X2S190, SPECIFICATION Distance between centres 1250mm Floor to spindle centres 1086MM Swing over bed (saddle wings) 400mm Swing over cross slide 246mm Swing in gap 858mm Gap width from faceplate 165mm Spindle bore 55mm Spindle nose Camlock D1-6 Taper in nose bush No. 4 MT Spindle speeds: Low range 1-297rpm Medium range 1-861rpm High range 1-2700rpm Tailstock quill travel 140mm Tailstock diameter 73mm Tailstock taper No. 5 MT MACHINE EQUIPPED WITH Ijljwcz Tqshccqqetf Fanuc 21iTB CNC Control Operation modes: manual, sequential, AlphaLink and ISO 3 jaw chuck Parat toolpost Lighting Coolant system Enclosed guarding Manual

Condition: used, Year of construction: 1999, STANKO Samat 400M lathe, No. 9990, built in 1999, center distance approx. 700 mm Itelhccqewczdieqsf

Condition: used, Functionality: fully functional, machine/vehicle number: 6/0008/08085, MACHINE SPECIFICATION Cont’d Diametral threads (21) 8 - 44 DP Metric pitches (39) 0.2 – 14mm Module pitches (18) 0.3 – 3.5 mod Sliding feeds, per rev. of spindle 0.0015 – 0.040” Surfacing feeds, per rev. of spindle 0.00075 – 0.020” Machine in Metric execution Islhcowczcfocqqjtf MACHINE EQUIPPED WITH Sino 2 axis DRO system 3 Jaw chuck Quick change toolpost Chuck guard Coolant System Lighting Rear splashguard

Condition: used, Year of construction: 2007, Functionality: fully functional, machine/vehicle number: 304372, MACHINE SPECIFICATION Centres Height 167mm Admits between 635mm Swing Over bed 330mm Over cross slide 210mm In gap diameter 480mm Length 115mm Spindle Bored to pass 38mm diameter Nose No. 4 D1 Camlock Speeds Number 16 Range 40 to 2500rpm Motor 1500rpm at 50Hz 2.2kW Cross Slide Width 140mm Travel 190mm Itjlhccowcy S Esqqof MACHINE SPECIFICATION Cont’d Top Slide Width 82mm Travel 92mm Tailstock Quill – diameter 42mm – travel 110mm – morse taper No. 3 Set over +/-12mm Approx weight 635kg Machine in Metric execution MACHINE EQUIPPED WITH Acu-Rite 2 axis Digital Readout System 3 & 4 Jaw chucks Quick change toolpost and 2-off toolholders Lighting Chuck guard Coolant system Rear splashguard

Condition: used, Year of construction: 2008, Functionality: fully functional, machine/vehicle number: 304387, MACHINE SPECIFICATION Centres Height 167mm Admits between 635mm Swing Over bed 330mm Over cross slide 210mm In gap diameter 480mm Length 115mm Spindle Bored to pass 38mm diameter Nose No. 4 D1 Camlock Speeds Number 16 Range 40 to 2500rpm Motor 1500rpm at 50Hz 2.2kW Cross Slide Width 140mm Travel 190mm MACHINE SPECIFICATION Cont’d Top Slide Width 82mm Travel 92mm Tailstock Quill – diameter 42mm – travel 110mm – morse taper No. 3 Set over +/-12mm Approx weight 635kg Machine in Metric execution Itelhccjwcyy Neqqsf MACHINE EQUIPPED WITH Acu-Rite 2 axis Digital Readout System 3 & 4 Jaw chucks Quick change toolpost and 3-off toolholders Lighting Chuck guard Coolant system Rear splashguard

Condition: used, Year of construction: 2007, Functionality: fully functional, machine/vehicle number: 304373, MACHINE SPECIFICATION Centres Height 167mm Admits between 635mm Swing Over bed 330mm Over cross slide 210mm In gap diameter 480mm Length 115mm Spindle Bored to pass 38mm diameter Nose No. 4 D1 Camlock Speeds Number 16 Range 40 to 2500rpm Motor 1500rpm at 50Hz 2.2kW Cross Slide Width 140mm Travel 190mm MACHINE SPECIFICATION Cont’d Top Slide Width 82mm Travel 92mm Tailstock Quill – diameter 42mm – travel 110mm – morse taper No. 3 Set over +/-12mm Approx weight 635kg Machine in Metric execution MACHINE EQUIPPED WITH Acu-Rite 2 axis Digital Readout System 3 & 4 Jaw chucks Quick change toolpost and 2-off toolholders Lighting Chuck guard Islhccjwcyumoqqjtf Coolant system Rear splashguard

Condition: good (used), Lathe, flange lathe, heavy lathe, lathe, lathe, flange and fitting surface lathe, slewing ring lathe, flange lathe, mobile lathe, transportable lathe -Manufacturer: Matra, lathe for facing flanges and mating surfaces (slewing ring) -Type: D 57.4 -Turning diameter: 400 - 1600 mm -Travel: X 180 mm / Z 60 mm -Drive motor: 1.1 kW -Accessories: nsport and assembly frame, individual components see photos Itolowcku Rehccqqef -Dimensions: 2450/2010/H1010 mm -Weight: 930 kg

Condition: excellent (used), Year of construction: 2021, Functionality: fully functional, machine/vehicle number: 6414.21, turning diameter over cross slide: 420 mm, spindle bore: 64 mm, turning diameter: 420 mm, turning diameter over bed slide: 340 mm, turning diameter over top slide: 210 mm, center height: 210 mm, center width: 1,000 mm, turning length: 1,000 mm, quill stroke: 140 mm, quill diameter: 60 mm, total length: 2,150 mm, total width: 1,150 mm, total height: 1,700 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 1 rpm, rotational speed (max.): 4,000 rpm, rotational speed (min.): 1 rpm, Equipment: rotational speed infinitely variable, The machine is faultless and has had no previous repairs, with very low operating hours. The lathe can be operated both conventionally and via servo drives. The control system allows programming via DIN commands, making it ideal for small batches and training. Sale due to misjudgment of the required technology: we have a growing need for a CAD/CAM-programmable cycle lathe. Please refer to the photos/description for the type, model, year of manufacture, and operating hours. Price: €50,000 (negotiable) based on a new price of approximately €76,000. Transport of the machine is not included in the price and is subject to negotiation. The center shown in most photos is not included in the offer; it is listed in the accessories list! Islhjwcdhdeccqqetf Extensive accessories are listed in the Word document. The machine is available for immediate sale.

Condition: used, Year of construction: 2016, CNC Lathe PINACHO type ST 285 Numerical Command: FAGOR CNC 8050 TC Between points: 2000 mm Maxi Ø on bench: Ø 570 mm Maxi Ø over saddle: Ø 350 mm Spindle diameter: Ø 80 mm 3-jaws chuck Ø 250 mm Year of construction: 2016 Tailstock CM5 Itslhewcb Nloccqqof Manual Turret Multifix Supplied with 2 steadies: one 3-points steady Ø 300 mm + one 3-points steady Ø 140 mm Voltage: 380 V Dimensions (L x W x H): 4200 x 1800 x 2100 mm Weight: approx 5 T

Condition: used, Year of construction: 1986, turning diameter over bed 330 mm turning diameter over slide rest 210 mm turning length 635 mm turning speeds 58 - 2500 U/min centre height 165 mm spindle bore 38 mm total power requirement 2,5 KW weight of the machine ca. 0,65 t dimensions of the machine ca. 1,6 x 0,9 x 1,65 m Center Lathe - Digital Display - 200mm 3-Jaw Chuck - Quick-Change Tool Post including 12 Tool Post Holders - Chuck Guard - Chip Tray - Live Center Islhccqewb Hz Djqetf - Coolant System - Foot Brake - Emergency Stop Device - Machine Feet

Condition: good (used), Year of construction: 2011, Center high 230 mm Between centers 1500 mm Ijlhccqjwb Dm Djqstf Swing dia over bed 465 mm Swing dia over cross slide 270 mm Swing dia in bridge 690 mm Length of bridge 240 mm Spindle hole 58 mm Spindle face CAMLOCK D1-6 Spindle taper MT 6 Speed range 25 – 2000 rpm (12 ranges) Tailstock taper MT 4 Pinole travel 128 mm Spindle power 5,5 kW Weight 1720 kgs Dimensions LxWxH = 2700 x 1080 x 1370 mm Accessories - SINO 3 axis D.R.O. - 3 jaws chuck D250 mm - Tailstock - Coolant unit - 4-fold toolholder

Condition: good (used), Year of construction: 2007, machine/vehicle number: G 907112, Offer 25088 Technical Specifications: - Maximum turning diameter - over bed 460 mm - Over cross slide 258 mm Iolhcowbp Duocqqotf - Over bridge 785 mm - Center distance 1000 mm - Cross slide travel 290 mm - Spindle mount D 1 - 8 - Spindle bore 58 mm - Tailstock quill taper MK 5 - Tailstock quill travel 180 mm - Spindle speeds 20 - 2000 rpm - Rapid traverse X / Y - With: - 2-axis digital display - Multi-fix tool post with 5 inserts - 3-jaw chuck - Manual tailstock - Coolant system - Drive 400 V / 5.5 kW - Space requirement approx. W 1900 x H 1750 x D 1050 mm - Weight approx. 1900 kg

Condition: used, Used LZS lathe, Meuser Type M0L Ielhswbf H Eoccqqotf Center height 205 mm Center width 800 mm Turning diameter in bed bridge 600 mm Accessories: 3-jaw chuck 250 mm, faceplate 400 mm, tool holder with 4 inserts

Condition: good (used), Lathe, flange lathe, heavy lathe, lathe, lathe, flange and fitting surface lathe, slewing ring lathe, flange lathe, mobile lathe, transportable lathe -Manufacturer: Matra, lathe for facing flanges and mating surfaces (slewing ring) -Type: D 56.4 -Turning diameter: up to approx. 900 mm -Travel: X 110 mm / Z mm -Drive motor: 0.55 kW -Dimensions: 1660/1700/H470 mm Itjlowbd Ibshccqqef -Weight: 224 kg

Condition: good (used), Lathe, flange lathe, heavy lathe, lathe, lathe, flange and fitting surface lathe, slewing ring lathe, flange lathe, mobile lathe, transportable lathe -Manufacturer: Matra, lathe for facing flanges and mating surfaces (slewing ring) -Type: D 57.3 -Turning diameter: 400 - 1600 mm -Travel: X 180 mm / Z 60 mm Itelhjwbdrtsccqqjf -Drive motor: 1.1 kW -Accessories: nsport and assembly frame, individual components see photos -Dimensions: 1930/1280/H1000 mm -Weight: 730 kg

Condition: used, Technical details: turning diameter over bed: 540 mm turning diameter over support: 280 mm centre height: 265 mm spindle bore of work spindle: 65 mm range of revolution per miute: 9...18000 / 24 step U/min total power requirement: 1,5 kW weight of the machine ca.: 3,6 t Ielhswa I Shsccqqjtf

Condition: refurbished (used), Year of construction: 2015, Functionality: fully functional, 2-Axis CNC Lathe Meuser D1400/7000 Year 1968 / 2015 Fagor 8055 control Swing diameter over the bed: 1780 mm Swing diameter over the cross slides : 1400 mm Turning length: max. 7000 mm Spindle bore: 120 mm Chuck diameter: 1400 mm Chuck type: 4-jaw faceplate Iolhcjwa Dn Eocqqetf Equipped with: Fagor 8055 CNC cotrol (Retrofit) 1400 mm faceplate diameter. Original technical documentation. Set of tool holders. 4 steady rests. Condition: Under power for inspection. Proposal Number L-4908

Condition: like new (used), Year of construction: 2023, Functionality: fully functional, machine/vehicle number: VT 3299, MACHINE SPECIFICATION Height of centres 195mm Swing over bed 400mm Swing over cross slide 246mm Swing in gap 585mm Width in front of faceplate 165mm Bed length between centres 1250mm Spindle speeds (infinitely variable) 0-2500rpm Spindle nose mounting (Camlock) D1-6 Spindle bore 54mm Spindle motor 7.5kW Width over bedways 318mm Travel of cross slide 250mm Travel of top slide 130mm Travel of tailstock barrel 178mm Taper in tailstock barrel No. 5 MT Approx. Weight 1800kg Machine in Metric execution   Itelhcswaz Hfscqqef MACHINE EQUIPPED WITH Acu-Rite 2 Axis Digital Readout System 3 Jaw chuck Quick change toolpost and 5 off toolholders Lighting Coolant System Chuck Guard Rear Splashguard

Condition: as good as new (ex-display), Year of construction: 2025, DREHMA Center Lathe - D410x1500mm - Demo machine - Year 2025 - CE marking - Digital display - Turning diameter over bed: 410mm - Turning length: 1500mm Itjlhcjwatv Sjcqqef - Turning diameter over support: 255mm - Turning diameter at the offset: 580mm - Spindle bore: 52mm - Speed range: 45-1800 rpm - Automatic longitudinal / cross feeds - Threads / inch / metric, etc. - Tailstock Mk4 - Central lubrication - Drive power: 3.5 kW - Fixed / follower rest - Multi-fix holder with 4 inserts - Three-jaw chuck, 200mm - Four-jaw chuck 250mm -Faceplate -Chuck guard -Front work guard -Coolant system -Work light -Live center -Machine feet Dimensions: LxWxH 2.5x1x1.6 meters / Weight 1800 kg Errors and input errors excepted

Condition: used, turning length: 750 mm, Conventional lathe ZMM C5 with Itelhcjwalu Tscqqef DUPLOMATIC TA-80 Copying attachment

Condition: new, Year of construction: 2025, turning diameter over cross slide: 270 mm, spindle bore: 58 mm, turning diameter: 460 mm, center height: 230 mm, center width: 1,060 mm, quill stroke: 130 mm, quill diameter: 60 mm, total length: 2,280 mm, total width: 1,150 mm, total height: 1,650 mm, Turning diameter in gap: 690 mm, rotational speed (max.): 2,000 rpm, rotational speed (min.): 25 rpm, overall weight: 1,910 kg, quill mount: MK 4, metric thread pitch (max.): 14 mm, tailstock quill diameter: 60 mm, Optimum TH 4610D center lathe with DPA 31 Plus digital position indicator and quick-change tool post Hardened and ground Z-axis guideway Guaranteed spindle nose concentricity ≤ 0.015 mm Shafts, gears, and main spindle run in an oil bath Lead screw cover Precisely machined slide All guideways adjustable via V-ledges Mechanical longitudinal feed shutoff of the bed slide with four adjustable eccentrics Itolhccswaaf Hsqqsf Right/left rotation on the bed slide can be switched via a switch spindle Central lubrication in the bed slide Top slide adjustment range ± 90° Smooth-running, hardened, and ground gears mounted on two adjustable precision tapered roller bearings Switch with life cycle calculation, tested according to EN ISO 13849 Large chip guard with integrated LED Machine lamp Handwheels with adjustable fine scales of 0.04 / 0.02 mm Safety handwheels with disengagement function according to EN23125 on the X and Z axes Quick-action feed gears in a closed design, gears and shafts hardened and ground, running in an oil bath on precision bearings Adjustable thread dial scale Tailstock for taper turning adjustable ± 10 mm Tailstock sleeve and handwheel with adjustable fine scale of 0.025 mm Quick, easy, and tool-free adjustment of the tailstock using a clamping lever Cable routing via energy chain Heavily ribbed prismatic bed, induction-hardened and precision-ground from gray cast iron Coolant system with separate coolant tank with level indicator and oil separator; Easy and complete emptying and cleaning according to DIN standards Emergency stop device with foot operation Scope of delivery: Fixed steady rest, opening Ø 25 - Ø 178 mm Revolving steady rest, opening Ø 19 - Ø 114 mm LED machine light Adapter MK6-MK4 Non-revolving center MK4 Non-revolving, but temperature-resistant center MK4 Quick-change tool holder SWH 5-B Tool holder 25 x 120 Type D for 20 mm square chisel Thread gauge Set of interchangeable gears Gears for thread gauge (metric) Initial machine filling with high-quality oil Operating tools Options available upon request; we will be happy to advise you: - Three-jaw chuck / four-jaw chuck - Steel reamer / turning tool - Mounting elements - Commissioning Do you need a different machine? Please contact us!

Condition: used, Functionality: fully functional, CNC Bed-Type Milling Machine Manufacturer: Fritz Heckert Type: FKrSRS Control: Heidenhain 426 Table length: 1600 mm (length 3650 x width 2980 x 3620 mm) Clamping surface: 500 x 1600 mm (width) Clamping slots: 6 Upper width: 18 Center-to-center distance: 80 mm Maximum workpiece weight: 2000 kg Adjustment travel: Longitudinal X-axis: 1210 mm Transverse Y-axis: 515 mm Vertical Z-axis: 575 mm Rear edge of clamping table to column sliding surface: 245 - 760 mm Front edge of milling spindle to table surface: 105 - 680 mm Center of milling spindle to column sliding surface: 775 mm Number of milling spindles: 6 Tool holder: SK 50 Diameter of front milling spindle bearing 100 mm Maximum torque 210 kpm Largest cutterhead diameter for machining cast iron/steel/aluminum 200 / 200 / 250 mm Speeds 18 Range 28 - 1400 rpm Increment 1.25 Full-groove speed 90 rpm Feeds Adjustable in the x / y / z axes in increments of 1 mm/min. Set via F command 10 - 4000 mm/min. Rapid traverse 5000 m/min. Milling spindle drive power 18.5 kW Torque per feed spindle 49 Nm Ijlhccqjv U A Uujqstf Operating voltage 380 V Frequency 50 Hz Total power consumption 39 kW

Condition: excellent (used), Year of construction: 2022, XYZ 1530VS Gap Bed Centre Lathe 3 Jaw Chuck 2-axis Digital Readout Toolpost & Chuck Guard Footbrake (Modern Triumph 2000 size machine) Manufactured & Installed 2022 Machine Capacity: Swing Over Bed 390mm Swing in Gap 610mm Swing Over Cross Slide 150mm Distance Between Centres 30mm Cross Slide Travel 230mm Spindle: Spindle Speeds 20 – 2500rpm Spindle Power 5.75kW Spindle Bore 54mm Spindle Nose D1-6 For sale with Jet Machinery Ltd Jet Machinery Stock No: #78884 Machine Serial Number: 11008213 Cost: £11,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Ieljv Uyfqohccqqetf Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Year of construction: 2003, Functionality: fully functional, turning diameter over cross slide: 230 mm, spindle bore: 62 mm, turning diameter over bed slide: 400 mm, turning length: 1,000 mm, total length: 3,150 mm, total width: 1,500 mm, total height: 1,800 mm, rotational speed (max.): 2,000 rpm, overall weight: 2,400 kg, Equipment: rotational speed infinitely variable, Technical description according to data sheet Itelhcov Ux Taecqqef

Condition: like new (used), Year of construction: 2015, Specifications: Type CU 325. Spindle bore Ø32 mm. Quill height 165 mm. Turning length 500 mm. 12 speeds from 85-2000 RPM. 2.2 Kw. 400 Volt. Weight 650 Kg. Accessories: Centering chuck, Quick change steel holder with 4 side holders. Ijlev Umqaohccqqjtf Year 2015. Have a total of 6 pieces in stock. price is per piece