GP Trading & Services GmbH

Condition: used, Punching force: 350 kN (punches e.g. 23 m in 12 mm material) Nodpfx Aaoxqqphs Iedc Cuts 150 x 10 mm on the flat steel shears Two separate foot switches for the punching and shearing sides, allowing independent punching and shearing Support table on the punching side with stop cams A range of tools is included in the price

Condition: used, functionality: fully functional, operating hours: 1,249 h, Peddinghaus 210A/13 combined section steel shear with punch, flat bar shear, rod shear, profile shear, and notching device. Equipped with infeed and outfeed conveyor. Ndjdpfxoxqph No Aa Iec Bending capacity: 42 mm Punching capacity: 16 mm Motor power: 3 kW Round steel max: 25 mm Square steel max: 38 mm

Condition: used, functionality: fully functional, Year of construction: 2001, throat depth: 175 mm, punching force: 45 t, punching diameter: 28 mm, overall weight: 800 kg, Pressure, tn: 45 Punching capacity: Ø28 mm. in 13 mm. Ndedpfjxphiisx Aa Ijc Throat/reach: 175 mm. Flat bar: 300 x 10 /200 x 13 mm. Round bar: Ø30 mm. Square bar: 25 x 25 mm. Angle iron: 80 x 80 x 8 mm. Notching unit: Triangular. Year: 2001 Country of origin: Spain. Size (L x W x H): 1100 x 1500 x 1450 mm. Weight: 800 kg. All our machines are tested and serviced before delivery.

Condition: like new (used), functionality: fully functional, Year of construction: 2024, actuation type: hydraulic, throat depth: 175 mm, punching force: 45 t, punching diameter: 28 mm, overall weight: 800 kg, Equipment: CE marking, Condition: demo Nedpfxjxn Squs Aa Isdc Pressure, tn: 45 Punching capacity: Ø28 mm. in 13 mm. Throat/reach: 175 mm. Flat bar: 300 x 10 /200 x 13 mm. Round bar: Ø30 mm. Square bar: 25 x 25 mm. Angle iron: 80 x 80 x 8 mm. Notching unit: Triangular. Year: 2024 Country of origin: Spain. Size (L x W x H): 1360 x 1100 x 1500 mm. Weight: 800 kg. Delivered with punching table, notching table and 10 sets of round punches and dies tool no. 6 (Ø4-Ø28 mm.). Has only been used for display.

Condition: used, Year of construction: 2004, punching pressure 40.0 t square edge steel 28.0 mm L-beam 80 x 8.0 mm round bar steel 30,0 mm punch diameter 30 in 10 mm square material 28 x 28 mm shear: flat material 150 x 10 oder 100 x 15 mm Ndedpfxexau Uaj Aa Isc adjustment of stroke 35.0 mm strokes per minute max. 24 H/min. voltage 400 V weight 1020 kg dimensions 910 x 670 x 1930 mm from a maintenance workshop well-maintained condition (!!) Equipment: - electro-hydraulic profile steel shears - punching station, flat steel shears, angle steel shears, profile steel shears - stepless adjustment of the stroke - very compact design - support table at the notching and punching station - various MUBEA punches + dies - flat steel station with manual material hold-down device - protective devices at work stations - 1x freely movable foot switch - operating instructions (PDF)

Condition: used, punching pressure 45.0 t punch diameter 22 in 15.0 mm punch diameter 38 in 8.0 mm round bar steel 30.0 mm square edge steel 25.0 L-beam 100 x 10.0 mm shear: flat material 300 x 12.0 mm adjustment of stroke 0 - 55 mm work height max. 940 / 1140 mm strokes per minute 34 punch diameter max. 110 mm voltage 400 V total power requirement 4.5 kW weight 1245 kg dimensions 1520 x 590 x 1700 mm In good condition (!!) New price ~ 13.000 Euro Special price upon request Features: - Robust electro-hydraulic profile steel shear - With multiple workstations: Nsdpfxoxaat Ue Aa Ijdc * Punching station * Flat steel shear * Angle/profile steel shear * Notching station - Continuously adjustable stroke - Very compact design - Support table at the notching and punching station - Side support surfaces - 1x freely movable foot switch - Central lubrication system - Connection cable + connector

Condition: as good as new (ex-display), Year of construction: 2023, Technical data Strokes per minute with 15 mm stroke: 24 /min Punching force: 450 kN Motor power: 2.2 kW Hole diameter and thickness up to max.: 27×13 mm Flat steel up to max.: 300 x10/ 200×13 mm Ndsdpfx Aow N N H Dea Ioc Angle steel 90 degrees up to max.: 80x80x8 mm Angled steel 45 degrees up to max.: 60x60x6 mm Notching up to max.: 7 mm Machine weight: 760 kg

Condition: used, Pressure: ± 28 tons Punching capacity: Ø 20 mm at 10 mm / Ø 30 mm at 6.5 mm Flat bar capacity: 50 × 15 mm Angle iron cutting capacity: 65 × 6 mm Shear width: 175 mm Ndedpfx Asw N Nadea Isc

Condition: used, Profile shear for steel with notching unit Ndodpfx Aasw Ip D Hs Ijc Ideal for construction sites as it is mobile; of course also suitable for indoor use Peddinghaus 13 RP / 10 Angle profile: 60x7mm T-profile: 60x7mm Solid square: 20x20mm Round: 22mm Flat: 90x14mm Lever shear: Tmax: 10mm Pickup location: 28755 Bremen _____ Our general terms and conditions apply; the seller is not liable for typographical or data transmission errors. The appearance of the offered items corresponds to their age and the images shown. Technology and wear of the offered items are age-appropriate. Used machines are sold exclusively to tradespeople and without warranty.

Condition: used, Punching force: 400 kN (punches e.g. 20 m in 15 mm steel) Cuts 150 x 10 mm on the flat steel shears With pipe notcher on the bar shear Ndedow Im Shspfx Aa Ioc Foot switch for stroke activation Support table on the punching side Quick change device Range of tools is included in the price

Condition: used, functionality: fully functional, control type: manual, actuation type: manual, Rebar bending machine, completely overhauled by a former Peddinghaus employee Ndodpjw Dvz Ejfx Aa Ioc

Condition: used, Year of construction: 1996, total length: 1,600 mm, total width: 1,100 mm, total height: 1,500 mm, Empty weight: 500 kg Capacity bar: 30mm Ndodpfx Ajw Duwrsa Ioc Capacity strip: 300x10mm / 200x13mm Punch: diameter 28 in 13mm - Year: 1996 - Documentation available: No - CE marking present: Yes - Serial number: 4759 - Control: Conventional - Motor power: 2.2kW - Table width: 450mm - Table length: 800mm - Ram width: 60mm - Ram length: 45mm - Model: Hydraulic - Max. stroke: 80mm - Power: 45.0ton - Transport dimensions: 1600mm x 1100mm x 1500mm (l x w x h) - Transport weight [kg]: 500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), – Mechanical Ndodpewt Urzofx Aa Ioc – 5 stations – 380V

Condition: used, Technical details: throat: 250 mm number of strokes: 42 Hub/min sheet thickness - max.: 13 mm round bar steel: 36 mm square edge steel: 30 mm angle steel: 100 x 10 bei 90° mm flat steel: 100 x 18 mm U-H profile: NP 10 knife length: 230 mm total power requirement: 2,5 kW weight of the machine ca.: 1,7 t dimension machine xH: 2,1 x 1,0 x 1,6 m Application: Shearing - notching - punching Notching: material thickness = angle 50 x 8mm and rectangle 50 x 50 x 8mm Punching: max. 20 : 15mm, throat 250mm Njdpfx Aaswp Edae Iodc Foot control no longer available on both sides! Accessories various dies and various punches and small punches (see photo) *

Condition: used, Year of construction: 1976, round bar steel 28 mm square edge steel 25 mm L-beam 80 x 8 mm notching cap. mild steel max. 7 mm cutting capacity of the vertical shear 350 kN Punch power 190 kN shear: flat material 100 x 11 mm shear: length of knifes ca. 175 mm Ndsdpfjwm Rmnsx Aa Iec total power requirement 1,5 kW weight of the machine ca. 0,5 t dimensions of machine L x W x H 1,0 x 0,5 x 1,5 m

Condition: used, Max. punching and shearing power: 400 kN Ndsdpfjwfrc Iox Aa Ijc Punches e.g. 20 mm holes in 15 mm steel Shears on the flat steel shear on 120 mm to 12 mm steel Further technical data on request With a range of punches and dies as desired

Condition: good (used), punching force: 36 t, – Capacity: 36 tons – Hydraulic – 3 stations Ndjdpfxewdg Ipo Aa Iec – Foot operation – Lighting – Emergency stop – 400V

Condition: used, functionality: unexamined, Year of construction: 1979, cutting range square steel at 90°: 55 mm, cutting range round steel at 90°: 63 mm, overall weight: 7,350 kg, Equipment: documentation/manual, emergency stop, type plate available, Peddinghaus Caddy 63 Bar Shear Year of manufacture: 1979 Overhaul: 1999 Shear force: 20,000 kN Cycle rate: 59/min Machine dimensions: 2260 x 2920 x 1770 mm Weight: 7350 kg Shears: Round bar up to Ø63 mm, square bar up to Ø55 mm (depending on the material to be sheared) Included: Bar feeder with separator Dimensions: 6800 x 1750 x 2250 mm Weight: 4900 kg The machine can currently be inspected while running. Ndodpfx Aowbfn Nea Isc Delivery: ex works

Condition: used, functionality: fully functional, Year of construction: 1987, machine/vehicle number: 3009.87, peddinghaus punching and cutting machine. for specifications and capacities see nameplate on images. Ndjdpewazncsfx Aa Iec

Condition: excellent (used), Year of construction: 1979, Overhauled: 1999 Shear force: 2000 kN Cycle speed: 59 rpm Performance: Round bar up to 63 mm in diameter, square bar up to 55 mm Machine weight: 7350 kg Dimensions: 2260 x 2920 x 1770 mm Bar feeder with separation: Ndsdpfx Asv Ta Ucja Iec Max. bar length: 6 m Dimensions: 6.3 x 1.75 x 2.25 m Weight: 4000 kg Machine is still powered.

Condition: ready for operation (used), functionality: fully functional, Peddinghaus profile steel shears type 210 / 11 Ndsdpov H Ub Rofx Aa Ijc Technical details, see photos Accessories: all punching tools, see photo

Condition: used, Year of construction: 1979, round bar steel 28 mm square edge steel 25 mm L-beam 80 x 8 mm cutting capacity 35 t shear : steel sheet max. 10 mm Nsdovw Dvlopfx Aa Iodc shear: flat material 100 x 11 mm blade length 175 mm triangle notching device for sheet until 8 mm no. of strokes max. 35 Hub/min work stroke ca. 35 mm total power requirement 1,5 kW weight of the machine ca. 535 kg dimensions of the machine ca. 0,97 x 0,45 x 1,55 m Motorized 4-way profile steel shear on a rotating base and mobile. The machine can also be used for hole punching by purchasing a hole punching device (instead of a notcher). Photo 5 shows which tools the punching device can optionally be equipped with. All performance specifications refer to a material strength of 450N/mm². Machine dealer with own stock of 1600 m².

Condition: new, functionality: fully functional, Year of construction: 2023, New Sunrise punch cutting machine IW-45K available from stock. Specifications IW-45K tonnage 45ton punching capacity ᴓ 22x15mm/ᴓ 40x8mm Nodpfx Aajvf I Ibs Iodc discharge 165mm angle bar 75x75x6mm 90⁰ strip 300x10mm Weight 870 KG Dimension 1050x760x1490mm Multiple models available from stock.

Condition: used, Technical details: round bar steel: 32 mm square edge steel: 30 Ndjdpfx Asu Icghea Ioc angle steel: 90 x 8 mm flat steel: 100x18 mm Knife length: 220 mm number of cutting strokes max.: max. 30 Hübe/min p.Min. voltage: 220/380-50 V rated current: 15,8/8,55 connected load: 4,8 kW weight of the machine ca.: ca. 1,1 t Dimensions (LxWxH): 0,8 x 1,2 x 1,3 m Capacity: - Steel sheet: 16mm - Flat steel: 100 x 18mm - T profile: at 45°: 65 x 7mm, right angle: 90 x 8mm. Machine is in working condition *

Condition: good (used), punching force: 45 t, - Capacity 45 tons - Hydraulic Njdpfx Aaou Havwo Isdc - 4 stations - Foot control - Emergency stop - 400V