Used Tec Rotec for sale (117)

Condition: used, W x L 60 cm x 250 cm Godju Arh Rspfx Apwoka

Condition: new, empty load weight: 4,830 kg, overall weight: 44,000 kg, axle configuration: 3 axles, next inspection (TÜV): 03/2026, suspension: air, tire size: 385/55R22,5, Equipment: ABS, truck registration, | D-Tec VCC Container Chassis | Center and rear extension | 1st axle can be lifted | VALX axles with disc brakes | Tires: 385/55 R22.5 | New vehicles | Subject to errors, typing errors, and prior sale. Gkodpfx Aozrxbhjpwea

Condition: good (used), Year of construction: 1997, Portal center with high rigidity thanks to a cast construction and the latest technology in the area of control, vibration damping, dynamic axis movements and temperature stabilization of the machine frame. Even grinding is possible with high precision. Year of manufacture 1997 Gjdpfx Apjvt Dwbewska Renewed components: Milling spindle - entire control unit - guides Technical data - Travel ranges X 1,000 mm, Y 800 mm, Z 600 mm - Drive power 25 kW - Speed 30,000 rpm - Spindle mount HSK E 50 - Feed rate up to 30 m/min. Work table - Dimensions 1,200 mm x 1,000 mm - Max. workpiece weight 1,000 kg - Table with 3R system for workpiece clamping Control - RMS 6 Windows NT, including software for NC milling simulation in the latest version - Electronic hand control panel - Network card - Integrated workshop programming - Automatic spline interpolation - Windows NT enables direct milling path programming - Adjustable dynamics for high accuracy Machine structure - High machine rigidity due to portal construction in cast construction - Optimal vibration damping of the spindles due to cast-in special plastic - Temperature stabilization of the entire machine body - Crane loading possible Tool changer - 18 stations, dust-proof, with integrated measuring laser for tool length and diameter - Changing in sister tools, Dependent on tool life Equipment - Cooling unit for temperature stabilization - Fully protected cabin, cabin roof can be opened - Touching with 3D probe for quick setup - Integrated chip conveyor for easy disposal of chip waste Machine data - Space requirement (without service areas!) LxWxH approx. 4,200 mm x 3,350 mm x 4,200 mm - Weight approx. 13,000 kg - Connected load 50 kVA, 400V, 50/60 Hz The machining center is in very good condition and works reliably. There is no backlog of maintenance or repairs. A viewing under power and chip is possible by appointment. All tools and operating materials shown in the photos are not included in the scope of delivery of the machine. Technical changes and errors reserved.

Condition: used, Year of construction: 2000, functionality: fully functional, Röders RFM 600 high-speed milling machine Manufacturer: Röders Type: RFM 600 Year of manufacture: 2000 Condition: used, under power, control on Windows 7 NEW x-path 600 mm y-path 500 mm z-path 300 mm Control RÖDERS RMS 6 3.60 Spindle holder HSK E 40 Spindle speeds 42,000 rpm 18-position tool changer Table size 700×500 mm Workpiece weight 800 kg Drive 14 kW Total power requirement kW Machine weight approx. 5.2 t Space requirement approx. 3.2×2.25×2.65 m Röders Jobmanager (for processing several workpieces in succession) Probing programs for almost all common geometries Extor extraction system for dusty machining Minimum lubrication Bed path blower Blum measuring laser (for tool measurement length + diameter + contour and breakage control) Tool cleaning (air) Gsdpfx Aoztw Nmopwjka Cooling unit for spindle and switch cabinets documentation

Year of construction: 2010, condition: used, The belt dryer is ready for use; a video can be sent via WhatsApp. The dryer is no longer needed. It includes the feed screw, the blower unit, and the discharge screw, meaning it is complete. Gsdpfx Apjztwhvswjka

Condition: used, maximum load weight: 28,360 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 12/2021, loading space volume: 57 m³, total width: 2,550 mm, total height: 3,900 mm, Year of construction: 2021, Equipment: ABS, D-Tec FL-3-S Steel Tipper 57 m³ Exceptionally clean vehicle! * Load compartment length: 11,516 mm * Height: 3900 mm * Width: 2550 mm * Permissible total weight: 36,000 kg * Unladen weight: 7640 kg * SAF axles with disc brakes * 385/65 R22.5 tires * ABS * Aluminum rims * Aluminum support legs * Air suspension * Wheel chocks * 1st axle: lift axle * Open side impact protection * Grain chute * A-sign Gkodpfx Aozuhrbjpwja * Plastic toolbox * Platform * Rollover tarp, 680 gr/m² * 5x tarp holders * Multi-chamber lights (standard) * 4x work lights * LED marker lights with flashing function * Acoustic reversing warning We are available for further information.

Condition: new, functionality: fully functional, overall weight: 129 kg, Year of construction: 2026, Equipment: hydraulics, low noise, The TEC-POINT hydraulic hammer KT45S, in a sound-dampened design, is the professional solution for demolition work, concrete breaking, foundation work, civil engineering, sewer construction, garden and landscaping, municipal construction sites, inner-city operations, and work in noise-sensitive areas. The completely closed housing reduces noise generation and protects the internal components. The interchangeable upper swivel head ensures flexible application possibilities, while the large overall length enables a high reach and efficient energy transfer. ✅ Complete set for mini and compact excavators from 1.2 to 3.0 tons ✅ New / unused 📍 Immediately available from the warehouse in Rheda-Wiedenbrück 🚚 Local pickup or shipping by forwarding agent throughout Europe possible 💶 Price: €1,699 net plus VAT 🧾 Invoice with VAT shown will be issued 🛠️ Complete set including 1 pointed chisel, nitrogen bottle, hydraulic hose set, service case - ready for immediate use! ⚙️ Technical data: 🔹 Model: KT45 Silenced Type 🔹 Design: sound-dampened design 🔹 Suitable for excavator weight: 1.2 to 3.0 tons 🔹 Weight: 129 kg 🔹 Operating pressure: 90–120 kg/cm² 🔹 Required oil flow: 20–40 l/min 🔹 Impact frequency: 700–1200 impacts per minute 🔩 Connection dimensions / Compatibility: 🔹 Mounting width: 97 mm 🔹 Bolt center distance: 92 mm 🔹 Bolt / bore: Ø 30 mm 🔹 Chisel diameter: 45 mm On request, the appropriate mounting can be adapted to your excavator model. 📍 Location TEC-POINT GmbH Kupferstraße 10 33378 Rheda-Wiedenbrück Germany 📞 Contact & Inspection Gkodpfxsy Ny Igs Apwja Please contact us today – we will advise you personally and help you choose the right hydraulic hammer for your carrier device. We cordially invite you to visit our warehouse in Rheda-Wiedenbrück. On-site, you can inspect, compare, and, by arrangement, also test our machines and attachments. We look forward to your inquiry!

Condition: new, functionality: fully functional, power: 11.2 kW (15.23 HP), fuel type: diesel, fuel consumption per hour: 4 l/h, color: orange, operation weight: 1,550 kg, drive condition: 100 %, chain condition: 100 %, number of seats: 1, Year of construction: 2026, Equipment: adjustable chassis, air conditioning, cabin, parking heater, rubber tracks, ☀️ SUMMER PRICE – SUMMER PROMOTION! ☀️ Now only €11,490 instead of €11,890 The SE18 mini excavator, from the 1.8-tonne class, impresses with its compact dimensions, powerful performance, and high-quality equipment for professional use. Equipped with the proven Kubota D902 diesel engine, modern hydraulics, a comfortable fully enclosed cab with air conditioning, a heating function with remote control, and a comprehensive set of buckets, the machine is ready for immediate use. Whether in civil engineering, landscaping, municipal applications, or on tight construction sites, the SE18 offers maximum flexibility, high reliability, and a compelling price-performance ratio. ✅ Highlights at a glance ✅ Kubota D902 3-cylinder diesel engine – reliable, fuel-efficient, and long-lasting ✅ 1,550 kg operating weight – compact, stable, and powerful ✅ Fully enclosed cab with ROPS/TOPS – CE-certified and safe ✅ Air conditioning with heating function and remote control – comfortable working in all seasons ✅ 2 auxiliary hydraulic circuits – suitable for hammers, grapples, earth augers, etc. ✅ Adjustable undercarriage 1,000 – 1,250 mm – perfect for tight construction sites ✅ Side-swinging boom left/right – precise working near walls, edges, and obstacles ✅ Mechanical quick coupler included ✅ 3 buckets included in the set ✅ Immediately available – delivery possible 🔧 Technical data Model: SE18 Class: 1.8 t mini excavator Operating weight: 1,550 kg Engine: Kubota D902, 3-cylinder diesel Power: 11.2 kW Undercarriage: Rubber tracks, 230 mm Adjustable undercarriage: 1,000 – 1,250 mm Blade: 1,100 mm Gksdpfx Aox H Tiropwja Boom: Side-swinging left/right Pin diameter: 25 mm Auxiliary hydraulics: 2 auxiliary circuits Fully enclosed cab, CE-certified, ROPS/TOPS Air conditioning with heating function, opening front window, sliding side window Included in the scope of delivery: ✔ Digging bucket 30 cm with teeth ✔ Digging bucket 50 cm ✔ Digging bucket 80 cm ✔ Mechanical quick coupler ✔ Hydraulic thumb / grapple thumb ✔ Air filter ✔ Fuel filter ✔ Oil filter ✔ Toolbox ➡️ Get in, start, and work – the machine is ready for immediate use. 🛡️ Safety & Certification The machine is CE-certified and complies with the relevant European directives: ✅ 2006/42/EC – Machinery Directive ✅ 2014/30/EU – EMC Directive ✅ 2011/65/EU – RoHS Directive The cab is equipped with a ROPS/TOPS safety structure and offers the driver protection, a good overview, and comfort. 🧰 Service & Warranty ✅ 12 months warranty throughout Europe ✅ Spare parts available directly from stock ✅ Service and support from Rheda-Wiedenbrück ✅ On-site inspection and testing possible 🔥 Summer promotion price only €11,490 net – complete set included! 📍 Location: Rheda-Wiedenbrück, Germany 🚚 Delivery possible ✅ Immediately available ✅ Machine is ready for use Our machines can be inspected and tested on-site. Contact us for more information, a customized offer, or a short-term viewing appointment.

Condition: used, empty load weight: 4,689 kg, maximum load weight: 39,311 kg, overall weight: 44,000 kg, axle configuration: 3 axles, first registration: 01/2019, next inspection (TÜV): 08/2027, total length: 24,700 mm, total width: 12,800 mm, total height: 95,250 mm, suspension: air, tire size: 385/65 R 22.5, wheelbase: 7,400 mm, color: blue, Year of construction: 2018, front tire size: 385/65 R 22.5, rear tire size: 385/65 R 22.5, emission class: none, Axle manufacturer BPW, anti-spray system, disc brakes, air suspension, lifting and lowering function, lift axle on axle 1 and 3, 2x extendable (front and rear), suitable for: 45' container, 40' container, 30' container, 2x 20' containers and 20' container flush at the rear, 15 + 2x 7-pin connectors, 2x LED work lights at the rear, chassis height and saddle height: 1,110 mm, toolbox. Gjdpfx Aszt Anzjpwska

Condition: like new (used), functionality: fully functional, input voltage: 230 V, total length: 1,200 mm, year of last overhaul: 2025, total width: 500 mm, total height: 1,050 mm, DGUV certified until: 09/2027, conveyor belt width: 300 mm, input frequency: 50 Hz, Equipment: chassis, bm TEC dough conveyor belt, foldable Belt width: 300 mm Gjdpjy Ik Alsfx Apweka Belt speed: infinitely adjustable Stainless steel design Exclusive to us: DGUV V3 tested Approx. dimensions: 1200 x 500 x 1050 mm (W x D x H) Connection: 230 V Used machine, cleaned & SAB tested We have many more bakery machines in stock!

Condition: excellent (used), functionality: fully functional, input voltage: 230 V, total length: 700 mm, year of last overhaul: 2025, total width: 550 mm, total height: 800 mm, DGUV certified until: 09/2027, conveyor belt width: 350 mm, input frequency: 50 Hz, Equipment: chassis, bm TEC Dough Conveyor Belt, short version Belt width: 350 mm Belt speed infinitely adjustable Stainless steel construction Gedpfx Apey Ik Afewska DGUV V3 tested exclusively by us Dimensions approx.: 700 x 550 x 800 mm (W x D x H) Connection: 230 V Used machine, cleaned & SAB tested We have more bakery machines in stock!

Condition: refurbished (used), functionality: fully functional, 5-axis HSC milling machine Röders RXP500DS with linear direct drives in all axes and torque drives in the rotary axes. The machine will be completely overhauled, inspected, and measured in our workshop. The machine will once again meet new machine tolerances! Travel ranges: X450mm, Y400mm, Z240mm Distance spindle/table: approx. 315mm - Linear direct drives in all axes - wear-free - Tool changer, 42-position - Cooling unit for drives, milling spindle, and control cabinet - Measuring laser for fully automatic measurement of milling tools (length/diameter/contour/taper angle) as well as wear monitoring including tool cleaning before measurement - Handbox - Remote maintenance - Automatic 3D probe including calibration sphere in the tool changer Gsdpjzmgt Iofx Apwjka - Minimum quantity lubrication - Emulsion cooling - Spindle HSK40E with max. 42,000 rpm - Spindle length compensation - Zero-point clamping system EROWA integrated into the machine table - Manual chuck control - Automation RC2 pallet changer for 45 Erowa ITS50 pallets - ideal for the production of electrodes An inspection of the machine in operational condition is possible at any time. You can also find information about the type and scope of our overhauled machines on our website or on our Hüttmann YouTube channel.

Condition: used, axle configuration: 2 axles, first registration: 02/2011, loading space length: 10,500 mm, loading space width: 2,490 mm, loading space height: 2,670 mm, total length: 11,100 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/55R22,5, wheelbase: 6,720 mm, color: other, Year of construction: 2011, Equipment: ABS, tail-lift, = Further Options and Equipment = - EBS (Electronic Braking System) - Tail lift - Central lubrication = Remarks = Number of axles: 2, Payload: 24,680 kg, Own weight: 8,320 kg, Gross weight: 33,000 kg, Kingpin size: 2 inch, Central lubrication, Suspension type: full air suspension, ABS, EBS, Body year: 2011, Axle type: BPW, Tail lift = Further Information = General Information Cab: Day cab Registration number: OL-06-GS Driveline Fuel type: Diesel Transmission Gearbox: Manual transmission Axle Configuration Tyre size: 385/55R22.5 Brakes: Drum brakes Suspension: Air suspension Axle 1: Lift axle; left tyre tread: 6 mm; right tyre tread: 4 mm Axle 2: Lift axle; left tyre tread: 6 mm; right tyre tread: 4 mm Weights Unladen weight: 8,320 kg Payload: 24,680 kg Gross vehicle weight: 33,000 kg Environment Emission class: Euro 0 Condition General condition: average Technical condition: average Optical condition: average Damages: none = Company Information = Kleyn Trucks is one of the world's largest independent traders of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our offer covers all European brands, model years, and price classes. Why buy at Kleyn Trucks? Easy! Gkedpjw Da A Tofx Apwea • Large, fast-changing stock • Recognisable quality • Competitive prices • Reliable business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration plates arranged quickly • Expert technical services • The assurance of 'recognisable quality' • And much more.... Please visit our website for special offers and our full stock. Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send a request through our website. Ask directly about our European warranty package.

Condition: used, axle configuration: 2 axles, first registration: 10/2010, suspension: air, tire size: 385/55R22,5, wheelbase: 11,280 mm, color: other, Year of construction: 2010, Equipment: ABS, = Additional Options and Accessories = - EBS = Remarks = Number of axles: 2, Payload: 30,320 kg, Unladen weight: 11,680 kg, Gross weight: 42,000 kg, Suspension type: Full air, ABS, EBS, Year of body construction: 2010, Axle type: BPW = Further Information = General Information Cab: Day Registration number: OL-69-DV Drivetrain Fuel type: Diesel Transmission Gearbox: Manual transmission Axle Configuration Tyre size: 385/55R22.5 Brakes: Drum brakes Suspension: Air suspension Axle 1: Tyre tread left: 4 mm; Tyre tread right: 5 mm Axle 2: Steered; Tyre tread left: 4 mm; Tyre tread right: 4 mm Weights Unladen weight: 11,680 kg Payload: 30,320 kg Gross vehicle weight (GVW): 42,000 kg Environment Emission class: Euro 0 Condition Overall condition: Fair Technical condition: Fair Optical condition: Fair Damage: None = Company Information = Kleyn Trucks is one of the world’s largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our offer includes all European makes, model years, and price ranges. Gkodpfx Aow Da A Hjpwja Why buy from Kleyn Trucks? Simple! • Large, fast-changing inventory • Reliable, recognizable quality • Competitive prices • Trustworthy business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration plates arranged promptly • Expert technical services • The security of ‘recognizable quality’ • And more.... Please visit our website for special offers and a complete stock list. Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send us an inquiry via our website. Ask directly about our European warranty package.

Condition: used, axle configuration: 3 axles, first registration: 08/2014, color: other, Year of construction: 2014, Empty weight: 4.962 kg Axle 1: left 10 mm right 10 mm Godpoztb Tpjfx Apweka Axle 2: left 10 mm right 10 mm Axle 3: left 10 mm right 10 mm We have the possibility to stack trailers!

Condition: used, empty load weight: 4,689 kg, maximum load weight: 39,311 kg, overall weight: 44,000 kg, axle configuration: 3 axles, first registration: 07/2018, next inspection (TÜV): 01/2027, total length: 24,700 mm, total width: 12,800 mm, total height: 95,250 mm, suspension: air, tire size: 385/55 R22,5, Year of construction: 2018, front tire size: 385/55 R22,5, rear tire size: 385/55 R22,5, emission class: none, Equipment: ABS, ABS, axle manufacturer BPW, ADR, anti-spray, disc brakes, air suspension with lift function, raising and lowering, lift axle on axle 1 and 3, 1x20 / 2x20 / 1x30 / 1x40 / 1x45, high-cube, 2x7 + 15-pin electrical connectors, center extension, rear extension, Genset Transcool Compact 16, 1,369 operating hours, 2x LED reversing lights. Gedpfx Apjzra Ntjwska

Condition: used, axle configuration: 3 axles, first registration: 01/2016, color: other, Year of construction: 2016, Empty weight: 4.861 kg Axle 1: left 8 mm right 8 mm Axle 2: left 8 mm right 8 mm Axle 3: left 8 mm right 8 mm We have the possibility to stack trailers! Gkodpfxszrwzys Apwoa

Condition: used, axle configuration: > 3 axles, first registration: 01/2007, color: other, Year of construction: 2007, Empty weight: 10.300 kg Axle 1: left 8 mm right 8 mm Axle 2: left 10 mm right 10 mm Gkodpfx Ajzrgl Ispwsa Axle 3: left 10 mm right 10 mm Axle 4 left 8 mm right 8 mm We have the possibility to stack trailers!

Condition: used, empty load weight: 4,644 kg, maximum load weight: 38,356 kg, overall weight: 43,000 kg, axle configuration: 3 axles, first registration: 11/2016, next inspection (TÜV): 05/2026, total length: 24,700 mm, total width: 14,200 mm, total height: 94,300 mm, suspension: air, tire size: 385/55 R22,5, Year of construction: 2016, front tire size: 385/55 R22,5, rear tire size: 385/55 R22,5, emission class: none, Equipment: ABS, ABS, SAF axle manufacturer, ADR, disc brakes, air suspension with lift, lifting and lowering, lift axle on 1st axle, 1 x 20, 2 x 20, 1 x 30, 1 x 40, 1 x 45, central extension, rear extension, 2x 7-pin + 15-pin connectors, 2x reversing lights Godpfx Apoyfiiqowska

Condition: used, empty load weight: 4,551 kg, maximum load weight: 39,449 kg, overall weight: 44,000 kg, axle configuration: 3 axles, first registration: 11/2019, total length: 24,700 mm, total width: 12,800 mm, total height: 95,250 mm, suspension: air, tire size: 385/55 R 22.5, Year of construction: 2019, front tire size: 385/55 R 22.5, rear tire size: 385/55 R 22.5, emission class: none, Equipment: ABS, ABS, axle manufacturer BPW, ADR, anti-splash guard, disc brakes, air suspension with lift function, lifting and lowering, lift axle on the 1st and 3rd axle, 1x20 / 2x20 / 1x30 / 1x40 / 1x45, high-cube, 2x7 + 15-pin electrical connections, central extension, rear extension, Genset Transcool Compact 16, aluminum wheels, 4,479 operating hours, 2x LED reversing lights. Gkedpfx Apezqym Aowja

Condition: used, empty load weight: 4,689 kg, maximum load weight: 39,311 kg, overall weight: 44,000 kg, axle configuration: 3 axles, first registration: 10/2018, total length: 24,700 mm, total width: 12,800 mm, total height: 95,250 mm, suspension: air, tire size: 385/55 R22,5, Year of construction: 2018, front tire size: 385/55 R22,5, rear tire size: 385/55 R22,5, emission class: none, Equipment: ABS, ABS, axle manufacturer BPW, ADR, anti-splash guard, disc brakes, air suspension with lift function, lifting and lowering, lift axle on the 1st and 3rd axles, 1x20 / 2x20 / 1x30 / 1x40 / 1x45 (tire sizes), central extension, rear extension, 2x 7-pin + 15-pin electrical connectors, high cube, tool box, 2x LED reversing lights. Gkodpfx Apezqymvewea

Condition: used, empty load weight: 5,571 kg, maximum load weight: 37,429 kg, overall weight: 43,000 kg, axle configuration: 3 axles, first registration: 03/2017, next inspection (TÜV): 11/2026, total length: 24,700 mm, total width: 14,200 mm, total height: 1,40,100 mm, suspension: air, tire size: 385/55 R 22.5, color: blue, Year of construction: 2017, front tire size: 385/55 R 22.5, rear tire size: 385/55 R 22.5, emission class: none, Equipment: ABS, ABS, axle manufacturer BPW with disc brakes, air suspension with lift function (raising and lowering), lift axle on the first axle, central and rear extension, 20-45 feet, gooseneck hitch, 2 x LED reversing lights, 2 x 3-chamber tail lights, Genmark genset. Gjdpfxey T Sqhs Apwjka

Condition: used, axle configuration: 3 axles, first registration: 01/2016, color: other, Year of construction: 2016, Empty weight: 4.861 kg Axle 1: left 8 mm right 8 mm Axle 2: left 10 mm right 10 mm Axle 3: left 8 mm right 8 mm Gkodpfx Apozrfgqswea We have the possibility to stack trailers!

Condition: new, maximum load weight: 28,900 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 10,184 mm, loading space width: 2,550 mm, total width: 2,550 mm, total height: 3,722 mm, Year of construction: 2026, Equipment: ABS, Bodywork * Docking funnel 8" mounted at the upper rear, behind the tank, lockable with a manual slide gate * Direct idling at the rear side * Automatic pump shut-off * Lincoln centralized lubrication system for optimal time-based lubrication of slewing rings and axles (for drum brake 36P) * Bracket with two wheel chocks Pump * Vogelsang pump, capacity 6,000 L/min Axles * VALX axles with drum brakes, 9 tonnes, offset 0 Brakes * WABCO EBS braking system * WABCO tire pressure monitoring system according to R141 * TPMS system Axles * Forced-steering axles Tire size * 385/65 R22.5, 9 t Tires * Brand: APOLLO Lighting * 24-volt lighting system * Side marker lamps with integrated flashing function * Work lights left and right at the first axle * Two LED work lights at the rear (one left, one right, mounted on the hose racks) * Two 7-pin connectors and standard 15-pin connector Accessories * Ball valves for complete tank emptying * Stainless steel vent container Paintwork * Tank painted RAL 7030 stone grey * Chassis painted RAL 7016 anthracite grey Gkedpfx Apsxmudnowoa

Condition: excellent (used), functionality: fully functional, input voltage: 230 V, total length: 2,150 mm, year of last overhaul: 2025, total width: 550 mm, total height: 700 mm, DGUV certified until: 09/2027, conveyor belt width: 350 mm, input frequency: 50 Hz, Equipment: chassis, bm TEC Dough Conveyor Belt, long version Belt width: 350 mm Belt speed: continuously adjustable Stainless steel design Includes DGUV V3 certification Dimensions approx.: 2150 x 550 x 700 mm (W x D x H) Connection: 230 V Gedsy Ik Arspfx Apwska Used equipment, cleaned and SAB inspected Visit our large showroom!