Used Brewing equipment for sale (125)

Year of construction: 2013, condition: used, Complete production and filling plant for a pub brewery, consisting of the following components: 1. Milling plant Milling mill with malt feed hopper and pipe chain conveyor system for malt grist. 2. Brewhouse 2-unit brewhouse (Kaspar Schulz, built in 2013) as a brewing block with copper-clad stainless steel vessels. The wort is cooled by a separate plate heat exchanger (API Heat Transfer, built in 2013) with downstream wort aeration. There is also a hot water tank (Kaspar Schulz, 2013) with insulation and heating jacket. 3. Fermentation and storage cellar 4 cylindroconical fermentation and storage tanks (Kaspar Schulz, built in 2013) with a gross volume of 12 hl each and a maximum overpressure of 3 bar. 3 cylindroconical fermentation and storage tanks (Kaspar Schulz, 2013) with a gross volume of 25 hl each and a maximum overpressure of 3 bar. The temperature of these 7 cylindroconical fermentation and storage tanks is controlled by a common control cabinet. In addition, there are 2 further cylindroconical fermentation and storage tanks (Kaspar Schulz, built in 2013) with a gross volume of 14.7 hl each and a maximum pressure of 3 bar. The temperature of these two cylindroconical fermentation and storage tanks is controlled by another control cabinet. 4. Pressure tank cellar / serving cellar 5 upright pressure tanks (Kaspar Schulz, 2013) with clamp heads, each with a gross capacity of 10.5 hl and a maximum pressure of 3 bar. 5. Filling room Siphon filler/glass bottle filler (JS Maschinen) with 6 filling heads. Keg interior and exterior washer (Scheuer) with spray nozzles in stainless steel housing and lye tank in the base. Keg filling station with taps for direct filling of kegs from the pressure tanks. 6. Operating/supply technology Refrigeration system (Hafner-Muschler, 2013) as an ice water storage system with R404a refrigerant and 3 refrigeration compressors. Oil-free compressed air piston compressor (Kaeser, 2013) with a maximum operating pressure of 10 bar and compressed air refrigeration dryer (Kaeser, 2013) with refrigerant R134a. Air separator (AST) as nitrogen generator with adjacent nitrogen pressure tank. Additional title: complete brewing plant with copper-clad brewhouse Cast wort capacity: 10 hl Ledpsw Uvfwjfx Aabshn Features: grain mill, malt transport system, 2-unit brewhouse made of stainless steel (copper clad), wort cooling, hot water tank, 9 fermentation tanks (4 x 12 hl, 3 x 25 hl, 2 x 14.7 hl), pressure tanks (5 x 10.5 hl), siphon filler, keg washing system, keg filling station, compressed air system, refrigeration system, N2 generator,

Condition: like new (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 100026053, pressure: 12 bar, temperature: 191 °C, production capacity: 4,000 unit/h, STEAM BOILER ICI CALDAIE SIXEN 4000 Capacity: 4000 kg/hour. Max Temp: 191.7 °C Pressure: 12 Bar Excellent condition, used for a short period, equipped with a system for 72-hour unattended operation. Lhsdpfx Aajxqffksben The complete boiler and water treatment system is sold at the advertised price.

Condition: used, Year of construction: 2011, Raw Steam Generator 22 Tons per Hour at 10 Bar Bosch HTC | 2011 Ledpfsxqpkwex Aabshn

Condition: used, tank capacity: 1,175 l, Location: Bremen Condition: factory new Volume: 1,175 liters Tank Max. operating temperature of tank: 50°C Lhjdpfxjxqcqds Aabon Max. overpressure: 2.50 bar Design: upright Tank Base type: height-adjustable feet Number of feet: 4 pieces Heating/Cooling: available Double jacket volume: 7.0 liters Max. permissible operating overpressure: 3.0 bar Max. permissible operating temperature: 50°C Cylinder temperature control: Thermoplate Heating/cooling jacket Bottom temperature control: Thermoplate Internal diameter: 1,000 mm Cylindrical height: 1,250 mm Total height: 2,050 mm Technical documentation: drawing Equipment Manhole / dome: in the cylinder Nameplate: Equipment: spray head, crane lugs Equipment Outlet: DN50 DIN 11851 Material properties External surface: ground Internal surface: ground Product-contact material: V2A 1.4301 (AISI304) Double jacket material: V2A 1.4301 (AISI304) Material properties Foot material: stainless steel

Year of construction: 2013, condition: like new (used), Turn-key drink equipment for beer production. Capacity: 1000 l/brew for up to 200.000 l/y. Suitable for different recipes. Based on an external cooker (Calandria system). Full automation of production. Lhjdpoigvxkofx Aabsn

Condition: used, Spray pasteurizer Belt width: 150 cm Belt length: 1000 cm Lsdpfx Ajxpaiuoabehn

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: K123-636, Equipment: type plate available, Used bottle filler, KRONES 066-103/KK11-M from 1997 for sale • Output: 22,000 bph (0.5 L bottles) and 24,000 bph (0.33 L bottles) Specifications: Used Krones returnable glass bottle filler for beer and soft drinks Model: 066-103 • Year of manufacture: 1997, commissioned in 1997 • 66 filling valves / 11 capper heads, short filling tubes • Clockwise rotation (L-R), diameter 2,880 mm • Double evacuation, splinter washer • Crown cork handling • Capacity for 500 ml bottles: 22,000 bph • Currently configured for 500 ml and 330 ml bottles, with format parts available for changeover Previously part of a multiblock with labeller station, which is no longer included. Filler control system: Siemens S5 (updated 2009) Products filled: beer, alcohol-free beer, long drinks, cocktails, cider, soft drinks, carbonated water, still water Lhjdpfxsxp I Apo Aabjn Maintenance: Labeller deblocked in 2009 Regularly maintained by KRONES throughout its life—especially filler valves and components In production until 01/2026

Condition: like new (used), Item: H-10707-Complete Aseptic UHT Filling Line Complete Non-Carbonated Aseptic UHT Filling Line for Drinks Specifications: Lhodpfspmtb Uox Aaben Output: 2,500 bottles per hour (bph) Bottle Capacity: Ranges from 0.2L to 1.5L (current bottle size in use: 0.5L) Closures: 28 PCO 1810 (Conversion to 1881 is possible with minor technical adjustments) Labeling: Sleever Packaging: 3 x 4 and 3 x 2 configurations Technical Parameters: Staffing: Only 3 personnel per shift needed for full operation. Production Capacity: 900 - 1,200 liters per hour. Shelf Life: 24 months without preservatives, thanks to UHT technology and a specialized disinfection/rinsing system. Bottling Temperature Range: 5-40 °C Heat Treatment: Sterilization temperatures between 60-150 °C (UHT) with a duration of 45 seconds. Write email with your company data for more informations.

Year of construction: 2018, condition: used, (1) Vertical Stainless Steel 25,000 Litre Jacketed Pressure Vessel paired with Mini Run Skid Lhsdexqpi Tspfx Aabjn

Year of construction: 2015, condition: used, tank capacity: 1,195 l, Location: Bremen Condition: unused Capacity: 1,195 litres Tank Lhsdpsxqcp Tofx Aabon Max. operating temperature tank / °C: 50 °C Max. overpressure: 3.00 bar Design: vertical Tank stand type: feet Number of feet: 3 pieces Heating/cooling: available Double jacket volume: 2.0 litres Max. permissible operating overpressure: 6.0 bar Max. permissible operating temperature: 50 °C Cylinder tempering: Thermoplate Insulation: available Insulation Insulation jacket: hermetically welded Insulation material: mineral wool Insulation jacket material: stainless steel Insulation thickness / mm: 80 mm Internal diameter: 1,000 mm External diameter: 1,200 mm Cylindrical height: 1,250 mm Total height: 2,340 mm Year of manufacture: 2015 Technical documentation: drawing, TÜV certificates, CE marking and declaration of conformity, operating manual Features Manway / dome: in the cylinder Nameplate: Equipment: level indicator (no guarantee), spray head, crane lugs Features Outlet: DN40 DIN 11851 Material properties Internal surface: high gloss Product contact material: V2A 1.4301 (AISI304) Double jacket material: V2A 1.4301 (AISI304) Material properties Foot material: stainless steel

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Labelling Machine – Krones Vinetta (refurbished, operational, excellent condition) For sale is a fully functional Krones Vinetta labelling machine with wet glue technology – reliable, robust, and ready for immediate use. Technical specifications & features: Manufacturer: Krones AG Model: Vinetta Year of manufacture: approx. 1998 General overhaul: 2021 (completely overhauled both mechanically and electrically) Output: approx. 2,500 bottles/hour Bottle sizes: 0.33 l and 0.5 l Labelling stations: 2 (stations for front and back labels) Labelling method: Wet glue with 2 wet glue pumps Control system: Siemens PLC (modernised, user-friendly) Condition: in ongoing operation, technically and visually immaculate Documentation: complete technical documentation available Special features: Proven Krones quality, durable and low-maintenance Precise labelling even at variable output speeds Spare parts supply still guaranteed by Krones Compact design – fits perfectly into smaller bottling lines Performance class: Ideal for bottling lines between 2,000 and 3,000 bottles per hour Ledpfx Aoxpunxjabehn

Condition: used, functionality: limited functionality, We are selling three of our combustion boilers due to a new purchase. Further information and photos are available upon request. They can also be purchased individually. On-site inspection is possible. Lhodpfjxnxb Tsx Aaben

Year of construction: 2020, condition: new, For crown capper ø26mm Lsdpfx Asclq Ufeabjhn incl. sorting unit, for easy application of the crown capper onto the bottles. Stainless steel construction with mit synthetical sorting unit. capacity approx. 300- 500 B/h also available for ø29mm crowncaps

Year of construction: 2019, condition: used, (1) Brew House Effluent Water Heat Exchanger Economiser Skid Lsdpjxqphijfx Aabshn

Year of construction: 2011, condition: used, tank capacity: 1,100 l, Location: Bremen Lsdpfx Asxqcp Hjabehn Condition: Unused Volume: 1,100 litres Container Max. operating temperature (container) / °C: 50 °C Max. overpressure: 3.00 bar Container Bottom type: Conical bottom Design: Vertical Container Support type: Feet Number of feet: 4 pcs. Heating/cooling: Available Double jacket volume: 10.0 litres Max. permissible operating overpressure: 6.0 bar Max. permissible operating temperature: 50 °C Cylinder temperature control: Thermoplate Insulation: Present Insulation Insulation jacket: Hermetically welded Insulation material: Mineral wool Jacket material: Stainless steel Insulation thickness / mm: 100 mm Inner diameter: 1,000 mm Outer diameter: 1,200 mm Cylindrical height: 1,000 mm Total height: 2,580 mm Year of construction: 2011 Technical documentation: Drawings, TÜV documents, CE marking and declaration of conformity, operating manual Equipment Manhole / inspection port: In cylinder Nameplate: Equipment: Level indicator (no guarantee), disk valve, spray head, lifting lugs Equipment Outlet: DN40 DIN 11851 Remarks: Exhibition tank – slight signs of use; yeast plug mounted inside Material specifications Internal surface: High-gloss Product-contacting material: V2A 1.4301 (AISI304) Double jacket material: V2A 1.4301 (AISI304) Material specifications Feet material: Stainless steel

Year of construction: 2015, condition: new, Beer short-time-heating steamheated Lhjdpfx Aascltpyjbon capacity 2000 l/h preheating, backcooling and icewaterplateheatexchanger

Condition: used, (1) Vertical Stainless Steel Bright Beer Tank 2200/2330 hL Ledpfsxqpglsx Aabohn

Condition: used, tank capacity: 10,000 l, Location: Bremen Condition: used Volume: 10,000 liters Max. overpressure: 5.00 bar Tank Max. operating temperature (tank): 20 °C Construction: vertical Tank Support type: adjustable feet Number of feet: 4 pcs Insulation: available Insulation Insulation jacket: hermetically welded Material of insulation jacket: stainless steel Lhedpfx Aaoxqcpyjbjn Inner diameter: 1,800 mm Outer diameter: 2,000 mm Cylindrical height: 4,000 mm Overall height: 5,200 mm Technical data / dimensions Wall thickness (ends): 7 mm Wall thickness (cylinder): 5 mm Technical documentation: drawing, TÜV papers Equipment Manhole / access port: in cylinder Nameplate: Equipment: level indicator (without guarantee) Equipment Outlet: pipe end, approx. 40 mm diameter Note: slight residues, outlet end cut off Last application: ice water tank in a dairy Product-contact material: V2A 1.4301 (AISI304) Material properties Material (feet): stainless steel

Year of construction: 2025, condition: new, chamber pasteurizer, with water sprinkler, temperature control for heating rate, holding time and cooling time, Lhjdpfjykgxex Aabon heat supply over hot water heat exchanger throughput: 360 pcs. 1 liter bottles per hour or 550 pcs. 0.5 liter bottles

Condition: used, tank capacity: 13,700 l, Location: Bremen Condition: used Volume: 13,700 liters Max. overpressure: 1.0 bar Tank Max. operating temperature of tank: 20 °C Bottom type: conical bottom Design: vertical Tank Support type: height-adjustable legs Lsdpfx Aajxqcptjbohn Number of legs: 4 Heating/cooling: fitted Double jacket volume: 40.0 liters Max. allowable operating overpressure: 3.0 bar Max. allowable operating temperature: 2 °C Cylinder temperature control: rectangular half-pipe coil Internal diameter: 2,600 mm Cylindrical height: 1,800 mm Overall height: 4,650 mm Technical data / Dimensions Wall thickness (bottom): 4 mm Wall thickness (cylinder): 3 mm Technical documentation: drawing Features Manhole / access port: in top head (DN 400) Nameplate: Fittings: disc valve, spray head, lifting lugs Features Outlet: DN65 DIN 11851 Notes: Cone height approx. 1,300 mm Last intended use: yeast tank in a brewery Product-contact material: V4A 1.4571 (AISI316) Material properties Temperature control system material: V2A 1.4301 (AISI304) Material of legs: stainless steel

Condition: used, tank capacity: 15,000 l, Location: Bremen Condition: used Capacity: 15,000 liters Lsdpfx Aajxqcpgobshn Max. overpressure: 1.0 bar Tank Max. operating temperature tank / °C: 25°C Design: vertical Tank Support: feet Number of feet: 3 units Heating/cooling: available Double jacket volume: 30.0 liters Max. permissible operating overpressure: 2.0 bar Max. permissible operating temperature: 3°C Cylinder tempering: half-pipe coil Internal diameter: 2,200 mm Cylindrical height: 3,360 mm Total height: 5,900 mm Technical data / dimensions Bottom wall thickness: 3.4 mm Cylinder wall thickness: 3.5 mm Equipment Manhole / dome: in the cylinder (approx. 350 x 450 mm) Nameplate: Equipment: spray head Equipment Outlet: DN80 DIN 11851 Note: slight residues Remarks: Bracing between the feet made of mild steel (see photos) Previous use: brewery Product-contact material: V2A 1.4301 (AISI 304) Material properties Foot material: stainless steel

Condition: used, tank capacity: 10,500 l, Location: Bremen Condition: used Volume: 10,500 liters Max. overpressure: 1.5 bar Tank Max. operating temperature / °C: 20 °C Design: vertical Tank Support type: height-adjustable feet Number of feet: 3 pcs Internal diameter: 1,500 mm Cylindrical height: 5,500 mm Lsdexqcn Nspfx Aabshn Total height: 6,800 mm Technical data / Dimensions Bottom wall thickness: 2.5 mm Shell wall thickness: 2.5 mm Technical data / Dimensions Top wall thickness: 2.1 mm Technical documentation: drawings, TÜV documents, various papers Features Manhole / Dome: in cylinder (approx. 350 x 450 mm) Nameplate: Equipment: spray head, crane lugs Features Outlet: DN80 DIN 11851 Note: pressure marks on cylinder Remarks: 1 stainless steel sheet inside lower base (see photos); wall thickness of lowest cylinder segment: 3 mm Previous use: brewery Product-contact material: V2A 1.4301 (AISI304) Material properties Foot material: stainless steel

Condition: used, tank capacity: 1,285 l, Location: Bremen Condition: used Volume: 1,285 liters Max. overpressure: 2.0 bar Tank Max. operating temperature (tank / °C): 50 °C Bottom type: conical bottom Design: upright Tank Support type: height-adjustable feet Number of feet: 4 pcs. Heating/cooling: available Cylinder temperature control: double jacket Heating/cooling jacket Bottom temperature control: double jacket Insulation: available Insulation Insulation jacket: hermetically welded Insulation jacket material: stainless steel Internal diameter: 1,000 mm External diameter: 1,160 mm Cylindrical height: 1,250 mm Total height: 3,050 mm Technical data / dimensions Bottom wall thickness: 2 mm Cylinder wall thickness: 2 mm Technical data / dimensions Top wall thickness: 2.5 mm Technical documentation: drawing Equipment Manhole / dome: in top Equipment: disc valve, spray head Equipment Lhsdpfx Aasxqcnvobsn Outlet: DN40 DIN 11851 Note: slight residue Remarks: According to the previous operator, these tanks were last used as fermentation tanks in a brewery with an operating pressure of +2 bar. According to the drawing, the tanks were tested with a test pressure of +4 bar. However, no TÜV inspection was carried out. Manhole diameter: 350 mm. One tank is missing 1 height-adjustable dome screw for the feet; on 1 tank, the manhole cover suspension is incomplete. Last application: Brewery Product-contact material: V2A 1.4301 (AISI304) Material properties Temperature control system material: V2A 1.4301 (AISI304) Feet material: stainless steel

Condition: used, tank capacity: 1,80,000 l, Location: External storage Condition: Used Volume: 180,000 liters Max. overpressure: 1.5 bar Tank Max. operating temperature (tank): 18°C Bottom type: Conical bottom Design: Suspended Lodpfoxqcnijx Aabshn Heating/cooling: Available Double jacket volume: 1,462.0 liters Max. permitted operating temperature: 20°C Cylinder temperature control: Half-pipe coil Insulation: Available Internal diameter: 4,100 mm External diameter: 4,500 mm Cylindrical height: 12,000 mm Total height: 17,000 mm Technical documentation: Drawing Equipment Manhole/dome: On the top head Nameplate: Equipment: Lifting lugs Equipment Outlet: Available Last use: Beer tank

Condition: used, tank capacity: 30,000 l, Location: Bremen Condition: used Volume: 30,000 liters Design: horizontal Tank Support type: saddles Inner diameter: 3,100 mm Cylindrical length: 3,700 mm Overall length: 5,000 mm Technical data / Dimensions Bottom wall thickness: 3.7 mm Cylinder wall thickness: 3.0 mm Equipment: spray head Features Ljdexqcncjpfx Aabjhn Outlet (alternative entry): 65 mm Remarks: 2 loose bearing shells made of Fe (galvanized) each; 1 manway approx. 350 x 445 mm on the front bottom each; each with stronger dents in the cylinder Product-contacting material: V2A 1.4301 (AISI304)