Tte International Lda

Condition: used, functionality: fully functional, power: 119 kW (161.79 HP), operation weight: 1,300 kg, Year of construction: 1996, Müller MS-6 HFB (Krupp) sheet pile driver Year of manufacture: 1996 MS10 mounting Approx. 1,300 kg Centrifugal force: 464 kN Tensile force: 120 kN Frequency: 42.5 Hz Nwedpfx Asz Df Ipsb Uel Amplitude: 13.7 mm Drive power: 119 kW

Condition: used, functionality: fully functional, power: 42 kW (57.10 HP), fuel type: diesel, overall weight: 3,700 kg, Year of construction: 2021, operating hours: 1,084 h, Equipment: hydraulics, Gayk HRE 4000 WS hydraulic pile driver, year of manufacture 2021, in very good condition and ready for operation. USA import, fully customs-cleared in the EU and ready for operation in Europe. Recently fully serviced by Nasko in Dachau. The service cost was approximately EUR 4,000. Sale and invoicing via BRIC HOLDING SE. Communication possible in German and English. Inspection in Brandenburg is possible by prior appointment. Nwjdez Aiw Iopfx Ab Usl Subject to prior sale and errors. Sale exclusively to business customers/B2B.

Condition: used, functionality: fully functional, mileage: 4 km, power: 35 kW (47.59 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 60 l, color: green, overall weight: 5,200 kg, empty load weight: 5,200 kg, operation weight: 5,200 kg, mast type: duplex, Year of construction: 2023, operating hours: 950 h, platform length: 6,500 mm, transport length: 2,240 mm, transport width: 44,145 mm, transport height: 2,315 mm, Equipment: hammer hydraulics, hydraulics, rubber tracks, The MW1600-TX3 pile driver with Automatice Leveling, is a versatile and high-performance machine, designed for efficient pile installation in construction, solar farms, guardrails, and infrastructure projects. With its powerful hammer, flexible mast movement, and operator-focused design, the MW1600TX-3 provides superior control and precision, even in challenging terrains. Njdpfszwm Elox Ab Uewl 90-Degree Rotating Platform: The upper body platform with the mast can rotate 90 degrees, allowing for precise pile placement without repositioning the entire machine. 15-Degree Mast Tilting: The mast can tilt 15 degrees left and right, providing greater flexibility on uneven or sloped terrains.

Condition: used, functionality: fully functional, Used lifting device for raising and lowering manhole covers, fully functional. Nwsdpfozg Ub Hjx Ab Ujl

Condition: new, Year of construction: 2026, Drivetrain Make of engine: Parker Weights Empty weight: 3.000 kg Functional CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good Identification Reference number: 3 Other information Fits to following machines: 20-38TON Delivery terms: EXW Production country: KR Additional information Please contact Ö. Inalkac for more information We offer you new AJCE AVH30ST+ Side Grip type Vibro Hammer/ Sheetpile Driver/ SPUNDWAND RAMMGERÄTE/ Sheetpiledriver/ Damwand trilblok/ Martinete vibratorio/ Stroj za vibriranje pilota/ Bate estaca vibratória/ Wibracyjny kafar/Värähtelevä paalutuskone. AVH30ST+ is availbale with 3 types of changeable side clamps! AVAILABLE FROM NETHERLANDS WAREHOUSE! IN STOCK! DISPONIBLE DEPUIS ENTREPÔT PAYS-BAS! EN STOCK! ERHÄLTLICH IM NIEDERLANDE-LAGER! AUF LAGER! DISPONIBLE DESDE PAÍSES BAJOS ALMACÉN! EN STOCK! HOLLANDIA RAKTÁRBÓL ELÉRHETŐ! RAKTÁRON! DOSTUPNO IZ NIZOZEMSKOG SKLADIŠTA! NA LAGERU! Excavator: 20-38TON Weight: 2800 kg (without mounting cap) Working pressure: 200~ 250Bar Oil flow: 170-210 l/min Centrifugal Force : 640kN Nwjdpoy At Adjfx Ab Uel Frequency: 2700 rpm Eccentric moment: 6kgm AVH30ST+ is Robotic Pile Drivers enabling you to drive Sheet Piles, Steel Tubes,Timber Piles, H/I-Beams, solar pile, and therefore cheaper, safer, quicker than traditional Pile 40ST+ is Robotic Pile Drivers with Side Grip and bottom clamp picks up the piles and turn to desired position adjusting the tilt and start driving the pile . ADVANTAGES: ◉ Drive steel sheet piles, steel tubes, timber piles, H-I Beams. ◉ No manpower needed except excavator operator resulting less cost. ◉ Quick change of hands suiting your pile type and size. ◉ Special design resulting, no over heating problem.

Condition: new, Year of construction: 2026, Weights Empty weight: 3.700 kg Functional CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good Identification Reference number: 2 Other information Fits to following machines: 33-50ton Delivery terms: EXW Production country: KR Additional information Please contact Ö. Inalkac for more information We offer you new AJCE AVH40ST+ Side Grip type Vibro Hammer/ Sheetpile Driver/ SPUNDWAND RAMMGERÄTE/ Sheetpiledriver/ Damwand trilblok/ Martinete vibratorio/ Stroj za vibriranje pilota/ Bate estaca vibratória/ Wibracyjny kafar/Värähtelevä paalutuskone. AVH40ST+ is availbale with 3 types of changeable side clamps! AVAILABLE FROM NETHERLANDS WAREHOUSE! IN STOCK! DISPONIBLE DEPUIS ENTREPÔT PAYS-BAS! EN STOCK! ERHÄLTLICH IM NIEDERLANDE-LAGER! AUF LAGER! DISPONIBLE DESDE PAÍSES BAJOS ALMACÉN! EN STOCK! HOLLANDIA RAKTÁRBÓL ELÉRHETŐ! RAKTÁRON! DOSTUPNO IZ NIZOZEMSKOG SKLADIŠTA! NA LAGERU! Excavator: 33-50TON Weight: 3400 kg (without mounting cap) Working pressure: 250~ 270Bar Oil flow: 180-240 l/min Centrifugal Force : 1000kN Frequency: 2700 rpm Eccentric moment: 10 kgm AVH40ST+ is Robotic Pile Drivers enabling you to drive Sheet Piles, Steel Tubes,Timber Piles, H/I-Beams, solar pile, and therefore cheaper, safer, quicker than traditional Pile 40ST+ is Robotic Pile Drivers with Side Grip and bottom clamp picks up the piles and turn to desired position adjusting the tilt and start driving the pile . ADVANTAGES: ◉ Drive steel sheet piles, steel tubes, timber piles, H-I Beams. ◉ No manpower needed except excavator operator resulting less cost. Nwedpfsym Abvjx Ab Usl ◉ Quick change of hands suiting your pile type and size. ◉ Special design resulting, no over heating problem.

Condition: new, functionality: fully functional, mileage: 4 km, power: 45 kW (61.18 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 60 l, color: green, overall weight: 5,200 kg, empty load weight: 5,200 kg, operation weight: 5,200 kg, mast type: duplex, Year of construction: 2025, platform length: 6,500 mm, transport length: 2,240 mm, transport width: 44,145 mm, transport height: 2,315 mm, Equipment: hammer hydraulics, hydraulics, rubber tracks, The MW1600-TX5 pile driver is a versatile and high-performance machine, designed for efficient pile installation in construction, solar farms, guardrails, and infrastructure projects. With its powerful hammer, flexible mast movement, and operator-focused design, the MW1600TX-5 provides superior control and precision, even in challenging terrains. 90-Degree Rotating Platform: The upper body platform with the mast can rotate 90 degrees, allowing for precise pile placement without repositioning the entire machine. Nsdex Tg Nxepfx Ab Uowl 15-Degree Mast Tilting: The mast can tilt 15 degrees left and right, providing greater flexibility on uneven or sloped terrains.

Condition: new, functionality: fully functional, mileage: 4 km, power: 35 kW (47.59 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 60 l, color: green, overall weight: 4,800 kg, empty load weight: 4,800 kg, operation weight: 4,300 kg, mast type: duplex, Year of construction: 2025, platform length: 4,700 mm, transport length: 3,820 mm, transport width: 1,980 mm, transport height: 2,365 mm, Equipment: hammer hydraulics, hydraulics, rubber tracks, The MW1000-TX5 pile driver is a versatile and high-performance machine, designed for efficient pile installation in construction, solar farms, guardrails, and infrastructure projects. With its powerful hammer, flexible mast movement, and operator-focused design, the MW1000TX-5 provides superior control and precision, even in challenging terrains. Nedpfx Absx Tg Etj Uowl 90-Degree Rotating Platform: The upper body platform with the mast can rotate 90 degrees, allowing for precise pile placement without repositioning the entire machine. 15-Degree Mast Tilting: The mast can tilt 15 degrees left and right, providing greater flexibility on uneven or sloped terrains.

Condition: new, functionality: fully functional, mileage: 4 km, power: 35 kW (47.59 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 60 l, color: green, overall weight: 4,350 kg, empty load weight: 4,350 kg, operation weight: 4,300 kg, mast type: duplex, Year of construction: 2025, platform length: 4,500 mm, transport length: 2,950 mm, transport width: 2,280 mm, transport height: 2,550 mm, Equipment: hammer hydraulics, hydraulics, rubber tracks, The MW1000 pile driver is a high-performance, versatile machine designed for efficient and precise pile installation in various solar park, Nwsdpfsx Tf R Uox Ab Usl guardrail, vineyard, and construction applications.

Condition: new, functionality: fully functional, Year of construction: 2025, Postmaster MINI – Hydraulic Vibrating Block The Postmaster Mini can be mounted directly onto a machine, ranging from 1.5 to 3 tons, and drives posts into the ground up to 150 mm. Oil supply required is 30-40 l/min. The Postmaster is faster, quieter, and safer than conventional machines on the market. Njdpjw R Uqkefx Ab Uowl A unique clamping system holds the post in position and vibrates it into the ground with minimal damage. Thanks to this vibrating action, the Postmaster can also be used to extract posts from the ground. Ideal for both wooden and steel posts and especially suitable for installing solar parks. • Faster • Safer • Quieter • Removes posts from the ground • Minimal ground disturbance • Firmly secured The Mini is the smallest unit in the range and weighs just 160 kg. Its compact design and light weight make it safe for use on smaller excavators without compromising stability. This unit is an ideal partner for short runs, limited access, and rapid repairs. Also available in Midi and Maxi versions. Optional CW 05 top plate.

Condition: new, Year of construction: 2025, Weights Empty weight: 3.300 kg Functional CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good Identification Reference number: 4 Nsdpfx Asv Nhv Hjb Ujwl Other information Fits to following machines: 28-45TON Delivery terms: FOB Transport dimensions (LxWxH): 250015001,2 Production country: KR Additional information Please contact Ö. Inalkac for more information We offer you new AJCE AVH40ST Side Grip type Vibro Hammer/ Sheetpile Driver/ SPUNDWAND RAMMGERÄTE/ Sheetpiledriver/ Damwand trilblok/ Martinete vibratorio/ Stroj za vibriranje pilota/ Bate estaca vibratória/ Wibracyjny kafar/Värähtelevä paalutuskone. AVAILABLE FROM NETHERLANDS WAREHOUSE! IN STOCK! DISPONIBLE DEPUIS ENTREPÔT PAYS-BAS! EN STOCK! ERHÄLTLICH IM NIEDERLANDE-LAGER! AUF LAGER! DISPONIBLE DESDE PAÍSES BAJOS ALMACÉN! EN STOCK! HOLLANDIA RAKTÁRBÓL ELÉRHETŐ! RAKTÁRON! DOSTUPNO IZ NIZOZEMSKOG SKLADIŠTA! NA LAGERU! Excavator: 28-45TON Weight: 2800 kg Working pressure: 180~ 220Bar Oilflow: 200 l/min Centrifugal Force : 602 kN Frequency: 2700 rpm Eccentric moment: 6 kgm AVH40ST is Robotic Pile Drivers enabling you to drive Sheet Piles, Steel Tubes,Timber Piles, H,I Beams Cheaper , Solar Pile, Safer, Quicker than traditional Pile 40ST is Robotic Pile Drivers with Side Grip and bottom clamp picks up the piles and turn to desired position adjusting the tilt and start driving the pile . ADVANTAGES: ◉ Drive steel sheet piles, steel tubes, timber piles, H-I Beams. ◉ No manpower needed except excavator operator resulting less cost. ◉ Quick change of hands suiting your pile type and size. ◉ Special design resulting, no over heating problem.

Condition: used, Schulz hydraulic portal press type H26 buy used Machine data: max. pressure 1500 kN (150 tons) Main motor 55kW Cooling system motor 3kW Rexroth hydraulic system Nwodpfxsvxtrxe Ab Uel Tool plate dimensions 850x760 mm

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 1 h, De KH800 palenrammer van Maruzen is een krachtige hydraulische palenrammer ontworpen voor zware toepassingen zoals het plaatsen van grote houten palen, stalen pijpen, en andere hekwerk- of fundatietoepassingen. Deze palenrammer kan hydraulisch worden aangedreven door zowel benzine- als dieselkrachtbronnen zoals een graafmachine of shovel. De KH800 is uitgerust met een standaard adapter voor 150 mm ronde palen, optionele adapters zijn beschikbaar voor vangrail en stalen H-profielen om de veelzijdigheid te vergroten. De palenrammer werkt met hydraulische kracht en heeft een aanbevolen oliespecificatie van ISO VG32 of ISO VG46. De maximale slangdikte varieert afhankelijk van de olieflow, waarbij 3/8″ en 1/2″ slangen worden gebruikt voor respectievelijk 20-25 l/min en 25-35 l/min. Nwedpourir Rjfx Ab Usl Deze palenrammer wordt wereldwijd gebruikt voor uiteenlopende toepassingen, zoals wegenonderhoud, water- en elektriciteitsvoorzieningen, en spoorwegonderhoud, wat zijn veelzijdigheid en robuustheid benadrukt. Wij bieden de KH800 aan inclusief de KHL800 Geleider. De geleider vereenvoudigd het werken met de KH800 palenrammer en is in hoogte instelbaar doormiddel van een lier. Waardoor alle palen even diep de grond in worden geslagen. Mocht u geintresseerd zijn in de KH800 zonder de geleider of heeft u andere vragen, neem dan contact op met onze verkoopafdeling voor de mogelijkheden.

Condition: good (used), functionality: fully functional, fuel type: diesel, color: green, overall weight: 4,740 kg, Year of construction: 2007, machine/vehicle number: 180992, Product Description Used vibratory hammer machinery Manufactured by ICE Model ICE416 L 2007 MODEL max. operating pressure 350 bar Overall Weight 4740 KG Maximum frequency 1600 rpm Single clamp 490 KG More information Please contact Nsdpfx Asum N T Rjb Uswl VIJAY JPN Industrial Trading Pte Ltd

Condition: new, functionality: fully functional, Year of construction: 2024, This powerful, hydraulic pile rammer from Maruzen is a good choice if you are looking for a strong machine for striking steel and wooden piles. The Maruzen KH193 comes standard without impact piece. Easy and fast to use As many as 1920 blows per minute Operates on hydraulic power source such as a power pack or earth mover Can be used in wet conditions, even underwater Minimal service required; lubricate head every 50 hours and service every 500 hours. Hydraulic powerhouse The KH193 pile rammer is a perfect choice when ramming steel pipes, for example 60 x 40 mm or ø 60 mm, but it is also suitable for wooden piles up to a diameter of 110 mm. It weighs 20 kg and is more powerful than our gasoline rammers. This type of pole rammer offers many possibilities: Maruzen's hydraulic powerpack is intended for mobile purposes and is known for its easy way to use. This powerpack UH070 is matched with the AY01H horizontal auger, the OH01 hydraulic one-man auger and the KH193 pile rammer from Maruzen. This type of powerpack offers many possibilities in: Nedortqydopfx Ab Ujwl Assembly Fencing Foundation work Guardrail/boarding work Installing solar parks This hydraulic power pack is powered by a Honda GX200 gasoline engine and is delivered fully assembled, on a metal frame with large wheels. Benefits: Low fuel consumption; 1.6 Liters per hour at full power 20-25 Liters per minute Low noise level Light weight (40 Kg) Honda GX200 4 stroke engine (low emission) Very easy to use. EuroGate International offers affordable quality and service Maruzen is a reliable machine builder from Japan, for all kinds of hydraulic tools. The top brand offers excellent quality and service. Maruzen has been producing hydraulic machines since 1954.

Condition: new, Year of construction: 2025, Weights Empty weight: 1.800 kg Functional CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good Identification Reference number: 2 Other information Fits to following machines: 20-35ton Delivery terms: EXW Production country: KR Additional information Please contact Ö. Inalkac for more information We can offer you new excavator mounted Pile driver- Pile Hammer, Vibro Pile hammer, Vibratory pile driver, Vibratory Hammer. This model AJCE AVH30 fits on excavator class 20-35 ton. You don't need Power Pack, that will save you money! The weight is 1800kg. It will be delivered together with special extention boom to connect on the excavator. You can see it on the photos. Nwsdpfx Aoq Ixuvsb Uel We have also Side Grip type vibrohammers available. Contact us for details. We can ship worldwide. - Vibrofonceur Vibrohammer Piledriver Vibro högförare battipalo возач гомиле conductor de pila pilot hromady cölöpverő Rammbock haugesjåfør bate estaca sonetă ciocan vibro martelo vibro vibrohammer martillo vibratorio vibro marteau Vibrationshammer čekić vibro młot wibracyjny vibro plaktukas вибромолот вибро чук

Condition: new, Year of construction: 2026, Empty weight: 2.500 kg General condition: very good Technical condition: very good Visual appearance: very good Reference number: 3 Fits to following machines: 18-35ton Delivery terms: EXW Production country: KR Please contact Ö. Inalkac for more information We offer you new AJCE AVH30ST Side Grip type Vibro Hammer/ Sheetpile Driver/ SPUNDWAND RAMMGERÄTE/ Sheetpiledriver/ Damwand trilblok/ Martinete vibratorio/ Stroj za vibriranje pilota/ Bate estaca vibratória/ Wibracyjny kafar/Värähtelevä paalutuskone. AVAILABLE FROM NETHERLANDS WAREHOUSE! IN STOCK! DISPONIBLE DEPUIS ENTREPÔT PAYS-BAS! EN STOCK! ERHÄLTLICH IM NIEDERLANDE-LAGER! AUF LAGER! DISPONIBLE DESDE PAÍSES BAJOS ALMACÉN! EN STOCK! HOLLANDIA RAKTÁRBÓL ELÉRHETŐ! RAKTÁRON! DOSTUPNO IZ NIZOZEMSKOG SKLADIŠTA! NA LAGERU! Excavator: 18-30TON Weight: 2400 kg Nwsdpfoq Ixukox Ab Uol Working pressure: 180~ 200Bar Oilflow: 200 l/min Centrifugal Force : 450 kN Frequency: 2700 rpm Eccentric moment: 4 kgm AVH30ST is Robotic Pile Drivers enabling you to drive Sheet Piles, Steel Tubes,Timber Piles, H,I Beams Cheaper , Solar Pile, Safer, Quicker than traditional Pile 30ST is Robotic Pile Drivers with Side Grip and bottom clamp picks up the piles and turn to desired position adjusting the tilt and start driving the pile . ADVANTAGES: ◉ Drive steel sheet piles, steel tubes, timber piles, H-I Beams. ◉ No manpower needed except excavator operator resulting less cost. ◉ Quick change of hands suiting your pile type and size. ◉ Special design resulting, no over heating problem.

Condition: new, Year of construction: 2026, Weights Empty weight: 2.500 kg Functional CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good Identification Reference number: 2 Other information Fits to following machines: 18-38ton Nwedpfx Aboq Ixr Es Uel Delivery terms: EXW Production country: KR Additional information Please contact Ö. Inalkac for more information We offer you new AJCE AVH30TT Tilting type Vibro Hammer/ Sheetpile Driver/ SPUNDWAND RAMMGERÄTE/ Sheetpiledriver/ Damwand trilblok/ Martinete vibratorio/ Stroj za vibriranje pilota/ Bate estaca vibratória/ Wibracyjny kafar/Värähtelevä paalutuskone. AVAILABLE FROM NETHERLANDS WAREHOUSE! IN STOCK! DISPONIBLE DEPUIS ENTREPÔT PAYS-BAS! EN STOCK! ERHÄLTLICH IM NIEDERLANDE-LAGER! AUF LAGER! DISPONIBLE DESDE PAÍSES BAJOS ALMACÉN! EN STOCK! HOLLANDIA RAKTÁRBÓL ELÉRHETŐ! RAKTÁRON! DOSTUPNO IZ NIZOZEMSKOG SKLADIŠTA! NA LAGERU! Excavator: 18-30TON Weight: 1950 kg Working pressure: 180~ 200Bar Oilflow: 200 l/min Centrifugal Force : 450 kN Frequency: 2700 rpm Eccentric moment: 4 kgm AVH30TT is Robotic Pile Drivers enabling you to drive Sheet Piles, Steel Tubes, HI Beams Cheaper , Solar Pile, Safer, Quicker than traditional Pile 30TT is Robotic Pile Drivers with Tilting option and bottom clamp picks up the piles and turn to desired position adjusting the tilt and start driving the pile .

Condition: new, Year of construction: 2026, Driving extra long poles, solar system poles and large diameter poles With the new SolarPro post driver from Rhino, EuroGate International is launching a completely new way of driving posts on the market. This professional attachment, suitable for the most common earth-moving machines, drives a pile with a maximum length of 450 cm into the ground with about 1000 strokes per minute. With a force of up to 1,085 joules, posts up to a maximum diameter of 38 cm are no problem for this powerhouse. Piles are driven vertically into the ground at great speed. These machines are very suitable for solar installations, fencing and road construction. The possibilities are endless. A tough project, even in difficult terrain? No problem for the Rhino SolarPro. Designed to accelerate the installation of solar farms. The Rhino SolarPro is ‘X and Y axis adjustable’ to ensure accurate, fast and perpendicular driven piles for solar parks and fencing, among other things, regardless of the soil conditions of the construction site or the terrain. This professional construction attachment for construction equipment is designed and built in the USA with the highest quality materials. The SolarPro has a CE certificate and is built according to the standards for the European market. Features and benefits Suitable for posts up to 38 cm in diameter with a maximum length of 450 cm. The hammer and guide hold the post in place for efficient hammering of the post. Uses the existing hydraulic drive of the earth-moving machine and the use of the attachment function eliminates the need for an expensive self-propelled pile driver. This allows you to complete your project on time and within budget. The Rhino SolarPro is equipped with a universal mounting plate for the most common excavators and earth-moving machines. Equipped with modern, Furukawa FX hydraulic hammer Nwodpfx Aboia N Eqe Usl Designed for efficient pile driving, reliable hammer with a long service life. Powerful 800 ft. lbs. (1,085 Joules) impact energy per stroke (approximately 1,000 strokes/min.) Features a new and improved piston (larger diameter and longer stroke) increases speed – provides more impact energy.Using the monobloc design, this machine requires less maintenance with only two moving parts. Pole pull function included The SolarPro pile driver offers an integrated pile driver with vibration aid for the toughest applications. By using this function you can remove a knocked-out post in no time at all.

Year of construction: 2006, operating hours: 13,700 h, condition: used, Field of application: Construction Please contact Mohamad Fattah Ahmad for more information Nwedpfx Abeh Ty Ako Usl LIEBHERR LRB 155 + Juntan Hammer HHK 5/7 More details on serious require, current location Germany Yard M2 GmbH Wilhelmshaven Juntan Hammer HHK 5/7 Year. 2002

Year of construction: 2008, operating hours: 9,750 h, condition: used, Field of application: Construction Please contact Mohamad Fattah Ahmad for more information Piling rig Njdpfxeh Tyzxj Ab Uowl Upper carriage : Sennebogen BS 80 R Engine : CAT C 18 570 kW Optional : Vibrator MR 125 V, KDK 232 S, DKS 100/ 200 Additional : Systems Vibrator, Kelly and CFA drilling central lubrication, air compressor , prepration CSM The machine is in very good working condition!

Year of construction: 2008, condition: used, Field of application: Construction Nwsdpfx Aeh Tyzqsb Uel Please contact Mohamad Fattah Ahmad for more information Upper carriage Sennebogen BS 60 R CAT C 18 570 kW Twin turbo central lubrication optional with vibrator MR 100 or MR 125 V B Tonic for Vibrator / FOW Drilling / SCM and SMW Mixing Good working condition

Year of construction: 2010, operating hours: 9,500 h, condition: used, Field of application: Construction Please contact Mohamad Fattah Ahmad for more information Nedjh Tyzmspfx Ab Uswl Year of Man. 2010 Working hours 9500 Base carrier BAUER BT 45 Attachments : Vibrator MR 70 V general overhauled, Pre drilling rotary ABI MDBA 3500 Engine CAT313 kW Aux winch Air condiion Good working condition !

Year of construction: 2006, operating hours: 2,500 h, condition: used, Field of application: Construction Nsdpfx Aeh Tyzijb Uewl Please contact Mohamad Fattah Ahmad for more information Vibrator MR 100 V for RTG Piling rigs inclusive clamp MRZ 105

Year of construction: 2010, operating hours: 13,500 h, condition: used, Field of application: Construction Please contact Mohamad Fattah Ahmad for more information ABI TM 14/17 V Year 2010 CAT Engine / 470 kW Base carrier : Sennebogen SR 35 T Aux Winch Vibrator MRZV 24VV Pre drilling rotary available Nwjdpfx Abjh Tyylj Usl Good working condition!