POS Rolf Helle GmbH

Condition: used, Year of construction: 2002, Feeler FV-800A CNC Vertical Machining Centre With Heidenhain Control Codozy Ipdepfx Aptsrg Table Dimension 950 x 425mm (3 'T' Slots). Maximum Table Load 500kg. Axis Travel 'X'=800mm, 'Y'=450mm, 'Z'=505mm. Rapid Traverse 'X'=18m/min, 'Y'=18m/min, 'Z'=15m/min. Maximum Spindle Speed 9,000rpm (10kW Motor). Spindle Taper BT40. 24 Position ATC. S/No. VG984 (2002). With Coolant System, Habor HBO-250PTSB-86 Oil Cooler Unit, Signal Tower, Quantity Of Assorted BT40 Toolholders, Wash Gun & Handwheel. Weight 4,850kg.

Condition: like new (used), Year of construction: 2016, operating hours: 3,641 h, functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 35 m/min, feed rate Y-axis: 35 m/min, feed rate Z-axis: 35 m/min, controller manufacturer: Heidenhain, controller model: TNC 640, workpiece weight (max.): 2,000 kg, table width: 700 mm, table length: 1,070 mm, table load: 2,000 kg, overall weight: 10,000 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 3,641 h, spindle motor power: 20,000 W, spindle nose: HSK-A63, number of spindles: 1, number of slots in tool magazine: 38, Equipment: documentation/manual, This HERMLE C400 is in like-new condition and has seen very little use, with only 3641 spindle hours. The machine comes from a repair/prototype workshop and was primarily used to machine plastics and aluminum. Crodpezyq Ebefx Aptsg The machine is located in our showroom and can be inspected while running! Additional options & accessories: - Air through the spindle. - Heidenhain TS460 measuring probe. - Electronic handwheel. - Approx. 20 HSK-A63 tool holders (in the tool changer). - Manual cabinet roof. - Preparation for mist extraction system. - Coolant gun. - Original HERMLE + Heidenhain documentation. Weight & dimensions: approx. 10,000 kg

Condition: used, Year of construction: 2012, operating hours: 25,742 h, functionality: fully functional, coolant supply: 20 bar, number of slots in tool magazine: 30, Equipment: chip conveyor, Used 3-axis machining center with Heidenhain control. Currently still in operation. Will be replaced by a larger machine. Inspection possible by appointment. Available at the end of 2026. Codpfxszyl Nnj Aptjrg

Condition: used, Year of construction: 1998, functionality: fully functional, Equipment: chip conveyor, documentation/manual, Hermle 3-Axis Machining Center Crjdpfx Apezxpp Aetsg Type C 600 V Year 1998 CNC Heidenhain TNC

Condition: good (used), DMG DMC 835V including belt filter system Siemens 840D control system Year of manufacture 2007 Operating hours approx. 33,589 h Spindle hours approx. 13,075 h Machine number 15415023524 Spindle speed 10,000 rpm Travel distances: Z 510 mm Y 510 mm X 835 mm Rapid traverse rate m/min: 30 Tool holder SK 40 Credpfx Ajzxgp Teptjg Tool magazine 30 positions Table load 800 kg Table dimensions 1000 x 560 mm Overall dimensions incl. chip conveyor approx. 4300 x 2500 mm (footprint) Machine weight approx. 4200 kg Coolant system with belt filter system, 25 bar Blum laser 3D probe Heidenhain TS640 The machine is in good condition and operates perfectly. Maintenance was performed approximately 2 months ago (€3,500). The machine will be sold without tools and vices.

Condition: good (used), EMCO E-900 CNC vertical machining center Technical details: Travel X/Y/Z: 900mm/500mm/500mm, Table dimensions X/Y: 1000mm/520mm, Max. table load: 800kg, Spindle speed: 10000rpm, Spindle power: 11kW, Tool holder type: SK40, Rapid traverse: 24m/min. Machine dimensions X/Y/Z: approx. 2600mm/2450mm/2950mm, Weight: approx. 4800kg, Control: Siemens Sinumerik 810D Shopmill Accessories/options: - tool holders SK40 - documentations - coolant tank Cjdpfxszxc Npo Apterg Under power in our warehouse, inspection is available at anytime. Videos are vailable upon request!

Condition: excellent (used), Year of construction: 2010, Data: XYZ: 600/400/460 mm Spindle speed: 10,000 rpm Heidenhain TNC 620 control unit Spindle: SK 40 Internal coolant system: 20 bar CNC Nikken / 4-axis, D 200 mm Cedezw T R Uspfx Apterg Oil mist extraction system Chip conveyor

Condition: good (used), Year of construction: 2008, Ref. -No.: 10660 Manufacturer: DECKEL MAHO Type: DMC 835 V Year of construction: 2008 Type of control: CNC Control: Siemens 840D mit Shopmill Storage location: Halberstadt Country of origin: Germany X-Travel: 835 mm Y-Travel: 510 mm Z-Travel: 510 mm Main spindle drive power: 14 kW Table Dimensions (Lengthxwidth): 1000 x 560 mm Table Load: 800 kg Tool Taper: SK 40 Numbers Of Tools In Magazin: 20 Turning Speeds: 10000 RPM Crsdpfx Apezw Txfjteg Max. Workpiece Weight: 4,5 t Further information: - Chip conveyor - Handwheel The machine can be inspected while powered on by prior arrangement.

Condition: good (used), Year of construction: 2012, Ref. -No.: 10659 Manufacturer: DECKEL MAHO Type: DMC 835V Year of construction: 2012 Type of control: CNC Control: Haidenhein iTNC 530 Storage location: Halberstadt Country of origin: Germany Csdpfxszw Tw Ue Apterg Machine-No.: 1541XXX X-Travel: 835 mm Y-Travel: 510 mm Z-Travel: 510 mm Number of T-slots: 5 Max. Tool Weight: 6 kg Max. Tool Length: 250 mm Max. Tool Diameter: 80 mm Tool change time: 1,6 s T - groove width: 14 mm T - slot spacing: 100 mm Tool Taper: SK40 Numbers Of Tools In Magazin: 30 Spindle Speed: 12000 RPM Max. Torque: 130 / 87 Nm Turning Speed Range - Stepless: 30 mm / min Total Power Requirement: 35 kW Dimensions Of The Machine Ca.: 4,5 x 3,5 x 2,7 m Weight Of The Machine Ca.: 5 t Changeover time chip - chip: 6 sec Feed rate: 1 - 20.000 (X / Y / Z) High pressure cooling: 20 bar Further information: The machine can be inspected while powered on by prior arrangement.

Condition: excellent (used), Year of construction: 2012, operating hours: 6,000 h, functionality: fully functional, machine/vehicle number: 21534, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, workpiece weight (max.): 2,000 kg, table width: 700 mm, table length: 1,070 mm, overall weight: 12,500 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 5,000 h, spindle motor power: 15,000 W, number of slots in tool magazine: 38, Equipment: chip conveyor, documentation/manual, Very good condition, used for light milling. High-pressure coolant flush through the center of the tool, 80 bar. HSK63A tool holder. Blum tool breakage detection. iTNC530 control system. Includes two vices and a pneumatic clamping device ITS100/P. Crjdpfx Ajzw Rl Asptjg Direct sale to end-user only. Price includes loading at the seller's location: W-Technology s.r.o. Polní 8 79201 Bruntál Czech Republic

Condition: used, Year of construction: 1991, Mori Seiki MV-40B Year of manufacture: 1991 Cedpfjzwt Eljx Aptorg Control system: Fanuc/Mitsubishi Travel distances X/Y/Z: 800x400x500 Machine weight: 6050 kg Condition: Still connected to power, fully functional.

Condition: ready for operation (used), Year of construction: 2011, operating hours: 12,946 h, functionality: fully functional, travel distance X-axis: 935 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 650 mm, controller model: Heidenhain iTNC 530 HSCI, spindle speed (max.): 15,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 935 mm Travel range Y-axis: 850 mm Travel range Z-axis: 650 mm Number of axes: 3 Crjdpozwn Etjfx Aptog Table length: 1,200 mm Table width: 850 mm Max. table load: 2,000 kg Spindle connection: HSK-A63 Spindle speed: 15,000 rpm Tool changer: 30-position Rapid traverse: 40 m/min Feed rate: 40,000 mm/min MACHINE DETAILS Control system: Heidenhain iTNC 530 HSCI Internal cooling: 40 bar / 23 liters/min Operating hours: 36,420 h Spindle hours: 12,946 h EQUIPMENT Chip conveyor

Condition: ready for operation (used), Year of construction: 1995, travel distance X-axis: 800 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 505 mm, controller manufacturer: MITSUBISHI, controller model: Meldas 520AMR, spindle speed (max.): 6,000 rpm, number of axes: 3, This vertical machining centre FEELER FV-800A was manufactured in 1995 and is equipped with a Mitsubishi Meldas 520AMR control system. The machine features a 20-position tool magazine. Consider the opportunity to buy this machine. Contact us for further details. Extra Information Tool magazine with 20 positions. The machine includes no tools (BT40) or clamping devices./ Table working area: 950 × 505 mm/ Space requirements: L 2300 × W 3960 (open control cabinet and control panel) × H 2525 mm/ Max. feed: X-18 m/min / Y-18 m/min / Z-15 m/min/ Spindle mount: BT 40/ Max. speed: 6000 rpm/ Tool magazine: 20 positions/ Max. tool diameter: 80 mm/ Max. tool length: 250 mm/ Cjdpjzwcfbsfx Aptsrg Weight: approx. 5,000 kg/ Control system: Mitsubishi Meldas 520AMR/ Scope of delivery includes only the machine, without tools (BT40) or clamping devices./ machine hours 6,805 h

Condition: good (used), Year of construction: 1996, functionality: fully functional, Work area: 800x600x500 Rapid traverse rate: 30 m/min Codpfszv Syfex Apterg Spindle speed: 15000 RPM, SK40 NC rotary table, diameter = 280 mm Electronic handwheel module Electrical thermal expansion compensation Ethernet interface, TNC 426/430 Measuring probe system, SK40, Renishaw Chip conveyor without chip cart Enclosed cabin roof section Air blow-off device, C800 The spindle was replaced in May 2018 with a total operating time of 25,185 hours. The current operating time is 31,083 hours. This means that the spindle has been in operation for 5,898 hours since its replacement.

Condition: ready for operation (used), Year of construction: 2003, Make: CHIRON Type of machine: MILL 800 Year of manufacture: 2003 Control system: Siemens SINUMERIK 840D Crodpszvyv Ijfx Aptog Tool holder: SK 40 x-travel: 800 mm y-travel: 500 mm z-travel: 550 mm Speed range: 12.000 U/min Table dimensions: 1.400 × 550 mm Number of tools in the magazine: 24 Plätze Internal coolant supply: 40 Bar

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 900 mm, travel distance Y-axis: 590 mm, travel distance Z-axis: 520 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, total height: 3,330 mm, table load: 400 kg, overall weight: 11,800 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 33,000 W, tool weight: 6,500 g, number of axes: 5, This 5-axis KOVOSVIT MAS MCV 1000 Speed 5AX was manufactured in 2011. It features a spindle speed range of 20-12,000 rpm and a spindle drive power of 33/45 kW. The machine can handle a maximum tool weight of 6.5 kg and includes a 30-tool magazine. With a table load capacity of 400 kg and dimensions of 5145 x 3665 x 3330mm, it's ideal for complex machining tasks. If you are looking to get high-quality milling capabilities consider the KOVOSVIT MAS MCV 1000 Speed 5AX machine we have for sale. Contact us for more information. Additional equipment • Including full tooling Crodpjzvv D Iefx Apteg Machine Benefits Technical Machine Benefits • Feed range (x, y, z): 1 - 15000 mm/min • Table clamping surface: Ø 520 mm • C-axis rotation: 360° • A-axis tilt: ± 110° • Max. Table speed: 20 rpm • Max. Torque (s1/s6): 157/215 nm • Total power input: 55 kva Extra Information Machine still under powerMachine spindle hours are below 9000h. The machine was used mainly in tool mold making and small-batch custom production. It was continuously maintained and serviced as needed. Dimensions Machine Depth 5145 mm

Condition: ready for operation (used), Year of construction: 2012, travel distance X-axis: 810 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 500 mm, controller manufacturer: SIEMENS, controller model: 828D, spindle speed (max.): 10,000 rpm, This Saeilo Contur MMV 810 S vertical machine center, manufactured in 2012, features a Siemens 828D control system with an electronic handwheel for precise operation. It has 6224 duty cycle hours and 1821 spindle hours. The traverse paths are X = 810mm, Y = 400mm, Z = 500mm, with a 900 x 400mm table featuring 3 T14 slots. It includes a double arm tool changer with 20 slots, a BT-40 tool holder, and a high-performance spindle reaching 10000 rpm with oil cooling and a 20 bar internal coolant supply. Contact us for more information. Additional equipment • Double arm tool changer with 20 places • Tool holder: BT- 40 • Spindle oil cooling // Internal coolant supply 20bar • Disc skimmer in coolant tank Crodpjzvvvkjfx Aptjg • Blast air cooling through spindle or from outside • Coolant gun • Spiral chip conveyor • Central lubrication of the guides Machine Benefits Technical Machine Benefits • Duty cycle machine: 6224 hours, duty cycle spindle: 1821 hours • Table clamping surface: 900 x 400mm with 3 t14 slots Extra Information Machine still under power

Condition: used, Year of construction: 2004, operating hours: 28,082 h, travel distance X-axis: 800 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 520 mm, controller model: Siemens 840 D, spindle speed (max.): 13,000 rpm, The control unit (PCU 50) was replaced in March 2024! The machine spindle was replaced at approximately 5,500 operating hours! Tools are included in the offer! TECHNICAL DETAILS Travel range X-axis: 800 mm Travel range Y-axis: 620 mm Travel range Z-axis: 520 mm Spindle speed: 13,000 rpm Number of tool positions in the tool magazine: 30 MACHINE DETAILS Control unit: Siemens 840 D Operating hours Control unit operating hours: 60,150 h Machine operating hours: 56,860 h Spindle operating hours: 28,082 h Spindle replacement at: 5,500 h EQUIPMENT Tools 4th axis Hofmann RW/NC160 Cedpfjzvl Tfex Aptsrg Oil mist extraction system Strip filter system with internal cooling 20 bar with double switching filter Documentation Hedelius + Siemens Sinumerik Infrared probe Renishaw Note: The sale does not include the milling attachments on the rear panel of the machine. Since the machine has been demonstrated several times, the machine operating hours may vary slightly.

Condition: used, Year of construction: 2008, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 510 mm, total height: 3,250 mm, total length: 3,545 mm, total width: 3,970 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 48, Equipment: chip conveyor, For sale is a high-precision Hurco VTXU vertical 5-axis machining center with a swivel rotary table. The machine is in very good cosmetic condition. Technical data: Year of manufacture: July 2008 Control: WinMax (dual-screen) Travel distances X / Y / Z: 800 x 700 x 510 mm Swivel range A-axis (tilting axis): -30° to +110° Rotation range C-axis (rotary table): 360° (full range) Rotary table diameter: 610 mm Table load: max. 400 kg Distance spindle nose - table: 150 - 660 mm Max. spindle speed: 12,000 rpm Spindle power: 18 kW Torque: 237 Nm Tool holder: SK 40 Magazine capacity: 48 tools Credszvd U Ujpfx Aptjg Max. tool length: 280 mm Max. tool weight: 7 kg Tool change time chip-to-chip: 8 sec. Voltage: 400 V / 50 Hz Connected load: 55 kVA Compressed air requirement: 6 - 8 bar Machine dimensions (W x D x H): 3,545 x 3,970 x 3,250 mm Upon request, transport and loading can be arranged throughout Europe for an additional fee. Prices plus VAT. Inspection possible by appointment. Contact us, our team will be happy to assist you. Trade-in or exchange possible! Machine buying and selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit our website.

Condition: ready for operation (used), Year of construction: 2018, operating hours: 6,597 h, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, controller manufacturer: SIEMENS, table load: 1,000 kg, spindle speed (max.): 12,000 rpm, number of axes: 5, This 5-axis Alzmetall GS 1000/5-FDT was manufactured in 2018. It features a spindle speed of 12,000 RPM and a tool capacity of 125-126 positions, utilizing HSK 63 A and T holders for versatile operations. The machine includes a robust table load capacity of 1,000 kg and a high-pressure coolant system. If you are looking to get high-quality machining capabilities, consider the Alzmetall GS 1000/5-FDT vertical machining centre we have for sale. Contact us for further details. Codszvb E Depfx Aptjrg - Tool Positions / Capacity: 125 - 126 tool positions- Tool Holder / Taper: HSK 63 A and T (T-holder with turning function & spindle orientation for full turn-mill operations)- Cooling System: 70 bar Internal High-Pressure Coolant, External Coolant, Internal & External Air Cooling- Coolant Tank Volume: 1,000 L, equipped with a paper belt filter and a safety filter in the coolant line upstream of the spindle.- Axis Configuration: 5-Axis (Torque motors in A and C axes for simultaneous milling/turning)- Operating Hours: Approx. 6,000 hours- Automation & Interface: Media supply (hydraulics & air), automatic door, prepared for automation, interface installed (robot missing)- Spindle Protection: Double spindle protection- Auxiliary Equipment: Chip conveyor, extraction unit (LTA Air Cleaning), external cooling/chiller unit- Electrical Input: Reduced from 60 to 30- Defects / Known Issues: Cracks in the front view windows due to previous tool breakage; tool chain ribbon has 1 fiber from a flat ribbed belt wrapped around it, causing stiffness and occasional emergency stops (E-stops)

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 860 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 630 mm, controller manufacturer: FANUC, table load: 500 kg, overall weight: 6,600 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 11,000 W, number of slots in tool magazine: 24, number of axes: 4, This 4-axis HARTFORD MVP-8A was manufactured in 2004. It features impressive travels of 860 mm in the X-axis, 530 mm in the Y-axis, and 630 mm in the Z-axis. The machine includes a robust table size of 1000 x 560 mm with a load capacity of 500 kg, and a maximum spindle speed of 10,000 rpm. If you are looking to get high-quality machining capabilities, consider the HARTFORD MVP-8A vertical machining centre we have for sale. Contact us for further details. • Distance table–spindle face: max. 705 mm • Table dimensions: 1000 × 560 mm Cjdpfozvbynex Apterg • Rapid traverse (X/Y/Z): 24 / 24 / 24 m/min (linear guides) • Automatic tool changer (ATC): 24 positions, arm-type • Control system: Fanuc 21i (black and white display) + Hartrol AI100 Additional equipment • 4th axis rotary table Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 800 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 630 mm, controller manufacturer: FANUC, controller model: 0l-MC, overall weight: 5,800 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 10,000 W, number of slots in tool magazine: 24, number of axes: 3, This 3-axis HARTFORD PRO-800A was manufactured in 2005. It features an X-axis travel of 800 mm, Y-axis travel of 510 mm, and Z-axis travel of 630 mm. The machine is equipped with a spindle speed of 8,000 rpm and a tool changer with 24 positions. If you are looking to get high-quality machining capabilities, consider the HARTFORD PRO-800A vertical machining centre we have for sale. Contact us for further details. • Rapid traverse (X/Y): 30 m/min • Rapid traverse (Z): 24 m/min • Working feed: 1–10,000 mm/min Crodjzu S Rhopfx Aptog • Table size: 900 x 470 mm • Spindle power: 7.5 kW / 10 kW • Spindle-to-table distance: 75–705 mm • Tool changer: 24 positions • Condition: Under power, fully functional Additional equipment • Internal cabin flushing (chip flush) • Chip conveyor belt Technical Specification Taper Size BT 40

Condition: used, Year of construction: 2000, 2 x Mikron VCP 800 milling machines, manufactured in 1999 and 2000. Credszu Ivajpfx Apteg

Condition: good (used), Year of construction: 2010, 2010 Hermle C50 U MT Dynamic 5 Axis Vertical Machining Centre With Turning Capability & Dual Siemens 840D Controls Table Dimension Ø1,000mm (16 16mm H7 'T' Slots). Maximum Table Load 2,000kg (1,000kg Turning). Maximum Component Dimension Ø1,000 x 810mm High. Axis Travel 'X'=1,000mm, 'Y'=1,100mm, 'Z'=750mm , 'A'=+100°/-130°, 'C'=360°. Rapid Traverse 'X'60m/min, 'Y'=60m/min, 'Z'=65m/min. Maximum Spindle Speed 12,000rpm (56kW Motor). Maximum Turning Spindle Speed 500rpm. Spindle Taper HSK A100. 84 Position ATC (Additional ZM 42 Magazine). Maximum Tool Ø250mm, Maximum Tool Length 430mm, Maximum Tool Weight 30kg. Chip To Chip Tool Change Time 7s. S/No. 19871 (2010). Machine Hours 89,860.9 , Drive Hours = 74,916.2, Spindle Hours 10,585.7, Work Spindle Hours 566.0 (New Spindle Installed 2023). Credpfx Aezt Nywspteg With Knoll KF 400 Through Coolant Paper Filtration System, Knoll S-1 Chip Conveyor, Swarf Bin, Handte Mist Extraction Unit, Hyfra Pedia VWK70-DE-S Chiller Unit, Brand New Blum Laser Toolsetter, Quantity Of Tooling In ATC, Renishaw MP40-2 Spindle Probe, Visiport TK2 Spin Window, Blum Reference Tool In Carry Case, Heidenhain Calibration Kit In Carry Case, Automatic Doors, Retractable roof For Loading & Technical Manuals. Weight 21,500kg. Technical Agreement/Specifications Are Located In A Folder Inside Control Panel. Machine Is A Clean & Very Good Condition, Only Issues Are Internal Lights Not Working (No Faults As They Were Repaired Last Month Through Kingsbury). We Run Fusion 360 Through The Machine.

Condition: like new (used), Year of construction: 2015, operating hours: 5,476 h, NIKKEI VH 1010 MACHINING CENTER YEAR OF FIRST INSTALLATION: 2015 TABLE DIMENSIONS: 1,200 mm x 550 mm MAXIMUM ALLOWABLE WEIGHT: 850 kg CNC FANUC Series 0i – MD DISTANCE FROM SPINDLE NOSE TO TABLE: 650 mm RAPID TRAVERSE RATES: 24 meters/min TRAVELS: Cedpfx Apjztqpystsrg X: 1010 mm Y: 500 mm Z: 520 mm B: (4TH AXIS, LEHMANN BRAND): 360° SPINDLE SPEED: 12,000 RPM TAPER: ISO 40 INTERNAL COOLANT / COOLANT THROUGH SPINDLE / HIGH PRESSURE WEIGHT: 6,000 kg CHIP CONVEYOR NO. 2 PRECISION CHUCKS 4TH AXIS FUME / DUST EXHAUST SYSTEM MACHINE IN EXCELLENT CONDITION