Prinz Anlagenbau

Condition: good (used), Year of construction: 1991, max. cutting length 510 mm saw blade diameter 450 mm Isdexpi Ugjpfx Aabsbc 4 kW motor roller tables with stop on both sides, each 2 m long

Condition: like new (used), Year of construction: 2013, functionality: fully functional, Holtec package crosscut saw with mobile saw HF 121. Excellent condition. Located in Meschede. Can be dismantled and loaded by us. Ibodpfxjxph Uxo Aabjc

Condition: new, Year of construction: 2025, functionality: fully functional, cutting height (max.): 1,300 mm, cutting width (max.): 1,300 mm, overall weight: 9,000 kg, workpiece weight (max.): 8,000 kg, saw drive: 11,000 W, The OBS1300 bundle cutting saw has been developed to optimize production in terms of time and efficiency when formatting material to the desired length. The presented machine is available immediately—viewings are welcome. Technical specifications: • Maximum bundle dimensions (width/height): 1300 x 1300 mm • Minimum bundle dimensions (width/height): 800 x 800 mm (hydraulic clamp operating limit—smaller bundles can also be cut) • Additional equipment enables cutting bundles with a minimum length of 600 mm • Maximum cut-off bundle length: 3000 mm • Maximum feed bundle length: 6000 mm • Maximum bundle weight: 8,000 kg • Cutting accuracy: +/- 2 mm • Dedicated guide lubrication unit • GB TITANIUM cutting guide (rigid and robust, milled from a single steel block. Backward compatible with STHIL guides*) • STHIL RM404 cutting chain • 11 kW WEG guide drive motor • Fast measurement system with absolute encoder (retains position memory after power loss) and 0.2 mm positioning accuracy • Innovative strapping unit with intelligent system determining strapping point based on preset cut lengths • System of three sets of hydraulic clamps • Hydraulic system built using PONAR components • Crosswise infeed conveyor for loading bundles onto the machine • Intelligent unloading system with crosswise chain conveyor • Two pairs of tilting rollers (hydraulic) allowing large offcuts to freely fall onto the conveyor • TA DRIVE geared motors • HIWIN linear guides with increased load capacity • YHY Japan bearings • YASKAWA inverters and servomotor • 21-inch touchscreen operator panel • SIEMENS PLC controller (with remote access system) • Safety system and SICK brand sensors Warranty: Ijdpfx Asxn Rt Ueabobc 12-month warranty. Service response time: 24 hours. Spare parts and consumables warehouse. Machine supplied with: • Operating manual • Declarations of conformity • Warranty card • Electrical diagrams • Hydraulic diagrams

Condition: used, Year of construction: 2023, DOUBLE GLASS BEAD SAW TRF 527 VIS CE 1 pc DOUBLE GLASS BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double miter saw for the simultaneous cutting of two glass beads positioned one above the other. The right saw unit is fixed, adjustment of the left unit is via the set cutting length can be read off a digital display. The units have supports that allow two glass beads to be cut simultaneously. The upper support can be removed for cutting larger cross-sections. After the cutting process is completed, the pneumatic clamping cylinders automatically swing to the side to simplify loading and unloading of the machine. STANDARD EQUIPMENT • Fixed unit on the right • Digital dimension display • Pressure switch • 2 HM-tipped saw blades • Electrical system with motor brake, undervoltage release, motor protection switch • Pressure switch • Tool set • Guards with horizontal clamping devices, pivoting • Two-hand control • Belt drive • Pneumatic unit lift • Middle support TECHNICAL DATA • Motor power 2 x 1.2 kW • Saw blade diameter Ø 220 mm • Max. cutting height without support 80 mm • Max. cutting width at 90 degrees 55 mm • Max. cutting width at 45 degrees 40 mm • Max. cutting length 2800 mm (optional 4000 mm) • Min. cutting length 158 mm • Weight 217 kg • Space requirement (standard equipment) 3000 x 850 mm Extended cutting capacity 1 pc Maximum cutting length • 4000 mm Star stop 4 positions 1 pc set 2 mechanical stops for adjusting up to 4 intermediate angles. Additional center support. 1 adjustment for rebated profiles. 1 adjustment for rebated profiles as per drawing: - Attachment to the clamping devices to compensate for the profile inclination - Allowances on the rear stops of the units and the center support. The sketch below shows (in green) a beveled presser that follows the inclined profile and presses it against the allowance on the stop (shown in red). Storage location: Garbsen Iedpfx Aexnlgceabjbc

Condition: used, cutting width max. 250 mm Cutting height max. 80 mm Saw blade diameter 400 mm Motor output 3,0 kW turning speeds 2800 U/min Required air-pressure 6-8 bar work height max. 900 +-20 mm mm Dimensions (L/W/H) 530x869x1217 mm SALVAMAC Legend 400 – The semi-automatic chop saw ----- - Maximum cutting area: 220x80/ 250x50 mm. (When sawing stacked boards, note: rear stop height 100 mm) The structure is made entirely of sturdy, thick-walled steel, which is painted throughout and reinforced. A solid one Floor mounting system is equipped with flanged steel feet, to ensure secure attachment. The two-hand control is ergonomically positioned for comfort and efficient operation. Motor power of the saw motor 3.0 kW. The cutting speed is adjustable via a pneumatic controller, to enable precise adjustment. The system also has a Shock-absorbing system to minimize vibrations and ensure worker safety to improve. HM circular saw blade, diameter 400 mm, Z=96. The upper pressure hood has an electro-pneumatic control for precise operation. The pressure hood movement system is innovative Ball bearings operated with double dust protection and automatic lubrication system, which ensures smooth functionality. In addition, the electrical system is compliant with CE standards. CE models are standard with at least 1 meter long inlets and outlets (undriven rollers or flat table) to facilitate operation optimize and meet security standards. Technical data: ----- Saw cross section max. 220x80/ 250x50 mm Saw blade motor power: 3.0 kW Saw blade diameter: 400 mm Saw blade type: HM Z=96 Saw blade rotation speed: 2800 rpm Air consumption per cycle: 5 Nl Intake port: 1 x 120 mm / 1 x 100 mm Air pressure: 6 - 8 bar Voltage: V 400/50 Hz 3 phase Worktop height: 900 mm +- 20 mm Color: Ral 7035 ----- Total price ex works: on request! ----- Options like: - Inlet/outlet with undriven rollers/flat table - Mechanical or pneumatic stops - Electronic length stop / slider Salvastop (Combo series) Iodpfoxmk Ddsx Aabebc - Movable front protection and more on request! ----- (technical data according to the manufacturer without guarantee!)

Condition: used, STROMAB TR 500 – Under-Table Crosscut Saw with Pneumatic Feed For sale is a STROMAB TR 500 under-table crosscut saw equipped with a pneumatic saw blade feed and a 500 mm blade diameter. This machine is ideal for precise and efficient crosscutting of workpieces in workshop environments. Year of manufacture: 2009 Machine no.: 3229 — Technical specifications • Max. cutting width: 360 mm • Cutting height: 135 mm • Saw blade diameter: 500 mm • Infeed roller conveyor length: 1,000 mm • Outfeed roller conveyor length: 1,000 mm • Table height: 850 mm • Main motor: 7.5 kW • Saw blade feed: pneumatic • Conformity marking: CE mark • Weight: approx. 420 kg — Condition & delivery The machine is in technically perfect condition and ready for immediate use. • Inspection possible at any time • Shipping securely packed on a pallet via freight forwarder possible at short notice — Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices are net plus 19% VAT. Subject to change and error. Ibodsxiza Uepfx Aaboc

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 035-110235, saw blade diameter: 650 mm, cutting height (max.): 245 mm, type of input current: three-phase, AVOLA – CIRCULAR SAW BENCH GAMA65K Ibjdoxhg Sgopfx Aabjc for cross and mitre cutting - The modular GAMA system for your individual woodworking needs - Technical specifications: Motor output 10 kW – direct drive – Motor speed 3,000 rpm / Sawblade speed 3,000 rpm Blade height at 90° / 245 mm – 45° / 164 mm – 30° / 113 mm Electrical sawblade inclination 90°–30° with digital readout Revolving table 30°–150° Automatic clamping hood Pneumatic cross-cutting operation / Laser guidance for cross-cutting TCT – sawblade 650 / 30 mm

Condition: like new (used), electronic adjustment of blade tilt 90° – 45° maximum cutting width: 650 mm electronic adjustment of saw height automatic material feed touch control panel laser rotating work table 0° – 345° Isdpfjxfr Etjx Aabsbc maximum blade diameter: 800 mm motor power: 16.6 kW year of manufacture: 2016 CE marked 400 V

Condition: used, Year of construction: 1976, Storage location: Nattheim Ijdpfx Aasxc Ntcjbobc

Condition: used, Year of construction: 1999, Cutting height at 90°: 135 mm Cutting length: mm Saw blade swivel and tilt: yes Ibedpfxoxc Hkle Aaboc Vertical miter range: -60° to +60° Roller conveyor / support table: no Saw blade diameter: Speed: 2800 rpm Motor power: 2 kW Motor brake: yes Extraction connection: 100 mm Machine length: Machine width: Weight: 110 kg

Condition: used, Year of construction: 1997, cutting height at 90°: 170 mm cutting length: 410 mm miter vertikal: -60° bis +60° sawblade diameter: 420 mm Iodpfsxc Hkfsx Aabsbc speed: 2800U/min motor power: 2,2 kW motor brake: yes suction connection: 100mm machine length: 1,20 m machine width: 0,7 m Maschinenhöhe: 1,50 m waight: 110kg

Condition: excellent (used), IM Very good condition. Ibedpfxsxcll Ue Aabec

Condition: excellent (used), Year of construction: 2021, operating hours: 80 h, functionality: fully functional, machine/vehicle number: Stromag CT 600 F, saw blade diameter: 600 mm, cutting height (max.): 410 mm, feed length X-axis: 7,000 mm, feed rate X-axis: 90 m/min, cutting width (max.): 250 mm, total length: 12,000 mm, overall weight: 2,700 kg, type of input current: three-phase, workpiece weight (max.): 80 kg, cutting length (max.): 6,600 mm, air demand: 350 m³/h, input voltage: 400 V, extraction connection diameter: 110 mm, spindle motor power: 7,500 W, main saw diameter: 600 mm, saw blade speed: 2,560 rpm, operating pressure: 6 bar, Keveset Használt.Maró állomás is van benne. Ijdpfx Aaoxcihgobobc

Condition: like new (used), Year of construction: 2020, functionality: fully functional, saw blade diameter: 550 mm, cutting height (max.): 210 mm, overall weight: 220 kg, Radial arm saw Harwi 625 - H - 2K Cutting height: 210 mm Ibodoxcat Tepfx Aaboc Radial cutting length: 1250 mm Motor power: 5 kW (heavy-duty brake) Saw blade: 550 mm Extraction connection: 1x 120 mm + 1x 80 mm The machine has not been extensively used and is in technically and visually excellent condition. The machine can be demonstrated. The machine will remain in use for a project until November. Both tables (front and rear) are also for sale. The tables are fitted with ball rollers and are mobile.

Condition: used, Year of construction: 2025, Neue Ausstellungsmaschine! Partnership Edition, inkl.: - 1 Meter Rollenbahn rechts von der Säge, mit verzinkten Rollen. - 1 Meter Rollenbahn links von der Säge, mit verzinkten Rollen. - 1 Stück pneumatisch wegschwenkbarer Anschlag mit 200 mm Länge und Bedienschalter am Sägegestell SICHER - SOLIDE - SCHNELL Die kompakte, einfache, robuste und innovative Maschine garantiert maximale Sicherheit, Flexibilität und Zuverlässigkeit. Standardzubehör: - Automatische Schutz- und Andruckvorrichtung - Ergonomisch positionierte 2 Hand Steuerung - Schutzschild, starr Tragfähigkeit 230 kg, Durchmesser 60 mm, Abstand 250 mm, Ibedpew Tfzlefx Aaboc Breite 350 mm. Einschließlich hinteres 100 mm hohes Anschlaglineal. Tragfähigkeit 230 kg, Durchmesser 60 mm, Abstand 250 mm, Breite 350 mm. Einschließlich hinteres 100 mm hohes Anschlaglineal mit Skala. - 1 Stück HM Sägeblatt 500 mm, Z = 108 Technische Daten: Maximaler Schnittbereich: 220 x 125 / 260 x 100 / 285 x 80 / 310 x 50 mm Sägemotor: 5,5 kW Sägeblattdurchmesser: 500 mm Drehgeschwindigkeit: 2.800 U/min. Druckluft: max. 8 bar Luftverbrauch pro Zyklus: 5 Nl Absaugstutzen: 1 x 120 mm / 1 x 100 mm Spannung: 400 V / 50 Hz / 3 Ph. Arbeitshöhe: 900 mm +/- 20 mm Mindestabstand zwischen Anschlag und Sägeblatt: 70 mm Mindestabstand zwischen 2 Anschlägen: 60 mm

Condition: used, Year of construction: 2022, Heavy duty rack and pinion push feed system 6000 mm in feed capacity Ø600 saw blade 10 hp saw motor Automatic angle setting (+70 - 70 degrees ) Vertical Clamping Iodpfew Tar Ejx Aabebc Horizontal clamping Electrically interlocked safety hood Touch screen controller 12" colour display Full optimisation 1000 mm out feed table

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 054530, power: 10 kW (13.60 HP), For sale is a fully operational Reinhardt cross-cut line Slim Line SL 170 (year of manufacture 2005). The machine will remain in use at our facility until week 41/2025 and can be inspected on site at any time. Dismantling is scheduled for week 41/2025. The machine has been used in our wood packaging department. Technical specifications / Features: • Model: Slim Line SL170 (Reinhardt) • Year of manufacture: 2005 • Connected load: 10 kW (saw unit 7.5 kW) • Max. cutting width: 290 mm (specification: 50 x 380 mm) • Max. cutting height: 170 mm • Saw blade diameter: 600 mm • Saw blade bore: 30 mm • Feed speed: 90 m/min Ibedpfx Aow S Tvneabjc • Weight: approx. 2 t • Dimensions: approx. 12,610 mm x 1,908 mm • Extraction port diameter: 2 x 125 mm • Cutting length: up to 5 m possible • Maintenance: Ejectors were replaced in December (cost approx. €6,000 net) • Documentation: Operating manual and spare parts list available Condition: Well maintained and fully functional, currently in operation. Detailed photos and further information available on request. Location / Inspection: Location: 83549 Eiselfing – Inspection possible at any time by appointment. Dismantling in week 41/2025. Contact: If you are interested or to arrange a viewing appointment, please contact: 08071 919 267. All information without guarantee. Errors and intermediate sale reserved.

Condition: new, Year of construction: 2024, saw blade diameter: 500 mm, cutting height (max.): 175 mm, Aluminum arm Unit runs on linear guide rails Consistent zero point even when the cutting angle is changed Automatic pneumatic opening of the saw blade guard Return spring for resting position return of the saw unit Support table equipped with a replaceable MDF sacrificial plate Complete machine operation from the front Motor: 400V/3/50Hz, 5.5 HP (4 kW) Total weight: 320 kg Machine comes complete with: TCT saw blade Ø 500 mm, bore 30 mm Motor speed: 2800 rpm Horizontal swiveling: +60° / 0° / -45° Vertical tilting: 0° to +45° Horizontal swiveling lock pneumatic Dust extraction port: 150 mm Cutting width with horizontal swiveling: At 90°: 600 mm At 60° (rotation): 300 mm Ibsdpfx Aaew S Ddcsboc At 45° (rotation): 420 mm Cutting height with vertical tilting: At 0°: 175 mm At 15°: 130 mm At 45° (bevel): 100 mm.

Condition: used, Year of construction: 2001, Wood dimensions to be processed: Input lengths min/max 500 - 6500 mm Full optimization up to max. 1500 mm Input widths min/max 40 - 300 mm Input thicknesses min/max 15 - 120 mm Wood cross-sections max. 300 x 40 mm max. 200 x 120 mm Fixed lengths after sawing min. 510 - 2800 mm Special application: Cutting blocks, length min/max. 100 - 200 mm (Caution: Multiple block lengths at the sorting line; blocks are transported to the end of the sorting line and fall into the customer's grid box). Cutting/cutting tolerance +/- 0.8 - 1.5 mm (for wood types with minimal resin content and an even surface. Tolerance up to 1 m fixed length, max. tolerance for longer pieces up to 2.5 m). Thickness tolerance +/- 3 mm. Curvature of the wood in all directions: max. 10 mm per meter in length. Wood types: soft or hardwood. System performance: Feed speed, continuously adjustable up to max. 230 m/cutting cycle 0.6 - 1. To obtain the practical output per day, an effectiveness factor dependent on the customer's production conditions must be calculated. Infeed and saw height: 900 mm (placed on customer's platform, saw requires concrete base). Sorting working height. 2000 mm Connection values: Total electrical connection value approx. 18 kW Operating voltage 380 Volt / 50 Hz Voltage fluctuations max. 5% Air consumption approx. 1200 NL/operating pressure approx. 8 bar Extraction speed approx. 30 m/nd Color pebble gray RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Item 1 Infeed and marking station with 1 side support table, adjustable 1 table as stop edge Item 2 Support roller without drive, front side in front of sheet metal table for easier feeding Item 3 Length measuring station with built-in fluorescence camera for detecting error markings Item 4 Automatic width measurement, contactless Item 5 OptiCut 304 optimizing cross-cut saw - right-hand version with built-in waste chute including equipment package for large wood cross-sections Graphic input terminal (16 x 40 characters, Numeric keypad) with software package for optimization and system control. Available for processing: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Item 6: Outfeed conveyor as sorting station with drive unit, length 7500 m Item 7: 2 ejectors mounted on the outfeed conveyor Storage location: Nattheim Ibodpfxsw Sy T He Aaboc

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Holtec package cross-cut saw Vario Cut with Holtec mechanization. Jörg Elektronik. Complete disposal/removal under the cross-cutting system. Ijdpfsw Smz Dox Aabobc

Condition: reconditioned (used), - Paul crosscut saw 15 AO Ibedsw Slgfepfx Aabec - hydraulic saw stroke - 150 mm cutting height - 500 mm max. cutting width - 1 non-driven roller conveyor approx. 1,600 mm long

Condition: used, Year of construction: 1994, Cutting length scale up to 5000 mm, saw blade 420 mm, roller conveyor 1500 mm Ibedpfx Aaow Sadrsbsc Storage location: customer

Condition: as good as new (ex-display), Year of construction: 2025, Semi-automatic under-table crosscut saw, including: - 2 meter roller conveyor to the left of the saw with 1 manual folding stop and 1 pneumatic folding stop - 2 meter roller conveyor to the right of the saw Ibjdsw Rcibspfx Aaboc General Technical Data: Maximum cutting area: 220 x 125 / 260 x 100 / 285 x 80 / 310 x 50 mm Saw motor: 5.5 kW Saw blade diameter: 500 mm (Z = 108) Rotational speed: 2,800 rpm Compressed air: max. 8 bar Extraction connectors: 1 x 120 mm / 1 x 100 mm Voltage: 400 V / 50 Hz / 3 Ph. Working height: 900 mm +/- 20 mm Standard equipment: Automatic protection and pressure device Two-hand operation and safety shield Carbide-tipped saw blade SAFE The ergonomically positioned two-hand control and safety guard around the saw blade ensure absolutely safe operation. Safe, protected, and reliable! ROBUST Legend saws are designed and built to work with challenging materials and hard wood even under tough conditions. The frame is made of thick-walled, fully reinforced and coated steel. Robust, compact, and durable. FAST Compared to a pull or radial arm saw, the LEGEND pneumatically guides the saw blade through the workpiece at extremely high speed. This significantly reduces the physical burden on the operator.

Condition: excellent (used), Catalogue number 7722 TECHNICAL DATA - max disc diameter: 450mm - spindle diameter: 30mm - hydraulic clamp also serves as disc guard - hydraulic disc stroke - max cutting width: 400mm - max cutting height: 130mm - main motor: 3.7kW - extraction port diameter: 100mm, 120mm - table dimensions: 670x705mm - table height from base: 800mm - roller tables: 2 pcs - roller dimension: 300mm Table dimensions: - outfeed (length/width; with stop & measuring gauge): 2910x300mm - infeed (length/width): 2250x300mm - machine dimensions (LxWxH): 1000x950x1210mm - total weight: 430kg ADVANTAGES – 2 roller tables Iodew Rb Rwspfx Aabobc – hydraulically adjustable disc – used saw in very good condition Net price: 18900 PLN Net price: 4450 EUR Net price calculated at 4.25 PLN/EUR (in case of significant exchange rate fluctuations, the price may change)

Condition: used, Offered for sale: "Jely" under-table crosscut saw. Year of manufacture approx. 1996. Ibsdew Nyxkopfx Aaboc The under-table crosscut saw operated flawlessly until the end of production. Primarily, round timber in 65 mm and 52 mm was crosscut without issue. The saw was positioned in line with an edging circular saw, enabling efficient crosscutting and edging operations. The controls are designed for two-handed operation. In the photos, the protective covers have been removed for better visibility inside the machine. The machine is in used condition, appropriate for its age. Further details available upon request.