Unex systems Ltd

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25Synthesi01, Stretch Winder Synthesi TECHNICAL DETAILS Turntable / base frame / Ø 2,400 mm Max. pallet dimensions: 1,650 x 1,650 mm Max. load capacity: 2,000 kg Wrapping height (pallet included) 2,400 mm FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically adjustable in the programs in different steps Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs Bwodpfxsz Iqp Tj Af Aeu F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button Optionally possible: Turntable size up to Ø2600 mm Mast height up to 3900mm ramp mounting frame Light scanner for black products cutting device Etc. Other systems available from the Ludwigsburg warehouse. Some images may contain options that are subject to a surcharge. Illustration similar

Condition: excellent (used), Year of construction: 2021, Chen Hsong JetMaster 88-MK6 with Sepro Industrial Robot Succes 7 / Hybrid Machine Year of manufacture: 2021 Injection unit: Screw diameter: 41 mm Shot weight: 246 g Injection pressure: 1890 bar Dosing volume: 271 ccm Clamping unit: Clamping force: 128 t Tie bar spacing: 410x410 mm Platen size: 620x605 mm Ejector: electric Clamping unit: toggle Control: BECKHOFF - Touchscreen Bwjdoz Iqp Hspfx Af Aju Additional equipment: Hybrid machine: high-speed, energy-saving, and very quiet Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 2 Control with hot runner system x 8 Injection unit hardened - bimetal Main motor of the machine - servo motor with inverter drive - energy saving Central lubrication Automatic tool height adjustment Rexroth hydraulics The machine was serviced in Germany Robot Samfacc Year of manufacture: 2022 4-axis robot: 3 axes are driven with servo motors (electric): X, Y (telescopic), Z; Axis C – pneumatic Safety package for robots Robot with adapter, conveyor belt, and protective housing Purchase of the robot and conveyor belt for an additional charge Dimensions: Weight: 4000 kg Length/Width/Height: 4.90x1.30x1.80 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2003, Arburg 270S 250-60 U / Universal Machine Year of Manufacture: 2003 Injection Unit: Screw Diameter: 18 mm Shot Weight: 17 g Injection Pressure: 2500 bar Dosing Volume: 20 ccm Clamping Unit: Clamping Force: 25 t Tie Bar Spacing: 270x270 mm Platen Size: 400x400 mm Ejector: hydraulic Clamping Unit: hydraulic Control System: SELOGICA - Touchscreen Additional Equipment: Universal machine - Injection unit can operate both vertically and horizontally Euromap 12 Robot interface Air valve x 4 Hydraulic core pull x 1 Control system with hot runner system x 8 Injection unit hardened - bimetal Proportional valve on the injection unit – precise injection Type of injection unit: Vario, allows the injection unit to be used, for example, for side injection Automatically opening cover Dimensions: Weight: 1900 kg Length/Width/Height: 2.89x1.11x1.85 m All machines offered are started by our service technicians before sale. Bsdpfjz Iqpyex Af Aowu It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 1999, Arburg 221KS 250-75 / Universal machine Year of manufacture: 1999 Bsdpfx Afjz Iqpto Aswu injection unit: Screw diameter: 20 mm injection weight: 26 g Injection pressure: 2350 bar Metering volume: 31 ccm Clamping unit: Clamping force: 25 t tie bar distance: 221 mm size of clamping platens: 342x250 mm ejector: hydraulic clamping unit: toggle lever Control system: SELOGICA Additional equipment: Universal machine - injection unit can run both vertically and horizontally Control with air valve Core pull control injection unit hardened - bimetal Clamp for fixing the injection unit vertical Dimensions: Weight: 1150 kg Length/width/height: 2.63x1.34x1.93 m Drive: Pump/motor: 5.5 kW Heating power: 4,6 kW Total power: 10,1 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: used, functionality: fully functional, mileage: 1,03,033 km, first registration: 06/2020, fuel type: diesel, overall weight: 3,500 kg, fuel: diesel, gearing type: mechanical, emission class: euro6, suspension: steel, number of seats: 3, loading space length: 3,200 mm, loading space width: 1,600 mm, Year of construction: 2020, Equipment: ABS, airbag, VOLKSWAGEN CRAFTER 2.0 TDI 140 HP ISOTHERMIC VAN WITH FNAX REFRIGERATION UNIT - YEAR 06/2020 - EURO 6 - KM 103033 - CC 1968 - HP 140 - KW 103 - INTERNAL LENGTH 3200 mm - WIDTH 1600 mm - HEIGHT 1790 mm - USEFUL LOAD CAPACITY 600 kg - ABS - AIR CONDITIONING - CENTRAL LOCKING - CD RADIO - ELECTRIC MIRRORS - ELECTRIC WINDOWS - FOR INFORMATION, CONTACT FRANCESCO. Bjdpfxsz Iqpaj Af Ajwu

Condition: excellent (used), Year of construction: 2013, Engel Victory 80/50 Spex with sprue picker Engel ER-USP5 / Hybrid machine Year of manufacture: 2013 Injection unit: Screw diameter: 18 mm Injection weight: approx. 22 g Injection pressure: 2200 bar Dosing volume: 25 ccm Clamping unit: Clamping force: 50 t Tie bar spacing: 0x0 mm Size of clamping plates: 500x450 mm Ejector: hydraulic Clamping unit: hydraulic Control system: CC 200 - Touchscreen Additional equipment: Tie-bar-less, hybrid machine: energy-saving and very quiet Air valve x 2 Control system with hot runner system x 6 Injection unit is wear-resistant and resistant to corrosion Main motor of the machine - servo motor driven by an inverter - energy saving It is possible to change the screw diameter to 22 or 25 mm Purchase of the sprue picker at an additional cost Dimensions: Weight: 2900 kg Length/Width/Height: 3.30x1.60x2.30 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Price: On request Bjdpfoz Iqn Nex Af Aswu

Condition: excellent (used), Year of construction: 2005, Krauss Maffei KM 80-180 CX with the Sepro Industrial Robot 55 sprue picker Year of construction: 2005 Injection unit: Screw diameter: 30 mm Injection weight: 77.4 g Injection pressure: 2025 bar Dosing volume: 85 ccm Clamping unit: Clamping force: 80 t Bwodpfx Aez Iqn Ajf Aou Distance between tie bars: 420x420 mm Size of the clamping plates: 670x670 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC V - touch screen Additional equipment: Euromap 67 Robot interface Control unit with air valve Hydraulic core pull x 1 Hardened injection unit - bimetal Sprue picker Sepro Industrial Robot 55 Year of construction: 2018 It is possible to purchase a Moretto brand raw material feeding system for an additional charge The set includes: - Screw feeder, volumetric with hopper - Feeder with proportional valve Dimensions: Weight: 3900 kg Length/width/height: 3.80x1.50x2.10 m Drive: Pumps/motor: 15 kW Heating output: 8.12 kW Total output: 23.12 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Year of construction: 2026, operating hours: 2 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S22EVA_03, Exhibition machine - like new. EVA Turntable / base frame increased / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 1,500 kg Wrapping height (pallet included) 2,200 mm Raised base frame by 150mm - 200mm, for charging with E-Ant - adjustable Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 1 storable wrapping program F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - manual winding F12 - winding to a stored height (while switching off the light button) F29 - Soft start cycle for edge protection application Soft start to reduce film tears on sharp pallet edges FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Bodjz Iqnvjpfx Af Ajwu Other systems are immediately available from stock.

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 320 mm, travel distance Z-axis: 1,097 mm, controller manufacturer: SIEMENS, controller model: 840D, number of axes: 2, Horizontal turning machine manufactured in 2000. This Gildemeister CTX 500 S2 features a maximum turning diameter of 455 mm and a turning length of 1097 mm. It includes a robust tool system with a disc turret and a maximum chuck diameter of 315 mm. If you are looking to get high-quality turning capabilities, consider the Gildemeister CTX 500 S2 machine we have for sale. Contact us for further details. Bodpfx Afez Iqnpj Aowu - Max. Swing Over Bed / Slide: 680 mm / 670 mm- Max. Turning Diameter over Face Slide: 455 mm- Max. Turning Length: 1097 mm / 2097 mm- Spindle Head Flange: 220 mm (Size 220h5)- Spindle Bore: 107 mm- Spindle Bearing Front Diameter: 140 mm- Max. Chuck Diameter: 315 mm / 400 mm- Tailstock Quill Taper: MK 5 / MK 6- Tailstock Quill Diameter: 120 mm- Tailstock Quill Stroke: 120 mm- Tool System: Disc Turret- Number of Slide Carriage Sets: 1- Number of Face Slides: 1- Longitudinal Stroke: 1097 mm / 2097 mm- Face Stroke: 320 mm- Max. Torque: 650 Nm / 2000 Nm- Feed Force (Longitudinal / Plan): 1 N / 8000 N- Rapid Feed (Longitudinal / Plan): 30 m/min / 24 m/min- Feed Speed Range: mm/min- Main Drive Motor Type: B3- Feed Drive X-Plan Motor: Siemens 1FK6063-6AF71-1AH0 (1.9 kW, 3000 rpm, IP64)- Feed Drive Z-Longitudinal Motor: Siemens 1FK6101-8AF71-1AG0 (4.9 kW, 3000 rpm, IP64)- Lubrication Motor: Vögele 113.50.000701C (0.13 kW, 2200 rpm, IP44)- Hydraulic Motor: 2.2 kW, 1450 rpm, IP54- Connected Load / Power Requirement: 58 kVA- Voltage: 400 V- Frequency: 50 Hz- Current: 85 A- Fuse Rating: 100 A- Control Voltage: 230 V AC / 24 V DC- Floor Space Required: 8.41 m x 4.3 m x 2.41 m (5607/6657 x 3285 x 2405 mm)- Machine Weight: 8700 kg / 10000 kg- Additional Equipment: Chip conveyor with chip container, coolant system, exhaust filter unit (IFM) Technical Specification Counter Spindle No Driven Tools Yes

Condition: excellent (used), Year of construction: 2020, Krauss Maffei KM 81-380 PX with Sepro Industrial Robot Succes 7 / Electric Machine Year of manufacture: 2020 Injection unit: Screw diameter: 35 mm Shot weight: 140 g Injection pressure: 2429 bar Dosing volume: 154 ccm Clamping unit: Clamping force: 80 t Tie bar spacing: 420x370 mm Platen size: 560x510 mm Ejector: electric Clamping unit: toggle Control system: MC6 - Touchscreen Additional equipment: Machine in very good technical condition Electric machine: energy-saving and very quiet Operating hours: approx. in automatic mode Euromap 67 Robot interface Air valve with vacuum x 2 Bwodjz Iqniopfx Af Aou Hydraulic core pull x 1 Control system with hot runner nozzles x 15 Injection unit is wear-resistant and resistant to corrosion Main motor of the machine - servo motor driven by an inverter - energy saving Central lubrication Parallel movements Automatic tool height adjustment Robot Industrial Robot Succes 7 Year of manufacture: 2017 4-axis robot: 3 axes are driven by servo motors (electric): X, Y, Z; axis C – pneumatic Safety package for robots Robot with adapter, conveyor belt and safety enclosure Purchase of the robot and conveyor belt at an additional cost Dimensions: Weight: 7900 kg Length/Width/Height: 4.90x1.53x1.85 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2008, Krauss Maffei KM 35-55 CX / machine in very good technical condition Year of manufacture: 2008 injection unit: Screw diameter: 18 mm injection weight: 18 g injection pressure: 2500 bar Dosing volume: 20 ccm Clamping unit : clamping force: 35 t tie bar distance: 320x320 mm size of clamping platens: 540x540 mm Ejector: hydraulic clamping unit: hydraulic Control: MC V - touch screen Additional equipment: Machine in very good technical condition Euromap 67 Robot interface Air valve x 2 Control with hot runners x 6 injection unit hardened - bimetal The machine has been regularly serviced by the authorized service Krauss Maffei in Germany. It is possible to change the screw diameter for fi 20 mm, 22 mm Dimensions: Weight: 2600 kg Length/width/height: 3.50x1.40x1.70 m Drive: Pumps/motor: 11 kW Heating power: 3,78 kW Total power: 14,78 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Bjdpfx Afoz Iqm Ss Aswu Price: Upon request

Condition: used, This used META shelving unit is a compact and flexible storage solution for workshops, warehouses, archives, and businesses. With a height of 250 cm, a depth of 40 cm, and a total of 6 storage levels, the shelving unit offers ample space for the organized storage of boxes, containers, spare parts, and other storage items. The modular shelving system can be used in a variety of ways and enables efficient use of the available storage space. 3.06 linear meters of shelving units, 40 cm deep, used, workshop shelving, warehouse shelving, hand storage, plug-in shelving, small parts storage. Data: - Height: approx. 250 cm - Depth: approx. 40 cm - Length: approx. 3.06 linear meters Shelving unit offer 1.06 linear meters, consisting of: - 04 x uprights approx. 200 x 40 cm, pre-assembled - 18 x shelves approx. 100 x 40 cm - 72 x shelf supports - 03 x cross braces - Manufacturer: META CLIP - Load capacity: 100 kg per shelf, with evenly distributed load - Levels: 6 x storage levels - Surface: Sendzimir galvanized - Used, available from stock -- IMMEDIATELY AVAILABLE IN MULTIPLE UNITS -- Bsdpfx Afjz Iqmxs Ajwu Price: €253.00 net plus legally applicable VAT You will receive an invoice with VAT shown. Transport: Delivery can be arranged by our partner shipping company upon request; the costs depend on the postal code. Assembly: Our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment if required. Our recommendation: Let us know your requirements... We will be happy to help you with the implementation of your projects, from planning to ordering and assembly. Are you interested or do you have any questions? Simply contact us by message or phone. You can find our telephone number on our company page. ☎️ You can reach us by phone from Monday to Friday, 08:00 - 15:00. Alternatively, you can send us a message with your name and phone number, and we will get back to you as soon as possible.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, pressing force: 250 t, stroke length: 365 mm, table length: 4,100 mm, Equipment: CE marking, safety light barrier, 1 used Edwards Pearson PR 250 Ton x 4 Metre (often listed as the 250/4100 model) is a heavy-duty, multi-axis CNC hydraulic press brake for sale - highly regarded in the metal fabrication industry for its robust build and longevity. Below is an overview of the technical specifications, variants, and common configurations for this machine based on historical industrial data and machinery listings: ⚙️ Core Technical Specifications • Bending Capacity: 250 Tonnes (Metric) • Max. Bend Length: 4100 mm (4.1 Metres) Year 2002 • Foundation: Free-standing design 🛠️ Common Variants & CNC Controls Bwedpfx Afez Iqmrj Aeu Configured as a 6 axis machine featuring a 4 axis back gauge (X, R, Z1, Z2,) paired with a Cybelec DNC 1200 control unit. • Features hydraulic crowning system to keep bends precise across the full 4-metre span.

Condition: used, mileage: 15,450 km, power: 110 kW (149.56 HP), first registration: 03/2023, fuel type: diesel, overall weight: 3,500 kg, fuel: diesel, energy efficiency: G, color: white, gearing type: mechanical, emission class: euro6, suspension: steel, number of seats: 3, total width: 2,345 mm, total height: 2,266 mm, Equipment: air conditioning, airbag, cruise control, power assisted steering, soot filter, A50 front axle with increased load capacity, BH2 control code for hydraulic unit variant 1, BK2 control code for wheel brake configuration 2, C6L multi-function steering wheel, CB7 stabilization level I, CL1 steering wheel adjustable in inclination and height, E57 electrical system for trailer socket, E7A pre-wiring for digital radio (DAB), ED4 fleece battery 12 V 92 Ah, ED8 pre-wiring for electrical system – parameterizable special module, ER0 radio pre-wiring, ES0 jump start – contact, EW6 digital extra: Remote Services Plus, EY5 Mercedes-Benz emergency call system, EY6 breakdown management, F68 heated and electrically adjustable exterior mirrors, FF5 storage compartment above windshield, FJ4 storage compartment under dashboard, GE9 6-speed manual transmission, H20 heat-insulating glass all around, HH9 semi-automatic TEMPMATIC climate control system, HI1 climate zone 1 (cold/comfort), IF0 model series C910 VS30 FWD, IF3 chassis with cab, IG4 standard, IG5 basic, IT4 3.5-ton vehicle, J10 speedometer km/h, J55 seat belt warning system for passenger seat, J58 seat belt warning system for driver seat, J65 outside temperature display, JG0 shift point indicator, JH3 communication module (LTE) for digital services, K12 main tank 65 liters, KP7 exhaust gas purification SCR generation 4, L07 outline lights, LA2 headlight assist, LB1 side marker lights, LE1 adaptive brake light, LX5 Europe, M46 generator 14 V / 220 A, M72 vehicle compatible with HVO, MJ8 ECO start-stop function, MS1 TEMPOMAT (cruise control), MT6 emission class Euro 6d N1, P02 platform body with aluminum side panels, P2R basic package, P47 mud flaps front, Q11 longitudinal member reinforcement, Q67 towing eye rear, QB1 vehicle pre-wiring for trailer load up to 2000 kg, RF1 tire manufacturer Continental (10), RM0 all-season tires, RN5 tires 225/65 R16 C, RS3 steel wheels 6.5 J x 1, We can be reached by phone Monday to Friday until 8:00 PM and on Saturdays until 4:00 PM!! Further:!! Bodpfxoz Iqmlj Af Aswu Leasing/financing and trade-in possible!! !! !! -Errors and prior sale excepted!! -All information without guarantee ... more on our homepage

Condition: used, mileage: 36,200 km, power: 125 kW (169.95 HP), first registration: 05/2025, fuel type: diesel, overall weight: 3,500 kg, fuel: diesel, color: white, gearing type: mechanical, suspension: steel, number of seats: 3, total width: 2,345 mm, total height: 2,280 mm, Equipment: air conditioning, airbag, central locking, cruise control, immobilizer system, navigation system, onboard computer, power assisted steering, seat heater, soot filter, E07 Hill-start assist, F2W Winter package, 055 AEJ X4/2, 502 Digital extra: Updates for intelligent speed assistant, 805 AEJ X4/1, A50 Front axle with increased load capacity, B25 Parking brake, electric, BA3 Active brake assist, BH8 Control code for hydraulic unit variant 7, BK3 Control code for wheel brake configuration 3, C6L Multifunction steering wheel, CB7 Stabilization level I, CL1 Steering wheel adjustable in height and tilt, CT1 Vibration damper, E1D Digital radio (DAB), E1E Digital extra: Hard disk navigation, E1U USB socket 5 V, E2A Connection for special signals in the cockpit, E2I Auxiliary battery for retrofitted consumers, interior, E30 Battery main switch, single-pole, E36 Separating relay for battery additionally, E46 Socket in the cab, E4S Digital extra: Smartphone integration, E57 Electrical system for trailer socket, E7M MBUX multimedia system, ED4 AGM battery 12 V 92 Ah, ED8 Pre-installation electrical system, parameterizable special module, ES0 Jump start - contact, ES5 Charging package, instrument panel, EW6 Digital extra: Remote Services Plus, EY2 Digital extra: Live Traffic Information, EY5 Mercedes-Benz emergency call system, EY6 Breakdown management, F68 Exterior mirrors, heated and electrically adjustable, FF5 Storage compartment above the windshield, FG8 Cupholder in front, FJ1 Folding cover for storage compartment, FJ4 Storage compartment under the cockpit, FM3 WET WIPER SYSTEM, FR7 Pre-installation electrical system for reversing assist, FU5 Exterior mirrors without indicator, FZ5 Anti-theft and burglary alarm system, GD8 6-speed manual gearbox ECO Gear, H15 Seat heating for front passenger, H16 Seat heating for driver, H21 Thermally insulated glass with band filter on the windshield, HH9 Semi-automatic controlled TEMPMATIC air conditioning, HI1 Climate zone 1 (cold/comfort), IF3 Chassis with cab, IG5 Basic, IH1 Head unit Euro., We are available by phone from Monday to Friday until 8:00 PM and on Saturdays until 4:00 PM!! More:!! Leasing/financing and trade-in possible!! !! !! Bwsdpfx Afoz Iqmfe Aou -Errors and prior sale excepted!! -All information without guarantee ... more on our homepage

Condition: used, mileage: 17,350 km, power: 100 kW (135.96 HP), first registration: 08/2025, fuel type: electric, overall weight: 3,500 kg, fuel: electricity, energy efficiency: A+, color: white, gearing type: automatic, suspension: steel, number of seats: 3, total width: 2,345 mm, total height: 2,331 mm, Equipment: air conditioning, airbag, cruise control, onboard computer, parking sensors, power assisted steering, seat heater, sliding door, E07 Hill-start assist, F2W Winter package, 502 Digital extra: Updates for intelligent speed assistant, 805 AEJ X4/1, B25 Parking brake, electric, BA3 Active brake assist, BH1 HOLD function, BH8 Control code for hydraulic unit variant 7, BK3 Control code for wheel brake configuration 3, C6L Multifunction steering wheel, CL1 Steering wheel adjustable in inclination and height, D50 Continuous partition, E1D Digital radio (DAB), E1U USB socket 5 V, E57 Electrical system for trailer socket, E5J DC charging 50 kW, E6A AC charging up to 11 kW, E7B Digital extra: Pre-installation for navigation, E7M MBUX multimedia system, E7V High-voltage battery (56 kWh), E96 Charging socket for electric vehicle Type 2, ED1 Fleece battery 12 V 70 Ah, EE5 Ultracap – locking for automatic transmission, ES0 Jump-start contact, EW5 Digital extra: Remote and Charging Premium, EW8 Digital extra: Remote and Navigation Services, EY5 Mercedes-Benz emergency call system, EY6 Breakdown management, F1K Clothes hook in the driver's cab, F64 Electrically folding exterior mirrors, F68 Heated and electrically adjustable exterior mirrors, FF5 Storage compartment above the windshield, FG8 Cup holder in front, FJ4 Storage compartment under the cockpit, FM3 WET WIPER SYSTEM, H15 Seat heating for front passenger, H16 Seat heating for driver, H1K Pre-conditioning, H21 Heat-absorbing glass with band filter in the windshield, HH2 Electric auxiliary heater, HH9 Semi-automatic TEMPMATIC climate control system, HI1 Climate zone 1 (cold/comfort), IG5 Basic, IH1 Head unit Europe/CIS countries/Mongolia, IR4 Wheelbase 3665 mm, IT4 3.5-ton vehicle, J10 Speedometer km/h, J2A Acoustic ambient protection, J55 Seatbelt warning system for front passenger seat, J58 Seatbelt warning system for driver's seat, J65 Outside temperature display, JA7 Blind Spot Assist, JB4 Active Lane Keeping Assist. We are available by phone Monday to Friday until 8:00 PM and on Saturdays until 4:00 PM!! Further:!! Leasing/financing and trade-in possible!! !! !! -Errors and prior sale excepted!! -All information without guarantee ... more on our website. Bwedpfez Iql Ujx Af Aju

Condition: excellent (used), Year of construction: 2006, Demag Ergotech System 80/420-430 Year of manufacture: 2006 Injection unit: Screw diameter: 40 mm Injection weight: 205 g Injection pressure: 2020 bar Metering volume: 231 ccm Clamping unit: clamping force: 80 t tie bar distance: 420x420 mm size of clamping platens: 580x590 mm ejector: hydraulic clamping unit: hydraulic Control system: NC4 Additional equipment: Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 3 Control with hot runners Injection unit hardened - bimetal Built-in printer It is possible to change the screw diameter Dimensions: Weight: 4100 kg Length/width/height: 4.10x1.40x1.90 m Bodpsz Iql Ijfx Af Aswu All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: like new (used), Year of construction: 2023, functionality: fully functional, total length: 1,310 mm, total width: 390 mm, total height: 40 mm, 120 pcs. Shelves approx. 131 x 39 x 4 cm , SSI Schäfer R3000 , II. choice (new) Shelving racks Workshop shelving , Storage racks , Manual storage , Push-in shelving , Small parts storage B40/392/70 , ZB341315 , ZB9414 Bwjdpfx Aoz Iqlzsf Aeu Data : - Length: approx. 131.2 cm - Width: approx. 39 cm - Height: approx. 4 cm - Scope: 120 pcs. Shelves SSI Schäfer R3000 - Load : max. 100 kg per shelf - Surface : sendzimir galvanized - II. CHOICE (NEW GOODS)(This is a II. Wahl product, new and unused.II. Choice means there may be dust deposits, minimal scratches or soiling). - ex warehouse Wietmarschen Price : 960,00 € net 1142,40 € gross You will receive an invoice with VAT shown. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: used, This used META shelving unit is a compact and flexible storage solution for workshops, warehouses, archives, and businesses. With a height of 250 cm, a depth of 40 cm, and a total of 6 storage levels, the shelving unit offers sufficient space for the organized storage of boxes, containers, spare parts, and other storage items. The modular shelving system can be used in a variety of ways and enables efficient use of the available storage space. 100.06 linear meters of shelving units, 40cm deep, used, workshop shelving, warehouse shelving, hand-stacking, boltless shelving, small parts storage. Data: - Height: approx. 250 cm - Depth: approx. 40 cm - Length: approx. 100.06 linear meters Shelving offer of 100.06 linear meters consisting of: - 0101 x uprights approx. 200 x 40 cm, pre-assembled - 0600 x shelves approx. 100 x 40 cm. - 2400 x shelf supports. - 0100 x cross braces - Manufacturer: META CLIP. - Load capacity: 100 kg per shelf, with evenly distributed load. - Levels: 6 storage levels. - Surface: Sendzimir galvanized. - Used, available from stock Bedpoz Iqluofx Af Aswu -- IMMEDIATELY AVAILABLE IN MULTIPLE UNITS -- Price: €7,118.00 net plus legally applicable VAT. You will receive an invoice with VAT shown. Transport: Delivery can be arranged via our partner logistics company, if desired. The costs depend on the postal code. Assembly: Our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment, if required. Our recommendation: Let us know your requirements... We will be happy to help you realize your projects, from planning to ordering to assembly. Are you interested or do you have any questions? Simply contact us via message or phone. You will find our telephone number on our company page. ☎️ You can reach us by telephone from Monday to Friday, 08:00 - 15:00. Alternatively, you can send us a message with your name and number, and we will get back to you as soon as possible.

Condition: excellent (used), Year of construction: 2019, Vertical CNC lathe – 3 axes Brand: HYUNDAI WIA Type: LV 800 RM Year: 2019 (575 cutting hours) CNC: FANUC 32iB + manual guide Specifications: Turning capabilities: Maximum swing diameter: 890 mm Maximum turning diameter: 800 mm Maximum turning height: 800 mm Horizontal travel: 440 mm Vertical travel: 800 mm C-axis: 360,000 positions 3-jaw hydraulic chuck: Diameter: 530 mm Rotation speed: 2000 rpm Main motor power: 37/30 kW Dimensions (width x depth x height): 2000 x 2877 x 3300 mm Bwjdez Iqlnjpfx Af Aju Weight: 11 tons Equipped with: 12-tool turret C-axis 0.001° Rotating tool spindles 7.5 kW, 3000 rpm Through-tool coolant supply 20 bar Renishaw Quickset Rotating tool holders: 3 x axial, 3 x radial Turning tool holders Set of chuck jaws Manual 3-jaw chuck, dia. 630 mm Chip conveyor

Condition: new, 15.06 m shelving, 40 cm deep , Workshop shelving , Storage shelving , Manual storage , Push-in shelving , Small parts storage Data : - Height : approx. 200 cm - Depth : approx. 40 cm - Length : approx. 15.06 running meters Shelf offer 15.06 running meters consisting of: - 016 x upright approx. 200 x 40 cm, disassembled (incl. 2 x base & 2 x cover cap). - 075 x shelf approx. 100 x 40 cm. - 300 x shelf holder. - 016 x Diagonal 1176 mm ( for crossing ). - 016 x turnbuckle ( for intersection ). - Manufacturer: META CLIP. - Load: 150 kg per shelf, with evenly distributed load. - Levels: 5 x storage levels. - Surface: sendzimir galvanized. - New from stock. Bjdpfxoz Iqlhj Af Aowu - Made in Germany. - 100% quality at the best price. We can pre-assemble the frames for a small surcharge of 2€/net per piece. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 1648,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. Transportation : On request, delivery can be carried out by our partner shipping company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation. Are you interested or do you have any questions? Simply contact us by message or phone call. You can find our telephone number on our company page. ☎️ You can reach us by phone from Monday to Friday, 08:00 - 15:00. Alternatively, you can send us a message with your name and number and we will get back to you as soon as possible.

Condition: excellent (used), Year of construction: 1995, Demag Ergotech Compact 250-80 Year of manufacture: 1995 Injection unit: Screw diameter: 18 mm Injection weight: 20 g injection pressure: 2400 bar Dosing volume: 22.8 ccm Bwedpfx Afoz Iqlbj Aou Clamping unit: clamping force: 25 t tie bar distance: 280x280 mm size of clamping platens: 410x410 mm ejector: hydraulic clamping unit: hydraulic Control system: NC4 Additional equipment: Air valve x 2 Hydraulic core pull x 1 Injection unit hardened - bimetal Original Demag mold crane: chain, electrically controlled, 2 lifting speeds Dimensions: Weight: 2600 kg Length/width/height: 3.20x1.30x1.80 m Drive: Pumps/motor: 7,5 kW Heating power: 3,7 kW Total power: 11,2 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: new, 60.06 m shelving, 60 cm deep , Workshop shelving , Storage shelving , Manual storage , Push-in shelving , Small parts storage Data : - Height : approx. 200 cm - Depth : approx. 60 cm - Length : approx. 60.06 running meters Shelf offer 60.06 running meters consisting of: - 0061 x upright approx. 200 x 60 cm, disassembled (incl. 2 x base & 2 x cover cap). - 0300 x shelf approx. 100 x 60 cm. - 1200 x shelf holder. - 0061 x Diagonal 1176 mm ( for crossing ). - 0061 x turnbuckle ( for intersection ). - Manufacturer: META CLIP. Bjdpfx Ajz Iqk Rsf Ajwu - Load: 150 kg per shelf, with evenly distributed load. - Levels: 5 x storage levels. - Surface: sendzimir galvanized. - New from stock. - Made in Germany. - 100% quality at the best price. We can pre-assemble the frames for a small surcharge of 2€/net per piece. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 8000,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs for this depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: excellent (used), Year of construction: 2017, Boy 55A Pro / Operating hours: 17,083 in automatic mode / Machine in very good technical condition. Year of manufacture: 2017 Injection unit: Screw diameter: 38 mm Injection weight: 123.9 g Injection pressure: 1508 bar Metering volume: 136.1 ccm Clamping unit: Clamping force: 55 t tie bar distance: 360x335 mm size of clamping platens: 665x600 mm ejector: hydraulic clamping unit: hydraulic Bodpoz Iqkwjfx Af Aewu Control system: Procan Alpha - touch screen Additional equipment: Machine in very good technical condition Operating hours: 17.083 in automatic mode Pneumatic core x 2 injection unit hardened - bimetal The machine has been regularly serviced by the authorized service boy in France It is possible to change the screw diameter for fi 32 mm or 42 mm Dimensions: Weight: 2430 kg Length/width/height: 3.25x1.14x2.02 m Drive: Pumps/motor: 11 kW Heating power: 7,7 kW Total power: 18,7 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2020, Boy XS / Excellent technical condition Year of manufacture: 2020 Injection unit: Screw diameter: 12 mm Shot weight: 4.1 g Injection pressure: 3128 bar Bwedpfx Afsz Iqk Do Aou Dosage volume: 4.5 ccm Clamping unit: Clamping force: 10 t Tie bar spacing: 160 mm Size of mounting platens: 321x246 mm Ejector: hydraulic Clamping unit: hydraulic Control system: Procan Alpha 4 - Touchscreen Additional equipment: Machine as new Euromap 67 Robot interface Air valve x 6 Integrated side sprue picker Automatic Wittmann loader with Farratech brand dryer Optional: AMF brand clamping elements for tooling available for purchase Dimensions: Weight: 450 kg Length/Width/Height: 1.48x0.52x1.38 m All offered machines are started up by our service technicians prior to sale. A video of the technical inspections of the selected machine can be provided, or you can participate in live technical tests at our facility in Łódź. Price: On request