König Aufbereitungstechnik GmbH

Condition: used, mileage: 8,542 km, gearing type: automatic, fuel type: electric, color: yellow, overall weight: 1,050 kg, maximum load weight: 2,000 kg, number of seats: 1, first registration: 11/2012, emission class: none, suspension: other, Year of construction: 2012, operating hours: 8,542 h, driver cabin: other, fuel: electricity, load capacity: 2,000 kg, The Jungheinrich ESE 220 low-lift pallet truck with driver's seat, first registered on 13.11.2012, is a used electric vehicle specifically designed for commercial applications. With a total of 8,542 kilometers or operating hours, this forklift offers reliability and efficiency for in-plant handling tasks. The automatic transmission ensures easy operation, while the 24V battery provides the necessary power for daily use. Fgedpfx Asxmlf Aeabjh This model comes in yellow and has a permissible total weight of 1,050 kg, making it suitable for various loading requirements. The ESE 220 features an operator's seat for comfortable use during extended shifts. With only one previous owner, the forklift is in good overall condition and ready for immediate deployment. Viewings are possible without appointment, and delivery within Germany is available at an additional charge. Interested parties are encouraged to use the seller’s contact channels for further information. Sale exclusively to commercial customers (agriculture, freelancers, small and large businesses) or for export. Errors and prior sale excepted.

Condition: used, operating hours: 6,077 h, Equipment: soot filter, According to our "General Terms and Conditions" and without any warranty or guarantee, we are pleased to offer you the following vehicle today. This offer is non-binding until completion and subject to errors, misprints, and prior sale: Liebherr LRS 645 Container Loader Year of manufacture: 2010 6-cylinder diesel engine Displacement: 10,500 cc 270 kW / 367 hp 6,076.8 operating hours 2,627.3 driving hours 9,067 km Unladen weight: 71 t Lifting capacity during travel: 43 tonnes, lifting capacity with hydraulic stabilizers deployed and stationary: 45 tonnes Spreader suitable for 20", 30", 40" and 45" containers Diesel tank capacity: 600 liters Hydraulic oil reservoir: 900 l Steering axle track width: 3,313 mm Drive axle track width: 4,231 mm Front hydraulic stabilizers Central lubrication system Servo-assisted mast rotation Hydraulically extendable loading mouth 2 drive motors; drive motor on operator side replaced new in 2024 Rear-view camera Various work lights 2 x revolving beacon lights (rear) Tow hook (rear) 2 x reversing lights Hydraulic rear steering 2 x rubber buffer pads (front) Tyres: 18.00-25 Bridgestone, 40 PLY Rating Tubeless, Extra Tread Tube tires, front with dual tires approx. 70%, rear with single tires approx. 80% Full cab with air conditioning Radio / CD Grid roof Roller blind Cab extendable to front edge Maximum height: 19,250 mm Maximum lifting height (spreader): 16,190 mm Maximum reach: 18,900 mm Minimum reach (at max lifting height): 13,000 mm Wheelbase: 6,500 mm Fedjxl Ixijpfx Aabegh Overall length: 9,200 mm Price: €160,000 (net) All information is provided without any warranty or guarantee. Our "General Terms and Conditions" apply. For disputes up to a value of €50,000, jurisdiction lies with the District Court of Ludwigslust, and for values exceeding this, with the Regional Court of Schwerin. Subject to errors, misprints, and prior sale.

Condition: used, New: Yes Empty weight: 334 kg Type number: 20kva Stahlzet Germany 230V + 400V SW-20KW 334kg 1120 mm x 660 mm x 1030 mm 92DB OEM : 20kva Fgodpfx Aasxlwgisbsh Article nr.: W304999070N-veiling Genset 20 KVA

Condition: used, New: Yes Empty weight: 159 kg Type number: HDG88 HDG88 Frequency 50 Hz Rated Power 6.3 kva 230V Max. Power 7.9 kva 380V Tension 400 | 230 V Current 14 (380) / 23 (220) A Plugs 1xPCE5p (380) / 1x32A(220) Display LED5 Tank Capacity 14 L Running Time 50% load 13 h Noise Level 7 Mts; 50% load 77 dBA DC Output 13 mm DC Output 12 / 8.3 V/A Battery 36 Ah Engine Type Diesel Model HDG88 Power Output 14 HP Start method Electric Displacement 498 cc Oil Capacity 1,65 L Alternator A6T Rated Power 7kW / 8kW Power Factor 1 Voltage Regulation AVR / Brush Net Weight 172 kg Fedpfxjxlv S De Aabjgh Gross Weight 182 kg OEM : HDG88 Article nr.: HDG88-veiling Genset Hyundai HDG88 8KVA 14HP

Condition: used, Year of construction: 2016, operating hours: 3,571 h, JCB 535-125 Hi Viz 4x4x4 telehandler from year 2016 with only 3,571 operating hours! ----* Manufacturer: JCB * Model: 535-125 Hi Viz 4x4x4 * Year of manufacture: 2016 * Read operating hours: approx. 3,571 * Lifting capacity: 3,500 kg * Lifting height: 12.5 meters * CE certified machine * Protective grille * Video available upon request * In good condition! * Bucket available at extra cost * Price: €33,900 net + 19% VAT ----For further questions please call: For more information, please call: Erik Kortum: WhatsApp Kai Kortum: WhatsApp Fgjdpfxjxlmfns Aaboh All information provided without guarantee or liability. Subject to errors and prior sale.

Year of construction: 2023, condition: used, General information Fgodpexk Tkzofx Aaboh Field of application: Freight transport Drivetrain Make of engine: Honda Functional Lifting capacity: 2 kg History Number of owners: 1 Condition General condition: very good Technical condition: very good Visual appearance: very good Other information Hydraulic outreach: 2100 cm Latest inspection: 2024-09-02 Production country: DE Additional information Please contact Michael Overmeer for more information Böcker Junior HD 21 Hybrid Furniture Lift construction year 08-2023 with only 31 hours from the first owner. Lift is like new (has always been inside when not in use) and can operate fully electrically or with the Honda petrol engine. Lift is equipped with a aluminium basket and a storage box. Changes, writing and typing errors reserved.

Condition: used, Serial number: MS410HS-23E-1xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21476 Specifications: 665 kg S50 attachment Oil Flow: 70-90 l/min Ready for delivery Fsdoxivu Hepfx Aabsgh Description: We have an MSB corporation MS410HS Spike hammer w/ S50 attachment for sale. The spike hammer has hardly been used, max 10 hours according to the owner. Everything works as it should. Ready for delivery Own weight: 665 Model: corporation MS410HScorporation MS410HS

Condition: used, Year of construction: 2018, operating hours: 2,841 h, Wacker Neuson DW90 Dumper from year 2018 with only 2,841 operating hours! ---- * Manufacturer: Wacker Neuson * Model: DW90 * Year of manufacture: 2018 * Read operating hours: approx. 2,841 * Full cab * Air conditioning - A/C * Front camera * Operating weight: approx. 5,465 kg * Payload: 9,000 kg * Power: 55 kW Fgedpsxit Iqsfx Aabjh * Good condition * More photos and video available on request (WhatsApp) * Price: 19,900 euros, net + 19% VAT ----For further questions, please call: Erik Kortum: WhatsApp Kai Kortum: WhatsApp All information without guarantee or warranty. Subject to errors and prior sale.

Condition: used, Year of construction: 2020, operating hours: 1,778 h, Wacker Neuson DV60 Dual View Dumper, year 2020, with only 1,778 operating hours! ----* Manufacturer: Wacker Neuson * Model: DV60 * Year of manufacture: 2020 * Recorded operating hours: approx. 1,778 * Operating weight: 4,733 kg * Payload: 6,000 kg * Swivel skip * Air conditioning (A/C) * Swivel skip * Dual View (rotatable driver's seat) * Excellent tires! * Deutz diesel engine * Good condition! * Further photos and video available on request (WhatsApp) * Price: €36,900 net + 19% VAT ----For further questions, please call: Fgodpfx Aaoxhaxasbeh Erik Kortum: WhatsApp Kai Kortum: WhatsApp All information is provided without guarantee, subject to errors and prior sale.

Condition: used, Year of construction: 2021, Equipment: ABS, As-new and very well-maintained 18 t MAN TGM 18.290 TG3 construction machine transporter with automatic transmission, air conditioning, rear axle air suspension, Möller transport system 7.3 m, fitted with hydraulic loading ramps for construction machine transport, direct from first owner, operated under a MAN maintenance contract, only 24,510 km. Truck specification: First registration: 07.03.2022 Mileage: approx. 24,540 km 213 kW / 290 HP Short CC cab Euro 6 D engine Drive: 4 x 2 Wheelbase: 5,425 mm MAN TipMatic 12.12. OD automatic gearbox Gearbox function: MAN Idle Speed Driving Driving program: MAN TipMatic Efficiency Front axle leaf-sprung, rear axle air-suspended Rear axle differential lock Front axle load: 7,500 kg, rear axle: 11,500 kg Technical rear axle capacity possible: 12,000 kg Stabilizers: front and rear axles Shock absorbers: front and rear axles Axle ratio: i=4.11 Emergency brake assist Disc brakes: front and rear axles Emergency braking assistant EBA Lane departure warning LDW EBS with ABS and ASR ESP MAN EasyStart hill-hold function Lane departure warning LDW Air conditioning Cruise control Sun visor Multifunction steering wheel 220 L fuel tank 2 LED beacon lights on cab roof 2 work lights on cab roof LED daytime running lights LED side marker lamps 2 LED contour lights Electrically adjustable and heated exterior mirrors Electric windows Driver comfort seat, air-suspended, with lumbar support and shoulder adaptation MAN 7" media system German vehicle, first owner Excellent and well-maintained condition Vehicle operated under MAN maintenance contract Regular service records available Fjdpexharmsfx Aabjgh Möller transport system specification: Construction machine transport body approx. 7.30 m long x 2.48 m wide Aluminum side boards approx. 0.40 m high, length approx. 5,600 mm up to slope 2 hydraulic rear loading ramps Fully hot-dip galvanized, reinforced for load bearing Tapered outer frame with continuous perforations for load securing, usable as lashing points, certified to DIN-EN 12640, up to 2,000 kg Additional 8 x Thiele lashing eyes integrated into the outer frame Aluminum forklift collision protection, bolted to side of frame Floor made of grating for high point load resistance Fixed bulkhead with steel frame and aluminum profiles, 800 mm high Bulkhead fitted with holders for load securing equipment 8 mm phenolic coated board in front of bulkhead as wear protection Stake system - Kinnegripp Fixed front corner posts 2 removable and folding intermediate posts each side (right & left) 2 lockable stainless steel toolboxes, approx. 600 mm x 600 mm x 300 mm 2 LED work lights in bulkhead, protected, switchable from cab 2 support plates with straps in single holders Second axle mudguards, half-shell plastic with mudflaps Constant pump 40 L/min Aluminum hydraulic tank 60-80 liters 1 pair of hydraulic foldable ramps mounted at vehicle rear 2-part approx. 2,300 mm + 600 mm length, approx. 1,250 mm wide, hydraulically foldable, grating type Ramp control via separate control block at protected position on vehicle rear right 2 pairs of additional foldable rear supports Ball-type coupling + 12 V Internal vehicle no.: 2575 Price NET plus 19% VAT. Attractive financing options available on request. All information without guarantee. Subject to errors and prior sale.

Condition: used, Year of construction: 2021, Equipment: ABS, As-new and very well-maintained 18 t MAN TGM 18.290 TG3 construction machine transporter with automatic transmission, air conditioning, rear axle air suspension, Möller transport system 7.3 m, fitted with hydraulic loading ramps for construction machine transport, direct from first owner, operated under a MAN maintenance contract, only 24,510 km. Fodpfx Ajxhar Tsabsgh Truck specification: First registration: 07.03.2022 Mileage: approx. 24,540 km 213 kW / 290 HP Short CC cab Euro 6 D engine Drive: 4 x 2 Wheelbase: 5,425 mm MAN TipMatic 12.12. OD automatic gearbox Gearbox function: MAN Idle Speed Driving Driving program: MAN TipMatic Efficiency Front axle leaf-sprung, rear axle air-suspended Rear axle differential lock Front axle load: 7,500 kg, rear axle: 11,500 kg Technical rear axle capacity possible: 12,000 kg Stabilizers: front and rear axles Shock absorbers: front and rear axles Axle ratio: i=4.11 Emergency brake assist Disc brakes: front and rear axles Emergency braking assistant EBA Lane departure warning LDW EBS with ABS and ASR ESP MAN EasyStart hill-hold function Lane departure warning LDW Air conditioning Cruise control Sun visor Multifunction steering wheel 220 L fuel tank 2 LED beacon lights on cab roof 2 work lights on cab roof LED daytime running lights LED side marker lamps 2 LED contour lights Electrically adjustable and heated exterior mirrors Electric windows Driver comfort seat, air-suspended, with lumbar support and shoulder adaptation MAN 7" media system German vehicle, first owner Excellent and well-maintained condition Vehicle operated under MAN maintenance contract Regular service records available Möller transport system specification: Construction machine transport body approx. 7.30 m long x 2.48 m wide Aluminum side boards approx. 0.40 m high, length approx. 5,600 mm up to slope 2 hydraulic rear loading ramps Fully hot-dip galvanized, reinforced for load bearing Tapered outer frame with continuous perforations for load securing, usable as lashing points, certified to DIN-EN 12640, up to 2,000 kg Additional 8 x Thiele lashing eyes integrated into the outer frame Aluminum forklift collision protection, bolted to side of frame Floor made of grating for high point load resistance Fixed bulkhead with steel frame and aluminum profiles, 800 mm high Bulkhead fitted with holders for load securing equipment 8 mm phenolic coated board in front of bulkhead as wear protection Stake system - Kinnegripp Fixed front corner posts 2 removable and folding intermediate posts each side (right & left) 2 lockable stainless steel toolboxes, approx. 600 mm x 600 mm x 300 mm 2 LED work lights in bulkhead, protected, switchable from cab 2 support plates with straps in single holders Second axle mudguards, half-shell plastic with mudflaps Constant pump 40 L/min Aluminum hydraulic tank 60-80 liters 1 pair of hydraulic foldable ramps mounted at vehicle rear 2-part approx. 2,300 mm + 600 mm length, approx. 1,250 mm wide, hydraulically foldable, grating type Ramp control via separate control block at protected position on vehicle rear right 2 pairs of additional foldable rear supports Ball-type coupling + 12 V Internal vehicle no.: 2575 Price NET plus 19% VAT. Attractive financing options available on request. All information without guarantee. Subject to errors and prior sale.

Condition: used, Year of construction: 2021, operating hours: 10,069 h, Internal vehicle no.: FG52294 German vehicle Available immediately at our yard in Kaufungen - Kassel More INFO from Luis Lucena 4x identical VOLVO A25G dumpers available ---- 22.7 tons Year of manufacture: 2021 From 9,500 to 10,000 operating hours From 127,847 to 140,000 km Reversing camera Financing example: * Internal number: FG52294 * Purchase price: €141,900.00 Fgodpfxjxgk Iio Aabjh * Down payment: 10% * Term: 60 months * Monthly installment: €2,222.49 * Final value: €28,380.00 If you are interested in this offer or would like it customized to your needs, please contact us (Mr. Enchev). We look forward to your call. Subject to errors and prior sale. We are happy to accept your used vehicle as part exchange. Financing available directly from us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian. ----.

Condition: used, Year of construction: 2021, operating hours: 10,069 h, Internal vehicle no.: FG52294 German vehicle Available immediately at our yard in Kaufungen - Kassel More INFO from Luis Lucena 4 identical VOLVO A25G dumpers available Fgsdpjxgk Icsfx Aabjh ---- 22.7 tons Year of manufacture: 2021 Operating hours: from 9,500 to 10,000 Mileage: from 127,847 to 140,000 km Reversing camera Financing example: * Internal number: FG52294 * Purchase price: €141,900.00 * Down payment: 10% * Term: 60 months * Monthly installment: €2,222.49 * Residual value: €28,380.00 If you are interested in this offer or would like it adapted to your requirements, please contact us (Mr. Enchev). We look forward to your call. Errors excepted. We are happy to accept your used vehicle in part exchange. Financing available directly through us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian. ----.

Condition: used, Year of construction: 2022, operating hours: 76 h, Komplet Krokodile shredder, year of manufacture: 2022, hours: only 78h!, weight: 15,000 kg, crawler undercarriage, throughput up to 200 t/h, radio remote control, shaft length: 1,500 mm, output grain size: 60–150 mm, magnetic separator, diesel engine: [160 kW/220 hp], in very good condition, immediately operational! Transport dimensions: Fjdpfexf Rpqjx Aabegh Height: 2,290 mm Width: 2,200 mm Length: 6,900 mm Leasing and financing options available on request. Mr. Mihm (Tel.) will be happy to assist you. More information can be found on our website. Subject to prior sale and errors!

Condition: used, mileage: 1,001 km, gearing type: other, fuel type: diesel, color: red, first registration: 01/1990, Year of construction: 1990, driver cabin: other, Vehicle location: Bovenden, Superstructure: towable vibratory roller, 2-cylinder engine! The exact year of manufacture and model cannot be determined as there is no longer a type plate present! Fgodpfsxf I Rxjx Aabjh Accessories information without guarantee, subject to changes, interim sale, and errors excepted!

Year of construction: 2021, condition: used, Serial number: 21011xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21395 Specifications: Manufactured in 2021 Pumped approx. 4,500 cubic meters Remote control included Hoses and pipes included Weight: 2,950 kg Recently tested Fsdexfy Uvepfx Aabegh Watch video Description:Putzmeister stationary concrete pump.The pump is well-suited for tunnel work or indoor construction.It comes with hoses, pipes, and clamps. Two remote controls are included, one of them wireless.Recently used and tested by the owner, with no known issues.Available for quick delivery. Own weight: 2950 Model: BSA 1005 D5

Condition: used, Year of construction: 2008, operating hours: 34,191 h, Volvo A40E, Dumper Operating hours: 34,191 h (according to meter reading) * Mileage: 267,074 km * Powered by a 16L 6-cylinder Volvo diesel engine with 350 kW / 476 hp * Maximum speed: 57 km/h * Automatic transmission, single cab * Wheel configuration: 6x6 * Wheelbase: 1st–2nd axle: 4,550 mm; 2nd–3rd axle: 1,650 mm * Tyre size: 29.5 R 25, tread depth 15–30 mm * Body capacity: 24,700 litres (heaped) * Overall dimensions (L x W x H): 11,820 x 3,570 x 3,760 mm * Payload: 39,000 kg * Unladen weight: 30,200 kg * Cab with pressurised ventilation, air conditioning, camera, central lubrication, tailgate, body heating, * Heated seat * ID 2001 This description does not constitute a binding offer and may contain errors. No warranty for any information provided. Please also visit our homepage ---- Fgsdjxfx E Tspfx Aabsh

Condition: used, Year of construction: 2008, operating hours: 32,583 h, Volvo A40E, Dumper Operating hours: 32,583 h (read from meter) * Powered by a 16L 6-cylinder Volvo diesel engine with 350 kW / 476 hp * Maximum speed: 57 km/h * Automatic transmission, single cab * Drive configuration: 6x6 * Wheelbase: 1st-2nd axle 4,550 mm; 2nd-3rd axle 1,650 mm * Tire size: 29.5 R 25, tread depth 19-32 mm * Body capacity: 24,700 liters (heaped) * Overall dimensions (L x W x H): 11,820 x 3,570 x 3,760 mm * Payload: 39,000 kg Fgodpfxexfx Hke Aaboh * Unladen weight: 30,200 kg * Features: pressurized cab ventilation, air conditioning, camera, central lubrication, tailgate, body heating, seat heating, mirror heating, reversing camera * ID: 2099 This description does not represent a binding offer and may contain errors. No guarantee for the accuracy of all information provided. Visit our homepage ----

Condition: used, Year of construction: 2018, operating hours: 1,427 h, CAT 239D skid steer loader from 2018 with only 1,427 operating hours! ---- * Manufacturer: CAT Fsdpfexfpa Isx Aabsgh * Model: 239D * Year of manufacture: 2018 * Displayed operating hours: approx. 1,427 * Enclosed cab * Heating * 4-in-1 bucket * Auxiliary hydraulics * Rear-view camera * CE certificate available * Good condition * More photos available on request * Additional videos available on request * Price: €32,900 net + 19% VAT ---- For further questions please call: Erik Kortum: WhatsApp Kai Kortum: WhatsApp All information is subject to change, errors excepted, and prior sale reserved.

Condition: used, Year of construction: 2017, operating hours: 2,845 h, JCB 535-95 Telehandler from 2017 with only 2,845 operating hours! * Manufacturer: JCB * Model: 535-95 * Year of manufacture: 2017 * Recorded operating hours: approx. 2,845 * Lift height: 9.5 meters * Load capacity: 3,500 kg * Including pallet forks * Piped for attachments * Protective grille * Operating weight: 8,700 kg * Bucket available at extra cost * Additional photos available upon request * Video available upon request * Price: €36,900 net plus 19% VAT For further questions, please call: Fodsxfpbfopfx Aabjgh Erik Kortum: WhatsApp Kai Kortum: WhatsApp All information subject to change, errors and prior sale excepted. No guarantee or warranty on the provided details.

Condition: used, Year of construction: 2017, operating hours: 2,567 h, JCB 535-125 Hi Viz 4x4x4 Telehandler from year 2017 with only 2,567 operating hours! ---- * Manufacturer: JCB * Model: 535-125 Hi Viz 4x4x4 * Year of manufacture: 2017 Fedpfsxfpblox Aabsgh * Recorded operating hours: approx. 2,567 * Last service at approx. 2,355 operating hours! (11/2024) * Lifting capacity: 3,500 KG * Lifting height: 12.5 meters * CE certified machine * Piped hydraulics * Safety grille * Reversing camera * Video available on request * Good condition! * Buckets available at extra cost * Price: 36,900 Euros, net plus 19% VAT ---- For further inquiries please call: Erik Kortum: WhatsApp Kai Kortum: WhatsApp All details are subject to change and non-binding, errors and prior sale excepted.

Year of construction: 2004, condition: used, Field of application: Freight transport Make of engine: Honda Lifting capacity: 3 kg Number of owners: 1 Fsdoxfgvyepfx Aabsgh Hydraulic outreach: 2700 cm Production country: DE Please contact Michael Overmeer for more information Böcker Arriva HD27K lift, construction year 2004 from the first owner. Lift is powered by a Honda gasoline engine and has among other things: cable remote, hydraulic wheel drive, integrated bend rail, storage box. Changes and writing and typing errors reserved.

Condition: used, Year of construction: 2015, operating hours: 3,282 h, Bergmann 1200 Wheel Loader Dumper Excellent condition..... Weights / Skip Capacity Payload: 2,000 kg Unladen weight: 1,620 kg Skip capacity (level): 0.9 m³ Skip capacity (heaped): 1.3 m³ Skip system: Hydraulic rotary tipper Dimensions Height with ROPS bar: 2,600 mm Height without ROPS bar: 1,640 mm Total length: 3,120 mm Overall width: 1,420 mm Ground clearance: 240 mm Drive Hydrostatic all-wheel drive via four wheel motors Twin-lock control (differential lock) Infinitely variable 0–23 km/h Fgsdpfxoxffkvs Aaboh Steering Hydraulic articulated steering with emergency steering functionality Articulation angle: 35° left & right Axles / Brakes Front axle rigid, rear axle oscillating ±12°, maintenance-free oil-immersed disc brakes with automatic adjustment integrated in the front axle wheel motors, hydraulically activated parking brake on the front wheels Engine Water-cooled 3-cylinder Kubota diesel engine Power: 18.5 kW, Speed: 3,000 rpm Tires Standard, all drive wheels: 10.0/75×15.3 AS pattern Capacities Fuel: 33 L Hydraulic oil: 37 L Electrics 12 V electrical system with master switch, gauges for engine coolant temperature, fuel level, and hour meter, warning lights for engine oil, parking brake, direction indicator, battery charging indicator, signal horn Standard Equipment Adjustable driver's seat, tow coupling, lighting system in accordance with StVZO, skip made from wear-resistant fine-grain steel,

Condition: used, Year of construction: 2021, operating hours: 1,381 h, JCB 3CX Backhoe Loader from 2021 with only 1,381 operating hours! ----* Manufacturer: JCB * Model: 3CX * Year of manufacture: 2021 * Recorded operating hours: approx. 1,381 * Telescopic excavator arm * CE mark * Made in UK / Built in Great Britain! * 4-in-1 bucket * Pallet forks * Ditching bucket Fedoxd Nnispfx Aabegh * Good condition! * More photos available on request * More videos available on request (WhatsApp) * Price: €54,900, net plus 19% VAT ----For further questions, please call: For more questions please call: Erik Kortum: WhatsApp Kai Kortum: WhatsApp All details provided without guarantee or warranty. Errors and prior sale excepted.

Condition: used, mileage: 1,271 km, gearing type: automatic, fuel type: electric, color: red, overall weight: 3,025 kg, empty load weight: 2,340 kg, maximum load weight: 1,500 kg, lifting height: 3,010 mm, number of seats: 1, first registration: 11/2014, emission class: none, suspension: other, Year of construction: 2014, operating hours: 1,271 h, total length: 2,580 mm, driver cabin: other, construction height: 2,060 mm, fuel: electricity, load capacity: 1,500 kg, Purchase or trade-in of: - Vans - Forklifts - Commercial vehicles - Special vehicles - Fleets Other services: - Various loading options - Registration service - Delivery within Germany available for an additional charge Inspections are possible without appointment: Mon. - Fri.: 08:00 to 17:00 Sat.: 09:00 to 14:00 Address: Hauptstr. 90 76865 Rohrbach (Pfalz) Phone: Email: For more information please visit Fgedpfxsxd H Els Aabeh We speak German / English / Russian / Italian / French / Spanish More Information Sale only to businesses (agriculture, freelancers, small and large enterprises) or export. Subject to errors and prior sale.