Iberus Polska Marcin Rogacewicz

Condition: used, machine/vehicle number: 006385, Max. machining width: 1000 mm Kdodpfoybawkex Adwsg Min. machining thickness: 3 mm Working Table: Fixed pass height No. Operating units: 2 Nr

Condition: excellent (used), functionality: fully functional, grinding width: 1,350 mm, overall weight: 5,500 kg, working height: 880 mm, Wide belt sanding machine with cross and longitudinal unit for sanding, among other things, veneer before lacquering. The machine is fully functional, well-maintained, and in very good technical condition. The conveyor belt has been renewed. Sanding width: 1300 mm Working height: 880 mm constant Workpiece thickness max.: 3–140 mm Transport bed: with individual conveyor belts Drive: 3.0 kW three-phase motor, including extraction device Feed speed: 4.5–22 m/min, adjustable Units: cross/longitudinal/brush Brush roller unit: centrally height-adjustable Diameter: 150 mm Drive power: 1.5 kW Brush material: fibre Kdedpeya I Riofx Adweg 1. Cross sanding unit - Wear-free brake system - Pneumatic belt tensioning - Belt run monitoring - Pressure lamella belt system, intermittent belt cleaning device - Sanding belt dimensions: 4900 x 150 mm - Belt sanding speed: 12 + 24 m/s - Drive power: 13 / 17 kW 2. Longitudinal sanding unit - Infinitely variable electronic control of sanding belt speed via frequency inverter - Wear-free brake system - Pneumatic belt tensioning - Intermittent belt cleaning device - Belt control: infrared - Sanding belt in counter-rotation - Sanding belt dimensions: 2620 x 1350 mm - Belt sanding speed: 0.3 – 12 m/s - Drive power: 11 kW Graphical operating terminal for entering machine settings, including numerical thickness adjustment as well as fault source, workpiece passage, and feed speed display Electronically controlled pressure beam Roller spacing: 40 mm Pneumatic belt tensioning The contact surfaces of the pressure beam automatically adapt to the shape of the workpieces passing through Weight approx. 5500 kg Space requirement approx. 2550 x 2675 x 2400 mm

Condition: excellent (used), functionality: fully functional, grinding width: 1,350 mm, overall weight: 4,200 kg, Fine and smoothing sanding machine Heesemann, model: FGA 6 For intermediate lacquer sanding, wood surface smoothing, and sanding of foils The machine is fully functional, well maintained, and in very good technical condition. The conveyor belt has been replaced. Sanding width: 1300 mm Working height: 880 mm, constant Maximum workpiece thickness: 3–80 mm Transport bed: with individual transport belts Drive: 2.5 kW three-phase motor, including blow-off unit Feed speed: 4.5–22 m/min, adjustable Units Brush roller unit: centrally height-adjustable Diameter: 150 mm Drive power: 1.5 kW Bristle material: Fibre Longitudinal sanding unit Continuous electronic adjustment of the sanding belt speed via frequency inverter Wear-free brake unit Pneumatic belt tensioning Intermittent belt blow-off device Infrared belt control Counter-rotating sanding belt Sanding belt dimensions: 2620 x 1350 mm Belt sanding speed: 0.3–12 m/s Drive power: 11 kW Graphical operator terminal for inputting machine settings, including numeric thickness adjustment and displays for fault sources, workpiece throughput, and feed speed Electronically controlled pressure beam Control roller spacing: 40 mm Pneumatic belt tensioning The pressure beam's contact surfaces automatically adjust to the shape of the passing workpieces Workpiece vacuum hold-down system: Fan with 5.5 kW drive power Operator side and terminal: left Operating voltage: 400 V, 50 Hz Space requirements: 2550 x 2220 x 2300 mm Weight approx.: 4200 kg (Technical specifications are subject to change and errors, as well as prior sale.) Kdedpfx Adjya I Iuowjg

Condition: excellent (used), Year of construction: 2006, BOERE Sandrite 1100 KC Sanding machine. Year of Manufacture - 2006. £8,450 + VAT Ex-Works. Kdsdpfx Adoya Ilaswsg 2 x Main motors. Pneumatic belt tension. Maximum Workpiece: 150mm Belt size: 1110 x 1900mm Feed Speed: 4.4M/Min Machine is connected and available for any demonstration.

Condition: good (used), Year of construction: 2020, functionality: fully functional, working width: 1,350 mm, Wide belt sanding machine for woodworking Manufacturer: Viet, Model: SV3-4.3 RVXR Year of manufacture: 2020 Technical Data Manufacturer: Viet Italia S.r.l. Model: SV3-4.3 RVXR Year: 2020 Belt width: 1350 mm Maximum working height: 160 mm Machine with adjustable head (fixed working height of 900 mm) Kodpfx Ajya Eyhsdwjdg Feed speed: 1.1 kW (1.5 HP) Speed: 0.5–7 m/min Calibration sanding unit, sanding drum diameter: 190 mm Belt length: 2620 mm Dimensions: approx. W 2.2 x D 3.5 x H 2.5 m (+ dust extraction) Weight: 6.5 t (+ dust extraction) Features – Machine with movable head – Sanding belt change on the left side – Tool set – Digital thickness display – Material too strong at the infeed – Electropneumatic oscillation control – Air filter with condensate separator and automatic drain – Maintenance-free pneumatic system – Pneumatic lifting and lowering when switching sanding units on or off – Machine with head adjustment (fixed working height 900 mm) – Lifting system on 4 columns (spindle) with chain drive – Table extension front and rear, each with 1 roller – Industry 4.0 (LAN) package with LAN network connection – Centessimal lifting system with inverter – Electromechanical grit set – Belt speed adjustable via frequency inverter – V-Spin unit with 15-disc sanding system / diameter 80 mm The V-Spin unit consists of 15 disc brushes arranged in line and moving in opposite directions. The combination of both movements makes the V-Spin unit suitable for rounding sharp edges and removing slag or oxides. – 16 support plates for V-Spin unit, diameter 80 mm Scotch-Brite + abrasive, grit 80 – 16 support plates for V-Spin unit, diameter 80 mm Tampico + grit 80 – X-Spin unit / sanding system with 15 discs, diameter 123 mm Group consists of 5 rotary heads, each fitted with 3 rotating sanding brush pads, each diameter 123 mm – Oscillating Scotch-Brite brush – Linear cleaning systems – Conveyor belt Conveyor made of HYPALON rubber, heat and oil resistant, hardness 60 SH, smooth surface – Belt cleaning blower for the transport belt incl. extraction – IPC MONITOR 15" touch-screen control for machine operation, up to a maximum of 10 processing units – 2 Euro pallets filled with new sanding belts – Technical documentation including operating manual The control system manages the following processes: - Start sequence of selected drive motors - Storage of up to 1000 processing programs - Automatic positioning of thickness control - Acoustic and visual notifications at machine startup - Operating hours counter - Automatic control of feed speed depending on processing capacity (indicated in sqm). This functionality enables increased sanding belt lifetime through the use of statistics. Extraction Unit - Manufacturer: Ringler, Kärcher Group - Model: RE 36/110 D11 IE3 - Output: 11.0 kW - 2930 rpm - Connection: 400 V / 19.54 A / 50 Hz - Year: Dec 2018 - Weight: 754 kg All information without guarantee. A demonstration is possible anytime in our showroom.

Condition: ready for operation (used), Year of construction: 2001, Ott Deltatronic Wide Belt Sander €9,500.00 excl. VAT Ott Deltatronic Magelis control system Sanding thickness: 3-160 mm Sanding width: 1350 mm 3 units Lacquer sanding package Vacuum Satin finishing brush Cleaning brush Pneumatic slider Year of manufacture: 2001 Kedpsyatgisfx Adwsdg Condition: Fully functional

Condition: excellent (used), Catalogue number 7871 TECHNICAL DATA - Maximum workpiece width: 1300mm - Maximum workpiece height: 170mm 2 sanding units: 1) Grooved rubber roller for calibration 2) Grooved rubber roller + segmented shoe + metal roller – From above: 2 pressure feed rubber rollers Kdjdpfx Adsx U Urqswog First unit: - Pressure rubber roller Second unit: - Pressure rubber roller - Cleaning brush - Pressure rubber roller – From below: - 3 slip rubber rollers - Conveyor belt - 3 slip rubber rollers - Pneumatic belt oscillation with photoelectric sensors - Electric table elevation - Pneumatic brake - Stepless feed speed adjustment via gear motor - Vacuum pump - Main motor: 15kW - Feed motor: 1.5kW - Pump motor: 4.6kW - Working pressure: 6-8bar - Extraction port diameters: 2x150mm, 2x80mm, 4x70mm, 120mm - Overall dimensions (L/W/H): 1700x2250x2400mm + pallet - Transport dimensions (L/W/H): 1700x2250x2140mm + pallet - Weight: approx. 2000kg ADVANTAGES – Made in Italy – 2 sanding units – Segmented shoe – Vacuum pump – Not repainted – Used sander, in very good condition Net price: 39,900 PLN Net price: 9,500 EUR (depending on the exchange rate of 4.2 EUR) (Prices may change with significant fluctuations)

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, working width: 1,300 mm, workpiece height (max.): 140 mm, controller model: Xinje XD5, empty load weight: 4,500 kg, working length: 200 mm, TECHNICAL DETAILS 1st Station: 15 cup grinding brushes with quick-change mount 2nd Station: 15 cup grinding brushes with quick-change mount 3rd Station: 9 tangentially arranged grinding brushes 4th Station: Crosswise roller with grinding brushes over the entire working width 5th Station: Crosswise roller with grinding brushes over the entire working width 6th Station: Air nozzle across the entire working width Working width: 1,300 mm Working length: 200 mm Workpiece height: 3 - 140 mm MACHINE DETAILS Control system: Xinje XD5 Total power requirement: 13.4 kW Kodpfx Ajx Tt Uuedwsdg Dimensions & Weight Required floor space: approx. 5.1 x 2 x 2.3 m Machine weight: approx. 4,500 kg EQUIPMENT Modular control of the module units Frequency converter for speed control Automatic adjustment of working height range Oscillating blowing air in the final section Easy maintenance and replacement of abrasive paper and brushes Spare brushes Grinding inserts Rubber conveyor belt with herringbone pattern, solid steel plate underneath across full width

Condition: used, Year of construction: 1998, Used machine Year of manufacture: 1998 1 Belt sanding machine with combination unit with electronic segmented pressure beam for sanding of soft and hard veneers Calibrating and fine sanding of solid wood Calibrating workpiece carrier boards Sanding of defective veneers and coatings Intermediate sanding of PU, hydro, UV, nitro, and polyester lacquers Kedpfx Aox Rpghedwodg Sanding of blocking foils with graphical control terminal NC-controlled thickness adjustment from 3-150 mm Calibration roller can be switched on via terminal with patented CSD segmented pressure beam to compensate for workpiece tolerances up to 2 mm Sanding width: 1350 mm Abrasive belt length: 2150 mm Abrasive belt speed, frequency controlled: approx. 2-18 m/sec Motor power (sanding unit): 15 kW Feed speed: 5/10 m/min Compressed air: 6 bar Compressed air requirement: 15 NL/min with belt cleaning air blast: 490 l/min Extraction port: 180 mm Air requirement sanding unit: 1800 m³/h Required air speed: 20 m/sec Total power connection: approx. 17 kW Weight: approx. 2500 kg Dimensions (WxDxH): 2090x1670x2020 mm Availability: short notice Location: Röllbach

Condition: good (used), Year of construction: 2008, functionality: fully functional, HESSEMANN 3-HEAD SANDER: Abrasive belt dimensions: 2,620 x 1,400 mm 1 Longitudinal sanding unit (with contact roller for calibration work (steel)) Roller diameter: 250 mm Belt speeds: approx. 18 m/s 22 kW Anti-wear braking unit, automatic band length adjustment Dust extraction system controlled depending on the workpiece, counter-rotating abrasive belt, abrasive belt grit compensation by computer Belt speeds: 1.0 - 18 m/s Drive: 15 kW 1 Longitudinal sanding unit Belt speeds: 1.0 - 18 m/s Kjdpfx Adsx Rdn Tewjdg Drive: 15 kW Includes continuously adjustable sanding speed via electronic frequency inverter, with double number of extraction holes for the dust extraction device. Anti-wear braking unit, automatic band length adjustment for abrasive belt edges potentially of different lengths; dust extraction controlled by workpiece detection, deactivatable, counter-rotating abrasive belt. 2 Pressure beams with selective pressure adjustment system – CSD® system Continuously adjustable individual pressure elements, for single and multiple workpiece feeding. Spacing: 32 mm. Tolerance compensation for workpieces up to 2 m by maintenance-free pressure magnets. Working width as well as start and end positions of the pressure beam are electronically adjustable. The pressure elements are driven by lifting electromagnets capable of continuously varying the force of each sanding pad as the workpiece passes through the machine. This innovative CSD® technology guarantees constantly proportionate pressure relative to pad overlap on the workpiece. The risk of sanding through on the edges is virtually eliminated by this dynamic, continuous pressure force control.

Condition: used, Wide belt calibrating sander Kedpfx Adjx N T Efewjdg Manufacturer: Viet Spa Italia Model: PL ICCC Year: 1995 Power: 54 kW Air pressure: 5–8 bar Weight: 6200 kg

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, Costa Planing Machine High-Performance Profiling Planer – Processing Centre with 10 spindles, used exclusively for processing spruce wood. Technical Features: - Working width up to 300 mm - Multi-stroke spindle system for flexible profiling and dimensional processing - Feed rate: 140 m/min to 200 m/min - NC control for precise, repeatable set-up and processing operations - All spindles equipped with support bearings (hydraulic clamping) for smooth operation, dimensional accuracy, and surface quality - Planing table in perfect condition, showing no signs of wear or damage - Precision work in terms of dimension and angle across the entire working width - The machine is in technically flawless condition and operates precisely and reliably. Spindle Configuration: Kodpsx N D Rrsfx Adwjdg - Horizontal spindle - Lifting spindle right, vertical - Lifting spindle left, vertical - Lifting spindle horizontal - Lifting spindle right, vertical - Lifting spindle left, vertical - Spindle top, horizontal - Spindle bottom, horizontal - Spindle bottom, horizontal - Levelling spindle bottom, horizontal This spindle arrangement enables complete machining of workpieces in a single pass with high dimensional accuracy and excellent surface quality.

Condition: ready for operation (used), Year of construction: 1994, Wide Belt Sander HEESEMANN KSM 8 CSD incl. EA2 Year of manufacture: 1994 Condition: used – ready for operation Description Wide belt sanding machine Condition: function-tested – Working width 1300 mm – Cross sanding unit with belt air-jet cleaning device – Longitudinal sanding unit with steplessly adjustable speed and belt air-jet cleaning device – Calibrating roller, controllable via control panel – Vacuum conveyor belt – feed speed steplessly adjustable – Satin finishing roller – Brush roller – Machine settings and pressure regulation system CNC-controlled - EA dedusting unit, high-pressure air-blast installation with rotating nozzles and ionization for statically charged dust Ksdpfsx N A Aajx Adwodg Location: ex customer site - Immediately available - Machine must be dismantled by the customer

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, total height: 2,200 mm, total length: 2,750 mm, working width: 1,350 mm, grinding width: 1,350 mm, overall weight: 3,580 kg, grinding height: 160 mm, type of input current: three-phase, grinding belt length: 1,620 mm, workpiece width (max.): 1,350 mm, Wide Belt Sander VIET Challenge 323B Specification: • Condition – used, after comprehensive inspection and calibration • Manufacturer – VIET • Model – Challenge 323B • Working width – 1350 mm • Sanding thickness range – 3-160 mm • 3 sanding units: - First: calibration roller made of hard rubber - Second: rubber roller made of lower hardness rubber, with jump-in/jump-out function - Third: soft rubber roller, also with jump-in/jump-out function • All rollers diameter: 240 mm • Possibility of working with jump-in operation on the 2nd and 3rd roller or in manual mode with fixed height setting • Main drive motors: 2 x 11 kW • Machine is operated via a touchscreen panel with memory for saving various programs and settings as required • Display with fault and error messages • Infinitely variable conveyor feed speed – variator • Electronic thickness indicator for processed elements Kodox Nw Spepfx Adwodg • Air-blast cleaning mechanism for sanding belts on 2nd and 3rd unit • End-switch controlled oscillation (reliable) • Conveyor belt in very good condition • Table extension rollers • Sanded material thickness gauge • Safety sensor preventing oversize material from entering • Original paintwork • Abrasive belt size – 2620 x 1380 mm • Extraction ports – 7 pcs. • Weight – 3,580 kg • Year of manufacture – 2002 • Complete Italian-language manufacturer’s documentation • Overall dimensions 270 x 225 x 220 cm (L x W x H) Additional information: • Perfect, factory technical and visual condition • The provided photos show the actual condition of the item for sale • Device can be switched on and fully tested on site

Condition: used, Year of construction: 2011, Used Machine Year of manufacture: 2011 WEBER LCE-2-1350 (DK) Compact Wide Belt Sander with two sanding belts, suitable for calibration, veneer, and intermediate lacquer sanding. Features a constant working height and is equipped as follows: Sanding Units: Contact Roller Unit · Grooved steel contact roller Ø 210 mm for precise calibration · Mechanical adjustment of the contact roller for grit compensation · Pneumatic lifting of the contact roller Combination Unit · Grooved rubber contact roller Ø 130 mm, 60 Shore hardness - mechanical adjustment for grit compensation · Pneumatic lifting of the contact roller · Electronically controlled sanding pad with ISA-System 22/22 ISA (Intelligent Sanding Pressure Adjustment) · Patented segmented pressure beam system with full tolerance compensation · Pressure shoe width: 22 mm (movable longitudinally and laterally) · Universal lamella with pinpoint actuation suitable for all sanding applications (no need to change sanding lamella between veneer and solid wood sanding) · Tolerance compensation: +/- 1 mm ISA-Control · High-resolution workpiece detection with a switching roller per pressure shoe · Free feeding of complex part shapes – multiple feeding with minimal lateral spacing · Sanding intensity individually adjustable at all edges · Sanding pressure adjustable via pressure regulator · Feed-controlled infeed and outfeed Drive · Sanding belt speed from 2–18 m/s for high material removal rates · Wear-free DC braking · Self-tensioning belt drive Belt Control · Automatic compensation of unequal sanding belt edge lengths · Optical, contactless, and self-cleaning sanding belt detection on the belt change side · Fine adjustment of oscillation on the belt change side · Belt run-off switches left and right Operator Terminal ‘SIEMENS’ MP 177 6” · Graphical user interface via 6” color display · Program memory for 18 programs · Parameter settings available via program Overthickness Protection · Safety bar at machine infeed with the following functions: · Automatic lifting of contact roller and segmented pressure beam · Feed shutoff Workpiece Feed · Rubber-coated and spring-loaded pressure rollers before and after the sanding station · Secure workpiece transport with multiple feeding ensured by pressure lamella with tolerance compensation · High-quality transport belt made of natural rubber · Infinitely variable feed speeds for calibration and fine sanding · 400 mm table extension at both infeed and outfeed with rollers Kodpfx Adox Hll Ejwedg Technical Specifications · Working width: 1350 mm · Sanding unit drive (frequency controlled): 1 x 15.0 kW Availability: Approx. April 2026 Location: Heidelberg

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Wide belt sanding machine, sander 1300mm Manufacturer: Ott Model: RSO-1300 Year: 1992 Kdodpfxex E Amqs Adweg Working width: 1300mm with roller 15 kW and pad 11 kW + brush Feed speed: 10 m & 20 m/min

Condition: used, Year of construction: 2001, functionality: fully functional, DMC US 1350 M2 Wide Belt Sander, year 2001 for sale! Kdjdpjx Ezwhsfx Adwsg

Condition: used, Year of construction: 2005, machine/vehicle number: A41213AC1, Technische Daten: - Hersteller: Costa - Typ.: SA TS 1350 - Baujahr: 2005 - Arbeitsbreite: 1.350 mm - Schleifbandmaß: 2.620 x 1.380mm - Schleifhöhen: 3-160m - Vorschubgeschwindigkeit: 5 -25m/min. - 1. Aggregat: - Längschleifaggragat - Bandmaße: 2620 x 1380mm Kdjdsx Ex Tmspfx Adwsg - Elektronischer Schleifschuh, System Costa - Tastrollenabstand: 32mm - Segmentbreite: 32mm - Motorleistung Antrieb, 11kW - Entstauberbürste Durchmesser: 180mm - Bedienseite: links - Höhenverstellung: motorisch - Vakuum Transportband - Gesamtanschluß 20KW / 43A - Breite: 1.924mm - Länge: 2.059mm - Höhe: 2.185 - 2.375mm - Absaugstutzen: D 2x100mm + 2x160mm - Volumenstrom: 4.830m³/h bei 24m/s - Druckluft: 6bar, 880NL/min. - Volt, Hz 400 / 50 - Spannungsschwankungen max. +/- 5 % - Gewicht 3.100kg - Standort, am Lager Blomberg

Condition: used, Year of construction: 2012, functionality: fully functional, Grinding unit with contact roller DIAGONAL unit with segmented sanding pads (35 mm segment width) 2 motors with 15 & 11 kW, 400V Pass-through height: 200 mm Constant working height (machine upper section adjustment) Abrasive belt dimensions: 1350 x 2000 mm Automatic thickness adjustment ENORMATIC PLC control with touch screen and operating hours counter Machine version for INTERMEDIATE LACQUER SANDING Pneumatic lifting/lowering of the contact roller Vacuum device complete with integrated fan Infinitely variable feed rate via touch screen Infinitely variable sanding belt speed and belt air blow-off on 2nd unit Kedpfx Asx Eh Svodwjdg Drive roller for sanding pads rubber-coated Machine dimensions approx. 1,800 x 1,800 x 2,100 mm (LxWxH) Weight approx. 2,800 kg

Condition: good (used), Code: 0260 Brand: DMC SCM GROUP Model: UNISAND 2000 - CE Standard Automatic wide belt sander with 2 longitudinal units and 1 transverse unit at the inlet for furniture, joinery, custom-made furnishings, panels, wooden doors, window frames, semi-finished products and various - CE Standard Technical data: Max working width 1350 mm Min working width 52 mm Min length 400 mm Min/max working height 4/170 mm Belt feed with variable speed motor Longitudinal abrasive belt length 1370 x 2620 mm Transverse abrasive belt length 150 x 6550 mm Lamellar belt length 140 x 6300 mm Automatic belt centring Automatic table positioning Digital display of working thickness Control panel with dustproof membrane keyboard Electronic system for belt oscillation Rubber-coated pressure rollers Automatic belt centring 1° Group: Transverse Sanding Pad with development 6550 mm and fitted with a lamellar belt, guarantee of stability and excellent abrasive belt tensioning Sectioned electronic pad "EPICS" with electronic control "HYDRA" with 46 sectors, with centre distance 30 mm A LED screen allows verification of the operation of the activated pad sectors The unit is equipped with blowers for cleaning the abrasive belt Kodpfx Adsx Dm Tvjwsdg 2-speed motor power 12/15 Kw Suction hood diameter 160 mm Combined longitudinal calibrating/sanding group with steel roller and sectioned electronic pad 46-sector "EPICS" with centre distance 30 mm Reading barrier 46-sector Abrasive belt dimensions 1370 x 2620 mm Roller diameter 220 mm Motor power 15/18,5 Kw Oscillating blowers with electronic control Sectioned electronic sanding pad "EPICS" with 46 sectors and centre distance 30 mm Reading barrier 46-sector Motor power 15 Kw Oscillating blowers Scotch Brite satin roller Diameter 150 mm Motor power 3 Kw Suction hood diameter 160 mm Vacuum table Electronic control HYDRA 35 Compressed air 8 bar Overall dimensions of assembled machine mm 3200 x 2,900 x 2400 h Overall dimensions for transport mm 3200 x 2300 x 2400 h Weight kg 4400

Condition: like new (used), working width 1350 mm, calibration unit with metal roller, combination unit with two rubber rollers and multi-segment pad, oscillation by photocells, machine function activation from control panel, belt blow-off, stepless feed speed regulation for sanding belt on 2nd unit, pneumatically controlled multi-segment pad with adjustment, year of manufacture 2007, electric table adjustment, material thickness gauge, vacuum under-table. Kdjdpfjx Daz Hsx Adwsg

Condition: used, Kündig Premium-2 1350 RP Quality product from Switzerland Constant Table Machine / Automatic Head Positioning Wide-Belt Calibration & Fine Sanding Machine 1st Unit: Grooved Rubber Contact Roller, 80 Sh Contact Roller Level Infinitely Adjustable According to Grit Scale Kdedpfx Adox A T Epowog 2nd Unit: Pneumatic Sanding Pad Unit Abrasive Belt Drive Motor Power: 15 kW Working Width: 1350 mm Maximum Workpiece Pass-Through Height: 200 mm Feed Speed: 3 - 15 m/min, Infinitely Adjustable Automatic Workpiece Thickness Setting ENORMATIC Quick Adjustment with Feed Activation (for long workpieces) PLC Control with Touch Screen and Teach-in Memory for Automation and Management of All Work Programs Infeed and Outfeed Tables with Roller Support Additional Foldable Outfeed Table Machine is KÜNDIG – FACTORY SERVICED First delivered in 2018 from training workshop / retirement Few operating hours Available ex stock Lieboch / Leasing option

Condition: used, machine/vehicle number: 008349, Max. machining width: 1300 mm Min. machining thickness: 100 mm Working Table: adjustable Kdodpfx Adex A Tfiswog Vacuum feed belt: yes No. Operating units: 3 Nr

Condition: used, machine/vehicle number: 007614, Max. machining width: 1300 mm Kodpfx Adex A Tatewedg Working Table: adjustable Vacuum feed belt: yes No. Operating units: 3 Nr

Condition: used, machine/vehicle number: 007613, Max. machining width: 1300 mm Min. machining thickness: 3 mm Working Table: adjustable Kdodpfx Asx A Tagjdweg Vacuum feed belt: yes No. Operating units: 3 Nr