Used Ott Profimatic for sale (78)

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: M/53056, total length: 9,800 mm, overall weight: 4,500 kg, compressed air connection: 6 bar, input voltage: 400 V, input frequency: 50 Hz, Single-sided edge banding machine in right-hand configuration - with jointing unit - gluing unit - double end cutting unit - flush trimming, chamfering, and radius milling unit - corner rounding unit - scraper and edge buffing unit with high-performance automation - pressure zone with one driven roller and six follow-up rollers - automatic edge thickness adjustment for all units - automated chamfer thickness adjustment of the top pressure to panel thickness - pneumatic engagement/disengagement of all processing units with monitoring - Machine in CE-compliant design with complete encapsulation of processing zones by high-quality noise protection hoods. Machine length: 9,800 mm Machine weight: 4,500 kg Ltodpfjxy Sizex Aanea Gluing unit - for hot-melt adhesive granules - with quick heating tank, preheating time: 6 minutes - electronic temperature control - adhesive application roller (no adjustment required for different material heights) - operates in both co- and counter-rotation, automatically activated via program control Edge thickness: 0.2 - 20 mm Workpiece dimensions: Minimum width: 60 mm Minimum height: 8 mm Maximum height: 60 mm Minimum length: 160 mm for strip edges / 60 mm for continuous roll edges / 150 mm with double end cutting unit Workpiece transport - heavy-duty chain conveyor with precision sliding guides for chain support plates with flat and round guide rails to ensure positive workpiece transport - feed speed: 12 - 20 m/min, adjustable via electronic frequency inverter from the central control panel, values can be saved in work programs - motor power: 5.5 kW Panel thickness adjustment Motorized adjustment of double roller top pressure, preselection via the central control panel, values can be saved in work programs Edge thickness adjustment - automatic positioning of all edge thickness-related units including the pressure zone, preselection via the central control panel, values can be saved in work programs Machine control - central control panel - PLC and line control for contactless control of the processing units Central control panel - for flexible and easy operation of the edge banding machine, with a specifically developed user interface for clear and rapid access to all important machine and unit statuses - intuitive menu navigation via two-line text display, supported by clearly arranged symbols with two-color LED status indicators PLC - high-performance PLC to industrial standards for fast and efficient interaction with the machine and for controlling all functional groups and line control Line control - high-resolution line control of all processing units with +/- 1mm accuracy over the full machine length - complete access via the control panel for all program-controlled processing units - values can be saved in various work programs EFU - electronic frequency inverter Connections Electrical: 3 x 400 V, 50 Hz, rated current 42 A, protection: 50 ampere, supply: 5-core, 5 x 10 mm², control voltage: 24 V Extraction: 1 x 120 mm, 1 x 160 mm, 1 x 120 mm, extraction air velocity: min. 20 m/sec, required capacity: approx. 65 m³/min Compressed air: 6 bar, 1/4" - consumption approx. 300 l/min, required minimum pressure: 4.5 bar, all workpiece blow-off lines are line-controlled.

Condition: used, Year of construction: 1994, operating hours: 5,373 h, functionality: fully functional, machine/vehicle number: M/6176, total length: 9,000 mm, total width: 1,400 mm, total height: 2,000 mm, overall weight: 4,000 kg, Edgebander Operating hours: 05373.33 h (read) Processing units: Upper pressure line KAM 4-2 01 Rapid heating tank KAM 4-61-02.01 Lower pressure line KAM 4-1-01 Edge feeding table KAM 4-4-01 Automatic Magazine for solid edges and foils Feed roller KAM K4-51-01 KAM travelling foil shear Cutting device model type K 17 Fixed milling machine KAM 4-50-00 model type NF 30.1 Fine milling machine KAM 4-26-80 Ljdpfswf U E Sex Aanjta Slot milling machine KAM 4-32-01 Rounding corners Grinding device Scraper unit Oscillating edge cleaning unit KE-0 Dimensions: approx. 9,000 x 1,400 x 2,000 mm Weight: approx. 4,000 kg

Condition: excellent (used), Catalogue number: 7808 TECHNICAL DATA Max. working width: 1100 mm Max. working height: 160 mm 2 Units: 1) Grooved rubber roller for calibration 2) Rubber roller + shoe + steel roller – Top section: 2 steel rollers, slip type Units: Ledpfexwyhtsx Aanjta Cleaning brush – Bottom section: Feed belt Pneumatic belt oscillation with photocells Electric table lifting 2 feed speeds: 1.1 kW Main motor: 15 kW with pneumatic brake Additional pneumatic shoe Operating pressure: 6-8 bar Extraction connection diameter: 2x160 mm, 1x120 mm Overall dimensions (L/W/H): 2700x2100x2200 mm Approximate weight: 3000 kg – German-made – 2 working units – Additional pneumatic shoe included – Unpainted – Used wide belt sander in very good condition Net price: 35,900 PLN Net price: 8,550 EUR (depending on exchange rate 4.2 EUR) (Prices subject to variation due to currency fluctuations)

Condition: used, Year of construction: 1997, Number of belts: 2-belt Max. working width: 1100 mm Min. working height: 3 mm Max. working height: 160 mm 1st belt: Calibration roller Diameter of 1st roller: 150 mm Design of 1st roller: grooved rubber roller 90 degrees Shore Sanding belt length of 1st unit: 1900 mm Sanding belt width of 1st unit: 1120 mm Sanding belt speed of 1st unit: 18 m/sec Drive of unit 1: 11 kW 2nd belt: Sanding unit shoe Sanding shoe of 2nd unit: electronic individual links 45 mm segment width Sanding belt length of 2nd unit: 1900 mm Sanding belt width of 2nd unit: 1120 mm Sanding belt speed 2nd unit: 18 m/sec Drive of 2nd units: shared motor with 1st unit with rigid sanding pad for solid wood and frame sanding. Lacquer sanding possible: No. Fixed feed speed: 5/10 m/min. Control: Hand control panel. Electric/pneumatic belt oscillation: Yes. Table lift: Electric. Table display: Digital. Operating pressure: 6 bar. Machine number: E / 79191. Dimensions: 1930 x 1700 x 1980 mm. Motor power: 12 kW. Extraction diameter: 2 x 150. Storage location: Nattheim. Ltsdpfjxq Aptex Aansa

Condition: excellent (used), Year of construction: 1993, max. edge thickness coils 0.2 - 3 mm max. edge thickness solid strips15 mm feed speed 12/ 18 m/min glue plot heating time approx. 6 min Ledpfjfbr S Rjx Aanjta autom. strip magazine coil magazine granulate heating pot flush trimming unit radius trimming unit operating panel extendable work piece support noice cancelation hood machine length 3800 mm Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Year of construction: 1994, condition: good (used), Finishing unit, buffing unit, modular unit, format processing unit, double-end tenoner, edge processing machine, plastering unit -Manufacturer: Paul OTT, Finishing unit from edgebanding machine U 206 Lsdpfju N Sggjx Aanjta -Type: KEO-04 -Motor: 0.3 kW -Speed: 1450 rpm - laterally adjustable -Height: adjustable -Number: 2 units available Price: per piece -Dimensions: 400/280/H660 mm / 480/290/H660 mm -Weight: 35 kg/ 36 kg

Condition: used, Year of construction: 2000, Ott Unimatic Edge Banding Machine, Reliable and good machine. Has a pre-milling. 4 diamond cutters as a gift. It can glue not only natural or plastic edging, but also strips up to 20 mm thick. Lodpfswh Rw Aox Aanota

Condition: used, Year of construction: 1968, 1 piece veneer press OTT JU 60-S 380V, 12kW, as per images and inspection Color: green Year of manufacture: 1968 Condition: used Payment method: advance bank transfer Ltsdpfex Ifpmjx Aanea Storage location: workshop Shipping: Pickup only – shipping is not offered for this item!

Condition: ready for operation (used), Year of construction: 1996, pressing force: 70 t, Main Drive Pressing force 686 Kn This OTT ST 1611/60 veneer press was manufactured in 1996. It features a maximum pressing force of 70 tons, pressing plates measuring 1300x1611 mm, and a power output of 10.1 kW. The plates are electrically heated, enhancing its efficiency. Consider the opportunity to buy this OTT ST 1611/60 veneer press. Contact us for more information. Ltsdsx D D Nnspfx Aanea Application Types Pressing / Laminating

Condition: used, Year of construction: 2001, Edge thickness 0.2 - 6 mm Workpiece dimensions Width min. 70 mm Height min. / max. 8 / 42 mm Length min. 150 mm (strip edges) Feed speed: 12 m/min Glue application roller Machine dimensions L x W x H = 3500 x 900 - 1300 x 1250 mm Weight: approx. 1130 kg Power consumption: approx. 6.0 kW, 400 V, 50 Hz Equipment: - Double top pressure with manual height adjustment - Automatic magazine for roll edges up to 800 mm DM - Rapid heating tank with application roller in synchronous and counter-rotating direction - Pneumatic adjustment and resetting of all work units - Pneumatic cross-cutting shears for strip edges up to 3 mm - Manually adjustable infeed ruler - Double cross-cut saw 2 HF motors 0.2 kW, 12,000 n 2 automatic Positions = 0 + 3 degrees - Milling/flush trimming unit with two HF motors 0.43 kW, 12,000 n. Two-sided scanning with two HF indexable cutter heads. Radius scraper, automatically controlled. Flat scraper, automatically controlled. Storage location: Nattheim Lsdevvkfqjpfx Aanota

Condition: excellent (used), Year of construction: 2002, edge seize 0,2 - 12 mm work piece dimension width min. 70 mm height min. / max. 8 / 42 mm length min 160 mm (strips) length min 60 mm from roll Durchlaufgeschwindigkeit: 12 m/ min glue coating with roller working height : 880 mm compressed air 6 bar,1/4 Zoll suction connection, DM 160 mm dimensions: L x W x H = 5600 x 950 x 1300 mm weight: ca. 2200 kg total conection: ca. 11,5 kW, 400 V, 50 Hz machine equipped with: Ltjdpfshy Tlrex Aanoa - double top roll pressure with electric height adjustment - autom. roll magazine for rolls up to 800 mm DM, pneumatic cutting up to 3 mm - autom. infeed fence - no adjustment of edge seize premilling aggregate with 2 HF-motors 1,5 kW, 12000 n double end trim unit - 2 HF-motors 0,2 kW, 12.000 n 2 autom. positions = 0 + 3 deg. flush trimming aggregate with 2 HF-motors 0,7 kW, 12.000 n radius trimming unit - with2 HF-motors 0, 3 kW, 12.000 n, radius scraping unit, autom. set in flat scraping unit Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: excellent (used), Catalogue number: 7549 TECHNICAL DATA Max width of workpiece: 1100mm Max height of workpiece: 170mm 2 units: 1) Grooved rubber roller for calibration 2) Rubber roller + pad + metal roller – from above: Metal roller, sliding Working unit Metal roller, sliding Unit with pad Output metal roller, sliding – from below: Feed belt Pneumatic belt oscillation Electric table lifting 2 feed speeds Motor: 11kW With pneumatic brake Working pressure: 6-8 bar Ltsdpfx Aaovxuxmjnsa Extractor outlet diameter: 2x150mm Overall dimensions (L/W/H): 1960x1700x2000mm Weight approx.: 2000kg – German manufacture – 2 units – not repainted – Used sander, very good condition Net price: 34,900 PLN Net price: 8,300 EUR at 4.2 EUR rate (Prices may change with significant fluctuations)

Condition: used, Year of construction: 1985, Used machine Year of manufacture: 1991 Plate size: 2200 x 1100 mm Equipped with Busse aluminium energy-saving plates (the spots visible in the pictures are only visual; the plates are in perfect condition) Total press capacity: 80 t Press cylinders: 4 x 90 mm Opening width: 400 mm Weight: approx. 3100 kg Total length: 2610 mm Total width: 1240 mm Total height: 1890 mm Motor power rating: 1.1 kW Connection per electric heating plate: approx. 6.6 kW Ltsdpfxox Enp Re Aanoa Availability: short notice Storage location: Röllbach

Condition: used, 1 pc. combination wide belt sander OTT COMET-1 with sanding belts, max. working width 1100mm, max. workpiece thickness 160mm, min. workpiece thickness 3mm, as per photos and inspection, self-dismantling required. Colour: green. Condition: used. Payment method: advance bank transfer. Location: carpentry shop/Hall 2. Shipping: Collection only - No shipping offered for this item! Ltodpfjx Ifd Djx Aanea

Condition: ready for operation (used), Year of construction: 1996, Main Drive Pressing force 135 Kn This OTT 300-K-D0 was manufactured in 1996. A robust veneer press featuring plate dimensions of 2550 x 1350 mm and hot water heating. It includes 6 pressure cylinders with a total pressing force of 135 tons. Consider the opportunity to buy this OTT 300-K-D0 veneer press. Contact us for more information about this machine. Application Types Pressing / Laminating Ltodex D E Avepfx Aanja

Condition: used, Year of construction: 1972, functionality: fully functional, pressing force: 240 t, opening width: 150 mm, plate length: 3,300 mm, working height: 900 mm, plate width: 1,400 mm, Automatic Veneer Throughfeed Press Ott Pressomat D 99/240 with 6 cylinders in operational condition: – Heating plate size approx. 3300 x 1400 mm – Total pressing force approx. 240 t – Specific pressing pressure approx. 5 kg/cm² Lsdpfxex Nr Edj Aanjta – Number of steel heating plates: 2 pieces – Heating plate thickness approx. 40 mm – Number of hydraulic cylinders: 6 pieces – Piston diameter: 6 x 140 mm – Piston stroke approx. 150 mm – 4-way rack and pinion guide – Working height approx. 900 mm – Plastic Mylar belt – Automatic end-feed loading – Loading station / feed table in front of the press – Conveyor belt approx. 7100 x 1420 mm – Pneumatic control – Roller track (disc rollers) in front of/above the loading station – Roller track approx. 2000 x 1400 mm – Disc rollers running in a water bath – Roller conveyor with mobile support feet – Outfeed roller conveyor approx. 3300 x 1400 mm – Hot oil boiler HG 80 for heat transfer oil – Heating capacity approx. 80,000 WE/h – Oil burner for light fuel oil – Year of manufacture: 1972, first owner, well-maintained condition – Sale from location Karlsruhe / Southern Germany – Machine is still connected and fully operational – Inspection and test run possible by appointment

Condition: excellent (used), Edge trimming machine Working height: 800 mm Ljdpfx Aswiwnqjanjta Dimensions (L x W x H): approx. 1,060 x 720 x 930 mm Compressed air connection: 6 bar Weight: approx. 120 kg Including cutter

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, Ott frezzer st1 psp Lodpfx Asxn Tvrsanjta Nyrenoverad. Pastoreserande, 3fas , vattenkyld.

Condition: used, OTT Tornado - TOP Control system - via a 15-inch color touch monitor for full automation and maximum operating convenience. CM-CombiMelt gluing system suitable for processing EVA and PUR hot melt adhesives as well as all standard cleaning granulates. Joint processing unit for edging chipboard panels. Automatic roll magazine. Automatic edge magazine. Double end trimming unit with automatic 0° / 3° swivel. Flush milling unit for flush trimming - 12mm. Ledpfsxy Iw Ujx Aanota Fine radius milling - profile knives R2 - R5. Automated copying milling - corner rounding. Scraper unit - radius / bevel. Surface scraper unit. Sliding agent spray unit - PU. Cleaning set with fine polishing unit. Very stable workpiece support with roller conveyors - FRONT with scissor extension. Complete set of tools included. Machine is AS NEW in EXTREMELY WELL-MAINTAINED CONDITION. First commissioning in 2009, very few operating hours, approx. 1600. Machine from lease return / leasing option available. Ex stock Lieboch.

Condition: used, Year of construction: 1978, Number of belts: 2-belt Max. working width: 1100 mm Min. working height: 3 mm Max. working height: 160 mm 1st belt: calibration roller Diameter of 1st roller: 260 mm Type of 1st roller: grooved rubber roller Abrasive belt length 1st unit: 1900 mm Abrasive belt width 1st unit: 1100 mm Lsdpjxta H Iofx Aanjta Abrasive belt speed 1st unit: 25 m/sec Drive unit 1: 20 kW 2nd belt: pad unit Sanding shoe 2nd unit: pneumatic Abrasive belt length 2nd unit: 1900 mm Abrasive belt width 2nd unit: 1100 mm Abrasive belt speed 2nd unit: 25 m/sec Drive unit 2: 13.5 kW Cleaning brushes: Yes Feed speed: 7 m/min / 14 m/min (selectable) Control: manual control panel Electric/pneumatic belt oscillation: Yes Table lift: electro-motorized Table display: mechanical numerical indicator Operating pressure: 6 bar Machine number: 185 Weight approx.: 2500 kg Dimensions: 1800 x 2000 x 1900 mm Extraction diameter: 2 x 200 mm Location: Nattheim

Condition: used, Year of construction: 1990, Used machine Ltedpfswxh Dusx Aanoa Year of manufacture: 1990 Features and technical data: Max. working width: 1100 mm Min / max. workpiece thickness: 3 / 160 mm Sanding belt dimensions: 2150 x 1120 mm Sanding belt speed: 18 m/sec Feed speed: 4 + 8 m/min Sanding unit motor power: 15 kW Feed belt motor power: 1.1 / 1.8 kW Operating pressure: 6 bar Air consumption: 20 l/min Extraction nozzles: 2 x 150 + 1 x 120 mm Dimensions: 2690x1800x2100 mm Weight: approx. 3500 kg Note: Machine is not operational (feed belt is missing) Storage location: Flörsheim Availability: by arrangement

Condition: excellent (used), Year of construction: 2007, Edge thickness 0.2 - 12 mm Workpiece thickness 8 - 52 mm Workpiece width min. 70 mm Workpiece length min. 150 mm Automatic edge magazine milling unit 2 x 1.5 kW, application-controlled Cut-off unit 2 x 0.3 kW Flush trimming unit 2 x 0.7 kW, scanning on one side Fine trimming unit 2 x 0.35 kW, tiltable 15/ 30/ 45 degrees Fine trimming unit 2 x 0.3 kW, R=2, scanning on both sides Corner copying unit 2 x 0.3 kW Scraper unit, autom. in/ out Flat scraper unit Buffing unit 2 x 0.2 kW, oscillating 5 x spray device (2 x release agent, 1 x lubricant, 2 x cleaning agent) Color touch screen control OTT C3 Motorized height adjustment Ltsdpfx Aslc Ewisansa Feed 10 - 14 m/min COMBI MELT gluing part for EVA/ PUR, volume 1.5 l CE mark Total connection 12.6 kW Dimensions L x W x H approx. = 6120 x 840 x 1500 mm Weight approx. 2,900 kg

Condition: used, Year of construction: 1996, Press dimensions: 2550 x 1350 mm Plates: Gold anodized Total pressing force: 80 t Specific pressing pressure: 2.8 - 4.0 kg/cm² Hydraulic cylinders: 4 x 90 mm Opening width and press stroke: 400 mm Safety pull cord Safety frame Button control Total connected load: 19.3 kW Ledpfexy Tl Rsx Aansta Storage location: Supplier

Condition: excellent (used), Pressing Area: 2500 x 1300 mm Number of Press Cylinders: 4 Total Pressing Force: 90 t Ledpferivrwox Aanjta Operating Voltage: 3 x 400 V + N, 50 Hz Total Connected Load: approx. 20.3 kW Space Requirement (L x W x H) approx.: 2900 x 1350 x 1900 mm Weight: approx. 3,600 kg Hydraulic Heated Platen Press Under-piston Design ELKOM Electric Heating Plates Pressing Pressure steplessly adjustable via pressure switch Two-stage hydraulic pump with automatic changeover valve from low to high pressure Central control panel with all operating elements Analog temperature display for both heating plates Emergency stop safety cable Rack and pinion equalizer Main switch CE-compliant NEW ALUMINIUM COVER PLATES Note on Used Machines: • Subject to errors in technical data and prior sale. • Quoted prices are ex location, loaded free of charge! • The machine has been cleaned and function-tested. • All machines are sold as seen, without any guarantee or warranty. The buyer is welcome to inspect the machine on site. • Special agreements are only valid in written form. (Inquiries will only be answered with your address and telephone number!)

Condition: excellent (used), Year of construction: 1993, OTT Model JU 2513 Hydraulic veneer press with electric heating plates Under-piston design BUSSE electric heating plates Central control panel with all operating elements Analog temperature display for both heating plates Pressing pressure infinitely adjustable via pressure switch device Main switch Two-stage hydraulic pump with automatic switching valve from low to high pressure Ljdpfxjxgpaqj Aansta Emergency safety pull cord Rack compensation Stroke limitation CE compliant Press area: 2500 x 1300 mm Number of press cylinders: 4 Total pressing force: 70 t Operating voltage: 3 x 400 V + N, 50 Hz Total connected load: approx. 20.3 kW Required space (L x W x H): approx. 2900 x 1250 x 1900 mm Weight: approx. 3200 kg