Used Ott Tornado for sale (76)

Condition: excellent (used), Year of construction: 2007, Edge thickness 0.2 - 12 mm Workpiece thickness 8 - 52 mm Isdpfx Aelc Ewieanstr Workpiece width min. 70 mm Workpiece length min. 150 mm Automatic edge magazine milling unit 2 x 1.5 kW, application-controlled Cut-off unit 2 x 0.3 kW Flush trimming unit 2 x 0.7 kW, scanning on one side Fine trimming unit 2 x 0.35 kW, tiltable 15/ 30/ 45 degrees Fine trimming unit 2 x 0.3 kW, R=2, scanning on both sides Corner copying unit 2 x 0.3 kW Scraper unit, autom. in/ out Flat scraper unit Buffing unit 2 x 0.2 kW, oscillating 5 x spray device (2 x release agent, 1 x lubricant, 2 x cleaning agent) Color touch screen control OTT C3 Motorized height adjustment Feed 10 - 14 m/min COMBI MELT gluing part for EVA/ PUR, volume 1.5 l CE mark Total connection 12.6 kW Dimensions L x W x H approx. = 6120 x 840 x 1500 mm Weight approx. 2,900 kg

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: T/41242, workpiece height (max.): 52 mm, edge thickness (max.): 12 mm, working height: 880 mm, empty load weight: 3,000 kg, throughput speed: 233 mm/s, TECHNICAL DETAILS Operating Method: Single-sided, right-hand operation Edge Thickness: 0.2 – 12 mm Workpiece Dimensions Minimum Width: 70 mm Minimum Height: 8 mm Maximum Height: 52 mm Minimum Length: 150 mm Feed Speed: 10 – 14 m/min Working Height: 880 mm MACHINE DETAILS Processing Units Jointing Section with 2 HF motors, 1.5 kW Double End Trimming Unit with 2 HF motors, 0.3 kW Flush Milling Unit with 2 HF motors, 0.7 kW Fine Chamfer Mill with 2 HF motors, 0.3 kW Fine Radius Mill with 2 HF motors, 0.3 kW Corner Rounding Unit with 2 motors, 0.35 kW Scraper Unit for Plastic Edges Dimensions & Weight Machine Dimensions (L x W x H): 6,120 x 840 x 1,385 mm Machine Weight: 3,000 kg Itedpfx Aaextfchenor Operating Voltage: 400 V, 50 Hz Total Connected Load: 12 kW Electrical Connection: 3 x 400 V, 5 x 6 mm², fuse 35 A EQUIPMENT Double roller top pressure with electronic positioning Automatic coil magazine for rolls up to 800 mm diameter with pneumatic cut-off device for up to 3 mm thickness Automatic edge magazine with optical monitoring for fixed-length edge strips Infeed fence with automatic positioning after inputting the jointing value CM - CombiMelt - Modular glue application system Control system via 7-inch TFT color touch display 100 freely alphanumeric storable work programs PLC for high-resolution track control Individual frequency inverters for separate activation of processing motors Hole detection system for skipping CNC processing Network capability for integration into a data network

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, OTT Tornado Top Edge Banding Machine in Excellent Condition PU glue pot with release agent, also suitable for EVA adhesives. We had the entire machine recalibrated in September 2024. The glue unit was replaced. The results are perfect with transparent adhesive and incredible with white panels using white adhesive. The machine runs perfectly and without any problems. Technical specifications: Edge thickness: 0.4 - 8 mm Panel thickness: 8 - 40 mm Minimum panel length: 150 mm Itjdpfx Aasv Sm Hcjnor Minimum panel width: 70 mm Feed speed: 14 m/min Pre-milling unit: with 2 HF motors, 2.3 kW, 12,000 rpm Cross-cutting unit: with 2 HF motors, 0.3 kW, 12,000 rpm Flush trimming unit: with 2 HF motors, 0.7 kW, 12,000 rpm Fine trimming unit: with 2 HF motors, 0.3 kW, 12,000 rpm Corner rounding unit Scraper blade Buffing unit Triple spraying Total power: 17.5 kW Dimensions: Length: 6180 mm Width: 1770 mm mm Weight: 3100 kg - Available immediately -

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: T/41242, workpiece height (max.): 52 mm, edge thickness (max.): 12 mm, working height: 880 mm, empty load weight: 3,000 kg, throughput speed: 233 mm/s, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Operation: Single-sided, right-hand version Edge thickness: 0.2 – 12 mm Workpiece dimensions Minimum width: 70 mm Minimum height: 8 mm Maximum height: 52 mm Minimum length: 150 mm Feed speed: 10 – 14 m/min Working height: 880 mm MACHINE DETAILS Processing units Jointing unit with 2 high-frequency motors, 1.5 kW Double end trimming unit with 2 high-frequency motors, 0.3 kW Flush trimming unit with 2 high-frequency motors, 0.7 kW Fine trimming CHAMFERING unit with 2 high-frequency motors, 0.3 kW Fine trimming RADIUS unit with 2 high-frequency motors, 0.3 kW Corner rounding unit with 2 motors, 0.35 kW Scraper unit for plastic edges Dimensions & Weight Machine dimensions (L x W x H): 6,120 x 840 x 1,385 mm Machine weight: 3,000 kg Iedpfx Ajxa Acrsanjtr Operating voltage: 400 V, 50 Hz Total connected load: 12 kW Electrical connection: 3 x 400 V, 5 x 6 mm², fuse 35 A EQUIPMENT Double roller top pressure with electronic positioning Automatic roll magazine for coils up to 800 mm diameter, with pneumatic guillotine for edge thickness up to 3 mm Automatic edge magazine with optical monitoring for strip edges in fixed lengths Infeed fence with automatic positioning when inputting the jointing value CM - CombiMelt adhesive application system in modular design Control system via 7-inch TFT color touchscreen display 100 work programs freely and alphanumerically programmable PLC for high-resolution feed control Individual frequency inverters for independent activation of processing motors Hole recognition to suppress CNC operations Network capability for integration into a data network

Condition: used, OTT Tornado - TOP Isdpfoxy Iw Uex Aanotr Control system - via a 15-inch color touch monitor for full automation and maximum operating convenience. CM-CombiMelt gluing system suitable for processing EVA and PUR hot melt adhesives as well as all standard cleaning granulates. Joint processing unit for edging chipboard panels. Automatic roll magazine. Automatic edge magazine. Double end trimming unit with automatic 0° / 3° swivel. Flush milling unit for flush trimming - 12mm. Fine radius milling - profile knives R2 - R5. Automated copying milling - corner rounding. Scraper unit - radius / bevel. Surface scraper unit. Sliding agent spray unit - PU. Cleaning set with fine polishing unit. Very stable workpiece support with roller conveyors - FRONT with scissor extension. Complete set of tools included. Machine is AS NEW in EXTREMELY WELL-MAINTAINED CONDITION. First commissioning in 2009, very few operating hours, approx. 1600. Machine from lease return / leasing option available. Ex stock Lieboch.

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Equipment and technical specifications: - Round tank glue application unit - Feed unit with automatic edge band magazine - Pressure zone with multiple pressure rollers - End trimming: 2 motorized saw units for front/end trimming - Top/bottom milling units: 2 milling units with copy wheels for radius or chamfer - Radius scraper: pneumatically controlled, for post-processing radii - Surface scraper: for smoothing the edge surfaces - Buffing unit: 2 buffing wheels with motors for final finishing - Riepe spraying device - Control: PLC with operator panel - Feed frequency inverter replaced by Ott in 2022 Ijdpfx Aajxdpm Senotr - Feed speed approx. 10–12 m/min - Workpiece thickness up to 52 mm - Edge thickness 0.3 – 12 mm - Power supply 3x 400 V AC, 50 Hz - Rated power 12.7 kW - Rated current 30.5 A - Control voltage 24 V DC - Max. fuse protection 35 A (5x 6 mm² connection cable) Machine dimensions: approx. 6120x840x1385 mm Machine weight: approx. 3,000 kg Availability: Short notice Location: Bavaria

Condition: excellent (used), Year of construction: 1993, max. edge thickness coils 0.2 - 3 mm max. edge thickness solid strips15 mm feed speed 12/ 18 m/min glue plot heating time approx. 6 min Ijdpfxefbr S Ro Aanotr autom. strip magazine coil magazine granulate heating pot flush trimming unit radius trimming unit operating panel extendable work piece support noice cancelation hood machine length 3800 mm Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Year of construction: 1994, condition: good (used), Finishing unit, buffing unit, modular unit, format processing unit, double-end tenoner, edge processing machine, plastering unit -Manufacturer: Paul OTT, Finishing unit from edgebanding machine U 206 -Type: KEO-04 -Motor: 0.3 kW -Speed: 1450 rpm - laterally adjustable -Height: adjustable -Number: 2 units available Ijdpfx Aaju N Sggonotr Price: per piece -Dimensions: 400/280/H660 mm / 480/290/H660 mm -Weight: 35 kg/ 36 kg

Condition: used, Year of construction: 2000, Ott Unimatic Edge Banding Machine, Reliable and good machine. Has a pre-milling. 4 diamond cutters as a gift. It can glue not only natural or plastic edging, but also strips up to 20 mm thick. Ijdewh Rw Aopfx Aanetr

Condition: used, Year of construction: 1968, 1 piece veneer press OTT JU 60-S 380V, 12kW, as per images and inspection Isdsx Ifpmjpfx Aanetr Color: green Year of manufacture: 1968 Condition: used Payment method: advance bank transfer Storage location: workshop Shipping: Pickup only – shipping is not offered for this item!

Condition: ready for operation (used), Year of construction: 1996, Main Drive Pressing force 686 Kn Isdpox D D Nnjfx Aanetr This OTT ST 1611/60 veneer press was manufactured in 1996. It features a maximum pressing force of 70 tons, pressing plates measuring 1300x1611 mm, and a power output of 10.1 kW. The plates are electrically heated, enhancing its efficiency. Consider the opportunity to buy this OTT ST 1611/60 veneer press. Contact us for more information. Application Types Pressing / Laminating

Condition: excellent (used), Catalogue number: 7549 TECHNICAL DATA Max width of workpiece: 1100mm Max height of workpiece: 170mm 2 units: 1) Grooved rubber roller for calibration 2) Rubber roller + pad + metal roller – from above: Metal roller, sliding Working unit Metal roller, sliding Unit with pad Output metal roller, sliding – from below: Feed belt Itsdpfxovxuxms Aansr Pneumatic belt oscillation Electric table lifting 2 feed speeds Motor: 11kW With pneumatic brake Working pressure: 6-8 bar Extractor outlet diameter: 2x150mm Overall dimensions (L/W/H): 1960x1700x2000mm Weight approx.: 2000kg – German manufacture – 2 units – not repainted – Used sander, very good condition Net price: 34,900 PLN Net price: 8,300 EUR at 4.2 EUR rate (Prices may change with significant fluctuations)

Condition: excellent (used), Year of construction: 2002, edge seize 0,2 - 12 mm work piece dimension width min. 70 mm height min. / max. 8 / 42 mm length min 160 mm (strips) length min 60 mm from roll Durchlaufgeschwindigkeit: 12 m/ min glue coating with roller working height : 880 mm compressed air 6 bar,1/4 Zoll suction connection, DM 160 mm dimensions: L x W x H = 5600 x 950 x 1300 mm weight: ca. 2200 kg total conection: ca. 11,5 kW, 400 V, 50 Hz machine equipped with: - double top roll pressure with electric height adjustment - autom. roll magazine for rolls up to 800 mm DM, pneumatic cutting up to 3 mm - autom. infeed fence - no adjustment of edge seize premilling aggregate with 2 HF-motors 1,5 kW, 12000 n Iodpfohy Tlrex Aanstr double end trim unit - 2 HF-motors 0,2 kW, 12.000 n 2 autom. positions = 0 + 3 deg. flush trimming aggregate with 2 HF-motors 0,7 kW, 12.000 n radius trimming unit - with2 HF-motors 0, 3 kW, 12.000 n, radius scraping unit, autom. set in flat scraping unit Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: used, Year of construction: 1985, Used machine Year of manufacture: 1991 Plate size: 2200 x 1100 mm Equipped with Busse aluminium energy-saving plates (the spots visible in the pictures are only visual; the plates are in perfect condition) Total press capacity: 80 t Itjdpfex Enp Rex Aanjr Press cylinders: 4 x 90 mm Opening width: 400 mm Weight: approx. 3100 kg Total length: 2610 mm Total width: 1240 mm Total height: 1890 mm Motor power rating: 1.1 kW Connection per electric heating plate: approx. 6.6 kW Availability: short notice Storage location: Röllbach

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, Ott frezzer st1 psp Nyrenoverad. Pastoreserande, 3fas , vattenkyld. Iodpfx Ajxn Tvreanjtr

Condition: used, 1 pc. combination wide belt sander OTT COMET-1 with sanding belts, max. working width 1100mm, max. workpiece thickness 160mm, min. workpiece thickness 3mm, as per photos and inspection, self-dismantling required. Colour: green. Condition: used. Payment method: advance bank transfer. Location: carpentry shop/Hall 2. Shipping: Collection only - No shipping offered for this item! Itedsx Ifd Depfx Aansr

Condition: ready for operation (used), Year of construction: 1996, Main Drive Pressing force 135 Kn This OTT 300-K-D0 was manufactured in 1996. A robust veneer press featuring plate dimensions of 2550 x 1350 mm and hot water heating. It includes 6 pressure cylinders with a total pressing force of 135 tons. Consider the opportunity to buy this OTT 300-K-D0 veneer press. Contact us for more information about this machine. Application Types Iedex D E Avjpfx Aanstr Pressing / Laminating

Condition: used, Year of construction: 1978, Number of belts: 2-belt Max. working width: 1100 mm Min. working height: 3 mm Max. working height: 160 mm 1st belt: calibration roller Diameter of 1st roller: 260 mm Type of 1st roller: grooved rubber roller Abrasive belt length 1st unit: 1900 mm Abrasive belt width 1st unit: 1100 mm Abrasive belt speed 1st unit: 25 m/sec Drive unit 1: 20 kW 2nd belt: pad unit Sanding shoe 2nd unit: pneumatic Abrasive belt length 2nd unit: 1900 mm Abrasive belt width 2nd unit: 1100 mm Abrasive belt speed 2nd unit: 25 m/sec Drive unit 2: 13.5 kW Cleaning brushes: Yes Feed speed: 7 m/min / 14 m/min (selectable) Control: manual control panel Electric/pneumatic belt oscillation: Yes Table lift: electro-motorized Table display: mechanical numerical indicator Operating pressure: 6 bar Machine number: 185 Weight approx.: 2500 kg Dimensions: 1800 x 2000 x 1900 mm Iodsxta H Iepfx Aanstr Extraction diameter: 2 x 200 mm Location: Nattheim

Condition: excellent (used), Edge trimming machine Working height: 800 mm Dimensions (L x W x H): approx. 1,060 x 720 x 930 mm Isdpswiwnqjfx Aanstr Compressed air connection: 6 bar Weight: approx. 120 kg Including cutter

Condition: used, Year of construction: 1990, Used machine Itsdewxh Duepfx Aaner Year of manufacture: 1990 Features and technical data: Max. working width: 1100 mm Min / max. workpiece thickness: 3 / 160 mm Sanding belt dimensions: 2150 x 1120 mm Sanding belt speed: 18 m/sec Feed speed: 4 + 8 m/min Sanding unit motor power: 15 kW Feed belt motor power: 1.1 / 1.8 kW Operating pressure: 6 bar Air consumption: 20 l/min Extraction nozzles: 2 x 150 + 1 x 120 mm Dimensions: 2690x1800x2100 mm Weight: approx. 3500 kg Note: Machine is not operational (feed belt is missing) Storage location: Flörsheim Availability: by arrangement

Condition: ready for operation (used), Year of construction: 1994, Ott 2513 Stabil Veneer Press 4 cylinders Pressing area 2500 x 1300 mm Electric heating Itsdpfx Aajx Dzvxjnor Electric opening and closing Pressing force 90 tons Year of manufacture 1994 Price 7,500.-

Condition: used, Year of construction: 1996, Press dimensions: 2550 x 1350 mm Plates: Gold anodized Total pressing force: 80 t Specific pressing pressure: 2.8 - 4.0 kg/cm² Hydraulic cylinders: 4 x 90 mm Opening width and press stroke: 400 mm Safety pull cord Safety frame Button control Total connected load: 19.3 kW Storage location: Supplier Isdpfxexy Tl Rj Aanotr

Condition: excellent (used), Pressing Area: 2500 x 1300 mm Number of Press Cylinders: 4 Total Pressing Force: 90 t Operating Voltage: 3 x 400 V + N, 50 Hz Total Connected Load: approx. 20.3 kW Space Requirement (L x W x H) approx.: 2900 x 1350 x 1900 mm Weight: approx. 3,600 kg Itedpjrivrwefx Aaner Hydraulic Heated Platen Press Under-piston Design ELKOM Electric Heating Plates Pressing Pressure steplessly adjustable via pressure switch Two-stage hydraulic pump with automatic changeover valve from low to high pressure Central control panel with all operating elements Analog temperature display for both heating plates Emergency stop safety cable Rack and pinion equalizer Main switch CE-compliant NEW ALUMINIUM COVER PLATES Note on Used Machines: • Subject to errors in technical data and prior sale. • Quoted prices are ex location, loaded free of charge! • The machine has been cleaned and function-tested. • All machines are sold as seen, without any guarantee or warranty. The buyer is welcome to inspect the machine on site. • Special agreements are only valid in written form. (Inquiries will only be answered with your address and telephone number!)

Condition: used, Year of construction: 1997, Number of belts: 2-belt Max. working width: 1100 mm Min. working height: 3 mm Max. working height: 160 mm 1st belt: Calibration roller Diameter of 1st roller: 150 mm Design of 1st roller: grooved rubber roller 90 degrees Shore Sanding belt length of 1st unit: 1900 mm Sanding belt width of 1st unit: 1120 mm Sanding belt speed of 1st unit: 18 m/sec Drive of unit 1: 11 kW 2nd belt: Sanding unit shoe Sanding shoe of 2nd unit: electronic individual links 45 mm segment width Sanding belt length of 2nd unit: 1900 mm Sanding belt width of 2nd unit: 1120 mm Sanding belt speed 2nd unit: 18 m/sec Drive of 2nd units: shared motor with 1st unit with rigid sanding pad for solid wood and frame sanding. Lacquer sanding possible: No. Fixed feed speed: 5/10 m/min. Control: Hand control panel. Electric/pneumatic belt oscillation: Yes. Table lift: Electric. Table display: Digital. Operating pressure: 6 bar. Machine number: E / 79191. Dimensions: 1930 x 1700 x 1980 mm. Motor power: 12 kW. Extraction diameter: 2 x 150. Storage location: Nattheim. Iedpfxexq Apte Aanetr

Condition: excellent (used), Year of construction: 1993, OTT Model JU 2513 Hydraulic veneer press with electric heating plates Under-piston design BUSSE electric heating plates Central control panel with all operating elements Itedpfx Aasxgpaqoner Analog temperature display for both heating plates Pressing pressure infinitely adjustable via pressure switch device Main switch Two-stage hydraulic pump with automatic switching valve from low to high pressure Emergency safety pull cord Rack compensation Stroke limitation CE compliant Press area: 2500 x 1300 mm Number of press cylinders: 4 Total pressing force: 70 t Operating voltage: 3 x 400 V + N, 50 Hz Total connected load: approx. 20.3 kW Required space (L x W x H): approx. 2900 x 1250 x 1900 mm Weight: approx. 3200 kg