Neumann GmbH

Condition: used, Year of construction: 2017, Wheel diameter Maximum cutting height. Maximum cutting width. Maximum blade width. Max and min. blade length Speed of the wheels Blade speed Ground height from the floor Floor size Ground inclination Motor power Suction ports Required flow for the extraction system (air speed 20 m/s). Pneumatic brake service pressure Net weight Overall dimensions Operator position noise level 800 mm 400 mm 780 mm 80 x 0,8 mm 5530 / 5380 mm 680 rpm 28, 5 mt/sec 950 mm 1060x800 mm 15° 11(15 HP) Kw Credpfx Aie Aia I Dezei 1 x Ø 100 mm. 2 x Ø 120 mm. no. 1430 m3/h 6 - 8 bar 700 Kg 2500x1100x1730 mm 81,6 dB (A)

Condition: good (used), The scope of delivery includes: 1x bracket for rear panel grille, used Material color: similar to gray-white Diagonal length: approx. 285 mm Overall width: approx. 100 mm Protrusion: approx. 150 mm Material thickness: approx. 3.00 mm Weight/piece: 0.56 kg 2 elongated holes: 55 x 9 mm (W x H) Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for pick-up only. Any additional transport or shipping of this item will incur extra costs, which can be requested separately Codpfx Ao Aia Iysizeri depending on the delivery location or scope of delivery.

Condition: good (used), mileage: 1,52,173 km, power: 315 kW (428.28 HP), first registration: 06/2019, fuel type: diesel, tire size: 315/80R22,5, axle configuration: 6x4, wheelbase: 3,300 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 8,600 mm, total width: 2,550 mm, total height: 3,800 mm, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, power mirror, seat heater, tachograph, traction control, - Heated mirrors - Digital tachograph - Fixed - Halogen lamp - Short cab - Manual - Auxiliary drive - Pump - Radio/cassette - Reversing camera - Seat cover Number of axles: 3, Configuration: 6x4, Tare weight: 12150 kg, Gross vehicle weight: 26000 kg, Total tank capacity: 290 liters, Fifth wheel coupling: Fixed, Number of differentials: 2, Winch pulling capacity: 380 tons, Suspension type: Leaf suspension, Cab type: Short cab, Cruise control, Tachograph (control unit), Digital tachograph, Air conditioning, Electric windows, Electric mirrors, Radio/cassette, Color: White, Heated mirrors, Reversing camera, Lighting type: Halogen lamp, Seat heating, Bluetooth, Engine power: 315 kW (422 hp), Engine displacement: 10677 cc, Fuel: Diesel, Euro: 6, Transmission type: Telligent, Transmission type: Mercedes Benz, Gears: 12, Power steering, ABS, ASR, Auxiliary drive, PTO type: 1, Body year of construction: 2019, System type: Schwing Stetter AM7FHCBL, Drum volume: 7, Drum volume in: m3, Mixer drive: Hydraulic pump, Load type: Concrete, Pump, Water system, Water tank, Water tank capacity: 500 liters, Central locking, Seat arrangement: 1+1, Seat cover: Seat cover, Seat adjustment: Manual, 7m3 Stetter, 152,000 km Transmission Transmission: MB, 12 gears, Automatic Axle configuration Tire size: 315/80R22.5 Brakes: Disc brakes Axle 1: Steered; Tire tread depth left: 6 mm; Tire tread depth right: 22 mm; Suspension: Leaf suspension Axle 2: Double tires; Tire tread depth left inner: 5 mm; Tire tread depth left outer: 4 mm; Tire tread depth right inner: 21 mm; Tire tread depth right outer: 21 mm; Suspension: Air suspension Axle 3: Double tires; Tire tread depth left inner: 14 mm; Tire tread depth left outer: 14 mm; Tire tread depth right inner: 14 mm; Tire tread depth right outer: 18 mm; Suspension: Air suspension Weights Unladen weight: 12,150 kg Crsdj Aia Hxepfx Aizji Payload: 13,850 kg GVW: 26,000 kg Functional Pump: Yes Water system: Yes Water tank: 500 liters Maintenance APK (technical inspection): valid until 12/2026 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 1 Financial information Leasing price: €1,109 per month (default, 72 months); Inquire about further information and conditions Identification License plate: KLEYN1 Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here, you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our range includes all European brands, from various years of manufacture and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing stock • Recognizable quality • A good price • Proper business practices • We speak many languages • We understand our customers • Support with import and transport • (Export) registration can be arranged quickly • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Calculate...

Condition: used, Year of construction: 2009, 4-postes Credpfx Ao Aia Hqjizoi 220/120mm Lubrication 380V

Condition: good (used), mileage: 4,00,574 km, first registration: 07/2020, fuel type: diesel, tire size: 315/80R22,5, axle configuration: 4x4, wheelbase: 3,900 mm, fuel: diesel, color: yellow, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel, total length: 6,750 mm, total width: 2,550 mm, total height: 3,580 mm, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, parking heater, power mirror, seat heater, tachograph, traction control, = Additional Options and Accessories = - Heated mirrors - CarPlay - Digital tachograph - Fixed - Halogen lamp - Hydraulic system - Air conditioning - Manual - Auxiliary drive - Pump - Radio/cassette - Sleeper cab - Fabric - Blind spot sensor = Notes = Number of axles: 2, Configuration: 4x4, Total tank capacity: 290 liters, Height of fifth wheel coupling: 144 cm, Fifth wheel coupling: Fixed, Number of locks: 2, Winch pulling capacity: 358 tons, Suspension type: Leaf spring suspension, Type of cab: Sleeper cab, Cruise control, Tachograph (control unit), Digital tachograph, Auxiliary heater, Electric windows, Electric mirrors, Radio/cassette, CarPlay, GPS navigation, Color: Yellow, Heated mirrors, Type of lighting: Halogen lamp, Air conditioning, Seat heating, Bluetooth, Blind spot sensor, Flashing lights, Fuel: Diesel, Euro: 6, Transmission type: Telligent, Transmission type: Mercedes Benz, Gears: 12, Power steering, ABS, ASR, Hydraulic system, Auxiliary drive, PTO type: 1, Pump, Central locking, Seat configuration: 1+1, Seat cover: Fabric, Seat adjustment: Manual = Additional Information = Transmission Transmission: MB, 12 gears, Automatic Codpfx Aie Aia Hmszori Axle Configuration Tire size: 315/80R22.5 Brakes: Drum brakes Suspension: Leaf spring suspension Axle 1: Steered; Tire tread depth left: 12 mm; Tire tread depth right: 5 mm Axle 2: Double tires; Tire tread depth left inner: 14 mm; Tire tread depth left outer: 14 mm; Tire tread depth right inner: 12 mm; Tire tread depth right outer: 14 mm Functional Pump: Yes Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Financial Information Leasing price: €788 per month (default, 60 months); Ask for more information and conditions Identification License plate: KLEYN1 = Company Information = Kleyn Trucks is one of the largest independent used vehicle dealerships in the world. Here you can choose from a constantly changing inventory of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing inventory • Recognizable quality • A good price • Proper business practices • We speak many languages • We understand our customers • Support for import and transport • (Export) license plates are quickly arranged • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send an inquiry via our website. Ask directly about our European warranty package.

Condition: used, Year of construction: 2006, 5 Positions Crjdpfs Aia Hiex Aizei 4 trees + 1 universal tree 230mm/120mm Digital positioning Table lubrication Lower drive roller in table Shaft training 4-tool-turret with indexable inserts 380V

Condition: good (used), Threaded flat-die roller Die size TR3 Crsdpfxo Aia Hfs Aizei for thread sizes from M4 to M10

Condition: used, Year of construction: 2021, functionality: fully functional, KSB ETNV 100-080-315 INDUSTRIAL PUMP – VERTICAL SUBMERSIBLE ETANORM V Original KSB centrifugal pump | German production | Year 2021 | Robust industrial design For sale is a KSB ETNV 100-080-315 vertical industrial pump from the Etanorm V series, manufactured by the renowned German company KSB. This submersible pump is designed for use in technological installations, industrial tanks, and liquid transport and circulation systems. The design with an extended shaft allows for vertical mounting, with the drive unit located outside the pumped medium. The unit is used in industries, production facilities, cooling systems, and process installations. KSB ETNV 100-080-315 Industrial Vertical Submersible Etanorm V Pump, Manufacturer's Code: ETN-V-100-080-315 KSB PUMP TECHNICAL DATA Manufacturer: KSB SE & Co. KGaA – Germany Model: ETNV 100-080-315 Series: KSB Etanorm V Material: GGSD Year of manufacture: 2021 Cede Aia E Tepfx Aizsri Impeller diameter: Ø 334 mm Head: H 36.80 m (to be confirmed) Type: centrifugal pump, vertical, submersible Mounting: vertical, flanged Discharge nozzle: side, flanged Drive: external, via shaft and coupling Electric motor: not included Stock number: 1199 KSB ETNV 100-080-315 Industrial Vertical Submersible Etanorm V Pump, Brand: KSB ADVANTAGES AND CHARACTERISTICS ✔ Renowned KSB brand – a German manufacturer of industrial pumps and valves. ✔ Vertical design – suitable for mounting in tanks and technological installations. ✔ Centrifugal pump – a solution for the transport and circulation of industrial liquids. ✔ Robust housing – durable construction with flanges, shaft, and coupling elements. ✔ External drive – can be used with a suitably selected electric motor. ✔ Industrial applications – suitable for production, technological, and process installations. KSB ETNV 100-080-315 Industrial Vertical Submersible Etanorm V Pump, Type: Other APPLICATION OF THE KSB SUBMERSIBLE PUMP Industrial tanks and vats. Technological and production installations. Cooling and water circulation systems. Process liquid transport systems. Washing and degreasing installations. Industrial plants and maintenance. Pumping systems with vertical mounting. Selecting a pump based on the type of liquid and installation parameters requires verification of the technical documentation. The item offered for sale is exactly the one shown in the photographs. The KSB Etanorm V pump is an excellent choice for industrial plants, pump service companies, maintenance departments, and companies looking for a vertical pump, a replacement unit, or parts for an industrial installation.

Condition: used, Year of construction: 2015, functionality: fully functional, KSB ETANORM GPV 150-125-250 GG INDUSTRIAL PUMP – VERTICAL CENTRIFUGAL PUMP, 200 m³/h Original KSB Etanorm GPV 150-125-250 GG centrifugal pump from the German manufacturer KSB, designed for industrial process systems, pumping systems, and liquid circulation. The robust vertical design with a volute casing and extended shaft allows the pump to be used in process tanks and industrial pumping systems. KSB ETANORM GPV 150-125-250 GG industrial vertical centrifugal pump. Manufacturer's code: PV 150-125-250 GG. TECHNICAL SPECIFICATIONS Manufacturer: KSB Aktiengesellschaft – Germany Model: ETANORM GPV 150-125-250 GG Type: industrial, centrifugal, single-stage pump Design: vertical, tank-mounted, with volute casing Nominal flow rate Q: 200 m³/h (200,000 l/h) Head H: 20 m Rotational speed: 1477 rpm Impeller diameter: 255 mm Pump nominal size: 150-125-250 Material: GG – cast iron Year on nameplate: 2015 Stock designation: No. 1462 Condition: used, without electric motor Hydraulic data matches the pump nameplate. KSB ETANORM GPV 150-125-250 GG industrial vertical centrifugal pump, KSB brand ADVANTAGES AND CHARACTERISTICS Original pump from a renowned industrial equipment manufacturer. High flow rate – 200 m³/h. Vertical design for installation in tank systems. Robust volute casing and centrifugal impeller. Flanged connections for process systems. Can be used as a replacement pump or a source of KSB spare parts. Design intended for use in industrial pumping systems. KSB ETANORM GPV 150-125-250 GG industrial vertical centrifugal pump, other type. APPLICATIONS OF THE KSB ETANORM GPV PUMP Industrial pumps from the Etanorm GPV series are used in: industrial and production plants, liquid circulation and transport systems, process and technology tanks, industrial washing systems, flushing and degreasing systems, surface treatment systems, technological water circulation systems. Selecting the pump for a specific medium requires checking the material compatibility and operating parameters. TECHNICAL CONDITION – USED PUMP Cjdpfx Ae Aia E Eeizsri The offered KSB Etanorm GPV 150-125-250 pump comes from an industrial plant. The unit has traces of use and storage, including local corrosion on the impeller, shaft, and flange surfaces. The pump is equipped with a volute casing, impeller, shaft, vertical column, and mounting elements visible in the photos. The stock designation has the inscription "Einsatzbereit" (ready for use). The pump is functional after service in Germany.

Condition: used, Year of construction: 2018, machine/vehicle number: PR33, Used AOKI AL-500LL-50S injection molding machine - Year 2018Technical Specifications & Performance DataThe AOKI AL-500LL-50S is an injection molding machine designed for PET container manufacturing through an integrated injection and blow molding process. This used bottling line asset is configured with 7 cavities, supporting efficient production of molded containers for industrial packaging and beverage production applications.Manufacturer: AOKI Technical Laboratory, Inc.Model: AL-500LL-50SManufacturing year: 2018Including: compressor and chillerCavity configuration: 7 cavitiesScrew diameter: 64 mmInjection capacity: 522.8 cm³/shotInjection mold clamping force: 500.3 kNPreform length below neck: 150 mmBlow mold clamping force: 608.3 kNBlow air pressure: 3.0 MPaAdvanced Automation & Control SystemsThe machine is equipped for three-phase electrical operation at 380 V and 50 Hz. Its installed electrical load is 94.0 kW with a current requirement of 168 A. The injection molding platform combines turntable and screw drive functions with hydraulic and pneumatic utilities for controlled molding cycles.Three-phase electrical supplyVoltage: 380 VFrequency: 50 HzPower: 94.0 kWCurrent: 168 AHydraulic pressure: 17.5 MPaPneumatic pressure: 3.0 MPaWater supply pressure: 0.3 MPaProduction Line Integration CapabilitiesThis AOKI injection molding machine can be positioned upstream of a used bottling line to produce PET containers directly from resin, reducing dependence on externally supplied bottles. Machines of this type are suited to integrated industrial packaging layouts where container production is coordinated with downstream handling, filling, capping, labeling and secondary packaging equipment.The 7-cavity configuration supports repeatable container molding for beverage production. Integration planning should consider molded-container discharge, conveyor connection, compressed-air supply, chilled-water services and downstream accumulation capacity.Machine Condition & Maintenance HistoryThe machine is offered as a second hand industrial packaging asset and is ready for operation. No mold is included with the machine, and auxiliary parts are not included. Buyers should plan tooling selection and auxiliary equipment integration according to the required container design and production process.Operational Performance & VersatilityThe AL-500LL-50S combines injection molding and blow molding functions for PET container production. Its technical configuration includes a 600 mm injection mold clamping stroke, a 115 mm blow mold clamping stroke, and a maximum chilling capacity of 51.2 kW. The machine requires cooling-water management and compressed air to support stable molding operation.Injection capacity varies according to the resin and molding parameters used. Actual operating pressure is governed by... Crjdpfx Ao Aia Ezsizoi

Condition: used, Year of construction: 2017, machine/vehicle number: SO149, Used KOSME KSB 6R rotary blow molding machine 12000 BPH - Year 2017Technical Specifications & Performance DataThis automatic rotary PET bottle blow molding machine is manufactured by KOSME and identified as model KSB 6R. Built in 2017, it is designed for forming PET bottles from preforms in industrial packaging and beverage production environments. The machine has a stated production capacity of up to 12,000 bph and was operated with six-cavity molds for the PCO 1881 neck finish.Manufacturer: KOSMEModel: KSB 6RYear: 2017Production capacity: 12,000 bphContainer material: PETMaximum bottle volume: 3.0LMold configuration: 6 cavitiesPreform neck type: PCO 1881Machine configuration: Automatic rotary blow molding machineAdvanced Automation & Control SystemsThe KOSME KSB 6R is an automatic rotary blower equipped with a preform feeding system. This arrangement supports a continuous supply of preforms to the blow molding process and is suited to integration within an automated PET bottling equipment layout. The rotary configuration is intended to support consistent bottle forming at the stated output rate.Machine-specific electrical data, control hardware and automation component specifications are not included among the available technical details. Installation and commissioning should therefore be planned around verification of the existing electrical interfaces, machine controls and safety circuits.Production Line Integration CapabilitiesDesigned for PET bottle production, this second hand blow molding machine can serve as the bottle-forming stage of a used bottling line. It is suitable for installations where PET containers are produced directly from preforms before downstream rinsing, filling, capping, labeling and secondary packaging operations.The included preform feeding system supports upstream preform handling. A chiller is available with the equipment and can support process cooling requirements. The compressor is not included, so a compatible compressed-air system is required for operation. The machine is configured for bottles up to 3.0L with PCO 1881 neck finish preforms.Machine Condition & Maintenance HistoryThe equipment was removed from operation in January 2026, dismantled and placed in storage. Its current condition is therefore classified as stored equipment. Operating hours are not provided. Buyers planning recommissioning should assess the condition of mechanical assemblies, pneumatic circuits, heating components, electrical systems and safety devices before installation.Operational Performance & VersatilityThis KOSME PET blow molding machine is intended for producing PET bottles used in beverage production and industrial packaging operations. Its six-cavity mold arrangement supported output of up to 12,000 bottles per hour. The documented configuration used PCO 1881 preforms, providing a defined neck-finish platform for compatible bottle and closure programs.Molds are excluded from the offer. Bottle design, final format and product application therefore depend on the... Cedpfo Aia Ewex Aizsri

Condition: used, Year of construction: 2019, machine/vehicle number: FA76, Used ATLANTA srink wrapping machine - Year 2019Technical Specifications & Performance DataUsed Atlanta type shrink wrapper, manufactured in 2019 and supplied as two units. The equipment is configured for secondary industrial packaging with a current 3x2 pack layout, providing compact film-wrapped bundles for efficient handling, transport and distribution.Quantity: 2 unitsYear of manufacture: 2019Current pack configuration: 3x2Capacity: 40-45 packs/min, ( 2.400 - 2.700 Packs/hours).Installed power: 5.9 kWElectrical supply: 400 V, 50 HzOperating air pressure: 6 barAdvanced Automation & Control SystemsThis shrink wrapper is designed for automated bundle formation and film wrapping within an industrial packaging environment. Its dry-run capability supports testing, setup and verification procedures without product flow, helping operators check the packaging cycle before production operation.The machine uses a 400 V, 50 Hz electrical supply and requires compressed air at 6 bar. These utility requirements should be coordinated with the available site services during installation and recommissioning.Production Line Integration CapabilitiesThe Atlanta type shrink wrapper can be positioned downstream of bottling, labeling or other primary-packaging equipment to create stable multipacks. With its 3x2 layout, it is suited to packaging-line applications where grouped containers require film protection and a practical handling format.In a used bottling line or second hand industrial packaging installation, shrink wrapping equipment typically interfaces with infeed and discharge conveyors. It can support beverage production and other containerized products where bundled packs are required before palletizing, warehousing or distribution.Machine Condition & Maintenance HistoryBoth machines are used and were operational until dismantling. They are reported to be in perfect working order, with no spare-parts replacement required. The equipment was dismantled during the current year and is suitable for professional installation, commissioning and integration into a production line.Operational Performance & VersatilityWith a stated output of 40-45 packs per minute, this shrink wrapper is designed for consistent secondary packaging throughput. The 3x2 pack arrangement provides a defined bundle format for film-wrapped products, supporting orderly downstream handling in industrial packaging operations.Dry-run operation is available, allowing functional checks of the packaging sequence. This feature is useful during installation, line setup and routine operational verification.Installation Requirements & Site PreparationInstallation requires a 400 V, 50 Hz electrical connection, 5.9 kW installed power and compressed air at 6 bar. As the two units have been dismantled, site preparation should include suitable floor space, conveyor alignment, electrical connection and pneumatic supply routing for reliable integration with upstream and downstream packaging machinery.Safety Standards & Compliance CertificationThe shrink wrappers should be installed a... Crjdpj Aia Etjfx Aizsi

Condition: used, Year of construction: 2017, machine/vehicle number: GA26, Used ROBINO & GALANDRINO RECORD 10000 wirehooder machineTechnical Specifications & Performance DataThe Robino & Galandrino RECORD 10000 is a wirehooder designed for the application of wire cages on bottles used in sparkling wine and champagne-style beverage production. Built in 2017, this industrial packaging machine supports the final closure stage after cork insertion, securing the cork with a correctly applied wire cage.Manufacturer: Robino & GalandrinoModel: RECORD 10000Machine type: WirehooderYear of manufacture: 2017Electrical supply: 400 V, 3-phaseFrequency: 50 HzCurrent marking: 6 AElectrical diagram: REC377Advanced Automation & Control SystemsThis wirehooding machine is configured for industrial bottle handling and cage application. Its three-phase 400 V electrical supply is suited to integration within an automated bottling and industrial packaging environment. The machine can be incorporated into coordinated line controls and bottle conveying systems according to the requirements of the existing production line.Production Line Integration CapabilitiesThe RECORD 10000 wirehooder is intended for installation in sparkling wine bottling operations, typically downstream of corking and upstream of final inspection, labeling or secondary packaging. A machine of this type can operate as part of a used bottling line handling glass bottles, where accurate positioning and tightening of the wire cage are essential for reliable cork retention.Its role in beverage production is particularly relevant for sparkling wine and champagne-style products, where the wirehood provides mechanical security around the cork during storage, transport and distribution. Integration should be coordinated with upstream corking equipment and downstream bottle transfer conveyors.Machine Condition & Maintenance HistoryThis second hand Robino & Galandrino wirehooder was manufactured in 2017. Its data plate identifies the machine as RECORD 10000 and provides the electrical supply details required for preliminary technical evaluation. Inspection of mechanical assemblies, wire cage feeding components, bottle guides, electrical equipment and safety devices is recommended before commissioning in a bottling equipment installation.Operational Performance & VersatilityWirehooding machinery applies and secures metal wire cages around corked bottles, supporting consistent closure quality for pressure-sensitive sparkling beverage applications. The process helps maintain cork retention and packaging integrity through subsequent labeling, packing, palletizing and distribution stages.For industrial packaging and beverage production, correct synchronization with bottle conveyors and the preceding corking process is important. Format parts and bottle-handling adjustments should be assessed according to the glass bottle dimensions, cork type and wire cage specification used by the intended production line.Installation Requirements & Site PreparationInstallation requires a 400 V, three-phase, 50 Hz electrical connection. The site should provide... Crodpfs Aia Elsx Aizei

Condition: used, Year of construction: 2009, machine/vehicle number: FA75, Used ITALDIBIPACK SA 1250 shrink wrapper - Year 2009Technical Specifications & Performance DataThe ITALDIBIPACK SA 1250 is a used shrink wrapper designed for secondary packaging operations in bottling and industrial packaging environments. Manufactured in 2009 and fully refurbished by ITALDIBIPACK in 2020, this machine is intended for wrapping products and grouped packs with shrink film. Its working configuration accommodates film rolls in different sizes, up to 1000 mm width.Manufacturer: ITALDIBIPACKModel: SA 1250Year: 2009Refurbishment: Fully refurbished in 2020 by ITALDIBIPACKMaximum film width: 1000 mmElectrical supply: 400 V, 3Ph + T + NFrequency: 50/60 HzPower: 2 kWWeight: 350 kgAdvanced Automation & Control SystemsThis shrink wrapper is configured for industrial operation with a three-phase electrical supply including earth and neutral connection. The machine is equipped for operation at 50/60 Hz and has an installed power requirement of 2 kW. Its film-routing arrangement incorporates guide and drive rollers to support controlled film handling during the wrapping cycle.The available safety protections contribute to protected operation around the machine's moving packaging components. The operating configuration is suitable for integration into an automated or semi-automated end-of-line packaging area, depending on the connected material-handling equipment and production layout.Production Line Integration CapabilitiesThe SA 1250 can be positioned downstream of filling, capping and labeling equipment to create shrink-film packs for a used bottling line or wider beverage production and industrial packaging process. It can receive products from straight infeed conveyors and can be coordinated with downstream palletizing or further handling systems.Machines of this type are commonly used to create stable, film-wrapped multipacks before pallet handling. The ability to use film rolls of different dimensions up to 1000 mm width provides flexibility when configuring packaging presentations and pack dimensions. Integration should include suitable product conveyors, electrical connection and synchronized upstream and downstream flow management.Machine Condition & Maintenance HistoryThe machine is in production. It was manufactured in 2009 and fully refurbished in 2020 by ITALDIBIPACK. This refurbishment history supports its suitability for continued second hand packaging operations where a maintained shrink wrapping solution is required.Manuals, refurbishment documentation and spare parts are available. These resources can assist maintenance teams with commissioning, routine servicing and ongoing support within a production line.Operational Performance & VersatilityThe ITALDIBIPACK SA 1250 provides a practical shrink wrapping function for grouped products in industrial packaging applications. It is suitable for use as part of secondary packaging operations in beverage production and other product-handling environments where film-wrapped packs are required.Its film handling system is designed a... Crodpfx Ao Aia Ehsizoi

Condition: used, Year of construction: 2005, machine/vehicle number: M358, Used BERCHI isofill 40-50-8 filling monoblock - Year 2005Technical Specifications & Performance DataBerchi ISOFILL P 40-50-8 is a filling monoblock manufactured in 2005 for integration into industrial bottling and beverage production environments. A filling monoblock combines key bottle-handling and filling functions in one coordinated machine platform, supporting efficient product transfer through a used bottling line.Manufacturer: BerchiModel: ISOFILL P 40-50-8Machine type: Filling monoblockYear of manufacture: 2005Advanced Automation & Control SystemsThe monoblock architecture synchronizes the principal filling operations through a centralized machine arrangement. This configuration is designed to support consistent bottle movement, repeatable filling cycles and coordinated operation with upstream and downstream bottling equipment. Control-system configuration, electrical ratings and automation components should be assessed during installation planning according to the requirements of the receiving production site.Production Line Integration CapabilitiesThis Berchi filling monoblock is suited to a bottling line layout where containers are conveyed into the filling area and transferred onward to subsequent packaging stages. Machines of this type are commonly positioned after container preparation equipment and before downstream operations such as labeling, inspection, secondary packaging and pallet handling.The compact monoblock concept can help simplify line integration by grouping filling-related functions into a single production unit. It is suitable for industrial packaging applications requiring coordinated container handling within a beverage production process. Final compatibility depends on the product, bottle material, bottle geometry, closure requirements, conveyor layout and the selected downstream equipment.Machine Condition & Maintenance HistoryThe machine is offered as a second hand filling monoblock manufactured in 2005. Its CE declaration of conformity identifies the ISOFILL P 40-50-8 designation and confirms conformity with the applicable machinery, low-voltage and electromagnetic compatibility directives stated in the declaration. A detailed mechanical, electrical and hygiene inspection is recommended before recommissioning in a used bottling line.Operational Performance & VersatilityFilling monoblocks are central units in beverage production, designed to manage the controlled transfer of product into bottles as part of an integrated packaging process. The Berchi ISOFILL P 40-50-8 can be evaluated for applications where filling performance, container flow and line synchronization are essential to industrial packaging efficiency.Before deployment, the machine should be matched to the intended product characteristics and packaging configuration. Format parts, filling process requirements, closure interfaces and sanitation procedures should be reviewed to ensure reliable operation within the planned production line.Installation Requirements & Site PreparationInstallation should provide a level, accessible production area with adequate clearance for operation, cleaning, maintenance and product-line connections. The line layout sho... Csdpfx Aj Aia Edsizeri

Condition: used, Year of construction: 2005, operating hours: 26,412 h, machine/vehicle number: M359, Used NATE PETBLOCK 30-60-8 filling monoblock 11000 BPHTechnical Specifications & Performance DataThe NATE PETBLOCK 30-60-8 is a used PET filling monoblock designed for high-output beverage production and integration into an industrial packaging line. This filling machine is configured for PET bottle handling and delivers a maximum production speed of 11,000 bph with 1.5L bottles. Its format range supports common bottle sizes for flexible production planning.Manufacturer: NATEModel: PETBLOCK 30-60-8Maximum speed: 11,000 bph for 1.5L bottlesCompatible bottle formats: 0.5L, 0.85L, 1.0L, 1.5L and 2.0LContainer type: PET bottlesNeck finish: 1881Operating hours: 26,412 hAdvanced Automation & Control SystemsThe monoblock is equipped with a Siemens S7-300 PLC, providing centralized control of machine functions and supporting reliable operation within a beverage production environment. PLC-based control helps operators manage production settings, monitor machine activity and coordinate the filling section with connected bottling equipment.The integrated automation architecture makes this second hand filling monoblock suitable for facilities seeking a controlled PET bottling solution with an established industrial control platform.Production Line Integration CapabilitiesThis NATE PET filling monoblock is intended for installation within a used bottling line or as part of a broader PET beverage production system. It can be positioned downstream of PET bottle production or empty-bottle handling equipment and upstream of labeling, secondary packaging and palletizing machinery.Its supported 0.5L to 2.0L bottle formats provide flexibility for production lines processing multiple PET bottle sizes. The 1881 neck finish specification is relevant when matching the machine with compatible closure handling and capping equipment.Machine Condition & Maintenance HistoryThis used filling monoblock has recorded 26,412 operating hours and is stated to remain in operation until 23 December 2026. Continued operation indicates that the machine has been used in an active production setting. Before relocation and commissioning, buyers should assess mechanical condition, product-contact components, format parts, electrical connections and the operational status of the PLC control system.Operational Performance & VersatilityThe PETBLOCK 30-60-8 is designed for PET bottle filling applications in beverage production. With a maximum stated output of 11,000 bph on 1.5L bottles, it offers a practical capacity for industrial packaging operations requiring consistent bottle handling across several available formats.Its PET-focused configuration makes it relevant for production environments handling packaged beverages in plastic bottles. Format capability from 0.5L through 2.0L supports adaptation to different retail and distribution pack sizes.Installation Requirements & Site PreparationInstallation should be planned around the machine's integration with upstream bottle supply and downstream labeling, packaging and conveying equipment. Site preparation should includ... Cedpfx Ais Aia Eaezeri

Condition: used, Year of construction: 2003, machine/vehicle number: PST45, Used SAP complete Pasteurizer 5000 LPHTechnical Specifications & Performance DataThis SAP pasteurizer system is a complete continuous-flow plate-and-tube pasteurization solution for still, non-carbonated beverages. Built around an Alfa Laval/Tetra Pak Clip 6-SR sanitary plate heat exchanger, the system is designed for controlled thermal treatment of liquid food products before filling. Its configuration supports production of non-alcoholic beverages with fruit content up to 5% and can process juices containing fibers and pulp up to approximately 8% when operated with the appropriate cycle and CIP procedures.Continuous flow rate: 3,500–5,000 L/hPasteurization temperature: 80°C to 95°CHolding time: 30 to 60 secondsHeat exchanger: Alfa Laval/Tetra Pak Clip 6-SRHeat exchanger internal volume: 62.0 LDesigned operating pressure: up to 6.0 barMaximum operating temperature: up to 110°CPasteurizer dimensions: 3300 x 2050 x 2370 mmManufacturing year: 2003Advanced Automation & Control SystemsThe pasteurizer is supplied with a control cabinet incorporating PLC control, enabling coordinated management of the process equipment. The system includes automatic valves, a temperature-maintenance system, holding tubes and a dedicated safety system. Pneumatic air demand is limited to valve actuation. Electrical consumption is primarily associated with two 4 kW pumps, while PLC consumption is minimal.The associated McQuay chiller is equipped for a 380–420 V, 3N~, 50 Hz electrical supply. Its total input is 12.19 kW at 25.3 A, with a nominal cooling capacity of 33.71 kW.Production Line Integration CapabilitiesDesigned for industrial packaging and beverage production applications, this second hand pasteurization system is intended to operate upstream of filling equipment. The process arrangement maintains the required pasteurization temperature and holding time before product transfer toward the filling area. A chiller is required in conjunction with the pasteurizer to lower product temperature before filling.The water-cooled process arrangement makes this equipment suitable for integration into a used bottling line handling still beverages, fruit beverages, juices and other liquid food products requiring continuous thermal treatment. The sanitary plate construction and clip-on gasket design support hygienic operation and CIP cleaning routines.Machine Condition & Maintenance HistoryThe system was previously used for the production of non-alcoholic beverages with fruit content up to 5%. It is scheduled to be taken out of service at the end of 2025. The supplied configuration includes the pasteurizer and the required chiller for pre-filling cooling duty.No electrical schematics or layout drawings are included. The PLC has no backup system.Operational Performance & VersatilityThe Clip 6-SR heat exchanger uses sanitary stainless steel plates with glue-free clip-on gaskets. The SR configuration is suited to high-viscosity media and juices containing fibers or pulp, while maintaining low pressure drop and reducing the risk of ... Crods Aia D Sopfx Aizji

Condition: used, Various Gubisch machines for sale. Csdpfs Aia D Iex Aizeri Price: €1.00 per kg.

Condition: used, mileage: 7,05,000 km, power: 92 kW (125.09 HP), first registration: 03/1970, fuel type: diesel, number of seats: 34, color: yellow, Year of construction: 1969, Former Swiss Postbus for sale. Vehicle: Saurer L4C, left-hand drive. Cedpo Aia Dyofx Aizsri One of the last bonnet-type buses built on a Saurer chassis. Body built by Ramseier + Jenzer. They completely restored the vehicle in 1991 (factory restoration). The vehicle was owned by the previous owner for 40 years. Impeccably maintained and ready for immediate use. 125 hp, 4-speed gearbox + overdrive, power steering, pneumatic door at the front and rear, length 10,005 mm, height 2,980 mm, width 2,300 mm, 33 passenger seats + driver, 2 roof hatches, radio with microphone. €75,000.00 Net export possible. We offer worldwide shipping.

Condition: excellent (used), functionality: fully functional, mileage: 1,58,132 km, power: 110 kW (149.56 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, wheelbase: 3,682 mm, overall weight: 3,500 kg, empty load weight: 2,135 kg, maximum load weight: 1,365 kg, first registration: 07/2020, next inspection (TÜV): 04/2028, loading space length: 3,128 mm, loading space width: 1,753 mm, loading space height: 1,890 mm, fuel tank capacity: 105 l, emission class: euro6, color: white, tire size: 225/65R16C M+S, number of seats: 3, number of previous owners: 1, total length: 5,548 mm, total width: 2,070 mm, total height: 2,482 mm, tire condition: 75 %, fuel: diesel, number of gears: 6, Equipment: ABS, AdBlue, USB port, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), full service history, immobilizer system, onboard computer, parking sensors, power assisted steering, power mirror, seat heater, sliding door, soot filter, traction control, truck registration, winter tires, Very clean and exceptionally well-maintained, accident-free lease return vehicle with high-quality special equipment, from first owner, non-smoking vehicle, Opel Movano B panel van L2H2, Euro 6 with truck registration, Sortimo cargo area package with 3-fold LED lighting, 270° rear wing doors, rear parking sensors, cruise control, 3-seater with Multiflex passenger double seat bench, Isringhausen comfort driver's suspension seat with center armrest, pneumatic lumbar support adjustment, and integrated seat heating, M+S winter tires, etc. ABS electronic Storage compartment above the windshield Dual airbags Exterior mirrors, electrically adjustable and heated Sheet metal insert without window, driver's side On-board computer Tachometer ESP and ASR Power windows, front Transmission: 6-speed gearbox Seat belts: 3-point safety belts in the front Headrests (3), height-adjustable Paint: Solid color Cargo area: Sliding door, right Credpfx Aio Aia Dvezji LED cargo area lighting Sortimo cargo area floor, washable Sowaflex cargo area lining, side up to roof height, washable Steering column, height-adjustable Upholstery - Fabric Quickheat rapid heating system Radio 15 USB Tires: Tire repair kit Diesel particulate filter with SCR Euro 6 Wheels: Steel wheels 6.5 J x 16 Crosswind assist Power steering Visibility package Seat: Passenger multifunctional double seat bench with storage compartment Seat: Isringhausen comfort driver's suspension seat with center armrest, seat heating, and pneumatic lumbar support adjustment Socket, 12 volts, front Daytime running lights in LED Blind spot mirror in passenger sun visor Partition, closed Anchoring points in the cargo area Tie-down points on the loading area Immobilizer Heat protection glazing, green tinted Central locking with remote control Rear wing doors, 270°, sheet metal Speed limiter Air conditioning with pollen filter Parking pilot Socket, 12 volts, in the cargo area Rear step, integrated into the bumper Tie-down points, side, cargo area Completely documented, serviced according to the Opel dealer's service schedule. Last service performed in 07/2024 at a mileage of 123,851 km. Front axle brake discs and brake pads in new condition, rear axle brake pads new. Oil service will be performed before sale! Vehicle available immediately. If you have any questions, please feel free to contact us by phone. The vehicle description serves only to describe the vehicle and does not constitute any guarantee in the legal sense. Accessories information is without guarantee, subject to changes, prior sale, and errors! We are a member of the Federal Association of Independent Car Dealers (BVfK) and hold the BVfK quality seal!

Condition: excellent (used), functionality: fully functional, mileage: 2,04,020 km, power: 73 kW (99.25 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, wheelbase: 3,062 mm, first registration: 03/2023, next inspection (TÜV): 04/2027, loading space length: 2,150 mm, loading space width: 1,520 mm, loading space height: 1,210 mm, emission class: euro6, color: white, tire size: 205/60R16 96H Continental, Profil ca. 70%, number of seats: 2, number of previous owners: 1, machine/vehicle number: WFOSXXWPGSNA76022, Equipment: ABS, air conditioning, airbag, central locking, electronic stability program (ESP), fog lights, immobilizer system, onboard computer, parking sensors, power assisted steering, sliding door, soot filter, summer tires, traction control, truck registration, winter tires, Very clean and well-maintained accident-free lease return vehicle from a private owner with high-quality special equipment, non-smoking vehicle, long-distance company vehicle Ford Transit Connect 240 long L2 Trend, Euro 6 with truck registration, rear wing doors with windows, partition with window and protective grille, PDC, 8 tires – aluminum rims with Continental tires and additionally 4x M+S Continental winter complete wheels, etc. • 6-speed transmission • ABS with EBD • Exterior mirrors, electric, adjustable and heated • Hill start assist • Rubber floor covering, with original Ford rubber floor mats at the front, removable • On-board computer with outside temperature display • Brake light, third • Diesel particulate filter • Double-wing rear door with window • Full partition with window and protective grille • Electronic safety and stability system • Electric windows front • Ford Easy Fuel • Ford Pass Connect • Heated windshield Csdpfxe Aia Drj Aizsri • Glove compartment with lid • Interior lighting, rear • Interior lighting, front • Air conditioning incl. electric recirculation control • Cargo area floor protection, plastic, molded • Cargo area lining, side, half-height • Steering column, adjustable • Center console, front • Fog lights • Emergency brake light • Radio: Ford Audio System 2 • Seat package - 4 • Sliding door, rear, right • Side protection strips, plastic • Power steering, electro-mechanical (EPAS) • Safety brake assistant • Seat belts • Automatic central locking • Front spoiler lip • Start-stop system • Dust and pollen filter • Storage compartment, concealed, on dashboard • Socket in storage compartment • Socket on center console, front • Front bumper, body color • Daytime running lights • Child safety lock on sliding doors • Tie-down eyes • Immobilizer, electronic (EPATS) • Heat-absorbing glass, lightly tinted • Central locking with remote control • Auxiliary heater, electric (PTC), front • 2nd remote control key for central locking • Heated rear window • Rear parking pilot system • Cargo area dimensions: Length 2,150 mm, Width 1,520 mm, Height 1,210 mm • Euro 6 Fully maintained according to service schedule. Last Ford service was performed in 12/2025 with a mileage of 178,652 km. Front brake pads and battery new! Vehicle available immediately. If you have any questions, please do not hesitate to contact us by phone. The vehicle description is for informational purposes only and does not constitute any warranty in the legal sense. Information on accessories is without guarantee, subject to changes, prior sale, and errors! We are members of the Federal Association of Independent Car Dealers (BVfK) and carry the BVfK quality seal!

Condition: used, mileage: 1,66,700 km, power: 75 kW (101.97 HP), first registration: 12/2023, fuel type: diesel, CO₂ emissions: 130 g/km, fuel consumption (urban): 5.4 l/100km, fuel consumption (extra-urban): 4.7 l/100km, fuel consumption (combined): 4.9 l/100km, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 4,960 mm, loading space length: 2,500 mm, loading space height: 1,300 mm, Year of construction: 2023, Equipment: ABS, front-end loader, - Used Light Truck: Citroen Jumpy Van L2 / Medium Wheelbase. - Registration: December 2023, Engine: 1,500 TD 100 hp Euro 6d, 6-speed gearbox, Mileage: 166,700 km. - L2 van, 3 seats, Cargo compartment dimensions: 2,500 x h. 1,300 mm, Half-height paneling. No. 6 cargo securing hooks, Payload: 10.3 quintals. - Equipped with: Air conditioning, Bluetooth radio with USB, Rear parking sensors, Cruise control, On-board computer, Double keys, Driver and passenger airbags, ABS, ESP, TCS. - Bodywork and interior in good condition, Mechanical components in good working order. - All-season tires with 80% tread remaining on the front and 95% on the rear. - Single owner vehicle. _____ CARLO MAURI S.r.l. - Lurago d'Erba - Via Vallassina 6 - Tel. 031.699.049 - Sales Representatives: Emanuele, Luca, Giuseppe, Davide. - Lurago d'Erba (Province of Como), Lombardy. Opening hours: Monday to Friday: 8:30 AM / 12:15 PM - 2:00 PM / 7:00 PM Saturday: 8:30 AM / 12:00 PM - 2:00 PM / 5:00 PM - Certified Mileage. - Test drive possible by appointment. - Ownership transfer can be arranged on-site. - Customized financing options available. Carlo Mauri Srl declines all responsibility for any unintentional inaccuracies in the advertisement, which does not constitute any contractual obligation. The prices shown are exclusive of VAT and transfer fees. Credpfx As Aia Dgeizsi

Condition: used, functionality: fully functional, overall weight: 1 kg, total length: 150 mm, total width: 100 mm, total height: 100 mm, input voltage: 24 V, B&R X20SL8101 SafeLOGIC Safety Controller – Ethernet POWERLINK Programmable safety controller from the B&R X20 series with an integrated bus controller, POWERLINK interface, and openSAFETY communication for industrial safety applications. Manufacturer: B&R Industrial Automation Type: X20SL8101 Series: X20 SafeLOGIC Module type: Safety controller / Central unit Integrated bus controller: Yes Safety communication: openSAFETY Maximum number of SafeNODEs: 280 Programming: Automation Studio / SafeDESIGNER Safety level: Up to SIL 3 according to IEC 61508 / IEC 62061 Performance Level: Up to PL e, Category 4 according to ISO 13849-1 Interface: Ethernet POWERLINK POWERLINK function: Controlled Node Connections: 2 x shielded RJ45 ports (integrated hub) Transmission standard: 100BASE-TX Transmission rate: 100 Mbit/s Maximum cable length: 100 m between two nodes Minimum fieldbus cycle time: 200 µs Minimum X2X link cycle time: 200 µs Autonegotiation: Yes Auto-MDI/MDIX: Yes Operating mode: Half-duplex Standalone operation: Yes Dynamic Node Allocation (DNA): Supported Supply voltage: 24 V DC (-15 % / +20 %) Maximum input current SL/BC/X2X: 0.9 A Power consumption: 5.3 W Power consumption I/O internal: 0.6 W Power consumption X2X link supply: 1.42 W Credpfx As Aia A Ueizji Output rated power SL/BC/X2X supply: 7 W I/O output rated voltage: 24 V DC Permissible contact load I/O supply: 10 A Maximum number of function block instances: 4096 Memory for flags: 262,144 bytes Stack memory: 32,768 bytes Memory for safe input data: 6144 bytes Memory for safe output data: 2048 bytes Storage medium: Replaceable SafeKEY Potential isolation: Fieldbus to X2X link and I/O Cooling: Fanless Status indicators: CPU, POWERLINK, SafeKEY Protection class: IP20 Operating temperature in horizontal mounting: 0 to +60 °C Operating temperature in vertical mounting: 0 to +45 °C Storage temperature: -40 to +85 °C Relative humidity: 5–95 %, non-condensing Dimensions (W x H x D): 62.5 x 99 x 75 mm Weight: 190 g B&R ID code: 0xE649

Condition: used, functionality: fully functional, input voltage: 24 V, B&R X20SI9100 Safety Input Module – 20 safe digital inputs Crsdpfo Aia A Rox Aizei Safety-related digital input module from the B&R X20 series with 20 safe inputs and 4 pulse outputs for industrial safety applications. Manufacturer: B&R Industrial Automation Type: X20SI9100 Series: X20 SafeIO Module Type: Safety-related digital input module Number of safe digital inputs: 20 Input type: Type A Input circuit: Sink Input characteristic: Type 1 according to EN 61131-2 Nominal voltage: 24 V DC Voltage range: 20.4–28.8 V DC Input current at 24 V DC: 2–3.28 mA Input resistance: At least 7.33 kΩ Switching threshold low: 5 V DC Switching threshold high: > 15 V DC Hardware input filter: ≤ 150 µs Software input filter: 0–500 ms, adjustable Error detection time: 200 ms Number of pulse outputs: 4 Output type: Push-Pull Output nominal current: 50 mA per output Total nominal current: 200 mA Output protection: Channel-wise shutdown in case of overload or short circuit Power consumption bus: 0.4 W Power consumption I/O internal: 1.6 W Potential isolation between channel and bus: Yes Isolation voltage between channel and bus: 500 Vrms Safety level: Up to SIL 3 according to IEC 61508 / IEC 62061 Performance Level: Up to PL e, Category 4 according to ISO 13849-1 Protection class: IP20 Operating temperature in horizontal mounting: 0 to +60 °C Operating temperature in vertical mounting: 0 to +50 °C Relative humidity: 5–95 %, non-condensing Grid dimension: 25 mm Status indication: LED indicators for channel status, operating status, and module status Compatible bus module: X20BM33 / X20BM36 Compatible field termination block: X20TB52 (2 pieces required per module) Available quantity: 3 pieces

Condition: used, Year of construction: 2019, Air-cooled industrial chiller for cooling process water, equipped with two scroll compressors and an integrated refrigeration circuit. A circulation pump is missing. Manufacturer: REHSLER Kühlsysteme GmbH Model: TAE EVO tech 201 Serial number: 2200 339 696 Year of manufacture: 2019 Cooling medium: Water Refrigerant: R410A Refrigerant charge: 11.8 kg Number of compressors: 2 scroll compressors Voltage: 400 V Phases: 3 Frequency: 50 Hz Installed electrical power: 26 kW Maximum current draw: 44 A Protection class: IP54 Maximum operating pressure, water circuit: 6 bar Maximum water temperature: 35 °C Maximum refrigerant pressure, low-pressure side: 29.5 bar Maximum refrigerant pressure, high-pressure side: 42 bar Sound pressure level: 71.3 dB(A) Permissible ambient temperature: -20 to +43 °C Weight: 692 kg Cooling: Air-cooled Cjdpfx As Aiaxboizjri Condenser: Plate heat exchanger with axial fans Number of visible axial fans: 2 Missing component: Circulation pump with 1.1 kW motor, 400 V, DN32 pressure connection