Compressed-air technology Offers
15
Schneider compressor system with refrigeration dryer and container 1000l.
Ieve0x0
Suction capacity 1250 l / min
Filling capacity 980 l / min
Cylinder / stages 2/2
Switch-on / switch-off pressure 8/10 bar
Voltage 400/50 Hz
Container volume 10l
Speed 1240 min -1
Motor power 7.5 kW
Weight 170 kg
5
Screw compressor, oil free
Max. pressure: 7,5 bar
Electric power: 113 kW
Speed: 2950 1/min
Oyz72
3
ALMIG ALM1320400 1014007 Refrigerant dryerModel year 2014
Fe7xyxz
5
Stainless steel tank, container tank, pressure vessel, pressure tank, silo system, transport silo, tank, fertilizer storage silo
-Material: stainless steel
-Transport protection frame
-Content: 1500 ltr
-permissible operating pressure: 1 bar
-Mannhole
T0pmi2a02
-Fill and drain screw connection
-Dimensions: 1000/1400/H3240 mm
-Weight: 300 kg
1
CompressorYear of construction: 2015Stationary piston compressorwith 2 two-stage compressing two-cylinder high-performance units made of grey cast iron for a long service lifeMaximum volume flow 2 x 960 l/minFilling capacity approx. 2 x 750 l/minMaximum pressure 10 barContainer capacity 500 lMotor output 2 x 5.5 kWMains connection 400 VADimensions L x W x H 2020 x 570 x 1340 mmSound pressure level 1 m distance according to DIN 45635 83 dB(A)with base load change control1. Unit 428 operating hour...
4
MAWP: 8,5 bar - 123 psi - 0,85 MPa; Qv: 118,1 l/s - 250,3 cfm - 7,09 m³/min; Voltage: 400 V; Freq.: 50/60 Hz; 3Ph
Psi9n
2
SCREW COMPRESSOR type KAESER SM 12
second hand
complete with 500 Lt. vertical tank and dryer unit
working hours 870
motor power Hp 10 ( Kw 7,5 )
Suhpw0
working pressure bar 11
volt. 380/50
8
Used air dryer in good condition
Dryer type: refrigerant
Environment: Air
Troughput,: 8000 liters/min
Dew point: 3°C
Electrical power: 203 V / 50 Hz
Cooler liquid: R407C-1, 20 kg
Overallsize: 750 x 550 x 950 mm
Weight: 105 kg
P03bv78z
5
Dear interested parties,
we offer here a compressor motor ready for connection.
Gwptpc
This was part of a stock and therefore has no operating hours.
5
Oil-water separation system, oil-water separator, condensate separator
The inexpensive and permanently reliable solution to the problem is usually the oil/water separation for dispersed condensates.
The purified water meets the legal requirements for sewer discharge
-Number: 3x filters available
Uoqhigujf
-Price: per piece
-Dimensions: 680/750/H1140 mm
-Weight: 45 kg
5
power capacity --- kW
feed pressure --- bar
liter capacity --- l
operating pressure 11 bar
Pvosga
volume 1500 L
11
Atlas Copco SF 15 Scroll compressor
oil-free air, silent operation
Year of construction: 1999
Working hours: approx. 95.177
max power: 14.8 KW
Working pressure: 8 bar.
Free air delivery: 25.2 l/s
4 Scroll compressors inside, cascade setup scroll compressors are programmed to follow up on each other in regard to compressed air demand.
1 scroll compressor wrong, switched of operation.
Bvxh33rsgx
For more info please inquire.
1
SCREW AIR COMPRESSOR type FINI ROTAR KSC 10
second hand machine
Buictrkwcm
motor power Hp 10 ( Kw 7,5 )
bar 10
lt / min. 900
volt. 380/50
7
Inlet/outlet diameter: 80 mm
Bslt3zf38s
Optimal temperature: +2 - +43 Celsius degree
Refrigerant type: R22
Refrigerant amount: 7,5 kg
Voltage: 400 V
9
The compressor is in good condition and maintained. During the maintenance has been exchanged the oil, oil filter and air filter.
- Working hours only 1527h and on load 699h
- A simple and reliable construction
- Top on 200L air tank
- Compact
- Control unit Boge Basic, where it is possible to change the compressor pressure and other important operating parameters, displays a variety of error messages and future maintenance.
Warranty 6 months.
It is possible to get from us the air dryer, air ...
5
Screw Compressor, Compressor, Compressed Air Unit, Stationary Air Compressor
-Delivery quantity: 4.0 m³/min
-Motor power: 30 kW
-Construction: encapsulated
Lvzy7
-Max. Pressure: 10 bar
-Operating hours: 22.004 H
-Idle hours: 10,090 H
-Dimensions: 820/1700/H1930 mm
-Weight: 732 kg
2
Receiver 500 L
Max. pressure 16 bar
Dimensions (LxWxH) 200 cm Höhe
Bwdxldqelb
9
For sale 1 piece, AF Belgium RS 15 Screw compressor.
Manufacturer: AF Belgium
Condition: Used, tested, nice condition. (483 operating hours!)
Data: Industrial screw compressor, with pressure gauge and temperature gauge, with removable side plates. The interface is designed at the bottom. With automatic Y / Δ switching, after safety with cooling.
Motor: Nistra Motoren NCH 160 M2-2, 380-420V Δ / 660-720V Y 50 Hz
26.7 A / 15.43 A, 2930 rpm, 15 kW
Compressor: Renner NK60-V012, 18.5 bar max. 110 ° C ...
5
feed pressure: 12,8 bar
liter capacity: l
total power requirement: 11,0 kW
volume capacity: 20,9 l/s
machine weight approx.: 299 kg
switched on hours: 82386 h
operating hours: 13657
Compressor with Electric Motor
- Atlas Copco Elektronicon II Control
- pressure tank make Kaeser, YOM 1989, 150 liter, max. pressure 11 bar
- condensate separator type Atlas Copco OSW 11
- dimension compressor: L: 1,3 x W: 0,8 x H: 1,24m
- dimension pressure tank: Ø 450 mm x H: 1,26 m
Mvfxio
- dimension condensate -...
15
Screw compressor screwcompressor
Compressor manufacturer: Demag / CompAir
Series: Marathon 251
Type: MA 251 A.
Power: 132kW
Volume: 22m3 / min
Operating hours: 53800
Incl. Grassair pressure tank 2000L
Cgipbwoy
Incl. Grassair P3090F air dryer (2003)
Incl. Grassair oil separator
2
output 380 Volt/32AP
volume 50 L
Bfgpghtpsi
weight of the machine ca. 6,4 t
5
Oil-water separation system, oil-water separator, condensate separator
-The cost-effective and permanently reliable solution to the problem is usually the oil/water separation for dispersed condensates. The purified water meets the legal requirements for sewer discharge
-Number: 1x filter available
-Price: per piece
Iqfqyuz
-Dimensions: 460/500/H950 mm
-Weight: 32 kg
6
feed pressure 10 bar
Power 5.5 KW
Bwcvl7oyzb
Receiver / L
volume flow 0,72 m³
weight ca. 450 kg
intake pressure 1,0 bar
2
power capacity 5,5 kW
feed pressure 10 bar
liter capacity 920 l/min
Number of cylinders 2
Receiver capacity 350 l
F30jfmz
voltage 380 V
total power requirement 5,5 kW
weight of the machine ca. 400 kg
dimensions of the machine ca. 2,10 x 0,75 x 1,35 m
- Serial-No.: 497444
- Compressor ON: 4.854 h
3
feed pressure 8 bar
liter capacity 1,200 m³/min
Number of working hours 28869 h
turning speeds 3000 U/min
total power requirement 7,5 kW
weight of the machine ca. 0,235 t
Hm2lhcy0c
dimensions of the machine ca. 480 x 990 x 1235 mm
Soundproof screw compressor with electronic control
- refurbished -
3
The screw compressor WALTER SFTG 11 SXP COMBO was produced in 2021. It is supplied with the WALTER WDF 100 refrigeration dryer.
Characteristic data of the WALTER SFTG 11 SXP compressor:
- working pressure: 10 bar
- capacity: 1500 l / min.
- power: 11 kW
- connection: R 3/4 "
Gxzoes
- machine dimensions (length x width x height): 2100 x 650 x 1708 mm
- weight: 467 kg
- WDF dehumidifier with 1 and 0.01 micron filters
6
a used very well-preserved compressed air system consisting of a screw compressor RENNER RS-22 including cyclone separator with automatic. Condensate drainage
Air dryer BOGE DS60
Oil and water separator ÖWAMAT BEKO 5R
Filter Parker ANK Zander 800 G13XP4E and G13XP4
Control to the dew point monitoring
Bquy8xt
further technical data see PDF document.
5
Oil-water separation system for compressors
-Plant for separating oil from water
Qksqxaz2p
-Nominal output: approx. 10 liters/h
-Operating voltage: 380 volts
4
Speed 3000 U/min.
intake pressure 1,0 bar
weight 205 kg
total power requirement 7.5 kW
Phase: 400V
Volume rate of flow: 1,06m3
Jw2dfe
Stage pressures: 10 bar g
Suction Pressures: 1,0 bar
Full load curennt: 17A
Speeds: 3000 U/min.
Installed motor capacity: 7,5kW
6
feed pressure: 10 bar
liter capacity: l
total power requirement: 16 kW
output: 15 KW
volume capacity: 1.93 m³/min.
Number of working hours: 2 h
noise level: schallschutzgedämmt dB(A)
machine weight approx.: 550 kg
dimensions L x W x H: 1,9 x 0,7 x 1,65 m
Oil-Injected Screw Compressor - unused /slight deformation on the sheet metal)
Consists of:
1. Compressor:
- max. 10 bar working pressure, output 15 kW, volume flow 1.93 m³/min. turning tool 2.940 rpm.
2. Air pressure tank:
- type ADAT 510, op...
3
used screw compressor
Year of manufacture 2011
regularly serviced
speed controlled
Motor 7,5 kW
1050 l/min
Bxt8ai28ll
with refrigeration dryer
10 bar
Noise level 63 db(A)
Weight 210 kg
Availability: Short term
Location: Solingen
4
Сompressor technical data:
Power, cubic meters 10,2
Max. pressure, atm 10
Power, kW 75
Overall dimensions., Mm 1610x850x1355
Bzibolrjgl
Weight, kg 1050
Air dryer technical data:
Working pressure, bar 17
Maximum pressure, bar 22
Operating temperature, ° C 36
Power, kW 5,45
The amount of charge, kg 3,97
4
feed pressure 10 bar
Effective free air delivery 650 L/min
motor 400 V
0 270 Liter
total power requirement 5,5 kW
** Exhibition machine / not yet in use
** List price: 3,210 euros
Ben7zk37w3
Furnishing:
- stationary industrial piston compressor
- with the property lying down
5
pneumatic piston pumps, airless high pressure pump, air motor, AIR MOTOR
-Material volume: max. 14.8 l/min
L8ehp
-Max. Pressure: 240 bar
-Material temperature: max. 70 °C
-Dimensions: 485/540/H940 mm
-Weight: 32 kg
4
2 working Oldtimer Industrial Compression devices made in Germany
Bztzki929s
3
operating pressure: 13 bar
volume capacity: -
voltage: 230 V
air-pressure connection: Aus- und Eingang: 1" Zoll
total power requirement: 0,54 kw
weight: ca. 52 kg
dimensions L x W x H: 0,8 x 0,4 x 1,0 m
7nkgtxinl
- dehumidifying of compressed air
- working pressure air conditioning max. 35 bar
- refrigerant R 134 A
- heat exchanger
- size 320 x 180 x 315 mm
- fan dia. = 260
Kaeser Aircenter SK 22
Manufacturer: Kaeser
Bwwz9hp
Type: Aircenter SK 22
Year of manufacture: 2012
Condition: used, ready for use
Load hours: 3300h
Operating hours: 18187h
Pressure 11 bar
Effective delivery rate at 10 bar* 1,68 m³/min
Nominal power drive motor 11 kW
Permissible pressure loss for exhaust air duct 30 Pa
Max. usable warm air volume 2,500 m³/h
Max. usable heat output "warm air" 13.2 kW
Max. usable heat output "Hot water" 9.4 kW
Required supply air opening 0.45 m²
Protection class d...
1
feed pressure 13 bar
Dwsby3
liter capacity 2,13 m³/min
total power requirement 18,5 kW
weight of the machine ca. 0,3 t
dimensions of the machine ca. 1x1x1,2 m
14
Professional plant of a renowned European manufacturer, which was stored for several years.
Scroll compressor SF-4SKID1: The air is compressed by the interaction between a rigid and a rotating screw.
-Oil-free
-Low noise
-10 bar
-3,7 KW
-Pressure tank 270 litres
Air dryer FD-40: The refrigeration dryer removes moisture from the compressed air by cooling it to near freezing point.
Bzd8brtyjo
-Maximum 13 bar compressed air
-0,54 KW
Documentation of the plant consisting of test documents, operating...
4
Emulsion splitting plant, oil-water separation system
Maoun
-The cost-effective and permanently reliable solution to the problem is usually the oil/water separation for dispersed condensates. The purified water meets the legal requirements for sewer discharge.
-Dimensions: 590/590/H1170 mm
-Weight: 58 kg
4
With capacitive measuring cell and ceramic measuring diaphragm.
Application: absolute and gauge pressure
2sx8ly
For Ex-protection area
- 0...400 mbar/40 kPa/6 psi
- Aluminium; screw connection M20, IP 66
5
Year 1993, Atlas Copco 365 MD, Mercedes-Benz diesel engine. Located in Europe. Delivery to any country. Detailed information and photos are on request.
Pdtox
9
The compressor is in good condition. During the maintenance has been exchanged the oil, oil filter, air filter and V-belts.
- The compressor is all in one with a compressed air dryer and a 200L air receiver.
- With a low noise level 61 dB
- In very good condition
- Later compressor is ready for immediate work. Just need to connect the compressor to the electricity socket and be ready to work.
Producer: Atlas Copco
Model: GX 3 FF
Year: 2006
Capacity: 318L/min, Max 10 Bar
Motor: 3 Kw
Working h...
6
feed pressure: 11 bar
liter capacity: l
total power requirement: kW
volume capacity: 3,34 - 13,53 m³/min.
Number of working hours: siehe Text/Beschreibung h
control: SIGMA CONTROL BUB
revolutions per minute of the motor:: 2.980 U/min. mit 90kW U/min.
interface: RS 232 + 485 + Profibus DP
protection class: IP 55
noise level: schallschutzgedämmt dB(A)
rated capacity: ca. 90 KW
machine weight approx.: 2020 kg
dimensions L x W x H: ca. 1,3 x 1,95 x 2,1 m
weight: ca. 1950 kg
screw compressors wit...
2
Fully functional 2 stck available, can be viewed
Bxcvz3hw8p
.
