Machine Fabriek J.H. Buitendijk

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 43 m/min, rapid traverse Y-axis: 43 m/min, rapid traverse Z-axis: 36 m/min, controller manufacturer: Heidenhain, controller model: iTNC530, total height: 2,450 mm, total length: 3,200 mm, total width: 2,850 mm, table width: 1,200 mm, table length: 600 mm, table load: 900 kg, overall weight: 6,500 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 8,039 h, coolant supply: 20 bar, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The Bridgeport XR1000 is special because it is a relatively heavy, high-quality vertical CNC milling machine that was built to be significantly stiffer, faster, and more accurate than standard VMCs (Vertical Machining Centers) in the same class. This machine has always been very well maintained by the previous owner (a sole proprietorship) and is therefore still in very good condition! The machine is very well-equipped with various options and can also be viewed in our showroom while in operation. Additional options & accessories: - Controlled 4-axis (NIKKEN CNCZ 105ZA) - 20 bar coolant through the spindle. - Air to the spindle (not through it) Nlsdpfxoy Uklme Aqvsb - Coolant flushing system, wash down and wash gun. - Heidenhain touch probe TS27R. - Chip conveyor - Electronic handwheel (Heidenhain) permanently mounted on the PLC. - Original documentation + manual for the 4-axis. Weight & dimensions: approx. 6,500 kg approx. 3,200x2,850x2,450 (LxWxH)

Condition: good (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 15 m/min, controller manufacturer: Fanuc, rotational speed (min.): 54 rpm, rotational speed (max.): 10,000 rpm, number of spindles: 1, type of input current: AC, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Here we offer a vertical machining center from the manufacturer YCM. The machine is in good condition and can be inspected and tested at any time. Free loading onto a truck. Nedpfey Uklgex Aqvelb Manufacturer: YCM Type: MV106A Year of manufacture: 2005 Control: Fanuc MXP-200i Technical data: Travel ranges X-Y-Z: 1020x600x600 mm Rapid traverse rate X-Y-Z: 24/24/15 m/min Feed rate X-Y-Z: 10,000 mm/min Clamping area: 1120x600 mm Workpiece weight: 800 kg Tool changer arm magazine 24 stations Spindle taper: ISO-40 Spindle speed: 45-10,000 rpm Spindle drive: 15 kW Two-stage gearbox Spindle oil cooler Internal coolant supply for spindle (IKZ): 20 bar Power consumption: 25 kVA Machine weight: 6500 kg Machine dimensions: 2580x3065x2730 mm Transport dimensions: 2300x3065x2600 mm

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 1,050 mm, travel distance Y-axis: 570 mm, travel distance Z-axis: 510 mm, controller manufacturer: SIEMENS, controller model: 828, table load: 1,000 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 18,500 W, number of axes: 3, This 3-axis DOOSAN DNM 5700 was manufactured in 2017. It features an X-axis travel of 1050 mm, Y-axis travel of 570 mm, and Z-axis travel of 510 mm. The machine is equipped with a powerful 18.5 kW spindle and a table size of 1300 × 570 mm, allowing for efficient machining operations. If you are looking to get high-quality machining capabilities, consider the DOOSAN DNM 5700 vertical machining centre we have for sale. Contact us for further details. • Table size: 1300 × 570 mm Nodpfsy Uki Ssx Aqvolb • Tool changer: 30 positions • CNC control: Siemens 828 • Condition: Very good; regularly maintained Technical Specification Taper Size ISO 40

Condition: good (used), Year of construction: 2018, HURCO VMX42i Vertical Machining Center Year of manufacture 2018 Control system: HURCO WinMax5 Travel distances: X – 1,067 mm / Y – 610 mm / Z – 610 mm Only approx. 3,600 spindle hours (as of March 25, 2026) Equipment: WinMax5 control system with removable electronic handwheel 2x 19” LCD color monitors (text + graphics) Network interface 2 software units (1x plain text dialog programming on the machine 1x for ISO code programming via external programming device or CAD/CAM system) Pentium technology, SSD (Solid-State-Drive) storage medium, 2 GB RAM, Ethernet interface, USB interface, System-internal self-diagnosis, WINDOWS platform Adaptipath Trochoidal milling for higher material removal rate, controlled feed rate and detection of residual material Simulation graphics Tool and material library Pocket milling with islands Synchronous thread cutting (Thread cutting without a compensation chuck) ISNC extended NC mode RENISHAW measuring probe RENISHAW workpiece and tool measurement Spindle cooler Chip conveyor Chip guard cabin Coolant system Coolant spray gun Flushing system to assist chip removal LED machine light in the working area Signal light for machine operating status Set of machine feet Programming and maintenance instructions via the control system help function High-pressure cooling system for coolant supply through the spindle Coolant type: emulsion Coolant pressure: 20 bar Integrated hydraulic tool clamping system WinMax PC software NC programming system WinMax PC Nedpfey Uhnrox Aqvelb with 3D-plus and DXF interface Technological features: Simple programming through plain text full dialog Easy operation via PC keyboard Easy control by switching from text display to graphics display Simple programming of the finished part contour On-line help in German Included in the scope of delivery: 2 hydraulic clamping vices approx. 50 tool holders, some with tools Operating manual Machine parameters on USB stick Technical data and control system – see PDF. All technical specifications, illustrations and content are non-binding and without warranty. Subject to change, errors and omissions. All other accessories visible in the photos and video are not included in the scope of delivery and are therefore not part of this sale. The scope of delivery only includes the accessories that are explicitly listed here, in the order confirmation and invoice. FCA (Free on Truck) D-32457 Porta Westfalica exclusively packaging Delivery time: immediately Subject to prior sale / Payment immediately upon completion of purchase.

Condition: used, Year of construction: 2018, operating hours: 4,500 h, MT Cut UDS1785 Travel distances: X 850 mm Y 520 mm Z 610 mm Nledpfey Ug Epox Aqvsb Tool interface: HSK 63 Rapid traverse rate X/Y/Z: 32 m/min Tool magazine: 60 positions Machine weight: 6,800 kg Control system: Heidenhain TNC 640 Coolant through tool, 50 bar Spindle speed: max. 12000 rpm Articulated band conveyor, discharge to the left Air through the spindle BLUM A2, laser system for tool measurement Measuring probe: Heidenhain TS 460 Rotoclear, rotating viewing window Emulsion mist extraction, SARA UC2D Year of manufacture: 2018 Spindle operating hours: 4512

Condition: excellent (used), Year of construction: 2018, operating hours: 10,500 h, functionality: fully functional, 2 same machines for sale. X / Y / Z - 1020/ 540 / 510 mm Table 1300 x 610 mm Max. table loading 650 kg Spindle revolutions 8 000 rpm Nlodpfxoy Udbns Aqvjb Machine dimensions 3200 x 2500 x 2500 mm Machine weight 6 500 kg

Condition: used, x-travel 1.000 mm y-travel 800 mm Nsdpfjy T Sb Tex Aqvolb z-travel 500 mm Control Heidenhain spindle tunring speed 15.000 U/min table dimensions 1.250 x 800 mm number of tool places 30 Pos. In our estimation, the machine is in good used condition and can be inspected under power by appointment. Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Subject to changes, errors in technical data and specifications, and prior sale!

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 1,020 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller manufacturer: FANUC, controller model: Series Oi-MB, total height: 2,200 mm, total width: 2,500 mm, table load: 850 kg, overall weight: 5,800 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 11,000 W, number of slots in tool magazine: 24, product length (max.): 3,200 mm, number of axes: 3, This 3-axis MIND MACH T. VMC 1000/A was manufactured in 2007. It features an X-axis travel of 1020 mm, Y-axis travel of 610 mm, and Z-axis travel of 610 mm. The machine includes a table size of 1200 x 600 mm and a maximum table load of 850 kg. If you are looking to get high-quality machining capabilities, consider the MIND MACH T. VMC 1000/A vertical machining center we have for sale. Contact us for further details. • Rotary table: No Nedpfxjy T R Hbe Aqvjlb • Table size: 1200 x 600 mm Technical Specification Taper Size BT 40

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: AB1038, travel distance X-axis: 1,160 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 1,160 mm, feed length Y-axis: 610 mm, feed length Z-axis: 610 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, controller manufacturer: Siemens, controller model: Sinumerik 840D, table width: 610 mm, table length: 1,320 mm, rotational speed (min.): 12,000 rpm, rotational speed (max.): 12,000 rpm, overall weight: 7,000 kg, tool length: 200 mm, tool weight: 5,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, This machine was not used for mass production. Accuracy: ±0.01 mm. It has been regularly maintained, both electronically and mechanically, e.g., new ball screws were installed one year ago. Equipped with an oil mist separator. Njdpfxsy T Nggo Aqvolb It is in daily use until the end of June 2026 (and can be viewed in operation until then). Net price.

Condition: excellent (used), Year of construction: 2016, operating hours: 8,800 h, functionality: fully functional, Control unit: OSP-P300M-R Table dimensions: 1300 x 560 mm Table load: max. 900 kg X-axis travel: 1050 mm Y-axis travel: 560 mm Nodpfx Aey T Nfcjqvolb Z-axis travel: 460 mm Distance between spindle nose and table surface: 150 – 610 mm Spindle speed: 12000 rpm Rapid traverses: X/Y: 40 m/min, Z: 32 m/min Drive power: 22 / 18.5 kW Taper: BT40 / MAS 403 Tool magazine: 32 stations Max. tool length: 300 mm Max. tool weight: 8 kgs Max. tool diameter: D80 mm Weight: 7500 kgs Dimensions (L x W x H): 3200 x 2500 x 2750 mm Accessories / Equipment: - MAYFRAN chip conveyor - Coolant system - Spindle cooler - Transformer - Mac NAVI - TAS-C - Machine feet - Documentation The machine is being sold due to company liquidation. It is still under power in Hungary.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 4,220 h, travel distance X-axis: 1,050 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller manufacturer: MAZATROL, controller model: Matrix Nexus, table width: 550 mm, table length: 1,300 mm, spindle speed (max.): 12,000 rpm, number of axes: 3, This 3-axis Mazak VERTICAL CENTER NEXUS 510C-II was manufactured in 2008. It features a Mazatrol Matrix Nexus control unit and has a total operating time of 17,659 hours. The machine is equipped with advanced software options, including high smoothing control and various machining cycles. If you are looking to get high-quality machining capabilities, consider the Mazak VERTICAL CENTER NEXUS 510C-II vertical machining centre we have for sale. Contact us for further details. Nedpfoy T Hbzox Aqvslb - Total Operating Time: 17,659 hours 12 minutes 03 seconds (Recorded on 2026/02/19)- Automatic Cutting Time: 6,129 hours 38 minutes 37 seconds- Automatic Machining Time: 5,877 hours 48 minutes 01 seconds- Operating Time / Power On Time: 26,902 hours 54 minutes 33 seconds- Feed Rate Override Display: 50%- Feed Speed Display: 150 mm/min- Electrical Drives/Servo System: Mitsubishi Electric MDS series (400V system)- Additional System Interfaces: Renishaw Machine Interface MI12 (integrated inside electrical cabinet for probe system)- Safety Module: Mazak Safety Relay Module (QS-VMI100R-10)- Installed Options (Software/NC Options Enabled):* EIA / EIA 3D Comp. / EIA Herical Tap Cycle / EIA Pattern Cycle* High Smoothing Control* Spiral* Rotation* Geometric* Scaling* Ext-Data I/O* Inverse Time* Auto TLM* Polar Coordinates Input* Comparison Stop* G54.1* Sync. Mill Tapping / Sync. Main Sp. Tapping* Inch/MM Convert* G00 Slope Const.* Scale Feed Back* Variable 600 Sets* IC Card Running* Tilted Working Plane* Re-Thread* Pitch Error Comp.* Tap Retraction- Coolant/Hydraulic Accessories: External tank base with dual motor-pump units and filtration assembly (including a manual visual indicator pressure/bypass filter)- Extraction/Exhaust Accessories: Fitted with a flexible corrugated overhead extraction duct (mist/smoke extractor hose connection)

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 1,067 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller manufacturer: HURCO, controller model: MAX5, overall weight: 6,850 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, number of axes: 3, This 3-axis Hurco VMX 42i was manufactured in 2018 and features X, Y, and Z travels of 1067 mm, 610 mm, and 610 mm respectively. It boasts a maximum spindle speed of 12000 rpm. If you are looking to get high-quality milling capabilities consider the Hurco VMX 42i machine we have for sale. Contact us for more information about this machine. • Tool magazine capacity: 30 tools • Spindle hours: approx. 7,800 h • Machine weight: approx. 6,850 kg • Total power requirement: approx. 28 kVA • Internal coolant system Additional equipment • Chip conveyor Software Features Adaptipath: Trochoidal milling for higher removal rates, controlled engagement, and residual material detectionDialog / NC Mix: Allows mixing of Dialog and NC programsNCPP (Industry Standard Software): • ISNC extended NC mode for FANUC compatibility (FANUC 0) Njdpey Tw R Hofx Aqvolb • Parameter and MACRO programming • Subprogram technology for NC modeUlti-Motion: • Dynamic Lookahead (up to 10,000 blocks) • Improved surface quality via "Motion Control Technology" • Reduced cycle times and machine wearStandard Features: • Simulation graphics • Pocket milling with islands • Synchronous tapping (without compensation chuck) Hardware Components & Accessories • Cooling & Chips: • High-pressure coolant system (Through-Spindle Coolant) at 20 bar (Emulsion type) • Spindle cooler • Standard coolant system with spray gun • Chip conveyor and flushing system for chip removal • Chip splash guard cabin • Tooling: Integrated hydraulic tool clamping system • Workspace: • LED machine light • Signal light for operating status Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 1,067 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, overall weight: 6,850 kg, number of slots in tool magazine: 24, number of axes: 3, This 3-axis Hurco VMX 42i was manufactured in 2013 and features X-Travel of 1067 mm, Y-Travel of 610 mm, and Z-Travel of 610 mm, with a tool holder SK40. If you are looking to get high quality milling capabilities consider the Hurco VMX 42i machine we have for sale. Contact us for more information. Nsdpjy Tw Ryefx Aqvslb • Spindle hours: approx. 12,603 h • Total power requirement: approx. 28 kVA Additional equipment • Chip conveyor • Internal coolant system Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2011, operating hours: 2,502 h, travel distance X-axis: 1,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, overall weight: 6,000 kg, spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 24, number of axes: 3, This 3-axis KONDIA A10 vertical machining centre was manufactured in 2011. It features a travel of 1000 mm on the X-axis, 500 mm on the Y-axis, and 500 mm on the Z-axis. The machine is equipped with a spindle speed of 8000 rpm and a tool capacity of 24 slots. If you are looking to get high-quality machining capabilities, consider the KONDIA A10 machine we have for sale. Contact us for further details. Nlodpsy Twd Tofx Aqvob - Travel X-Axis: 1000 mm- Travel Y-Axis: 500 mm- Travel Z-Axis: 500 mm- Rapid Traverse: 20 m/min- Spindle Speed: 8000 rpm - Tool Capacity: 24 slots- CNC Control: Heidenhain iTNC 530- TE Electronic Unit Type: TE 520B- Control On Hours: 17849 h- Machine On Hours: 11292 h- Program Run Hours: 2726 h- Spindle Run Time: 2502 h- Total Power Installed: 37 kW- Year of Manufacture: 2011- Machine Weight: 6000 kg- Voltage / Frequency: 400 V / 50 Hz- Air Pressure: 6 bar- Scope of Delivery: touch probe

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 540 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, table width: 620 mm, table length: 700 mm, number of slots in tool magazine: 24, Equipment: documentation/manual, MIKRON VCE 600PRO VERTICAL MACHINING CENTER, MANUFACTURED IN 2011 EQUIPPED WITH HEIDENHAIN iTNC 530 ELECTRONIC HANDWHEEL TRAVELS: X 600, Y 500, Z 540 MM TABLE SURFACE: 700 x 620 MM 24-TOOL RANDOM TOOL CHANGER SPINDLE AT 10,000 RPM, 18 KW SPINDLE COOLING Nedpfxoy Tvr Nj Aqvslb DUAL CHIP CONVEYOR LINEAR SCALES INTERNAL COOLING AT 18 BAR TOOL MEASURING PROBE

Condition: like new (used), Year of construction: 2019, operating hours: 2,352 h, functionality: fully functional, travel distance X-axis: 900 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: FANUC, controller model: 31i-B, workpiece weight (max.): 700 kg, table width: 500 mm, table length: 1,000 mm, table load: 700 kg, rotational speed (max.): 20,000 rpm, spindle speed (max.): 20,000 rpm, operating hours of spindle: 2,352 h, coolant supply: 30 bar, spindle motor power: 22,000 W, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, DOOSAN NX 5500 II VERTICAL MACHINING CENTER YEAR OF MANUFACTURE: 2019 Nlodpsy Tvbkefx Aqvob CNC FANUC 31i-B SPINDLE: 20,000 RPM, 22KW, HSK-A63 TRAVEL: X 900, Y 550, Z 500 MM RANDOM TOOL CHANGER: 30 TOOLS, TOOL-TO-TOOL CHANGE TIME: 1.6 S DUAL CHIP CONVEYOR ELECTRONIC HANDWHEEL INTERNAL COOLANT SYSTEM: 30 BARS LASER PROBE FOR TOOL MEASUREMENT: RENISHAW NC4 PROBE FOR WORKPIECE MEASUREMENT: RENISHAW OMP60 WEIGHT: 9000 KG

Condition: used, Year of construction: 2006, functionality: fully functional, Machine dimensions: 2.9m x 2.8m x 2.9m Machine weight: approx. 7 tons Year of manufacture: 2006 Travel ranges: X 1050 Y 530 Z 510 (150 above table) Spindle speed: max. 12,000 rpm Motor spindle: SK40 Measuring probe: Renishaw OMP 60 Measuring head: Mazak Internal cooling pressure: 25 bar External cooling Nsdpfoy Tlu Tex Aqvolb Tool magazine: 30 positions Articulated belt conveyor Machine control: MAZATROL M640 • One machine each in left-hand and right-hand configuration (chip conveyor on the left or right) • Various tool holders can be purchased separately. • NO clamping devices (vices) included! • NO dust extraction system The stated price is for one machine only.

Condition: good (used), Year of construction: 2008, Traverses X Y Z: 1020 x 510 x 510mm, Table 1200 x 450mm, Nsdpfx Aoy Tka Usqvelb Spindle speed 8,000rpm, Spindle taper BT40, Spindle Motor 11kW, Fanuc Oi-MC Control, 24 Station ATC, Coolant, Low Volt light, swarf conveyor

Condition: good (used), Year of construction: 2012, functionality: fully functional, Posmill C 1000, Year of manufacture: 2012, Control system: Fanuc Oi 100, Travel range X/Y/Z: 1000/530/630 mm, Tool changer: 30-position, BT 40, Spindle speed: up to 10,000 rpm, Table size: 1150 x 560 mm, Maximum table load: 700 kg, Hexagon infrared measuring probe, Hexagon infrared tool measuring system, Nlodpfx Aqoy Thw Dsvjb IKZ: 20 bar.

Condition: good (used), Year of construction: 1997, Ready for demonstration under power. ++++ SPECIAL PRICE €5,900 ++++ Wemas VZ 1000, Year of manufacture 1997, Heidenhain TNC 407 control, Nsdpfx Aqey Thlbevslb Travel X/Y/Z 1016/610/660 mm, 4th axis, 20-position tool changer, SK 40 tool holder, Spindle speed up to 6,000 rpm, Table size 1300 x 600 mm, Coolant system, High-pressure coolant (IKZ) defective, Operating hours 43,000.

Condition: ready for operation (used), Year of construction: 2002, operating hours: 9,675 h, functionality: fully functional, controller model: U100M, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 32, number of axes: 3, An optional tool package worth €10,000 can be purchased for €3,500! TECHNICAL DETAILS X-axis travel: 1,050 mm Y-axis travel: 560 mm Nodpfx Aqsy S S Nnjvelb Z-axis travel: 460 mm Main spindle: 12,000 rpm MACHINE DETAILS Control system: U100M Axes: 3 Tool changer (ATC): 32 SK40 Cutting time: 9,675 h EQUIPMENT Documentation/Manual Speed infinitely adjustable Chip conveyor Coolant system Preparation for A-axis (4th axis)

Condition: ready for operation (used), Year of construction: 2001, travel distance X-axis: 1,120 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller manufacturer: MAZATROL, controller model: PC-Fusion-CNC 640M, total height: 2,651 mm, total width: 2,825 mm, table load: 800 kg, overall weight: 6,000 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 15,000 W, number of slots in tool magazine: 24, tool weight: 8,000 g, product length (max.): 2,915 mm, number of axes: 3, This 3-axis Mazak VTC 200 B was manufactured in 2001. It features an impressive X-axis travel of 1120 mm, Y-axis travel of 510 mm, and Z-axis travel of 510 mm. The machine includes a robust table size of 1460 x 510 mm and a maximum table load of 800 kg. If you are looking to get high-quality milling capabilities, consider the Mazak VTC 200 B vertical machining centre we have for sale. Contact us for further details. • Machining capacity: • Milling (S45 JIS): 416 cm³/min • Drilling (S45 JIS): 25 mm • Tapping (S45 JIS): M24 x P3 • Table: • Size: 1460 × 510 mm • T-slots: 5 • T-slot pitch: 100 mm • T-slot width: 18 mm • Table height: 750 mm • Spindle: • Spindle nose to table: Max 690 mm / Min 180 mm • Spindle center to column: 530 mm • Spindle motor: • 10 min: 15 kW • 30 min: 11 kW • Continuous: 7.5 kW • Max torque: 98 Nm • Rapid traverse: • X: 30 m/min • Z: 30 m/min • Cutting feed rate: • X: 8 m/min • Z: 8 m/min • Tool changer: • Tool type: CAT40 • Max tool Ø with adjacent tool: 80 mm • Max tool Ø without adjacent tool: 110 mm • Max tool length: 350 mm • Tool change time (chip-to-chip): 4.7 s • Coolant system: • Tank: 300 L • Pressure: 0.5 kg/cm² • Flow: 20 L/min • Electrical data: • Installed power: 22.7 kVA • Air supply: • Pressure: 5 kg/cm² • Consumption: 140 L/min • Standard equipment: • Full enclosure • Through spindle coolant • Automatic tool length measurement • Adaptive feed control • Tool life monitoring • Tool breakage detection • RS-232C interface • PCMCIA interface • 3.5" floppy disk reader • CE compliant machine • Side chip conveyor preparation Nedpfsy S Sw Sex Aqvjlb • Note: Machine is prepared for a side chip conveyor (conveyor not included) Technical Specification Taper Size ISO 40

Condition: good (used), Year of construction: 2004, operating hours: 6,400 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller manufacturer: Heidenhain, controller model: TNC 520, table width: 600 mm, table length: 1,200 mm, rotational speed (max.): 10,000 rpm, spindle speed (max.): 10,000 rpm, spindle motor power: 13,000 W, number of slots in tool magazine: 24, Vertical BAZ machining center, Maho DMC 103V - NEW SPINDLE Year of manufacture: 2004 Control system: Heidenhain 530 TNC Nljdpfx Aqoy S Rlbovjb Operating hours: approx. 6,700 hours Technical data: Spindle speed: 1 - 10,000 rpm Drive power: 13 kW Tool holder: SK 40 Number of magazine positions: 24 Travel distances: X-axis: 1,000 mm Y-axis: 600 mm Z-axis: 600 mm Direct linear encoder in all axes Table size: 1200x600 mm Accessories: Coolant system Preparation for 3D probe

Condition: used, Year of construction: 2008, 2008 Hardinge Bridgeport XV710 CNC Vertical Machining Centre With Siemens 810D Control Nlodpfxsy Sygue Aqvob Table Dimension 760 x 420mm (3 'T' Slots). 'T'-Slot Dimension 16mm. Maximum Table Load Approx 450kg. Axis Travel 'X'=711mm, 'Y'=457mm, 'Z'=457mm. Spindle Nose To Table Min/Max 150-580mm. Rapid Traverse 'X'=36m/min, 'Y'=36m/min, 'Z'=36m/min. Maximum Cutting Feedrate 12,000mm/min. Maximum Spindle Speed 10,000rpm (10HP Motor). Spindle Taper ISO 40 BIG-Plus. 20 Position ATC. S/No. 080011WM (2008). With Coolant System, Renishaw NC4 Laser Tool Presetter, Filtermist FX4000 Mist Extraction Unit, Signal Tower, Lubrication Grease (Direct Drive). & Handwheel. Weight 3,900kg.

Condition: excellent (used), Year of construction: 2013, 2013 Quaser MF400 5 Axis CNC Vertical Machining Centre with Tilting Rotary Table with Siemens 828D CNC Control Tilting Rotary (Trunnion) Table Dimension Ø320mm (4 'T' Slots). Maximum Swing Ø400mm. Maximum Table Load 100Kg. Axis Travel 'X'=410mm, 'Y'=610mm, 'Z'=510mm, 'A'=+30/-120Deg, 'C'=360deg. Rapid traverse 'X/Y'=36 m/min, 'Z'=25m/min. MAximum Cutting Feedrate 20m/min. Maximum Spindle Speed 15,000rpm (Motor 15/20HP). Spindle Taper BT40. ATC Capacity 30 Tools. Maximum Tool Ø76mm (Ø125mm non Adjacent Tools), Maximum Tool Length 280mm. S/No. (TBC) (2013) With Through Spindle Coolant, Filtermist FX6002 Mist Extraction Unit, Renishaw Spindle Probe Interface, Hand Wheel & Signal Tower. Note: Tooling & Work Holding Not Included. Nodpfx Aqoy Sya Uevslb