MachinesWork

Condition: used, Sacma cutting and slitting line: •Manufacturer of the line: Sacma S.R.L., Italy, Vigevano (PV) •Year of manufacture: 1975 •Electrical power: Voltage 400 V ± 10% - 50 Hz frequency •Compressed air: Pressure min/max 4.5 - 6 bar Kjdpfx Aozumm Dsb Hedr •Cycle time: Maximum unwinding speed is 12 m/min •Dimensions of the line: Length 23.5 m; width 4.8 m •Width of the coil: Min 300 mm / max 1280 mm (maximum coil weight 12 tons) •Length of the sheet: Min 450 mm / max 3000 mm •Material thickness: 0.4 - 1.0 mm

Condition: used, Year of construction: 2013, control type: CNC control, controller manufacturer: ELGA, working width: 3,100 mm, sheet thickness (max.): 6 mm, power: 10 kW (13.60 HP), input voltage: 400 V, input current: 25 A, input frequency: 50 Hz, type of input current: three-phase, operating pressure: 210 bar, pressure (max.): 210 bar, overall weight: 6,000 kg, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, safety light barrier, We offer this used UZMA HSB 3006 guillotine shear, year of construction 2013. Type: HSB 3006 Year of Manufacture: 2013 Series Number: 1308144 Maximum Cutting Length: 3100 mm Maximum Cutting Thickness: 6 mm Maximum Hydraulic Pressure: 210 Bar Kedpfx Abezt Hgus Hjdr Approximate Weight: 6000 kg Main Motor Power: 10 kW Voltage: 400 Volt Number of Phases: 3Ph + N + GND Frequency: 50 Hz Overall Full Load Current: 25 A Minimum Light Beam Distance from Blades: 1860 mm If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 1974, total length: 1,700 mm, total width: 1,400 mm, total height: 1,200 mm, Colour: Grey Weight: 1.000 kg - Year: 1974 - Documentation available: No - CE certificate present: No - Serial number: 72 Kjdpfx Ajzry Sujb Hedr - Drive system: Conventional - Drive type: Mechanical - Max. sheet thickness [mm]: 3 - Max. working width [mm]: 1050 - Backgauge type: Manual - Backgauge depth [mm]: 500 - Table type: Standard table - Transport dimensions: 1700mm x 1400mm x 1200mm (l x w x h) - Transport weight [kg]: 1000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), functionality: fully functional, Year of construction: 1996, Capacity: 1040 x 3.5 mm - Light gauge sheet metal protection at the rear - Ortlinghaus brake and clutch combination - Tilting roller table or sheet metal lifting system with plastic rollers - Central lubrication system Kedpfx Aezq Uvxeb Hodr

Condition: excellent (used), Electric Schröder plate shear – in top condition – ready for immediate use – retains its value. For sale is a Schröder plate shear with a hand-operated depth stop, in good technical and optical condition. 2x4mm. Includes loading. Sale: • Machine price (net) • You will receive a proper invoice with VAT shown. • Shipping or freight forwarding possible (upon request) • Inspection possible by appointment Please note: If interested, please contact us by phone. Kdsdszq Rwljpfx Ab Her Phone:

Condition: good (used), functionality: fully functional, Cutting length: 2020 mm Max. sheet thickness at 400 N/mm²: 5 mm Max. sheet thickness at 750 N/mm²: 3 mm Cutting angle approx.: 1.5° Strokes per minute: 40 strokes/min Back gauge approx.: 750 mm Kdedpfxjzpg U Ds Ab Hsr Stand throat depth: 200 mm

Condition: good (used), Press brake BOMBLED PARIS 250 M, serial no. 22018, working width 2,500 mm. Kdjdpfxoznlz Ho Ab Hjr

Condition: used, Mechanical Shear BOMBLED type 9G Capacity: 2500 mm x 4 mm Manual Back gear gauge travel: 500 mm Supplied with 2 front length stops Voltage: 380 V Dimensions (L x W x H): 4000 x 1500 x 1500 mm Kedjzku Hwspfx Ab Hjdr Weight: approx 4,5 T

Condition: used, functionality: fully functional, Year of construction: 2005, control type: manual, degree of automation: manual, actuation type: mechanical, sheet thickness (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness steel (max.): 5 mm, sheet thickness stainless steel (max.): 3 mm, overall weight: 13,200 kg, Equipment: emergency stop, finger protection, type plate available, - Model: CM 4005 - Year of manufacture: 2005 - Condition: used Kdedpszik E Tjfx Ab Hjr - Technical data: Weight 13,200 kg, Cutting length 4,050 mm, Blade length 4,200 mm, Working area 4,200 mm, Material thickness: Steel 5.0 mm, Aluminum 6.0 mm, Stainless steel 3.0 mm - Advantages: - High precision and reliability - User-friendly operation - Low maintenance and durable We offer a Colgar CM 4005 mechanical plate shear from 2005 for sale. The machine is designed for precise cuts with a cutting length of 4,050 mm and a blade length of 4,200 mm, and it allows for a working area of up to 4,200 mm. With a weight of approximately 13,200 kg, the shear is characterized by its robust industrial design. The Colgar CM 4005 is suitable for cutting various materials, including steel up to 5.0 mm thick, aluminum up to 6.0 mm thick, and stainless steel up to 3.0 mm thick. Several yellow clamping fingers along the cutting edge secure the material during operation. The front of the machine features a metal table with attached metal bars. The user-friendly control panel is equipped with a digital display and several colored buttons, including an emergency stop switch. Currently, "MANUAL 9.18" is displayed, which indicates the manual operating mode. The shear is painted blue and clearly displays the COLGAR logo. Signs of use, such as paint chips and superficial dirt, are present and correspond to the usual condition. These do not appear to affect the structural components but should be considered when assessing the machine. Overall, the Colgar CM 4005 mechanical plate shear offers high precision and reliability in a robust design that is suitable for a variety of metalworking applications. It is a low-maintenance machine for industrial use that combines a solid construction with practical features to increase operational efficiency. The following description is for guidance only and may not reflect all specifications or conditions. Please contact us if you require accurate or confirmed details. “The machine is sold in accordance with Incoterms® 2020 EXW [Frankenweg 2, 9100 Völkermarkt]. Once the machine is made available at the designated location, the buyer bears all costs and risks, including loading, transport and customs formalities.”

Condition: excellent (used), functionality: fully functional, NOVASTILMEC SHEARING MACHINE 2000 X 8 TYPE C 208 Ksdpfx Abszichme Hodr MOTORIZED BACK GAUGE USED MACHINE, IN WORKING ORDER INTERNAL CODE: SVR 308

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, machine/vehicle number: 00521120, MACHINE SPECIFICATION Maximum cutting thickness 1.5mm Maximum Cutting length 1030mm Shear angle 3 degrees Working pressure 7 to 10 bar Dimensions (L x W x H) 1380mm x 1210mm x 1300mm Approximate weight 195Kg MACHINE EQUIPPED WITH Squaring arm Kdjdpfjzia Nzjx Ab Hor Rear guarding Trailing footswitch

Condition: used, functionality: fully functional, CESOIA USATA MECCANICA VBV 2000x8 REGOLAZIONE MOTORIZZATO. Ksdpfxszh Eb Hs Ab Hodr

Condition: new, Year of construction: 2026, controller manufacturer: ELGO, controller model: PT40T, working width: 2,560 mm, cutting angle (min.): 1.3 °, stroke rate (min.): 31 1/min, sheet thickness (max.): 4 mm, sheet thickness steel (max.): 4 mm, power: 7.5 kW (10.20 HP), Equipment: CE marking, documentation/manual, emergency stop, type plate available, RGM 04-2560 – 4 mm x 2560 mm Mechanical Guillotine Shear The RGM 04-2560 Mechanical Guillotine Shear, manufactured in Turkey by CRONOSSTECH, is designed for workshops, metalworking facilities, steel service centers, and general sheet metal processing applications. It features a 4 mm sheet metal cutting capacity and a 2560 mm cutting length. Thanks to its monobloc welded body structure, motor-driven NC-controlled back gauge system, and high-precision cutting performance, it offers a reliable and cost-effective solution. Standard Features ELGO P40T Touchscreen NC Control Unit Rigid monobloc welded body providing maximum cutting accuracy 750 mm NC-controlled motor-driven back gauge system High-carbon/high-chromium blades Upper blade with 2 cutting edges Lower blade with 4 cutting edges Mechanical sheet holding system Manual blade clearance adjustment system Roller-type front worktable Kjdpfx Aszbq R Usb Hedr Front support arms with scale Illuminated cutting line Front finger guard system Foot pedal Rear safety guards Emergency stop button Optional Features 1000 mm back gauge distance Pneumatic sheet support system (rear drop) Pneumatic sheet support system (front and rear drop) 0° – 180° angle gauge Extended front support arms and miter arm 750 mm manual back gauge adjustable from the front with a handwheel CE-compliant light curtain system Technical Specifications Cutting Capacity (450 N/mm²): 4 mm Cutting Length: 2560 mm Cutting Angle: 1.3° Cutting Speed: 31 strokes per minute (hpm) Table Height: 880 mm Machine Dimensions (L x W x H): 3100 x 2250 x 1400 mm Motor Power: 7.5 kW Machine Weight: 3500 kg This machine is manufactured in Turkey by CRONOSSTECH. 🇹🇷

Condition: used, functionality: fully functional, Equipment: type plate available, SHEARING MACHINE – MARIO RIBOLDI 2500 X 3/4 MODEL: CEM 253 Ksdpfx Abjzbck Tj Hodr USED MACHINE INTERNAL CODE: SVR 425

Condition: good (used), You are bidding here on a branded guillotine shear from the well-known German manufacturer Schröder, in good condition. Device features: - Schröder MHSU shear - Cutting capacity: see nameplate, up to 3mm steel; significantly more for aluminum - Working length: just over 2 meters - Manual backgauge approx. 750 mm / a 1000 mm backgauge is equipped with digital display - Side/angle stop - Extension arm up to 2 meters - Reversible blades - Cutting gap lighting - Sheet metal chute - Foot pedal - Weight approx. 1.3 t We also have other machines available, such as the Schechtl MAX 200 – 2.5mm, or Schechtl MA 200 – 2mm and HA series, Schröder AKV 2mm, KSV 1.5mm, and KS 1mm, as well as folding machines and shears by RAS, etc. The current net new price is approximately 25,000 EUR. You will receive an invoice with VAT shown separately; VAT is included in the invoice amount. Shipping can be arranged if requested. Forklift available on site. Free loading as shown in the pictures. Viewing and test run possible by phone appointment. Payment in cash upon collection. If there is anything else I can assist you with, please give me a short call – thank you. Collection should take place within 8 days after the end of the auction. Location: 97249 Eisingen (3 minutes from the motorway) Kedpey R Efaefx Ab Hjdr Item number Schröder MHSU 2m 3mm 260511

Condition: good (used), Year of construction: 2013, sheet width 2520 mm plate thickness 3.2 mm ST cutting thickness max. 5.0 mm AL cutting thickness max. 1.5 mm VA no. of strokes 34 Hub/min cutting angle 1° 20 Grad back stop - adjustable max. 1.000 mm work height max. 800 mm total power requirement 7.5 kW weight of the machine ca. 2100 kg New price approx. 21,000 euros Special price on request Machine was rarely used - good condition (!!) Furnishing: - robust / motorized swing-cut guillotine shears - Shatterproof, torsion-free steel welded construction - compact and clear mechanical design - ESTUN NC digital display - type "E10-S" - electro-motorized back gauge, adjustment via electric. Button - 1x hold-down bar - manual cutting gap adjustment - rear protective device (side protective grilles) - Selector switch for single and continuous stroke - 1x front side stop - 2x front support arms Kdjdpfsy Raitox Ab Hjr - 1x freely movable foot switch - original instruction manual

Condition: used, functionality: fully functional, Year of construction: 1997, machine/vehicle number: 2050x4, control type: CNC control, degree of automation: manual, actuation type: mechanical, working width: 2,050 mm, sheet thickness (max.): 4 mm, sheet thickness steel (max.): 4 mm, Used guillotine shear by Vimercati, model 2050x4, year of manufacture 1997 Ksdpfx Absy Hhqkj Hjdr

Condition: used, functionality: fully functional, Year of construction: 1997, machine/vehicle number: 3000x10, control type: CNC control, degree of automation: manual, actuation type: mechanical, sheet thickness (max.): 10 mm, sheet thickness steel (max.): 10 mm, Used machine guillotine shear manufacturer Vimercati type 3000x10 year of manufacture 1997 Kdsdpfjy Hhkkex Ab Her

Condition: good (used), functionality: fully functional, Year of construction: 1988, Used guillotine shear from Jorg Kdsdpfxeyu H Rdo Ab Hjr Type: 4052 Capacity: 1300 x 4 mm Electric back gauge Year of manufacture: 1988

Condition: good (used), Year of construction: 2007, sheet width 1350 mm plate thickness 4.0 mm thickness at "Niro-steel" 2.0 mm no. of strokes max. 35 Hub/min cutting angle 2.0 Grad table height 945 mm distance between columns 1361 mm Ksdpjyuzcujfx Ab Hsdr Control CIDAN / SIEMENS engine output 5.5 kW weight of the machine ca. 1400 kg range L-W-H 2200 x 2000 x 1550 mm Features: - robust / motorized swing cut guillotine shears - unbreakable and torsion-free welded steel construction - compact and clear machine construction - NC electro-motorized backgauge, with digital display * Target / actual value stop value input * stepless adjustment over the entire travel range - 1x hold-down bar - 1x material side stop - recessed grips in the front support table - Manual cutting gap adjustment from the front - Rear sheet holding device for thin sheets - 1x freely movable foot switch - Operating instructions (PDF)

Condition: like new (used), functionality: fully functional, Year of construction: 2022, control type: PLC-controlled, Equipment: CE marking, documentation/manual, type plate available, Capacity: 4100 x 6 mm. Stroke: 120 mm. Control: DURMA DT-7. Serial No.: 608922260. Dimensions: 5230 x 3600 mm. Height: 2150 mm. Weight: 11,460 kg. Kedpfoyrdfajx Ab Hodr

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 16600 € 318.72 € 1050 mm 6 mm 30 1/min 2.3 ° 750 mm 7,5 kW 800 mm Ksdpfx Abjyg N S Uj Hjdr 530 mm 1355 mm 1720 mm 1630 mm 1230 mm 2000 kg The machines feature a robust, welded steel frame for maximum cutting precision Motorized back gauge 750 mm, ball screw spindles, NC control 2 cutting edges on the upper blade and 4 cutting edges on the lower blade 1000 mm squaring arm with scale, T-slot, and flip stop 2 support arms Mechanical downholder Manual cutting gap adjustment on the front Balls in the table Cutting line illumination Foot pedal Emergency stop button Operating manual with EC declaration of conformity. INCLUDES THE FOLLOWING OPTIONAL EQUIPMENT: Blades suitable for cutting stainless steel Rear light barrier protection

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 19800 € 380.16 € 1550 mm 6 mm 30 1/min 2.3 ° 750 mm 7,5 kW 800 mm 530 mm 1855 mm 2220 mm 1630 mm 1230 mm 2900 kg The machines feature a robust, welded steel frame for maximum cutting precision Motorized back gauge 750 mm, ball screw spindles, NC control 2 cutting edges on the upper blade and 4 cutting edges on the lower blade 1000 mm squaring arm with scale, T-slot, and flip stop 2 support arms Mechanical downholder Kdsdpoyg N Szefx Ab Her Manual cutting gap adjustment on the front Balls in the table Cutting line illumination Foot pedal Emergency stop button Operating manual with EC declaration of conformity. INCLUDES THE FOLLOWING OPTIONAL EQUIPMENT: Blades suitable for cutting stainless steel Rear light barrier protection

Condition: new, Year of construction: 2026, control type: NC control, degree of automation: automatic, actuation type: mechanical, working width: 2,060 mm, cutting angle (min.): 1.3 °, stroke rate (min.): 41 1/min, sheet thickness (max.): 4 mm, sheet thickness steel (max.): 4 mm, back gauge adjustment: motor-driven, back gauge: 750 mm, power: 7.5 kW (10.20 HP), warranty duration: 12 months, Equipment: CE marking, emergency stop, finger protection, foot remote control, Standard Features - ELGO P40T CNC control unit - Robust, welded, monolithic frame construction providing maximum cutting precision - NC-controlled, motorized 750 mm backgauge system - Upper blade with 2 cutting edges, lower blade with 4 cutting edges, made of high-alloy steel - Mechanical hold-down system preventing sheet slippage during cutting - Easily adjustable blade clearance adjustment mechanism - Ball transfer front support table - Front support arms with rule Kdedsyg Id Aepfx Ab Hor - Cutting line illumination system - Finger guard system - Foot pedal - Rear safety guards - Emergency stop button Optional Features - 1,000 mm backgauge system - Rear sheet support and sliding system enabling sheets to be moved and fed to the rear with ease - Drop-down system for cut pieces to fall to the front - Front adjustable angle square, 0–180° - Front support arms in custom lengths - Manual 750 mm backgauge with front adjustable handwheel - Rear safety light barrier Technical Specifications Machine Type: A04/2060 Cutting Capacity (450 N/mm²): 4 mm Cutting Length (A): 2,060 mm Cutting Angle: 1.3° Cutting Speed: 41 cuts/min Table Depth (C): 800 mm Machine Dimensions (L × W × H): 2,600 × 2,250 × 1,400 mm Motor Power: 7.5 kW Weight: 3,000 kg

Condition: new, Year of construction: 2026, control type: NC control, degree of automation: automatic, actuation type: mechanical, working width: 3,060 mm, cutting angle (min.): 1.3 °, stroke rate (min.): 41 1/min, sheet thickness (max.): 4 mm, sheet thickness steel (max.): 4 mm, back gauge adjustment: motor-driven, back gauge: 750 mm, power: 7.5 kW (10.20 HP), warranty duration: 12 months, Equipment: CE marking, documentation/manual, emergency stop, finger protection, foot remote control, Standard Features ELGO P40T CNC control unit Robust, welded and monolithic frame structure providing maximum cutting precision NC-controlled, motorized 750 mm backgauge system Upper blade: double-edged; lower blade: four-edged, manufactured from high-alloy steel Mechanical hold-down system to prevent sheet slippage during cutting Easily adjustable blade clearance system Ball transfer front support table Front support arms with ruler Cutting line illumination system Finger protection system Foot pedal Rear protective cages Emergency stop button Optional Features 1,000 mm backgauge system Rear sheet support and sheet sliding system for easy positioning and transfer of sheets to the rear System for dropping cut pieces to the front Adjustable front angle gauge 0–180° Front support arms available in custom lengths upon request Manual 750 mm backgauge with front-adjustable handwheel system Rear safety light barrier Technical Specifications Machine Type: A04/3060 Cutting Capacity (450 N/mm²): 4 mm Kdjdjyg Ic Eopfx Ab Hor Cutting Length (A): 3,060 mm Cutting Angle: 1.3° Cutting Speed: 41 strokes per minute Table Length (C): 800 mm Machine Dimensions (L × W × H): 3,600 × 2,250 × 1,400 mm Motor Power: 7.5 kW Weight: 4,000 kg