TRAUB TNL 12 / year 2017, with FMB_IntNo. 231667

TRAUB TNL 12

Condition: used, Year of construction: 2005, machine/vehicle number: IntNr231668, A CNC vertical turning centre, TRAUB TNL 12, manufactured in 2005, equipped with a TRAUB TX8i-s control system and extensive peripherals, is for sale. This machine originates from the medical technology sector and is in exceptionally well-maintained condition, both visually and technically. General Technical Data Manufacturer: INDEX-Werke GmbH & Co. KG (TRAUB) Model: TNL 12 Year of Manufacture: 2005 Control System: TRAUB SYSTEM TX8i-s CNC Axes: 11 axes Max. Bar Diameter: 13 mm Max. Turning Length: 130 mm Operating Hours (Recorded) Control ON: 38,120 h Production Time: 22,345 h Spindle Run Time: 15,543 h Main Spindle Max. Speed: 12,000 rpm Drive Power: 2.5 / 4.0 kW (100% / 25% duty cycle) C-Axis Resolution: 0.001° Counter Spindle Max. Speed: 12,000 rpm Drive Power: 2.5 / 4.0 kW (100% / 25% duty cycle) C-Axis Resolution: 0.001° Tool Carrier / Machining Tool Turret: 2 turrets Tool Stations: 6 stations each Powered Tools: on all turret stations Tool Drive (Turret): Up to 8,000 rpm Drive Power (Tool Drive): 1.5 kW (25% duty cycle) Front Machining Unit: 4 tool stations Rear Machining Unit: 4 tool stations Simultaneous Machining: Depends on the number of tool carriers Equipment and Peripherals Bar Feeder Magazine: FMB minimag 20 CO₂ Extinguishing System: Kraft & Bauer FB 703 Coolant Treatment: RESY compact belt filter system Oil Mist Extraction: NOVA, mounted on the machine Electrical Connection Values Hjdpfx Aio Ahfavjrjw Voltage: 400 V / 50 Hz / 3-phase Connected Load: 16 kW / 19 kVA Rated Current: 27 A The machine can be inspected by appointment. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Year of construction: 2011, condition: ready for operation (used), A 2-tank spray/flood cleaning machine Mafac is available. Basket dimensions X/Y/Z: 660mm/480mm/338mm, max. batch weight: 100kg, spray pressure pump power: 7.5kW, spray cleaning directions: 5, basket batch flooding: 50%, filling volume: 830l, heating power: 30kW. Machine dimensions X/Y/Z: approx. 2200mm/1500mm/2050mm, weight: approx. 1400kg, control: Siemens Simatic S7-1500. Documentation available. On-site inspection is possible. Hsdpfxox I Rrgj Airjw

Condition: good (used), Year of construction: 2002, TRAUB TNL 12/7 CNC sliding headstock automatic lathe TECHNICAL DATA Bar capacity: 12 mm Main headstock strokes: 130 / 80 mm Spindle power: 4 kW Speed, main spindle: 12`000 rpm Upper turret: 6 positions Lower turret: 6 positions Number of driven tools, turret: 6 Max diameter, counter spindle: 12 mm Speed, counter spindle: 12`000 rpm Dimensions: 2850 x 1100 x 1480 mm SCOPE OF OFFER Hsdpfx Ast E Dbysirew U.A: (list not exhaustive): Traub TNL 12/7 CNC lathe Meyrat high-frequency spindles, 2 pieces Tool holders (driven and non-driven) FMB Minimag 3200 C bar loader Hydraulic unit High pressure pump Chip conveyor Exact scope of supply according to photo gallery No responsibility is taken for the correctness, completeness and up-to-dateness of the information.

Condition: used, Swiss-type cnc lathe TRAUB TNL 12K Hedpfx Aiszxuc Ujrjw

Condition: new, Year of construction: 2026, Standard equipment: torsion-resistant, robust cast iron saw frame powered chip removal brush powerful industrial worm gear motor automatic shutdown after cutting is complete mechanical saw blade tension with electric blade breakage monitoring quick-release vise, adjustable hydraulic saw frame lowering with rapid feed function (infinitely adjustable) electric coolant pump precision carbide saw blade guides, ground (adjustable) large-diameter round support table, rotating with miter cuts, miter angle indicator (scale) facing the operator direct switchover from manual operation to lowering operation easily removable chip collection tray material stop 500 mm with scale including saw blade with combination tooth pattern 4/6. Technical data: Motor, three-phase, 400 V, pole-switching 1.1/1.5 kW Saw blade dimensions 2720 x 27 x 0.9 mm Flywheel diameter 300 mm Cutting speed 40/80 m/min Vise clamping range 275 mm Working height 978 mm Weight 370 kg Machine dimensions (W x D x H) 1150 x 1588 x 1477 mm Sawing range: see data sheet Further accessories available upon request. DELIVERY: FREE DELIVERY (within Germany) NOT THE RIGHT MACHINE? Hodpfxsfg Eq Re Airow WE ARE A FLOTT SUPPORT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: used, Swiss-type cnc lathe TRAUB TNL 12/7 Hedpfezxii Nsx Airew

Condition: used, Swiss-type cnc lathe TRAUB TNL 12/7 Hedpfszxii Asx Airsw

Year of construction: 2006, condition: used, Control voltage: 24V DC, rated current: 85A, connected load: 39kVA, rated power: 49kW, control-on operating hours: 32,779h, automatic operation 1: 5,040h, automatic operation 2 operating hours: 1,844h, production time: 33,731h, length: 3231mm, width: 2076mm, height: 1917mm, weight: 4.8t, with documentation, chip conveyor and FMB turbo 8-80 bar feeder. An on-site inspection is possible. Hjdpfx Aiszuzzvjrew

Condition: used, Swiss-type cnc lathe TRAUB TNL 12K Hodpozxiivjfx Airjw

Condition: used, Swiss-type cnc lathe TRAUB TNL 12K Hodpfozxiipjx Airsw

Condition: used, Year of construction: 2016, operating hours: 60,000 h, functionality: fully functional, Heller FMS with 2 x H2000 Machine make / type: HELLER H2000 Operating hours: 59,654 Year of manufacture: 2016 Control system: Siemens 840D SL Spindle: PC63 10,000 rpm, 38 kW, 242 Nm Tool clamping system: SK40 Magazine / locations: Chain magazine / 160 locations Convenient operator terminal, setup during machining Rotary table: 360,000° x 0.001° Coolant system: Knoll KF 400/50 bar Working area XYZ (mm): 630 / 630 / 630 Pallet size (mm): 500 x 400 Workpiece clamping: Mechanical Additional options, special features: Drill breakage detection (SBBK); FMS interface, infrared receiver probe (Renishaw), extraction interface; coolant cooler Machine make / type: HELLER H2000 Operating hours: 60,546 Year of manufacture: 2016 Control system: Siemens 840D SL Spindle: SC63 16,000 rpm, 40 kW, 96 Nm Tool clamping system: SK40 Magazine / locations: Chain magazine / 240 locations Convenient operator terminal, setup during machining Rotary table: 360,000° x 0.001° Coolant system: Knoll KF 400/50 bar Working area XYZ (mm): 630 / 630 / 630 Pallet size (mm): 500 x 400 Workpiece clamping: Mechanical Additional options, special features: Drill breakage detection (SBBK); FMS interface, infrared receiver probe (Renishaw), extraction interface; coolant cooler Machine make/type FASTEMS FPC750 with expansion container Operating hours: No counter installed Year of manufacture: 2016 Control system: FASTEMS Memory locations: 24 memory locations, 2 setup stations Workpiece clamping: Mechanical Additional options, special features: 20 pallets included Hedpfx Aijwbt Rrjrsw Further information and technical specifications upon request.

Condition: used, Swiss-type cnc lathe TRAUB TNL 12K Hjdozxiiiopfx Airsw

Condition: used, Swiss-type cnc lathe TRAUB TNL 12K Hedpfxezxiicj Airsw

Condition: good (used), Year of construction: 1999, operating hours: 1,10,000 h, functionality: fully functional, spindle bore: 42 mm, Description follows Hodpfx Ajx A Ha Hsirew

Condition: used, Swiss-type cnc lathe TRAUB TNL 12K Hedpfx Ajzxih Sjirsw