Carlo Pinna Macchine Srl

Condition: good (used), Year of construction: 1987, control type: CNC control, bending force (max.): 1,250 t, throat depth: 770 mm, distance between stands: 10,160 mm, Press force 1250 t Bending length 15000 mm Upright spacing 10160 mm Control system CNC 10 graphics Throat depth 770 mm Table length 15000 mm Machine weight approx. 230 t Required space approx. 17000 x 5400 x 5900 mm Additional information: - Press force: 1,250 t - Bending length: 15,000 mm - Control: CNC 10 graphics Csdox A Erzspfx Addork - Number of controlled axes: at least 10 - Upright spacing: 10,160 mm - Throat depth: 770 mm - Table length: 15,000 mm - Dimensions: 17,000 mm x 5,400 mm x 5,900 mm - Weight: approx. 170 t Equipment: - Crowning device - CNC 10 graphic control - Hydraulic upper tool clamping - Multi-operator functionality - Increased speeds - Automatic, height-adjustable rear sheet gauge - Draw cushion device - Horn length on each side: 2,200 mm

Condition: good (used), functionality: fully functional, Year of construction: 1998, operating hours: 31,792 h, Hydraulic Press Brake Manufacturer: TRUMPF Model: TrumaBend V320 Year of Manufacture: 1998 Technical Details Manufacturer: TRUMPF Model: TrumaBend V320 Year: 1998 Operating hours: 31,792 h (read-off value) Pressing force: 320 t Bending length: 4,080 mm Distance between uprights: 3,680 mm Throat depth: 410 mm Approach speed: 150 mm/sec Return speed: 135 mm/sec Bending speed: 10 mm/sec Stroke: 365 mm Installation height: 535 mm Space requirement: approx. 4.65 x 2.31 x 3.1 m Weight: 24.5 t Equipment: • 2D graphic control Delem DA • Pneumatic die shifting Crjdpfx Adsx Ar T Eedjk • 2 movable support arms • Hydraulic tool clamping, top and bottom • CNC-controlled crowning • Controlled axes: Y1, Y2, X1, X2, R1, R2, Z1, Z2 • Upper tool OW 202/S, 28°/R1, H 220 mm, L = 4,000 mm, segmented • Lower tool EV006-W20, 30°/R2, H 100 mm, L = 4,000 mm, segmented All information subject to verification. A demonstration is possible at any time in our showroom.

Condition: used, Year of construction: 2004, weight of the machine ca. 5500 kg Cedpfx Asxzk R Heddsrk

Condition: good (used), functionality: fully functional, Year of construction: 2000, The machine is in good technical condition, after previous agreement the possibility of testing. Crodpfx Adjxyvz Iodok

Condition: good (used), functionality: fully functional, Year of construction: 2005, control type: CNC control, installation height: 615 mm, pressing force: 320 t, Bending length [mm] 4220.00 Press force [tons] 320 Control unit TRUMPF TASC 6000 Hydraulic hours [h] 53,030 Standard equipment: Credpfjxxbr Ajx Addjk - Rigid machine frame, all-steel welded construction - Press beam with high bending strength - Spherical mounting of the press beam with beam tilt capability - Electro-hydraulic top drive with 4-cylinder technology - Proportional valve technology and switchable double pump - Modern block hydraulics with control valves mounted on the cylinder - Electronic pressure scale - Measuring system with centrally mounted glass scales and temperature compensation - Manual, integrated wedge crowning in the bed - "New Standard Clamping" manual, hardened, self-centring upper tool clamping system for vertical tool change - Lower tool clamping with hydraulic clamping, hardened - Programmable lower tool displacement (pneumatic, 2 positions) - 2-axis backgauge system with rack-and-pinion drive for X and R axes, 2 stop fingers, safely adjustable from the front - Machine control: TASC 6000 - Operator console with LCD keypad, emergency up, down and E-stop foot switch - Safety features: integrated side doors and automatic rear roller cover - Control cabinet cooling - Oil cooler - Modern machine design + 5-axis backgauge system + Hydraulic upper tool clamping + CNC crowning + BendGuard + 2 support consoles + Park position + 1 bending aid + Additional foot switch

Condition: good (used), functionality: fully functional, Year of construction: 1990, machine/vehicle number: 05020/T00559, overall weight: 3,500 kg, total length: 2,500 mm, total width: 1,600 mm, total height: 2,200 mm, input voltage: 380 V, input frequency: 50 Hz, AMADA ITS press brake - Rated current: 12.5 A - Max. press force: 500 kN - Bending length: 2000 mm - Includes a set of suitable press brake tools Attention: The item must be collected bindingly between 19 and 23.01.2026 at a date to be agreed upon. Codpfx Ajxw T Tcsddsrk FCA D-76571 Gaggenau – loaded onto truck

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, Pressure: 80 t Bending length: 2500 mm Distance between uprights: 2050 mm Csdpfxsxwv Aae Addsrk Stroke: 300 mm Total power requirement: 20 kW Machine weight approx.: 7,000 kg Space requirement approx.: 3500x1800x3100 mm

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1999, controller model: Amada Operator, bending force (max.): 320 t, stroke length: 350 mm, working length: 4,100 mm, TECHNICAL DETAILS Press force: 320 t Bending length: 4,100 mm Stroke: 350 mm MACHINE DETAILS Control: Amada Operator Total power requirement: 32 kW Dimensions & Weight Space requirements: approx. 4,300 x 2,600 x 3,400 mm Machine weight: approx. 23,500 kg EQUIPMENT Cjdpfx Ajxwnxtsdderk Amada quick-change tool holder Amada lower tool holder Controlled axes: y1, y2, x, r, z1, z2 Rear safety doors Two-hand foot operation

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1995, controller model: Cybelec ModEva 19 T, bending force (max.): 300 t, distance between stands: 3,550 mm, oil tank capacity: 400 l, working length: 4,050 mm, The machine control was renewed in 2022! TECHNICAL DETAILS Press force: 300 t Bending length: 4,050 mm Distance between uprights: 3,550 mm Oil capacity: 400 l MACHINE DETAILS Control system: Cybelec ModEva 19 T Total power requirement: 22 kW Machine weight: approx. 20,000 kg EQUIPMENT 2 bending aids Matrix displacement Pneumatic tool clamping, top and bottom Crowning Controlled axes: y1, y2, x, R, z1, z2 Two-hand foot control 2 parking stations for bending aid Cjdoxwnqcepfx Addsrk

Condition: used, Year of construction: 2008, machine/vehicle number: HL, Year of manufacture: 2008 Machine weight (kg): 145,000 Voltage: 400 Frequency (Hz): 50 Electric power (kW): 75 Csdpfexwbd Njx Addork Absorbed current (A): 160 Stroke (mm): 8

Condition: refurbished (used), Bystronic PR10 320 ton x 7200 mm . 5 Axis Back Gauge X. R.Z1. Z2.X1. Hydraulic Crowning. 100 mm Extended Daylight &Stroke. Akas Laser Guarding. Cybelec DNC 1200 Colour Graphic Control. Tooling to be Agreed Crjdpfx Ajxqr R Tjddek

Condition: used, functionality: fully functional, control type: NC control, Press Brake CMLL Model DUO 40.50: 4000X500 ton Condition: Used Machine: Synchro Cjdpfx Ajxcac Ujddork Bending length: 4050 mm Max force: 500 ton Ram stroke: 350 mm Distance between uprights: 3100 mm AXES: 3 Y1, Y2, X Crowning table: manual Pit-mounted machine: Yes Dimensions (LxWxH): 4300x2400x3650 mm Lower die holder plate: 4300x1600 mm, 5.5 ton Upper knife holder plate: 6.5 ton Machine body: 21 ton

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2009, installation height: 615 mm, pressing force: 320 t, Bending length [mm]: 4420 Press force [tons]: 320 Control system: TRUMPF TASC 6000 Operating hours [h]: 85,406 Hydraulic system on [h]: 30,735 Standard equipment: - Sturdy machine frame as a welded all-steel construction Csdpfx Adjxb Tyqjdjrk - Press beam with high flexural rigidity - Spherical mounting of the press beam with inclined press beam positioning - Electrohydraulic top-drive with 4-cylinder technology - Proportional valve technology and switchable double pump - Modern block hydraulics with control valves mounted directly on the cylinder - Electronic pressure scale - Measuring system with centrally mounted glass scales and temperature compensation - Manually integrated wedge crowning system in the table - Upper tool clamping system "New Standard Clamping", manual, hardened, self-centering, for vertical tool change - Lower tool clamping with hydraulic clamping, hardened - Programmable lower tool displacement (pneumatic, 2 positions) - Backgauge system, 2-axis, with rack and pinion drive for X and R axes; 2 stop fingers adjustable safely from the front - Machine control: TASC 6000 - Operator console with LCD keypad, footswitch for emergency stop, up, and emergency-off - Safety equipment: integrated side doors and automatic rear roll-up cover - Control cabinet cooling (air-to-air heat exchanger) - Oil cooler - Network capable - Modern machine design - 4-axis backgauge system - Hydraulic upper tool clamping - CNC crowning - Preparation for ACB Automation BendMaster (150) - Floor track 8,000 mm - Two-sided safety fence

Condition: good (used), Year of construction: 1991, pressure 300 t chamfer lenght 4100 mm distance between columns 3710 mm stroke - stepless adjustable 250 mm column arm 330 mm dayligth 500 mm table height 940 mm table width 250 mm working feed 7.0 mm/sec return speed 90.0 mm/sec Control konv. operating pressure max. 305 bar voltage 380 V total power requirement 22.5 kW weight 25200 kg range L-W-H 4320 x 2100 x 3500 mm well-maintained condition (!!) - in checked condition - machine video - ?v=rPOBwTfVReo Equipment: - simple, conventional hydraulic press brake - swiveling control panel, left front - electro-motoric back stop (X axis) * adjustment via front control panel (button) * with analog position display * fine adjustment via handwheel, front - with 3x stop fingers, manually adjustable - electro-motoric depth adjustment (Y1+Y2 axis) * with analog position display - 1x split set of 85° deer foot upper tool - 1x MultiV - universal die block, with several V-openings - 2x front, stable support arms - 1x freely movable double foot switch - 1x freely movable 2-hand control - side safety device (swivelling doors) - rear safety device (sliding door) - original operating instructions Crsdexab I Topfx Addok

Condition: new, pressure 320 t chamfer lenght 3100 mm distance between columns 2600 mm column arm 410 mm ram stroke speed 140 mm/sec work speed 10.5 mm/sec return speed 150 mm/sec work stroke 375 mm dayligth 650 mm table height 900 mm table width 240 mm oil volume 400 ltr. voltage 400 Volt total power requirement 30.0 kW weight 17082 kg Dimensions (HxWxD) 4550 x 2450 x 3200 mm Codpfx Adoxabdzsdsrk ----- HIGH-SPEED hydraulic press brake with increased installation height increased cylinder stroke enlarged projection ----- Furnishing: - DELEM CNC control model DA 66T - swiveling touchscreen control unit - 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning - electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm - on ball screws - controlled electr. Stop fingers Z1 + Z2 - split upper deer foot tool Roleri 135.85.R08, "System A" - with additional crowning of the upper wedge - Universal die block - LEUZE light barrier behind d. machine - BOSCH / HOERBIGER hydr. Components - SIEMENS - electrical system - FIESSLER AKAS laser protection device in front of the machine (including FPSC) - 2 front support arms with SLIDING system (plain bearings) - Double foot operation - CE mark / declaration of conformity - User manual: machine and control in German - Safety manual: press brakes Special equipment including: - electrical central lubrication

Condition: new, pressure 320 t chamfer lenght 4100 mm distance between columns 3600 mm column arm 410 mm ram stroke speed 140 mm/sec work speed 10.5 mm/sec return speed 150 mm/sec work stroke 375 mm dayligth 650 mm table height 900 mm table width 220 mm oil volume 400 ltr. voltage 400 Volt total power requirement 30.0 kW weight 22064 kg Dimensions (HxWxD) 5350 x 2450 x 3150 mm ----- HIGH-SPEED hydraulic press brake with increased installation height increased cylinder stroke enlarged projection ----- Furnishing: - DELEM CNC control model DA 66T Crjdjxaba Njpfx Addjk - swiveling touchscreen control unit - 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning - electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm - on ball screws - controlled electr. Stop fingers Z1 + Z2 - split upper deer foot tool Roleri 135.85.R08, "System A" - with additional crowning of the upper wedge - Universal die block - LEUZE light barrier behind d. machine - BOSCH / HOERBIGER hydr. Components - SIEMENS - electrical system - FIESSLER AKAS laser protection device in front of the machine (including FPSC) - 2 front support arms with SLIDING system (plain bearings) - Double foot operation - CE mark / declaration of conformity - User manual: machine and control in German - Safety manual: press brakes Special equipment including: - electrical central lubrication

Condition: new, pressure 220 t chamfer lenght 3100 mm Credpfx Aoxaag Ijddok distance between columns 2600 mm column arm 410 mm ram stroke speed 180 mm/sec work speed 10.0 mm/sec return speed 185 mm/sec work stroke 275 mm dayligth 550 mm table height 930 mm table width 200 mm oil volume 300 ltr. voltage 400 Volt total power requirement 18.5 kW weight 11286 kg Dimensions (HxWxD) 4550 x 2250 x 2850 mm ----- HIGH-SPEED hydraulic press brake with increased installation height increased cylinder stroke enlarged projection ----- Furnishing: - DELEM CNC control model DA 66T - swiveling touchscreen control unit - 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning - electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm - on ball screws - controlled electr. Stop fingers Z1 + Z2 - split upper deer foot tool Roleri 135.85.R08, "System A" - with additional crowning of the upper wedge - Universal die block - LEUZE light barrier behind d. machine - BOSCH / HOERBIGER hydr. Components - SIEMENS - electrical system - FIESSLER AKAS laser protection device in front of the machine (including FPSC) - 2 front support arms with SLIDING system (plain bearings) - Double foot operation - CE mark / declaration of conformity - User manual: machine and control in German - Safety manual: press brakes

Condition: new, pressure 400 t chamfer lenght 4100 mm distance between columns 3550 mm column arm 510 mm Crjdpfxjxaadte Addok ram stroke speed 110 mm/sec work speed 8.4 mm/sec return speed 130 mm/sec work stroke 375 mm dayligth 650 mm table height 1000 mm table width 240 mm back stop - adjustable max. 800 mm oil volume 400 ltr. voltage 400 Volt total power requirement 30.0 kW weight 26409 kg range L-W-H 5450 x 2650 x 3470 mm ----- HIGH-SPEED hydraulic press brake with increased installation height increased cylinder stroke enlarged projection ----- Furnishing: - DELEM CNC control model DA 66T - swiveling touchscreen control unit - 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning - electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm - on ball screws - controlled electr. Stop fingers Z1 + Z2 - split upper deer foot tool Roleri 135.85.R08, "System A" - with additional crowning of the upper wedge - Universal die block - LEUZE light barrier behind d. machine - BOSCH / HOERBIGER hydr. Components - SIEMENS - electrical system - FIESSLER AKAS laser protection device in front of the machine (including FPSC) - 2 front support arms with SLIDING system (plain bearings) - Double foot operation - CE mark / declaration of conformity - User manual: machine and control in German - Safety manual: press brakes Special equipment including: - electrical central lubrication

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, Working length 5100 mm Pressing force 400 t Max. stroke 365 mm 34 kW Csdew Tqphjpfx Addsrk 38 tons weight

Condition: reconditioned (used), functionality: fully functional, Year of construction: 1990, controller model: Cybelec ModEva 12S, bending force (max.): 320 t, working width: 8,050 mm, distance between stands: 7,550 mm, Conversion 2009: - motorized die shift 111-112: mechanically and electrically NEW - Backgauge X-R: mechanical and electrical NEW - Automatic punch clamping: mechanical and electrical NEW - CNC control: mechanical and electrical NEW - Safety valves NEW - Measuring rulers NEW - Control valves Y1 - Y2 NEW - Main hydraulic pump NEW Codpfx Adsw Sttaodjrk TECHNICAL DETAILS Pressure: 320 t folding length: 8050 mm Stand width: 7550 mm Control system: Cybelec ModEva 12S EQUIPMENT - CNC-controlled backgauge x-direction and R-direction - Motorized die displacement M1 and M2 - 2 x pneumatic bending aids at the front - Pneumatic sheet holding unit - Automatic tool clamping at the top - motorized crowning

Condition: used, Year of construction: 2021, Bending length 4300 mm Max. pressure 320 ton Distance between uprights 3750 mm Gap in frames 400 mm Daylight 840 mm Max. travel of back gauge 1050 mm X-axis movement 600 mm R-axis movement 250 mm Z-axis movement 1500 mm Control: ByVision Bysoft 7, Bending Version 3.15.1 - w/22” touch screen Equipped with: Hydraulic dynamic crowning Automatic tool protection Measuring of sheet thickness Hydraulic clamping of upper & lower tools (Wila system) Eco (XPT Pro T13) XPT Pro T 13 table, w/automatic height adjustment Optic bending guiding system Primary dynamic sheet support Secondary dynamic sheet support 5-axis back gauge w/X. X1, R, Z1 & Z2 Easy fix bending line Fast bend+ G2 security equipment Software: BySort 7 Csdpfx Aow Nnvdsddsrk Only been running for 1895 hours New price: 373.000 euro Weight 27,3 ton - L/W/H 5260/2000/3750 mm

Condition: refurbished (used), functionality: fully functional, Year of construction: 1996, machine/vehicle number: 02/510/004, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Cybelec, controller model: Visitouch 19" 2D, bending force (max.): 225 t, working width: 4,100 mm, stroke length: 265 mm, number of axes: 4, table height: 800 mm, travel distance X-axis: 500 mm, back gauge adjustment: CNC-controlled, back gauge speed R-axis: 100 mm/s, overall weight: 22,000 kg, total length: 2,670 mm, total width: 4,100 mm, total height: 2,800 mm, power: 18.5 kW (25.15 HP), input voltage: 400 V, input current: 63 A, input frequency: 60 Hz, Equipment: CE marking, centralized greasing system, documentation/manual, emergency stop, foot remote control, Pressbrake fully updated with a new numerical control 2D from Cybelec Switzerland Cjdpfew I A Ncox Adderk

Condition: excellent (used), Brand: MVD Model: D320-3700 Tonnage: 320 Tons Working width: 3700 mm Year of manufacture: 2021 Stroke: 410 mm Installation height: 615 mm Throat depth: 510 mm Controlled axes: Y1, Y2 and X+R+Z1+Z2+X5 axis Distance between uprights: 3200 mm Approach speed Y-axis: 210 mm/sec Control: Delem DA69T Safety: DSP Laser Safe Upper tool clamping: Wila NSCL hydraulic clamping Lower tool clamping: Wila NSCR hydraulic clamping and crowning Codow Hx S Sepfx Addjrk

Condition: good (used), Year of construction: 2006, Gebruikte 4 meter CNC-kantbank van Bystronic Csdpfxswz Iwae Addjrk Type: PR 200 4100 Bouwjaar: 2006 Capaciteit: 4100 x 200 ton Cybelec CNC-besturing Y1, Y2, X, R, Z1 en Z2 Hydraulische boven- en onderklemming Hydraulische CNC-bombering

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, control type: CNC control, controller manufacturer: Cybelec, controller model: Cybtouch 12, bending force (max.): 300 t, working width: 6,000 mm, number of axes: 4, Equipment: CE marking, emergency stop, european tool clamping system, safety light barrier, Used 6metre x 300ton Adira Cnc Press Brake - Hydraulic Pressbrake 300 Ton 6000mm bending Length Back gauge: X and Z Axis Upgraded touch screen control Cyblec CybTouch 12 Control System Credpfx Aewu Ua Ujddek Year of Manufacture - 2005 Good service history including rebuilt ram cylinders, rebuilt crowning and upgraded control system Euro tool clamping