PaGaPlast

Condition: excellent (used), Year of construction: 2018, Injection Moulding Machine KRAUSS MAFFEI KM 420-2000 CX Basic Data Manufacturer: Krauss Maffei Model: KM 420-2000 CX Machine Number: 61030600 Year of Manufacture: 2018 Control System: MC6 Control Panel: Colour monitor integrated with operator console The machine is equipped with a fully hydraulic clamping system and the advanced MC6 control system. Plasticizing Unit Complete plasticizing unit designed for thermoplastics processing. High-performance screw: HPS-UN Screw diameter: 60 mm Non-return valve: Yes Nozzle type: Open Nozzle radius: 15 mm Nozzle orifice: 6 mm Injection unit: SP 2000 Clamping Unit Clamping force: 4200 kN Mould opening force: 250 kN Platen size (H x V): 1270 × 1230 mm Tie bar clearance (H x V): 800 × 800 mm Max mould opening stroke: 1020 mm Min mould height: 580 mm Max platen opening stroke: 1600 mm Ejector stroke: 250 mm Ejector force (forward/backward): 95 / 49 kN Injection Unit Screw diameter: 60 mm L/D ratio: 23.3 Injection pressure: 2420 bar Injection volume: 792 cm³ Shot weight (PS): 720 g Injection speed: 130 mm/s Injection flow rate: 368 cm³/s Screw rotation speed: 285 rpm Plasticizing rate: 72.2 g/s Nozzle contact force: 82 kN Electrical & Hydraulic Equipment Nominal pump motor power: 75 kW Installed heater capacity: 29 kW Number of cylinder heating zones: 6 (+1 extended nozzle) Dry cycle time (EUROMAP 6): 3.0 s / 560 mm Required hydraulic oil volume: 1000 l Gedpfx Abjyugkwehjbi Dimensions & Weight Net weight (incl. control cabinet): 21.5 t Machine dimensions (L × W × H): 6.90 × 2.49 × 2.38 m Max mould weight: 6700 kg Optional Energy Saving System ESS (Energy Saving Systems) The machine can be equipped with an ESS servo drive system, which increases the energy efficiency of hydraulic injection moulding machines. The system controls the operation of the hydraulic pump motor via a frequency converter, adjusting the motor speed to the actual demand during the production cycle. Key Benefits: - Reduction of electricity consumption by up to 30% - Servo drive technology for the hydraulic pump - World-class, proven industrial technology - Reduction of energy losses during idle runs - Lower heating of hydraulic system - Extended life of hydraulic components - Can be retrofitted to existing hydraulic injection moulding machines

Condition: excellent (used), Year of construction: 2003, KRAUSS MAFFEI Injection Moulding Machine KM 4000-24500 MC with optional ESS Energy Saving System Basic Data Manufacturer: KraussMaffei Model: KM 4000-24500 MC Year of manufacture: 2003 Control system: MC4 Software languages: German, English, Swedish Clamping Unit Clamping force: 40,000 kN Mould opening force: 2,525 kN Platen dimensions: 3,315 × 2,920 mm Tie bar clearance: 2,240 × 1,800 mm Mould opening stroke: 3,100 mm Minimum mould height: 1,100 mm Gbedpfx Absyuf N Eehji Maximum mould height: 2,000 mm Maximum daylight: 4,200 mm Ejector stroke: 350 mm Ejector force: 772 / 368 kN Injection Unit (HPS-AT) Screw diameter: 150 mm L/D ratio: 23 Max. injection pressure: 1,843 bar Shot volume: 13,254 cm³ Shot weight (PS): 12,061 g Injection rate: 1,431 cm³/s Plasticising rate: 266 g/s Electro-hydraulic System Hydraulic pump motor power: 200 kW Heater power: 159 kW Number of barrel heating zones: 7 Dry cycle time (EUROMAP 6): 270 cycles/h Hydraulic oil tank capacity: 2,700 l Machine Dimensions and Weight Machine dimensions (L × W × H): 17.3 × 4.9 × 3.74 m Machine weight: 247 t Maximum mould weight: 90,000 kg Optional ESS Energy Saving System (Energy Saving Systems) The machine can be equipped with a state-of-the-art ESS servo drive system, which significantly improves the energy efficiency of hydraulic plastic injection moulding machines. The system controls the operation of the hydraulic pump motor via a frequency converter, adjusting the motor speed to match the machine’s actual demand during the production cycle. As a result, electricity is consumed only when it is actually needed. Key Benefits of the ESS System - Reduction of electrical energy consumption by up to 30% - Hydraulic pump servo drive technology - World-class, proven technology used in the plastics processing industry - Reduced energy consumption during idle operation - Lower hydraulic system heat generation - Extended service life of the motor and hydraulic components - Can be retrofitted to existing hydraulic injection moulding machines without modifications to the machine’s structure The ESS system offers a modern solution to considerably reduce the operating costs of the injection moulding machine while maintaining full production capacity.

Condition: ready for operation (used), Year of construction: 1999, clamping force: 1,100 kN, screw diameter: 150 mm, total width: 1,400 mm, total height: 1,150 mm, overall weight: 77,000 kg, Hydraulic injection moulding machine manufactured in 1999. This Engel ES 16050/1100 DUO features a clamping force of 1100 T and a screw diameter of 150 mm. It has an opening stroke of 1800 mm and a total weight of 77,000 kg. If you are looking to get high-quality injection moulding capabilities, consider the Engel ES 16050/1100 DUO machine we have for sale. Contact us for further details. • Working hours: 86,200 h • Column diameter: 230 mm • Displacement: 10,955 cm³ • Injection pressure: 1330 bar Godpfx Abeyuc Urjhjbi • Ejection force: 215 N • Opening stroke: 1800 mm • Heating capacity: 113 kW (153.64 hp)

Condition: excellent (used), Year of construction: 2015, ARBURG A 1500 T 2000-400 Drehtisch (29.844 h) (S&P 3792) Gjdpfxjyucccj Abhjbi Manufacture year: 2015 Operating hours: 29,844 Stunden Screw: 40 mm Injection pressure: 2000 bar Stroke volume: 201 cm³ Clamping Force: 200 t Tie bar distance: 1500 mm Mould installation height min.: 400 mm Plate distance max.: 700 mm Dimensions: 4700 x 2100 x 2600 mm Eeight: 11500 kg Connected load: 22 kW 1500mm Table-diameter, 2-station (180°) turntable, 2 x Corepuller, Airvalve, Interface Colorizing, Hotrunner, price when new approx. 250.000,- € etc... Price: on request contact: Mr. Ralf Schulz

Condition: ready for operation (used), Year of construction: 2002, operating hours: 14,500 h, functionality: fully functional, clamping force: 2,500 kN, screw diameter: 60 mm, displacement volume: 735 cm³, injection pressure: 1,481 bar, injection weight: 662 g, mold height (min.): 250 mm, ejector stroke: 250 mm, plate length: 650 mm, plate width: 1,050 mm, installation height: 850 mm, Machine in operational condition. Includes handling robot from ENGEL. Godpfx Aboyuayrohjbi

Condition: good (used), Year of construction: 2008, clamping force: 1,200 kN, Injection moulding machine KraussMaffei KM 120-380 EX with automation, handling device and conveyor belt Gjdpoytpcmsfx Abhobi

Condition: good (used), Year of construction: 2004, Machine located in Germany Gbjdeytpbvepfx Abhoi

Condition: good (used), Year of construction: 2001, The machine is located in Germany. Gbjdpfxsytpa Se Abhsi

Condition: good (used), Year of construction: 1997, Injection moulding machine – the machine is located in Germany Gbedpfxeytn U Ue Abhsi

Condition: good (used), clamping force: 3,000 kN, Available quantity: 4 units Manufacturer: KraussMaffei Model: KM 300-1400 C2 Machine type: Hydraulic injection moulding machine Year of manufacture: 1999 Clamping force: 3000 kN International designation: KM 1400 C2 / 300 Machine weight: 12,500 kg CE marking: available Operating hours Machine 1: 25,745 h Gedpfsytnnzsx Abhsbi Pump operating hours Machine 1: 28,070 h Operating hours Machine 2: 13,908 h Pump operating hours Machine 2: 16,204 h Further information available upon request.

Condition: good (used), Year of construction: 1999, clamping force: 2,000 kN, Manufacturer: KraussMaffei Kunststofftechnik München Model: KM 200-700 C2 Machine No.: 174406 International size designation: 700 C2 / 200 Year of manufacture: 1999 Clamping force: 2000 kN Clamping force: 200 t Injection unit size: 700 Machine weight: 8,800 kg Location: Freiburg Gjdpsytiqwjfx Abhsbi

Condition: good (used), Year of construction: 2002, clamping force: 1,100 kN, Manufacturer: KraussMaffei Kunststofftechnik München Model: KM 110-390 C2 Machine No.: 1141268 Order Number: 646749/1 Year of manufacture: 2002 Clamping force: 1100 kN Clamping force: 110 t International size designation: 390 C2 / 110 Injection unit size: 390 Operating voltage: 400 V Phases: 3 Frequency: 50 Hz Total current: 164 A Main fuse: 200 A Gbodjytipaepfx Abhji Motor current: 37 A Machine weight: 5800 kg Location: Freiburg

Condition: good (used), Year of construction: 2006, clamping force: 1,550 kN, screw diameter: 30 mm, displacement volume: 113 cm³, injection pressure: 2,500 bar, Injection Moulding Machine Ferromatik Milacron Elektra 155 Manufacturer: Ferromatik Milacron Europe Model: Elektra 155 Evolution Gsdpfjythvrjx Abhebi Machine Type: EE 155 Machine No.: 427077 Year of manufacture: 2006 Clamping force: 1550 kN International size: 1550H-300 Injection pressure: 2500 bar Shot volume: 113 cm³ Screw diameter: 30 mm Motor power: 19.7 kW Heating capacity: 10.2 kW Weight approx.: 7.4 t Operating hours: 77022 h

Condition: ready for operation (used), Year of construction: 2024, clamping force: 3,500 kN, screw diameter: 50 mm, injection weight: 437 g, total width: 2,210 mm, total height: 2,050 mm, overall weight: 18,500 kg, product length (max.): 8,000 mm, Electrical injection moulding machine manufactured in 2024. This Negri Bossi NOVA e350T H1550 features a screw diameter of 50 mm and a clamping force of 3500 kN. It offers a maximum mould opening stroke of 695 mm and a platen size of 1110 × 1200 mm. If you are looking to get high-quality injection moulding capabilities, consider the Negri Bossi NOVA e350T H1550 machine we have for sale. Contact us for further details regarding this machine. • Injection Unit (1550) • Screw L/D ratio: 20 • Theoretical injection volume: 480 cm³ • Injection speed: 300 mm/s • Injection rate: 588 cm³/s • Maximum pressure on material: 2100 bar • Holding pressure: 1100 bar • Screw torque: 900 Nm • Screw speed: 250 rpm • Plasticising capacity (PS): 56 g/s • Barrel heating zones: 5 • Heating capacity: 36 kW • Nozzle contact force: 50 kN • Clamping Unit • Locking force: 3850 kN • Max. mould opening stroke: 695 mm • Min–Max mould height: 350–800 mm • Platen size: 1110 × 1200 mm • Tie bar spacing: 820 × 820 mm Gbsdpfxoytgbye Abhji • Ejector force: 70 kN • Ejector stroke: 200 mm • Power • Total installed power: 216 kW

Condition: excellent (used), Year of construction: 2013, Control system: UNILOG B6 Closing force: 4500 kN Distance between columns: 950 × 700 mm Minimum mold height: 330 mm Maximum mold height: 780 mm Screw diameter: 65 mm Injection pressure: 2070 bar Maximum injection weight: 980.9 g Injection unit: ServoElectric (Knodler) Injection speed: 400 mm/s Servo package S0 ServoPower package S1: hydraulic pump speed control for increased energy efficiency Integrated filter unit: Yes Ejector type: Electric Ejector force: 60 kN Ejector stroke: 180 mm Additional equipment: Air valve Cooling water flow regulator Digital interface for temperature controllers (control of up to 6 thermoregulators) Interface for nozzle needle shut-off control in the mould Interface for external hot runner controller Gbjdeytfqaopfx Abhsi Full integration for Wittmann W8xx series robot Quality control button Language: Polish

Condition: good (used), Year of construction: 2008, operating hours: 59,934 h, screw diameter: 45 mm, displacement volume: 318 cm³, ENGEL Victory 650-120 Tech Stock No.: 503240 Manufacturer: ENGEL Model: VICTORY 650-120 Tech Control: EC200 A02 Year of manufacture: 2008 Operating hours: 59,934 h Technical Data Clamping Unit Clamping force: 1200 kN Platen size (H x V): 740 x 680 mm Minimum mold height: 300 mm Maximum daylight: 800 mm Opening stroke: 507 mm Ejector stroke: 130 mm Ejector force: 40 kN Movable platen centering diameter: 125 mm Fixed platen centering diameter: 125 mm Tool weight: 825 kg Gsdjytfn Eepfx Abhsbi Technical Data Injection Unit Screw diameter: 45 mm Shot volume: 318 ccm Injection pressure: 1525 bar Screw L/D ratio: 20 l/d Screw stroke: 200 mm Screw speed: 290 min⁻¹ Free shot weight (PS): 220 g/s Number of heating zones: 5 Nozzle stroke: 300 mm Dimensions & Weight Machine dimensions (L x W x H): 4.86m x 1.5m x 2.1m Total weight: 7,600 kg Equipment - Display language: German - CEE socket 16A - Hydraulic core pull, 2x - Air valve, 2x - Machine with water battery - Machine without material hopper - Levelling elements - Schuko socket 10A - Tool heating, 8x

Condition: good (used), Year of construction: 2007, operating hours: 68,651 h, functionality: fully functional, clamping force: 1,200 kN, screw diameter: 35 mm, displacement volume: 154 cm³, Equipment: documentation/manual, ENGEL Victory 330-120 Tech Stock no.: 503558 Manufacturer: ENGEL Model: Victory 330-120 Tech Control system: CC100 Year of manufacture: 2007 Operating hours: 68,651 h Technical Data – Clamping Unit Clamping force: 1,200 kN Platen size (H x V): 740 x 680 mm Gbedpfx Ajytfgnsbhsi Minimum mould height: 300 mm Maximum daylight: 800 mm Opening stroke: 500 mm Ejector stroke: 130 mm Ejector force: 40 kN Movable platen centring diameter: 125 mm Fixed platen centring diameter: 125 mm Mould weight: 825 kg Technical Data – Injection Unit Screw diameter: 35 mm Shot volume: 154 ccm Injection pressure: 1,600 bar Screw L/D ratio: 20 l/d Screw stroke: 160 mm Screw speed: 400 rpm Free injection flow: 151 g/s PS Number of heating zones: 4 Nozzle stroke: 250 mm Dimensions & Weight Machine dimensions (L x W x H): 4.5 m x 2.1 m x 2.1 m Total weight: 7,300 kg Equipment Screen text in German CEE socket 16A Hydraulic core pull, 2x Machine including conveyor belt Machine including safety enclosure Machine without material hopper Levelling elements Interface for ejector plate safety Schuko socket 10A Technical Data – Handling Machine type: Linear Brand: ENGEL Control system: ER-HLI41VC Year of manufacture: 2007

Condition: as good as new (ex-display), Year of construction: 2025, SHIBAURA EC280SXIII-i10A Electric Injection Moulding Machine Manufacturer: Shibaura Machine (formerly Toshiba Machine) Model: EC280SXIII-i10A Year of manufacture: 2025 Type: Fully electric injection moulding machine Shibaura (Toshiba) injection moulding machines are among the most precise on the market. The SXIII series is characterised by high accuracy, process stability and extremely low energy consumption. This machine is ideally suited for the production of precision technical components as well as for use in the automotive, electronics, and medical industries. Technical Specifications Clamping Unit: - Clamping force: 2800 kN - Platen dimensions: 1030 × 960 mm - Distance between tie bars: 730 × 660 mm - Minimum mould height: 250 mm Gedpfx Asyrr Iiebhebi - Maximum mould height: 750 mm - Maximum opening stroke: 1350 mm - Maximum ejector stroke: 150 mm Injection Unit: - Screw diameter: 50 mm - Injection volume: 490 cm³ - Shot weight for PS: 450 g - Injection pressure: 2040 bar Electrical Equipment: - Rated motor power: 41.2 kW - Heater power: 15.9 kW This fully electric machine offers: - High process repeatability - Low energy consumption - Very quiet operation - No hydraulic system Dimensions and Weight: - Net weight: 12.5 t - Machine dimensions: 6.7 × 2.0 × 2.2 m

Condition: ready for operation (used), Year of construction: 2021, operating hours: 12,000 h, clamping force: 3,000 kN, screw diameter: 50 mm, injection weight: 375 g, total width: 2,100 mm, total height: 2,500 mm, overall weight: 14,600 kg, product length (max.): 7,000 mm, Electrical injection moulding machine manufactured in 2021. This ZHAFIR ZERES III 3000 / 830 / B5 features a clamping force of 3000 kN and a maximum mould opening stroke of 600 mm. It includes a platen size of 1040 x 1040 mm and a screw diameter of 50 mm. If you are looking to get high-quality injection moulding capabilities, consider the ZHAFIR ZERES III 3000 / 830 / B5 machine we have for sale. Contact us for further details. • Max. mould opening stroke: 600 mm • Min./Max. mould installation height: 280 / 650 mm • Max. platen distance: 1250 mm • Tie bar spacing (H x V): 730 x 730 mm • Min. mould size: 470 x 470 mm • Platen size (H x V): 1040 x 1040 mm • Ejector stroke: 160 mm • Ejector force: 68.6 kN • Injection unit size: Euromap 120 • Screw L/D ratio: 20 • Theoretical shot volume: 412 cm³ • Injection pressure: 2000 bar • Holding pressure: 1600 bar • Injection speed: 160 mm/s • Injection rate (PS): 274 g/s • Screw speed: 320 rpm Gsdpjyrgq Ejfx Abhjbi • Plasticizing rate: 46 g/s • Nozzle contact force: 85 kN • Barrel heating power: 20.2 kW • Connected load: 36 kW / 60 A • Hydraulic pressure: 175 bar • Hydraulic flow rate: 90 l/min • Oil tank capacity: 135 l • Material hopper volume: 50 l • Control system: Sigmatek with 15" colour touch screen • USB interfaces: 3 • Robot interface: Euromap 67 • Robot adapter: Euromap 18 • Form data memory: up to 200 moulds • Production data recording: up to 100000 cycles • Statistical process control (SPC) system • Central lubrication system • Automatic mould height adjustment • Compact 5-point toggle clamping system • Hydraulic ejector system with vibration function • Parallel mould opening and ejector movement • Up to 3 hydraulic core pulls • Cooling water distributor system • PID temperature control system • Ceramic heater bands with thermocouples • Automatic purge function • Energy-saving cylinder insulation • Adjustable machine feet • Installation tools included • Hours: ca. 12,000

Condition: repair required (used), Year of construction: 1999, The machine is currently not operational, the control cabinet is incomplete! Godoyrdzujpfx Abhsbi

Condition: used, Year of construction: 2002, Opportunity to buy a DEMAG injection moulding machine with 1000T clamping force and 140000 working hours. Can be inspected under power upon appointment. Availability: 06/2026 Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection. Clamping force: 1000 tons Opening stroke: 1250 mm Min. mold height: 500 mm Max. mold height: 1200 mm Distance between tie rods: 1400 × 1120 mm Plate size: 1950 × 1670 mm Gjdpfsyq Dqgox Abhsbi Screw diameter: 80–110 mm Injection volume: ± 2000–3800 cm³ Shot weight (PS): ± 1800–3400 g Injection pressure: up to ≈2380 bar Total weight: 72.5 tons (72,500 kg) Total length: 13,184 mm Total width: 3,175 mm Total height: 2,925 mm Max. pressure ($P_{max}$): 190 bar Max. flow rate ($Q_{max}$): 486 l/min System current: 409 A Heating current: 154 A

Condition: ready for operation (used), Year of construction: 2007, operating hours: 1,01,500 h, clamping force: 3,000 kN, overall weight: 19,700 kg, Hydraulic injection moulding machine manufactured in 2007. This Engel Victory VC1800/300 P features a clamping force of 3,000 kN and an opening stroke of 900 mm. It includes a robust control system with a 15" TFT touchscreen and a maximum injection pressure of 1,735 bar. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory VC1800/300 P machine we have for sale. Contact us for further details. Identical Engel Victory VC 1800/300P (2008 model) also for sale — same configurations. Gjdpoyn Ntzsfx Abhebi • Power supply: 3 x 400 V + N + PE / 50 Hz • Control system: ENGEL CC200 A02 (15" TFT touchscreen) • Opening stroke: 900 mm • Maximum platen distance: 1,500 mm • Minimum mould installation height: 600 mm • Ejector stroke: 200 mm • Ejector force: 90 kN • Pump drive power: 37 kW • Injection unit version: M3 • Available screw diameters: 60 / 70 / 80 mm • Screw diameter installed: 70 mm • Maximum swept volume (70 mm): 1,039 cm³ • Maximum screw speed: 226 rpm • Injection rate (70 mm): 385 cm³/s • Specific injection pressure (70 mm): 1,442 bar • Maximum injection pressure (increased): 1,735 bar • Nozzle stroke: 500 mm • Nozzle contact force: 110 kN • Hours: 101,500 h • Maintenance/Service history: • Complete hydraulic hose replacement in 2025 • Motor and planetary gearbox replacement in 2021 • High-pressure cylinder replacement in 2020 • Several cost-intensive main components renewed in recent years Additional equipment • Robot: ENGEL ERC 64 (included) • Axes travel: X 1,200 mm, Y 1,300 mm, Z 3,600 mm • B-axis rotation: -90° to +270° • Vacuum circuits: 4 • Pneumatic circuits: 8 • Reject/quality conveyor belt • Box transfer for 600 x 400 x 250 mm boxes • GWK temperature control tower (optional)

Condition: repair required (used), Year of construction: 1996, functionality: limited functionality, BATTENFELD injection molding machine, model BK-T 1300/630, year 1996. Clamping force approx.: 130 tons (≈1275 kN). The machine has a motor fault and is currently not operational. For sale for repair, refurbishment, or spare parts. Gedpfxsyn I T Ho Abhjbi Available for inspection at the facility in Albacete (Spain). Net price EXW Albacete. Negotiable.

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, clamping force: 1,470 kN, Krauss Maffei KM 150-1000 C1 injection moulding machine from 2003, equipped with a WITTMANN W620 Cartesian robot for automatic part removal. Gbedpjyn Im Hofx Abhji Clamping force: 150 tons (≈1470 kN). This machine is suitable for producing medium-sized technical parts using standard thermoplastic materials such as PP, PE, or ABS. Fully industrial setup with automated system via WITTMANN robot. Available for inspection in Albacete (Spain). Additional technical information and operating video can be provided upon request.

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, clamping force: 1,470 kN, screw diameter: 50 mm, injection pressure: 2,000 bar, opening stroke: 500 mm, overall weight: 7,000 kg, Offered for sale: Krauss Maffei KM 150-1000 C1 injection moulding machine, year 1997, equipped with WITTMANN W711 Cartesian robot for automatic part extraction. Main specifications: Gbodpfxsyn Ilvo Abhei Clamping force: 150 tons (≈1470 kN) Model: KM 150-1000 C1 Year of manufacture: 1997 Includes integrated WITTMANN W711 robot The machine is configured for industrial production and features an automatic handling system with a WITTMANN W711 robot, ideal for processes requiring automatic extraction and reduced cycle times. Suitable for manufacturing medium-sized technical parts in PP, PE, ABS, or other common thermoplastics. Available for inspection in Albacete, Spain. Additional technical information and operational video can be provided upon request.