Tamspark Oy

Condition: new, Travel X / Y / Z 600 / 400 / 310 mm Travel U / V 150 / 150 mm Taper angle / workpiece height 15 degrees / 260 mm; 30 degrees / 110 mm Maximum workpiece dimensions W x D x H 1050 x 820 x 305 mm Maximum workpiece weight 1500 kg Table dimensions W x D 840 x 640 mm Table design Hardened 3-side table Possible wire diameters 0.1-0.3 mm Wire spool capacity 10 kg Automatic wire threader / wire chopper Yes / Yes Overall dimensions W x D x H 2687 x 3030 x 2150 mm Machine weight 3500 kg Mains voltage 3-phase 400 V/AC +/- 10%, 50/60 Hz, 13 kVA Filter tank capacity 860 l Filter particle size / elements 3 um / 2 Temperature control Dielectric cooling unit Filter dry weight 350 kg Generator power supply unit Regenerative transistor pulse type Generator cooling method Fully sealed / indirect air cooling Maximum output current 50 A Generator dimensions W x D x H 600 x 650 x 1765 mm Generator weight 240 kg Input method Keyboard, USB flash drive, Ethernet, 19 inch touchscreen Control system CNC, closed-loop Lrjdpfszgwq Rex Abyon Minimum command step X / Y / Z / U / V 0.1 um Minimum axis resolution 0.05 um Key equipment Tubular shaft drives with linear scales; Control M800 with 19 inch full-touch monitor; Hand pilot with configurable LCD monitor; Automatic vertical front door; Digital AE II generator; Ethernet/DNC/FTP; 2D Cam Magic on-board; Sleep mode

Condition: excellent (used), Year of construction: 2008, operating hours: 32,820 h, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, workpiece height (max.): 400 mm, workpiece width (max.): 700 mm, workpiece length (max.): 1,200 mm, Equipment: cooling unit, Agie Charmilles FI 440 SLP year of manufacture 2008 operating hours 32,820 x, y, z: 550 x 350 x 400 mm u, v: 550 x 350 mm linear glass scales on all axes 0.5 μm max. workpiece dimensions 1200 x 700 x 400 mm max. taper angle 30 degrees chiller option for large wire spool Lodpfxjzgu Igj Abyjrn option for wire chopper automatic wire threading/cutting and repair documentation and software machine powered up for inspection

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, GF AgieCharmilles CUT 300 Year of manufacture: 2012 Charmilles Millenium control system Travel ranges (X / Y / Z): 550 x 350 x 400 mm Travel ranges (U / V): 550 x 350 mm Max. conical angle: +/- 30° at a height of 400 mm Integrated Collision Protection (ICP) on all 5 axes Lodpfx Ajzgt R Hebysrn Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1500 kg Cutting speed of 340 mm²/min Best surface finish: Ra 0.2 µm Available wire diameters: 0.15 mm to 0.33 mm Dimensions of the complete system: 2600 x 2540 x 2240 mm Total weight of the system: 3300 kg After receiving your order, we will clean and overhaul the machine and test all functions. You will receive a warranty of 6 months on the machine. We would be happy to offer you the commissioning of the machine.

Condition: used, Year of construction: 1996, machine/vehicle number: 06E3001, workpiece weight (max.): 2,000 kg, travel distance X-axis: 700 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 350 mm, table width: 680 mm, overall weight: 5,000 kg, table length: 980 mm, Details: Brand: Mitsubishi Model: EX30 Serial number: 06E3001 Year of manufacture: 1996 Lsdpozggdmjfx Abyorn Control: Mitsubishi C11 fuzzy logic Fi-60e Table size: 980x680 mm X-axis: 700 mm, Y-axis: 500 mm, Z-axis: 350 mm Max. workpiece weight: 2000 kg Documentation available 400 Volt Machine weight: approx. 5 tons Equipped with a Kouwa GK-50-LFV-DI cooler with R407C refrigerant As well as an external chiller Machine construction: column with worktable Components found: external unit on a pallet, various hoses and cables Condition: used

Condition: used, Year of construction: 1988, functionality: fully functional, workpiece weight (max.): 350 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 270 mm, wire diameter (max.): 0.3 mm, table width: 450 mm, overall weight: 2,300 kg, table length: 600 mm, table height: 300 mm, empty load weight: 2,300 kg, You get two machines for the price of one. One is fully functional and in good condition for its age, equipped with a collecting system (sliding slats). The other can be made functional again with minimal effort, but the new owner can also use it for spare parts (all electrical cards are intact; the pump system and wiring harness require repair). Lrodpfx Aszcww Rsbyon The Matra Fanuc Tape Cut W2 is a classic and extremely reliable CNC wire EDM machine manufactured in 1988. This machine combines the cutting-edge technology of the Japanese Fanuc control system with the precision of the German Matra machine tool engineering.

Condition: used, Year of construction: 2012, Automatic wire threading, Travel range: x 600 mm y 400 mm z 310 mm Includes cooler Ledpszcdwwofx Abysrn Machine is in excellent condition.

Condition: used, Year of construction: 2013, functionality: fully functional, GF AgieCharmilles Progress VP3 Year of manufacture: 2013 Travel ranges: X = 500 mm, Y = 350 mm, Z = 426 mm Lsdpfx Abjzcdtxeyorn Travel ranges U/V axis: +/- 70 mm Maximum taper: 30° at a height of 100 mm Available wire diameters: 0.15 – 0.33 mm Wire EDM machine with automatic wire threading and

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, workpiece weight (max.): 800 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 256 mm, workpiece height (max.): 250 mm, workpiece width (max.): 650 mm, workpiece length (max.): 1,050 mm, GF AgieCharmilles Vertex 3F, Year of manufacture: 2007 Travel ranges: X = 500 mm, Y = 350 mm, Z = 256 mm Travel ranges U/V axis: +/- 70 mm Maximum taper: 30° at a height of 100 mm Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface quality: Ra: 0.05 µm Available wire diameters: 0.03 – 0.33 mm (including fine wire module) Wire EDM machine with automatic wire threading With automatically lowerable tank (accessible from 2 sides) Including AGIEJOGGER handheld control unit for convenient setup Including AGIESETUP 3D AGIEVISION 5 control system Lrjdpfx Aozcap Asbyen AGIE IPG-V generator Dimensions (length x width x height): 2800 x 2400 x 2220 mm Net weight: 4500 kg After receiving your order, we will clean, overhaul, and thoroughly test the machine. You will receive a 6-month warranty on this! Includes user training at Techma on your overhauled machine. Optionally, we can also offer you the following services: - Transport - Commissioning - Training - Cooler

Condition: used, Year of construction: 2008, controller manufacturer: Sonstige, controller model: , _____ Description: Year of manuf. : 2008 Control : Sonstige Movement X/Y/Z : 550/350/400 mm Workingspace: Movement in X/Y/Z:550/350/400 mm Movement in U/V:550/350 mm Table size:900 x 600 mm Workpiece dimensions (max.):1.200 x 700 x 400 mm Load capacity (max.):1.500 kg Dielectricheight (min./max.):0/435 mm Clearance angle (max.):+/- 45°/400 mm Generator: Technology:ISOPULS-Doppelquellengenerator Cutting speed:400 mm²/min Finest arbitration:0,20 μm Ra Wire: Lsdpfx Abjzbzb Rsyern Standard diameter:0,25 mm Wire guiding:Closed diamond guides Equipment/Accessory: Tankcapacity:1.200l Dielektrikum Dielektrikumsmanagement I:Filtercartige Dielektrikumsmanagement II:Chiller, Eckert Setup operations:Electronic Handwheel Workpiececlamping:Clampingjaw, EROWA Further Accessory:Misc. Electrodeholder, clamping devices and Erodingwire : Attention:The displayed Deionisationsfilters are not included in our offer.

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, workpiece weight (max.): 800 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 256 mm, GF AGIECHARMILLES CUT 3000 Year of manufacture: 2012 Travel ranges: X = 500 mm, Y = 350 mm, Z = 256 mm Travel ranges U/V axis: +/- 70 mm Maximum taper: 30° at 100 mm height Ljdpfozbbmtex Abyern Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface quality: Ra: 0.05 µm Available wire diameters: 0.10 – 0.33 mm Wire EDM machine with automatic wire threading With automatically lowerable tank (accessible from 2 sides) Includes AGIEJOGGER handbox for convenient setup Includes AGIESETUP 3D Includes automatic wire changer AWC (using 2 wire spools) VISION 5 control AGIE IPG-V generator Dimensions (length x width x height): 2800 x 2400 x 2220 mm Net weight: 4500 kg The machine will be completely cleaned, overhauled, and thoroughly tested. Subsequently, a laser measurement of the axes will be performed at our facility. We would be happy to carry out an individual test on the CUT 3000 for you. Includes operator training at Techma on your overhauled machine. Optionally, we offer you: - Transport - Commissioning - Cooling unit - Clamping devices - Consumables

Condition: used, Year of construction: 2022, Mitsubishi MV2400R High-Precision Wire Electro-Discharge Machine. Serial No. 52DU2438 (2022), Mitsubishi D - Cubes Series Control, Max Workpiece Dimensions 1050 x 820 x 305mm, Max Workpiece Weight 1500kgs, Travel X/Y/Z/U/V = 600/400/150/150mm, +/-75mm, Machine Weight 3500kg. Lodpfx Abszbat Soysrn Please note: This lot has been professionally decommissioned Location: This lot is located in Burton-on-Trent. A charge of £450 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: used, Year of construction: 2022, Mitsubishi MV2400R High-Precision Wire Electro-Discharge Machine. Serial No. 52DU2438 (2022), Mitsubishi D - Cubes Series Control, Max Workpiece Dimensions 1050 x 820 x 305mm, Max Workpiece Weight 1500kgs, Travel X/Y/Z/U/V = 600/400/150/150mm, +/-75mm, Machine Weight 3500kg. Ljdpfxszbamxj Abyjrn Please note: This lot has been professionally decommissioned Location: This lot is located in Burton-on-Trent. A charge of £450 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: used, Year of construction: 2002, Voltage: 400V / 50/60Hz / 3 phases Machining method: Immersion Maximum workpiece size: 1200x700x400 mm Maximum workpiece weight: 1500 kg Table dimensions: 900x600 mm Distance from floor to table: 900 mm Total dielectric fluid volume: 1200 L Ledpfx Abjza U Nlsyorn Axes X, Y, Z, U and V Travel ranges X, Y, Z: 550 x 350 x 400 mm Travel ranges U, V: 550 x 350 mm Collision protection: Axes X, Y, U, V, Z Tapered cutting, max. taper: +/- 30° / 400 mm Available wire diameters: Ø 0.25 mm (Option 0.1/0.2/0.3 mm) Wire guide type: Closed diamond guide, gap-free Available spool weight and type (DIN standard): 1.6 kg (K 100) to 8 kg (K 160) Available spool weight and type (JIS standard): 3 (P3) to 5 kg (P5) Dielectric fluid Paper filter: 2 cartridges Dielectric fluid temperature: +/- 1°C Total volume of ion exchange resin: 20 L Maximum injection pressure: 20 bar Generator: Dual source Isopulse Total power: 10 KVA Maximum cutting speed: 400 mm²/min Minimum surface roughness: 0.20 microns Ra Measuring system: Glass scales Measuring resolution: 0.5 microns Servo motors: AC type All technical specifications are subject to change without notice; errors and omissions excepted. The machine was fully functional until it was dismantled. Warranty is excluded.

Condition: ready for operation (used), Year of construction: 2002, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 426 mm, wire diameter (max.): 0.3 mm, overall weight: 3,900 kg, number of axes: 5, wire diameter (min.): 0.15 mm, This 5-axis AGIE Classic 3s wire EDM machine was manufactured in 2002. It features an X-axis travel of 500 mm, Y-axis travel of 350 mm, and Z-axis travel of 426 mm. The machine is equipped with a submerged head and includes a chiller, resin filters, and a wire feed/recovery system. If you are looking to get high-quality wire EDM capabilities, consider the AGIE Classic 3s machine we have for sale. Contact us for further details. • U/V axes travel: ±70 mm • Number of controlled axes: 5 (X, Y, Z, U, V) • Taper cut: up to ±30° • Generator: MC 3S (Lista 030.844) • Axis driver (DA): DA MC 3S (Lista 030.834) • Electrical cabinet: Cabinet Classic 3S (Lista 027.254) • Power supply voltage: 3×400 V / 50 Hz Lodoy Ulp Tjpfx Abyjrn • Installed power: 9 kVA • Rated current: 14 A • Dielectric: Deionized water • Heads type: Submerged with wire guide nozzles • Wire drive motor: +GF+ / Maxon Motor (Swiss made) • Circuit diagram: 628.992 Additional equipment • MTA chiller (included in the sale) • Resin filters • Deionizers • Wire feed/recovery system

Condition: good (used), Year of construction: 2012, functionality: fully functional, workpiece weight (max.): 4,100 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, CNC Control without chiller Technische Daten – technical details: Verfahrweg X / travel X 350 mm Verfahrweg Y / travel Y 250 mm Verfahrweg Z / travel Z 250 mm Verfahrweg U / travel U +-45 ° Verfahrweg V / travel V +-45 ° max. konischer Schnitt / max. cone cutting +-10 ° Max. Dimensionen des Werkstücks / max. dimensions of the workpiece 820x680x250 mm Tischabmessungen / table size 700x480 mm max. Werkstückgewicht / max. workpiece weight 4100 kg Lrodpoy S Tp Ajfx Abyen Gewicht ca. / weight ca. 2640 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, Year of construction: 2013, Wire erosion / EDM Travel distance X: 600 mm Lredpfxoy S Tgzs Abyen Travel distance Y :400 mm Travel distance Z: 350 mm max. workpiece size X: 800 mm max. workpiece size Y: 570 mm max. workpiece size Z: 340 mm max. workpiece weight: 1000 kg table size X: 1050 mm table size Y: 710 mm with AWF ( Automatic Wire Feeding ) U / V axis: 150 x 150 mm submerged CNC Control: SPW

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Wire EDM machine type Agiecut Classic 2s, year of manufacture 2004, for sale. The machine is in good condition and operates flawlessly. An inspection under power is gladly possible. A video is also available upon request. Technical machine data: Agiecut Classic 2S • Manufacturer: AGIE SA, CH-6616 Losone (Made in Switzerland) • Model / Type: AGIECUT CLASSIC 2S • Year of manufacture: 2004 (with CE marking) • Serial number (unit): 663 Lrsdpfoy Snm Nox Abyjn • Equipment list No.: C32.102 • Circuit diagram No.: 629.412 Electrical connection values & performance • Voltage: 3 x 400 V • Frequency: 50 Hz • Power: 9 kVA • Rated current: 14 A • Short-circuit current: 10K Weight & components • Total weight: 2,580 kg • Subcomponents (serial numbers): o MC 2S CLASSIC (unit): Serial 663 / Equipment List 002.354 o DA CLASSIC 2S: Serial 659 / Equipment List 033.804 o CABINET CLASSIC 2S (control cabinet): Serial 665 / Equipment List 028.254 Loading can be arranged by us upon agreement. If you have any questions, please feel free to contact us at any time.

Condition: good (used), Year of construction: 2006, MACHINE Wire EDM Machine Manufacturer: Mitsubishi Machine Model: FA 20 Control: Year of Manufacture: 2006 TECHNICAL DATA Travel distances - X-axis: (mm) 500 - Y-axis: (mm) 350 - Z-axis: (mm) 300 Machine Table - Table size, fixed table L x W: (mm) 780 x 630 - Max. table load: (kg) 1,500 - Workpiece dimensions: (mm) 1,050 x 800 x 295 Lodpfx Aboy Snbmjyorn

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, total height: 2,150 mm, total width: 1,050 mm, wire diameter (max.): 0.3 mm, overall weight: 3,500 kg, controller manufacturer: MITSUBISHI, controller model: D‑CUBES / M800 series, product length (max.): 3,030 mm, number of axes: 5, wire diameter (min.): 0.1 mm, This 5-axis Mitsubishi MV2400R wire-cut EDM machine was manufactured in 2017. It features an X-axis travel of 600 mm, Y-axis travel of 400 mm, and Z-axis travel of 310 mm, accommodating workpieces up to 1050 × 820 × 305 mm and weighing up to 1500 kg. If you are looking to get high-quality wire-cutting capabilities, consider the Mitsubishi MV2400R machine we have for sale. Contact us for further details. • Axis travels: U ±75 mm, V ±75 mm • Max. workpiece dimensions (W × D × H): 1050 × 820 × 305 mm • Max. workpiece weight: 1500 kg Lredoy Rrcfepfx Abyon • Table dimensions (W × D): 840 × 640 mm • Max. taper angle: 15° at 260 mm workpiece height • Wide‑angle taper (option): up to 45° at 60 mm (with special guides) • Positioning accuracy: ≤ ±2 μm over full stroke (MV‑R series spec) • Dielectric tank capacity: 860 L • CNC control: Mitsubishi D‑CUBES / M800 series; Industry 4.0 ready (networking and monitoring interface) • Machine condition: Excellent condition; very low hours • Industry 4.0: Prepared for connectivity

Condition: ready for operation (used), Year of construction: 2006, operating hours: 32,000 h, functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 550 mm, travel distance Y-axis: 370 mm, travel distance Z-axis: 410 mm, controller model: Fanuc Alpha 180is-WB, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates the buyer to collect the item within the specified deadline, by 08.06.26! TECHNICAL DETAILS Workpiece weight: 1,000 kg Travel distance X-axis: 550 mm Travel distance Y-axis: 370 mm Travel distance U-axis: 410 mm Travel distance V-axis: 120 mm Travel distance Z-axis: 120 mm Ledpfey Nmxxsx Abysrn Maximum cutting angle: 30° Number of axes: 5 Rapid traverse X-axis: 900 mm/min Rapid traverse Y-axis: 900 mm/min Rapid traverse U-axis: 450 mm/min Rapid traverse V-axis: 450 mm/min Rapid traverse Z-axis: 900 mm/min MACHINE DETAILS Control system: Fanuc Alpha 180is-WB Operating hours: approx. 32,000 h Machine weight: 3,100 kg EQUIPMENT Automatic wire threading Note: Sale does not include the monitor above the control unit.

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 55DM2752, workpiece weight (max.): 1,500 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, wire diameter (max.): 0.3 mm, TECHNICAL DETAILS Travel range X-axis: 600 mm Travel range Y-axis: 400 mm Travel range Z-axis: 310 mm Travel range U-axis: ±75 mm Travel range V-axis: ±75 mm Wire diameter: 0.1 - 0.3 mm Ledpjy I Uvcofx Abyjrn Max. workpiece dimensions: 1,050 x 820 x 305 mm Max. workpiece weight: 1,500 kg Table dimensions: 840 x 560 mm Table design: U-shaped Taper angle: max. 15° Taper angle at workpiece height: max. 260 mm MACHINE DETAILS Dielectric tank Tank capacity: 860 l Filtered particle size: 3 µm Water purifier: 10 l Dry weight: 350 kg General power supply: 13.5 kVA Air pressure: 0.5 - 0.7 MPa Air consumption: 75 l/min or more Dimensions & Weight Dimensions (W x H): 2,022 x 2,150 mm Weight: 3,500 kg

Condition: used, Year of construction: 2018, Technical details: x-travel: 650 mm y-travel: 450 mm z-travel: 420 mm control: MAKINO Hyper i U-axis: ± 75 mm V-axis: ± 75 mm max. size of workpiece LxWxH: 1000 x 800 x 400 mm workpiece weight: max. 1500 kg Table dimensions: 910 x 710 mm weight of the machine ca.: 5 t Dimensions (L/W/H): 3 x 3 x 2,3 mm Accerories Ljdpey I Ak Ijfx Abyern Memory 10 GB Ethernet I/P Interface Wire EDM in good condition. *

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, overall weight: 2,650 kg, input frequency: 50 Hz, Possible accessories can be discussed on site. Lodpfxoy Irdks Abyern

Condition: good (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 1320, workpiece weight (max.): 450 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 220 mm, total height: 2,080 mm, total length: 1,650 mm, total width: 2,225 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 220 mm, workpiece width (max.): 400 mm, workpiece length (max.): 600 mm, table width: 400 mm, table length: 600 mm, feed length X-axis: 350 mm, feed length Y-axis: 250 mm, feed length Z-axis: 220 mm, tank capacity: 600 l, Equipment: compressor, cooling unit, documentation/manual, fridge, For sale: SODICK CNC Wire EDM - Model: AQ325L LN 1W - Year: 2002 - Serial No.: 1320 Lrsdpfjy Ib Ewex Abyjn The machine has been regularly maintained by BTS COMPANY d.o.o. and CELADA d.o.o.. It has been used for machining workpieces up to 5 kg and various toolmaking tasks. Due to its high precision, it can also be used as a measuring machine. It is connected to the electrical grid and ready for operation.

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: 0120, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, type of input current: three-phase, overall weight: 4,400 kg, input voltage: 400 V, input frequency: 50 Hz, input current: 13 A, Equipment: documentation/manual, We offer this used AGIE AGIECUT EVOLUTION 3 wire EDM machine, year of manufacture 1998. Serial number: 0120 Machine list: C31001,8 Year of manufacture: 1998 Lrjdpfx Aey Hfa Ajbysn Wiring diagram number: 627232,2 Weight: 4,400 kg Voltage: 3 x 400 V Frequency: 50 Hz Power: 9 kVA Rated current: 13.1 A If you have any questions or require further information, please feel free to contact us by message or phone.