Used Schenck Balancing Machine for sale (19)

Condition: good (used), Year of construction: 2010, SCHENCK RoTec HM30BU Horizontal Hard-Bearing Balancing Machine with Belt Drive Tjdezw E Thjpfx Abtsb Manufacturer: SCHENCK RoTec GmbH Model / Type: HM30BU Year: 2010 Maximum rotor weight: up to 700 kg Maximum rotor diameter: approx. 1,260 mm Maximum bearing center distance: approx. 1,330 mm Bearing journal diameter: approx. 9-140 mm

Condition: used, Year of construction: 1990, Technical details: Tjdpfxozuyd No Abtsb balancing body max.: 7000 kg balancing body diameter w/o machining unit: 1870 mm balancing body diameter with machining unit: 1870 mnm distance between bearing centers: min. 200 mm rotation weight: 7000 kg Rotor-Ø: 1870 mm Bearing journal Ø: 40 - 180mm mm control: CAB 690 voltage: 380 V /50Hz V/Hz Rotor weight: 40–7,000 kg Machine overload capacity with symmetrical loading: up to 9,000 kg, i.e. max. 4,500 kg per bearing pedestal 1 × machine bed, divisible: 3.85 m + 2.0 m *

Condition: used, functionality: fully functional, Used Schenck Balancing Machine H 50 V/B with used CAB 690 H measuring unit. (Can be upgraded to a new CAB 920 unit for an additional (18 000–20 000€) Todpfx Abex Ein Sstjb The machine comes with original foundation drawings, documentation and manuals. The machine can be test run in Kerava. Rotor Capacity - Rotor weight range: 20 – 6 000 kg - Maximum symmetrical load on pedestal bearing: 7 500 kg - Maximum symmetrical load on stand bearing: 3 750 kg - The machine can be loaded freely with lower weights when following recommended procedures. - Maximum rotor length between pedestals:1 600 mm (belt drive) - Maximum diameter over machine base: 2 100 mm - Clamped rotor diameter ranges: 25–180 mm, 180–380 mm - Machine bed length: 3 500 mm - Balancing speed n depends on the rotor’s moment and must be selected to avoid overloading the drive. - Maximum permissible G·n² value: 1400 × 10⁶ kg/min² - Applies to a rigid symmetrical rotor mounted on pedestal bearings. - May be exceeded during dynamic tests on flexible rotors and strength tests. - End drive / FU motor: 7,5 kW - 4-speed gearbox: 120–2520 rpm - Belt drive BU 5 / FU: 7,5 kW - Unbalance Umar 0,5 gmm/kg: 0 gmm/plane

Condition: good (used), Year of construction: 1983, functionality: fully functional, machine/vehicle number: AHG0482, workpiece weight (max.): 7,000 kg, total width: 2,400 mm, total length: 5,100 mm, total height: 2,000 mm, input voltage: 400 V, rotor diameter: 1,600 mm, year of last overhaul: 2026, The testing machine is currently in operation. Due to a relocation of operations, it can be dismantled in February 2027. The drive has been converted to direct current. We use the system as follows: up to 7000 kg, up to 700 rpm up to 2500 kg, up to 1500 rpm up to 1500 kg, up to 3000 rpm up to 250 kg, up to 4200 rpm Tjdpjzu Rguofx Abtsb The system can be inspected in Neusäß by prior arrangement.

Condition: excellent (used), Year of construction: 2012, operating hours: 1,800 h, functionality: fully functional, workpiece weight (max.): 20,000 kg, total width: 3,000 mm, total length: 9,000 mm, total height: 3,000 mm, type of input current: DC, SCHENCK, HM60U, max diameter 3000mm, max weight of rotor 20.000 kg, New measuring unit CAB920 SmartTouch (2025) SCHENCK, Protection enclosure included, CE sign, calibration certificate February 2026, drive 75kW drive with high speed gear box 3 shifts, pair of roller bearing for journal dia. 50 - 200 mm, pair of roller bearing for journal dia. 200 - 400 mm, lubrification system for roller carriages Tsdpsylin Hofx Abtsb

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: RFVD 0018, Used fully fuctional Schenck RoTec Distec Balancing Machine The machine comes with original foundation drawings, documentation and manuals. The machine can be test run in Kerava. Tsdjyxwmljpfx Abtjb Technical data: - Max. rotor diameter: 500 mm - Max. rotor height: 150 mm - Max rotor weight: 30 kg (option for 70 kg) - Countinuously variable balancing speed: 600-1000 1/min - Measurement uncertainty: 4 gmm - CAB 870 touchscreen operation - Automatic drilling unit - Weight approx: 2200 kg - Space requirement approx: W1200 x D2700 x H1900 mm

Condition: used, Electrodynamic balance shaft balancing machine, vertical balancing machine, balancing machine SCHENCK RoTec Type EBLY Manufacturer No. 1FLY, Year of Manufacture 2000 Workpiece/Test Specimen: Balance shafts Number of measuring planes: 2 Number of balancing planes: 2 Angle of balancing components: 145 - 215° Test specimen weight: max. 10 kg Indicated unbalance: 2 gmm/square Lowest value per scale value: 8 gmm/square Balancing spindle speed: 1200 rpm Scale disc with test specimen holder Ø 320 mm Test specimen diameter max. 400 mm Vibration sensor: P01 force sensor Angle position sensor: HBBC incremental encoder CAB 750 microprocessor measuring device RS232 serial interface Workpiece weight: 2.2 kg Workpiece length: 250 mm Workpiece diameter: 70 mm Power supply: 400 V, 50 Hz Rated current: 16 A - SCHENCK M341 balancing indicator Space requirement: L x W x H: 2000 x 1800 x 2000 mm Tedjwgnu Nspfx Abtob Weight: 620 kg Good condition

Condition: used, Technical details: traction force: 250 kN control: SCHENCK HYDROPULS PSB dayligth: 1000 - 1200 je nach Spannwerkzeug /acc. clamp.tool mm piston stroke: 180mm mm A servo-hydraulic leaf spring testing machine with Series 65 digital electronics is designed for testing leaf springs used in commercial vehicles, railway vehicles, and industrial applications. A hydraulic actuator applies defined loads while force, displacement, and, if required, strain are measured. Typical tests: Tsdjzi R R Aspfx Abtob ·Static spring characteristic (force-displacement curve) ·Fatigue and endurance testing ·Cyclic load testing ·Service life testing ·Tensile and compression testing ·Production quality control *

Condition: like new (used), Manufacturer: Schenck Tjdpfsg Snvmox Abteb Size: 1.600 x 1.200mm Unbalance Motor: 2 Pcs. SE 1,5 / 4 (0,8 kW / 1.400 RPM) (220 / 380V. – 3,7 / 2,15A) With Rubber Protection. Springs included

Condition: excellent (used), Year of construction: 2014, workpiece weight (max.): 16 kg, input voltage: 230 V, year of last overhaul: 2025, SCHENCK TBsonio High Speed Balancing machine for turbocharger core assemblies Tjdpfx Aoq Nin Ujbtjb

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, workpiece weight (max.): 300 kg, total width: 1,260 mm, total length: 1,500 mm, Universal dynamic balancing machine for rotors from 3 - 300kg. CAB803 measuring system, class C protection, CE mark Todpfx Abeu Nmppstjb

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, workpiece weight (max.): 30 kg, input voltage: 400 V, rotor diameter: 600 mm, year of last overhaul: 2023, power: 1.1 kW (1.50 HP), Balancing machine upgraded in 2009. 1 Machine base, welded construction 1 Balancing unit Vertical, single plane, permanently calibrated, 1 special spindle with centric flange 1 piezo-electric vibration sensor 1 3-phase drive motor of 1.5 kW, driven by a belt 1 Protractor disk 300 mm diameter, with 360 °, mounted on the spindle 1 Safety guard For diameters up to 600 mm and heights of 420 mm 1 SCHENCK CAB 803 measuring device - With direct data entry system via touch screen - Industrial PC with active TFT color monitor - Visualization of results via vector meters - Network capability - Polish dialogue - Modular, easy-to-use system design - Optimized signal processing system via digital Schenck MMD filter - Intelligent, self-diagnosing measurement electronics system - Operation using standard Windows routines - Programs for: - Straight compensation, keyway, compensation index - Tolerance calculation according to ISO 1940 - Log report in PDF format Tsdpfx Asq Umcrebteb Balancing speeds from 0 to 720 RPM - Smooth Max residual unbalance 5 - 10 gmm (DIN 1319)

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, workpiece weight (max.): 10 kg, input voltage: 230 V, year of last overhaul: 2023, SCHENCK Highspeed Special Balancing Machine Type 110 MBRS for turbocharger core assemblies a for service, repair shops as well as research and development departments. The correction of the static unbalance can be performed inside the balancing machine on the compressor wheel side directly on the machine. Max balancing speed 250,000 rpm Todpoq I Rz Rofx Abtsb

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, workpiece weight (max.): 5 kg, total width: 360 mm, total length: 700 mm, Universal dynamic balancer for rotors from 10g - 5kg Tedpfx Aeuh Svpobtjb

Year of construction: 2004, condition: ready for operation (used), overall weight: 16,000 kg, Horizontal universal balancing machine manufactured in 2004. This SCHENCK HM 70U BU features a maximum workpiece weight of 50,000 kg and a maximum workpiece length of 15,000 mm. It includes a control unit with CAB 920 software and a total power requirement of 75 kW. If you are looking to get high-quality balancing capabilities, consider the SCHENCK HM 70U BU machine we have for sale. Contact us for further details. Tjdozl D U Hspfx Abtjb - machine type: Horizontal universal balancing machine- Control/Measuring Unit: CAB 920 (Software Version: V 5.3.1504)- Max. Workpiece Weight: 50,000 kg- Max. Workpiece Length: 15,000 mm- Max. Workpiece Diameter: 2,800 mm- Optional Balancing Capacity: Parts with Ø 4,090 mm and max. length of 1,200 mm- Bearing Center Distance: 5,050 mm- Drive Types: Cardan shaft drive + Belt drive- Safety Category: Class B protective shielding/guards- Transmission power (propeller shaft drive) 160 kW- Belt drive power 22 kW- Last Technical Inspection: September 2022- Space Requirements: Approx. 17 x 5 m- Control Panel Integration: Houses CAB 920 display, analog gauges (ampere meters), emergency stop button, key switch selectors, and a pull-out tray- Electrical Cabinet Hardware: Equipped with industrial frequency converters (ABB brand) and power distribution switchgear

Condition: new, “UNUSED – Krupp 1.700 x 8.000 mm with DU 3 Unbalance Exciter“ for Sale Also many other manufacturers like: Schenck / Siebtechnik / Cyrus / Binder Find our complete stock on our website. Tedpfxjggfkqs Abteb Manufacturer: Krupp Size: 1.700 x 8.000mm Unbalance Exciter: DU 3 (on top) Included: – Electrical Motor – Cardan shaft – Rubber Bumpers

Year of construction: 2007, condition: as good as new (ex-display), “UNUSED – Schenck SLG 2.500 x 5.700 mm“ for Sale Find our complete stock on our website. Manufacturer: Schenck Type: SLG Size: 2.500 x 5.700 mm Deck: 1 Tsdpfx Aboglvw Iotjb Fert. No.: VO35406.A01 Year of Manufacture: 2007

Year of construction: 2019, condition: like new (used), “Unbalance Exciters / Erregers“ for Sale Over 60 Pcs. of Unbalance Exciters in stock! Unused, Good Used and Overhauled! From Manufacturers like: Schenck, Jöst, Krupp, Siebtechnik, etc. Schenck: – Schenck D 00 Tedsglvviepfx Abtjb – Schenck DF 2 – Schenck D 3 – Schenck DF 3 – Schenck DF 300 S – Schenck DF 401 S – Schenck DF 5 – Schenck DF 5L – Schenck DF 5S – Schenck DF 5V – Schenck DF 501S – Schenck DF 501V – Schenck DF 7 Siebtechnik: – Siebtechnik GR 2 – Siebtechnik GR 3 – Siebtechnik GR 30 – Siebtechnik GR 32 – Siebtechnik GR 31 – Siebtechnik GR 40 – Siebtechnik GR 41 Krupp: – Krupp DU 1 – Krupp DU 2 – Krupp DU 200 – Krupp DU 3 Jöst / Mogensen: – Jöst JR 200 – Jöst JR 206 – Jöst JR 208 – Jöst JR 400 – Jöst JR 408 – Jöst JU 6 - Jöst JU 600 – Jöst JR 600 – Jöst JR 608 – Jöst JU 800 Honert: – Honert H 2 U 20 – Honert H 2 U 40 – Honert H 2 U 50 Friedrich / Cyrus – Friedrich UE 20 S – Friedrich UE 45 UHDE: – UHDE P 1500

Year of construction: 2010, condition: used, Crane scale, Schenck, 1000 kg capacity. Tsdeiwurgepfx Abteb