Ironsouls

Condition: ready for operation (used), Plastic Film Wash Line with Extruder Available in Ireland Can be seen running if necessary Sink Float Tank Centrifuge Washer Dryer Extruder Granulator Shredder Everything required for the washing and recycling of Plastic Material Bledpjzylxijfx Abtsl 1 Tonne per Hour

Year of construction: 2001, condition: good (used), Brand: Rollepaal B.V. Type: A-Rex 90-33 Type number: E309.0001 Screw: Single Screw diameter: 90 mm L/D ratio: 33 Bedszx Da Aepfx Abtell Serial number: 230/400 Year of manufacture: 2001

Year of construction: 2023, operating hours: 200 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 230608, 4. Main Extruder Type: CWT95-Plus co-rotating twin-screw extruder; L/D 48 Machine Description: *IE5 AC 250 kW motor *Gearbox: Precise balancing principle applied to increase torque level; High safety factor design; Latest steel alloy material for gears, applied with special heat treatment and manufactured to a high level of precision; Imported NSK bearings and sealing rings; Special lubrication system combined with immersion and forced lubrication solutions; Latest generation plate heat exchanger configured for optimal cooling; Input/output rotation speed: 1480/600 rpm; Torque: 2x1990 N.M Oil pump: 1.5 kW With heat exchanger, flow meter, oil pressure gauge *Power Transmission: Compomac safety clutch torque limiter from Italy, with speed sensor *Extrusion Line: Screw diameter: 93 mm, L/D: 48:1; Maximum screw speed: 600 rpm; Screw configuration: modular structure, torque transmission via splines; Screw material: W6Mo5Cr4V2, surface hardness HRC58～64; Barrel configuration: modular structure, each barrel with a length of 4L/D; The inner surface of the linear material is made of α101, surface hardness is HRC62-64; Barrel No.1: Feeder for all possible components, No. 4 and No. 6 with a side feed port and a venting port. No. 8, 9, 11 with a suction port for degassing. The screw profile will be determined based on the requirement. *2 side feeders for lateral feeding *1 set of degassing adapted to the needs Liquid ring pump, 1m3 water tank, gas and vapor recovery system *Electrical Cabinet Enclosure: Rittal Bledpfx Abszxxifstol Heat Exchanger: Apex Variable Frequency Drives: ABB PLC: Siemens Components: Schneider Electric *Spare Parts One set of screw and barrel elements and one set of shafts will be delivered with the machine.

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: DS70 086, total length: 3,500 mm, total width: 1,200 mm, total height: 1,800 mm, overall weight: 3,000 kg, Parallel twin-screw extruder - Manufacturer: WEBER - Type: DS 7.22 - Year: 2006 - Parallel twin screw, ø70mm, 22LD - 5 heating zones on the cylinder + 2 cooling zones - Motor: 30kW Bedpfx Abozxr Uujtsll - Up to 40 rpm - Up to 180kg/h - tube and 120kg/h - profile (depending on material and tooling)

Condition: like new (used), Year of construction: 2006, operating hours: 4,545 h, functionality: fully functional, screw diameter: 114 mm, overall weight: 7,500 kg, A KMD114-32 P in like-new condition is for sale. This extruder comes from a technical institute and is therefore from a single owner. Bledpfx Aezxhfiebtjl The operating hours are original and can be verified. The screw and cylinder are in like-new condition. The gearbox runs very smoothly. Includes adapter, hopper, and loading onto a truck. Technical specifications: - Year of manufacture: 2006 - Screw for profile: 684 2929 / 8880 - Internal screw temperature control, welded tips - Maximum screw speed = 17 min-1 - Maximum dosing speed = 260 min-1 - 5 cylinder zones, 15 tool zones + 4 lip heaters, melt temperature, melt pressure - C5 control system with puller control, language E/D An inspection in 84405 Dorfen is possible at any time. If you have any questions, please do not hesitate to contact us.

Year of construction: 2002, condition: good (used), functionality: fully functional, An ultra reliable 130 / 160mm OMP Prealpina plastics extruder, supplied by ourselves back in 2002. I have know the extruder history since new as i was the supplying agent originally. Originally supplied to reprocess confectionery Polypropylene films with 100% heavy print on the film , it performed very well in degassing and compounding the plastics materials till that contract expired. The extruder is a cascade version , allowing significant extra gas venting and polymer mixing, by utilizing a second short barrel 160mm extruder to deliver molten and clean plastic to a die face cutter, followed by a centrifuge to dry the pellet. The line has recently been fitted with an ultra efficient FIMIC fully automatic screen filter, providing probably the most efficient filtration available to plastics recyclers. being a cascade configuration , with superior filtration and venting , the line is most suitable for difficult plastics films or fibre recycling. The line has a 7 cu metre silo feeding directly into a force feed conical delivery system to the feed zone of the 130mm extruder. There is a master batch/ additive feeder included. The line was sold to a company in Lituania from its earlier owner in the UK in 2022 , but the plastic feedstock thought to be available in Lithuania never materialised. The line has been stored since, and is still dismantled and able to be shipped immediately to a new buyer. Bledpfx Aszwhtdjbtel

Year of construction: 2009, condition: used, Used Baker Perkins model MP24PH 40:1 L/D twin screw extruder. - Manufacturer: Baker Perkins - Model: MP24PH 40:1 L/D - Number of screw: Twin Screw Extruder - Rotations: co-rotating - Screw speed range: 0 - 600 rpm - Motor power: 11.2.5 kW, variable speed Barrel: - Maximum operationg temperature: 200°C - Nominal barrel lenght: 40:1 L/D - Barrel type: one piece horizontally split clamshell barrel - Heating: electrically heated via cartrige type heaters - Cooling: water-cooled via cored barrel backing block Includes: - Touch HMI integrated in switchboard - Single screw powder feeder - Liquid feed system - liquid hopper, gear pump and flow meter Bsdpszvn Dajfx Abtsll

Year of construction: 1998, operating hours: 64,082 h, condition: good (used), This Cincinnati extruder is currently in storage at Plastima Used Machinery. The machine was manufactured in 1998. Blodpfjzu Nnqox Abtsl – Brand: Cincinnati – Model: Titan 45R-APC – Year of manufacture: 1998 – Conical twin-screw extruder – Screw diameter: 45 mm – Operating hours: 64,082

Condition: good (used), Year of construction: 1991, Brand: Hans Weber GmbH Model: DS 120 Year of manufacture: 1991 Bledpfozu Nl Ajx Abtsl Screw diameter: 120 mm • One pair of original WEBER screws (in excellent condition, including measurement report) • One pair of non-original screws • Gearbox inspected and partially overhauled by WEBER • Control system upgraded to WPS control • Output on PVC approximately 700 kg/hour

Year of construction: 1993, operating hours: 2,466 h, condition: used, Brand: Leistritz AG Model: Micro 27/40 D Screw type: Twin screw Year of manufacture: 1993 Bjdpozu Nk Ssfx Abtjll Screw diameter: 27 mm L/D ratio: 40 Operating hours: 2,466

Year of construction: 1986, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 530, Industrial Double-Drum Winder W04 – Winding Machine For sale: industrial W04 winding machine designed for winding flexible plastic products, profiles, tubes, cords, strips, or similar continuously extruded materials. The machine was previously used in production as part of an extrusion line. Basic information: Machine type: industrial winding machine Designation: W04 Year of manufacture: 1986 Double-drum design Drum 1 / Stop / Drum 2 / Reset controls Emergency stop button Traverse mechanism for even material distribution Adjustable operation Electrical control cabinet IMO iSmart controller Lenze frequency inverter 24 V power supply Mounted on a mobile steel frame This is an older, robust industrial machine. The electrical system has been upgraded during its service life. Condition and equipment are shown in the photos. Suitable for further use in production, refurbishment, or as a base for a custom winding application. Location: Ivanka pri Nitre, Slovakia Bedpfezu Nf Aex Abtoll Price: €3,000 For further information or additional photos, please contact me via message.

Condition: used, Battenfeld BEX-1-150-32-D-V / BEX 45-25E / 89-9436-3201 extruder machine. Manufacturer: Battenfeld-cincinnati Germany GmbH. Year of manufacture: 1999 Year of installation: 1999 Rated voltage: … V Maximum current consumption: … A Frequency: 50 Hz Required pressure: 6 bar Total weight: … kg Noise level: … dB Hydraulic pressure for the screen changer: Extrusion material output: 1000-1200 kg (filter-limited output: approx. 850 kg) Bsdpfjzump Esx Abtsll Possible thickness: 1 – 5 mm Maximum width: approx. 1450-1480 mm Machine dimensions: as described in the layout. Battenfeld BEX-1-150-32-D-V / BEX 45-25E / 89-9436-3201 extruder machine Consisting of: Screw and barrel assembly, motor and drive system, control interface, and supporting auxiliary systems for feeding, thermal regulation, and downstream processing. Details: Feed station - 2x silos. 2 x metal separators - Degacan HE degassing elements, co-extruder Type BEX-1-150-32-D-V and BEX 45-25E / 89-9436-320 to produce sheets or coils. Main extruder composed of 7 heating zones and one vacuum zone. Co-extruder composed of 3 heating/cooling zones to control the polymer. Followed by 3 calenders with temperature controllers. Extrusion die - To be confirmed if included. Calender line setup. Betacontrol Mk1 thickness measuring system. Radioactive source has been removed. Calvatron corona treatment system. Kalvar Calvtron automatic coil changing system. Rollers and calibration table. End-of-line sheet separation and side cutting (slitting) machine. BC touch control interface. Full workshop manuals.

Year of construction: 2002, operating hours: 1,378 h, condition: good (used), Brand: Berstorff Type: ZE 25 compounding line Serial no.: 90200771-0010/2002 Year of manufacturing: 2002 Operating hours: 1,378 Screw diameter: 25 mm Screw L/D: 44 Dimensions (LxWxH): 4,500 x 1,200 x 2,200 mm Blsdpfxezuk Tno Abtjl Weight: 1,350 kg Line configuration: – 1x gravimetric powder feeding system from Brabender – 1x vent port for degassing, including vacuum pump – Filament die with 6 cavities – Cooling roll with tempering unit – Pelletizer with adjustable speed – Central control cabinet Other: All documentation available in German The machine was originally used for biomaterials

Condition: good (used), Year of construction: 2013, screw diameter: 38 mm, Brand: Krauss Maffei Technologies GmbH Model: KME 38-30 Screw type: Single screw Year of manufacture: 2013 Screw diameter: 38 mm L/D ratio: 30 It is supplied without a screw and is in very good condition; the machine was never used in production. Bljdpfx Ajzuk Irjbtsl

Condition: good (used), Year of construction: 1989, operating hours: 24,048 h, Brand: Hans Weber Maschinenfabrik GmbH Type: DS 8.7 Serial number: DS 85 777 Blodpfx Abezuk Hbjtol Type: Double screw extruder Year of manufacture: 1989 Operating hours: 24,048 h Screw diameter: 87 mm Connected load: 90 kW

Condition: refurbished (used), Year of construction: 2002, functionality: fully functional, screw diameter: 172 mm, rotational speed (max.): 49 rpm, In recent years, over €420,000 have been invested in new components and factory refurbishments! Further technical details can be found in the attached documentation. TECHNICAL DETAILS Screw diameter: 172 mm Screw speed: 4.9 - 49 rpm Max. torque: 17,500 Nm MACHINE DETAILS Main motor: 216 kW Gearbox manufacturer: P.I.V Coperion DSE 180 TECHNICAL DETAILS Power: 7.5 kW Output torque: 280 Nm Degassing chamber: 1 Screw housing bore: Ø 181.5 mm Screw diameter: 180 mm Pressure build-up (axial pressure on the screw shaft): max. 25 bar EQUIPMENT Double screw degassing unit Coperion DSE 180, year 2021 Main gearbox P.I.V, year 2002, factory refurbished in 2021, unused Bjdsztu Dbjpfx Abtsll Main gearbox P.I.V, year 1986, factory refurbished in 2016, in operation 2021 - 2023 Main motors Siemens, 212 kW, year 2002, factory refurbished in 2020, unused Main motors Siemens, 212 kW, year 1986, factory refurbished in 2015, in operation 2020 - 2023 Screw housings, 16 various, new and used Screw shafts, 2 x approx. 4,600 mm Supports Screw tips Thrust discs Note: The electrical and control technology as well as the screw segments are not included in the scope of delivery.

Condition: good (used), Year of construction: 2004, Twin-screw extruder, Krauss Maffei KMD63 model, for sale. The extruder is fully functional. The screws have been removed and can be inspected on site. Bodpjzr N Ursfx Abtsll - Year of manufacture: 2004 - C4 control system - The price applies to the extruder only, excluding any follow-up services. Loading, export documents, delivery, etc. can be arranged upon request. Please feel free to contact us if you have any questions.

Condition: ready for operation (used), functionality: fully functional, screw diameter: 200 mm, No minimum price – guaranteed sale to the highest bidder! Granulation of temperature- and shear-sensitive plastics Suitable for soft PVC Suitable for hard PVC Suitable for HFFR formulations Suitable for elastomer compounds for low, medium and high voltage cables TECHNICAL DETAILS Screw diameter: 200 mm Length from feed to end: approx. 1,100 mm L/D ratio: approx. 5.5 : 1 Bledozr H Ebopfx Abtsl MACHINE DETAILS Drive power: 72.5 kW Overall machine length: approx. 2,500 mm Feed height: approx. 1,000 mm EQUIPMENT Eccentric granulation EGR Degassing zone Can be used as a single-screw extruder for various processing applications

Year of construction: 2024, operating hours: 10 h, condition: ready for operation (used), functionality: fully functional, screw conveyor diameter: 145 mm, TECHNICAL DETAILS Throughput (depending on material, bulk density, and recipe): 200 - 300 kg/h Extruder type: Single-screw extruder / melt extruder Screw diameter: 145 mm Heating: Induction heating Heating processing temperature: over 300°C possible MACHINE DETAILS Drive Drive power: 45 kW Voltage: 380 V Frequency: 50 Hz Rated current: 84.2 A Speed: 1,480 rpm Protection class: IP55 Insulation class: F Operating mode: S1 – continuous operation Sound level: 71 dB(A) Year of drive manufacture: 2022 Bjdezr Hz Aspfx Abtsll Star/delta connection possible Suitable plastics: LDPE, HDPE, PP Suitable materials: Ground material, EPS, film scraps, ground film, and light plastic waste Material feed: Suitable for materials with low bulk density Operating hours: 10 h EQUIPMENT Metering device Hopper for material feed Large filter / screen changer Adapted die

Condition: used, functionality: unexamined, Pair of screws for extruder Weber DS-63, parallel Manufacturer: Hans Weber Maschinenfabrik GmbH Bjdpfxszrt Ene Abtsll Type: DS 63 Serial no.: 063.008271.r.1004 Screw diameter: 2 x 63 mm Screw length: 17 x D Condition: used

Condition: good (used), Extrusion tool accessories, extruder -Manufacturer: JC Times USEON, Extrusion Tooling Accessories -Type: unfortunately without type designations -Perforated plates: 3 pieces 1940/210/H60 mm -Individual components: see photos -Price/Fee: complete -Transport dimensions: 3150/1095/H1790 mm / 2050/300/H900 mm -Weight: 2510 kg / 560 kg Bedpfxozpwcxe Abtoll

Condition: used, Cincinnati Proton 60LD30 single-screw extruders, in good working condition, ready for operation. Blodozpd Uuepfx Abtsl

Year of construction: 1999, operating hours: 47,973 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 20472666, Complete compounding and granulation system based on a co-rotating twin-screw extruder, Krupp Werner & Pfleiderer ZSK 50, manufactured in 1999. The system is suitable for compounding, processing, and regranulating thermoplastic materials. Previous process: ABS recycling The system consists of: Twin-screw extruder ZSK 50 Mc 900 with a process length of 36 L/D Drive power: 181 kW Screw speed: up to 1200 rpm including water ring vacuum pump and water cooling including Autotherm temperature control unit including strand die head Bjdpfx Abjzn Um Eetsll Multi-component dosing and material feeding system from Colortronic - Graviblend (manufactured in 1999), gravimetric, with 5 gravimetric feeders, including vacuum material conveying with Busch vacuum pump, type RC 0160, suction via suction lances Downstream: Ettlinger melt filter, type ERF 200 with 1250 cm² filter area for up to 900 kg/h Water bath, 4.0 m, including heat exchanger Granulate air blower Scheer strand granulator SGS 200-E5, manufactured in 2011 Classification vibration screen Cooling screw conveyor Control cabinets included. The system is currently still assembled and can be inspected under power until the end of September.

Year of construction: 2022, condition: excellent (used), functionality: fully functional, We offer this very good PMH (Plasticmaschinen handelsgesellschaft) PMH DS25-32LD twin-screw extruder, year of manufacture 2022. Manufacturer: PMH Plasticmaschinen handelsgesellschaft Model: PMH DS25-32LD twin-screw extruder Year of manufacture: 2022 Condition: very good Category ID: 452 Type: PMH twin screw extruder PMH Compounder DS25-32LD, with co-rotating, segmented twin screws ("good as new") The machine is designed with an 11 kW three-phase drive and a distribution gearbox for 95 Nm at 400 rpm. The mounted safety coupling is combined with a cut-off contact in case of overload. The maximum permissible melt pressure is 150 bar and is monitored by a pressure sensor. Individual housings allow you to configure the machine flexibly according to your requirements. The segmented screws with a diameter of 25 mm are designed in the standard version with several kneading zones and a decompression zone (atmospheric degassing). A blind cover for the decompression zone is included in the scope of delivery. Ceramic heaters with thermal sensors and cooling fans control the temperature. A stainless steel funnel is mounted on the filling opening. The electrical control system is integrated into the machine frame. All heating zones are switched contactlessly via solid-state relays. A swivelling touch panel is available for user-friendly operation. The head plate is equipped with a mass pressure sensor. The mass pressure monitoring system switches off the drive when the set maximum mass pressure is exceeded. Bljdpfx Aoznkx Djbtsl tool adapter with 4-hole nozzle plate Options: Vacuum pump for the degassing zone (only atmospheric degassing offered) 3 metre water bath Air-Knife Used strand granulator If you have any questions or need more information, feel free to send us a message or give us a call.

Year of construction: 2000, operating hours: 811 h, condition: used, functionality: fully functional, machine/vehicle number: 292, IDE--o/c 182836 Bodpjzmnp Rofx Abtsll - DC-drive 8,5 kW / screw Speed max. 50 rpm - 1-part cylinder, smooth - 1x flange heating zone - 2x die heating zones - die connection IDE M70x2