Used Finger jointing lines for sale (64)

Condition: good (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: PWFJ-2018-001-006, Weight: 5000 kg Power: 32 kW Air pressure: 6 BAR Dimensions (LxHxW): Approx. 18,000 x 2000 x 1600 mm Mill diameter: 125 mm Saw blade diameter: 450 mm Extraction port diameter: 1x200/2x120 mm/1x80 mm Air extraction speed: 30 m/sec Pressing force: Adjustable up to max. 14,000 kg Lengths: 450 – 6000+ mm Widths: 50 – 300 mm Gedsxm U Erjpfx Aabskc Thicknesses: 8 – 50 mm Capacity: Up to 8 joints/min Length modes: Variable / Fixed / Optimizing round lengths

Condition: used, Year of construction: 1997, Dimter Profi Joint 600 KD Finger Jointing Line The line's throughput was 2.5 boards per minute. Board dimensions: L = 900 mm, H = 180 mm, and W = 600 mm. If the maximum volume of one full board is 0.081 m³ x 2.5 = ~0.2 m³, the material can be loaded into the machine in one minute. However, this directly depends on the size of the loaded raw material. Linear meters: We processed 10,000–12,000 meters in an 8-hour shift. Using raw material 24 mm thick and 98 mm wide. The length of the raw material ranged from 200 to 60 m. Gedjxmvxyspfx Aabekc dismantled

Condition: like new (used), Year of construction: 2004, HYDRAULIC PRESS FOR GLUING WOODEN ELEMENTS TO THE THICKNESS OF HSKG Category: VI - Hydraulic presses for gluing wooden parts. The HSKG device is used for gluing wooden cut-thickness parts under high pressure of hydraulic cylinders. The range of achievable crushing forces per cylinder is 5-11kN (horizontal) and 25-55kN (vertical). The gluing of elements is carried out in a stack with the dimensions of the loading field. Stack forming is carried out by hydraulic compression between the sliding vertical beams and the vertical slats of the transverse cylinders. Both stack forming elements are equipped with wooden or metal inserts corresponding to the profile of the slat stack. Gluing wooden elements from the thickness improves the quality of the frames, reduces the cost of machining, reduces the amount of wood waste. Technical and operational data ( of standard execution HSKG - 6m ) Number of loading fields pcs 4 Dimensions of a single loading field - loading height - length of slats in one field mm mm 1140 1530 Gkjdpfetrl R Asx Aabec Maximum width of slats mm 150 Maximum length of glued elements mm 3120 Installed power kW 3 Electricity supply V AC 3/N/PE, 400V 50Hz Control voltage V DC 24 Number of actuators on one field: mm mm O 50x100 - 3 pcs. O 80x100 - 3 pcs. External dimensions (L x W x H) mm 8120x1000x2300 Weight of the device kg 4800 At the request of the customer, we also make other configurations of pressure actuators control depending on the expected length of glued elements, as well as other lengths of individual working fields in different quantities in the whole press set, and working width of up to 220 mm maximum with increased pressure force.

Condition: new, Year of construction: 2023, Line for joining wooden elements to length, type PDFE (full-automatic double-milling machine version) - milling package width 650 mm - length of connected elements 190 – 800 mm - width of joined elements 30 – 150 mm - thickness of joined elements 20 – 60 mm - adhesive contact elements made of stainless steel - package alignment option in milling machines (laser sensor) - buffer table equipped with a mechanism for turning over elements (brush) - a claw dropping elements onto a chain conveyor controlled by a servo drive Gkodjpy Eb Uspfx Aabec - working length of the press 4500 mm - chain conveyor PTŁŁ 3500 mm - line and zigzag connections - central control on Mitsubishi components

Condition: reconditioned (used), functionality: fully functional, Milling motor dimter for finger joint milling machine HK200 and HK400 Godpfxem Sgvzs Aabjkc 50 kW

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, feed length X-axis: 13,000 mm, feed length Y-axis: 240 mm, feed length Z-axis: 100 mm, feed rate X-axis: 25 m/min, pressing force: 40 t, input voltage: 400 V, total height: 1,120 mm, working height: 1,120 mm, milling spindle length: 330 mm, control voltage: 400 V, workpiece height (max.): 100 mm, tool diameter: 240 mm, rotational speed (max.): 6,000 rpm, air pressure: 7 bar, total length of planing tables: 13,000 mm, We offer a fully automated production line for the manufacturing of KVH and BSH structural timber. The line is fully certified for CE and by the Wood Technology Institute in Poznań, in accordance with standards ENPN 14.081 and 14.081. 1. Inclined discharge conveyor 2. Feed table for visual timber grading 3. Buffer before the defect cutter 4. Automatic defect cutter with fluorescent chalk camera 5. Buffer before the finger jointing machine 6. Finger jointing machine with glue applicator and saw for cutting to a specified length up to 13 m 7. Chain storage conveyor from the gluing machine to the planer 8. Automatic infeed unit for the four-sided planer 9. Four-sided planer Winter 6-33 10. Roller receiver collecting from the four-sided planer 11. Automatic packaging machine for planed timber 12. Chain feeder 13. Polyurethane glue applicator 14. BSH press, 12 meters long, width 240 mm x height 1120 mm 15. Stretch film wrapper Gjdpjxfzyyjfx Aabekc

Condition: refurbished (used), Year of construction: 2007, The line for joining PDFD in the single-milling version consists of two main devices: the DFC 60M milling-tenoner (where the ends of the battens are machined) and the PHSL longitudinal press, where the elements are joined into a batten up to 6.6 meters long. Width of input package for milling-tenoner – 650 mm Width of glued elements – 30 ÷ 155 mm Length of glued elements – 170 ÷ 900 mm Thickness of glued elements – 20 ÷ 70 mm Compressed air requirement 18 m³/h Operating capacity – cycles/min. approx. 2 (batten 6600) Length of glued element – up to 6600 mm Gkedpfew Hrm Nox Aaboc The machine is in excellent technical condition!!

Condition: excellent (used), FAMAD PDFD-I Wood Jointing Line 1. FAMAD DFC-60M Milling and Tenoning Machine Unit Input element length 170-900mm Milling height 20-155mm Gsdpfx Aow Iy Nysabjkc Milled element package width 650mm Carriage operating speed: Work 10-23m/min Return 32m/min 2. PHSL Pressing Unit Glued element width 35-155mm Glued element thickness 20-70mm Glued element length min/max 4500-6600mm Possibility of programming inter-cuts Line capacity up to 4000mb/shift 3. General information Length 15700mm Width 3350mm Power demand 48kw Year of production 2006 Very good condition

Condition: used, Year of construction: 2004, SECOND-HAND FINGER JOINTING LINE WEINIG GRECON PROFI JOINT MOD. PJ 150/500 - CE - Wood entry length 150 - 700 - Wood width 40 - 150 mm - Wood thickness 18 - 80 mm - Wood exit length 3,000 - 6,100 - Press length 6100mm - Press force 105 kN - Milling unit motor 15Kw - Scoring unit 5.5Kw Gksdjwry I Eopfx Aaboc - Year 2004 CE

Condition: good (used), Type FEr LD 180/600/1000 Gkjdpfxeuhtmij Aaboc 100% operational, automatic rotation

Condition: reconditioned (used), Year of construction: 1998, Fully automatic package jointing line 500 mm Packaging width - Consisting of: - Finger jointing Central Milling Machine - 2 fixed transport tables - 1 Wheeled processing unit - 2 milling spindles - 2 flakers - Glue - Separating station with tilt-back - Threading section 2 transport chains - Feed with double rollers - Extrusion press 12 ton - crosscut - Packaging width 500 mm Gkjdolatv Aopfx Aaboc - wood in max. 1950 mm - wood in min. 200 mm - Workpiece 50-215 mm - Workpiece thickness of 25 to 100 mm - Performance 2,5- 3 tables / min - Press force max. 12000 kp - Length of the threading section 3900 mm - Lenght of the press bed 5000 mm - wood with fingerjoint endless - Engine performance milling spindle 2x18,5 kW - Engine chipper 2x 7.5 kW

Condition: good (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: V001257, Profi-Joint Shaper 6000mm two stage press Includes PUR glue pump and applicator Gsdpfxsv Ryb Re Aabekc Additional consideration: Sawdust extraction (A$20,000)

Condition: new, Year of construction: 2025, pressing force: 25 t, Equipment: double-sided, The Marinus Powermax Finger Jointer Line profiles horizontally, applies adhesive, cuts out defects, presses and cuts to length. The unique process creates a clean joint that does not require post-processing. About the Finger Jointer When feeding wood into the machine, it is possible to mark defects, such as knots or cracks, with a luminescent crayon. The machine will cut out these defects, including the crayon lines. For instance, to get cladding or paneling without knots or holes. Before the profiling and also before the pressing, the wood is brought to a stationary position, fixed sideways and clamped to an accurate reference surface above. This results in a highly accurate connection of the finger joint, with a flat surface at the joint and a straight end-product. Because of this precision (for most purposes) the wood does not need to be planed or sanded afterwards. The adhesive applicator is mounted to the carriage with the profile cutters. In the returning stroke of the profiling carriage the adhesive is applied. The use of PU adhesive ensures a very strong bond, suitable for outdoor use and in wet environments. While most other finger jointers move the wood transversely (right-angled) past the profiling heads, the Marinus Finger Jointer moves the wood longitudinally (lengthwise) through the machine. This enables feeding in long lengths of 6 meters or even longer. As a result, the machine can process all the wood, including longer lengths, and use it all (except for the defects) for the jointed end-product. This way, there is no good wood turned into short pieces of scrap. Where other finger jointers focus on re-using short pieces of scrap wood, the Marinus eliminates the production of scrap wood. The Marinus Finger Jointer contributes to an efficient and sustainable production process. Specifications: Infeed Lenghts: 450 - 6000+ mm Infeed Widths: 50 - 300 mm Infeed Thicknesses: 8 - 50 mm Length modes: Variable / Fixed Capacity: Up to 8 joints/min This machinery is engineered and built in our company in The Netherlands and will be delivered new from our factory. This machinery is equipped with an online remote support system. We provide customer support worldwide. Gkedjp R Iwhspfx Aabjc This listing on Machineseeker is also made by us: Marinus Machinery.

Condition: excellent (used), Wood finger jointing line Grecon Profijoint Grecon Profijoint Material length at infeed: 150-700 mm Material width: 40-150 mm Wood thickness: 18-50 mm Single-end tenoning machine Gedjw Ilryjpfx Aabskc Possibility of line milling Milling spindle power: 15 kW Power of the chipping/scoring spindle: 11 kW CE certificate

Year of construction: 2008, condition: used, SECOND-HAND FINGER JOINTING LINE WEINIG GRECON PROFI JOINT MOD. PJ 10/6100 - CE - Min/max length of raw material 150-700 mm Gksdpfxepbbnxj Aaboc - Min/max working thickness 18 – 50 mm - Min/max working width 40 - 170 mm * MILLING UNIT: - N. 2 scoring blades diam. 200 mm (11 kw) - Trimming unit diam. 250mm (7.5 kw) - Milling unit diam. 250mm (22 kw) * PRESS UNIT - Min. 3000 max. 6100mm - Hydraulic unit motor 4.4kw - Cutting unit motor 2.2kw - Volt. 400/50 - Overall dimensions 13000x5000x2100h - Year 2008

Condition: used, Year of construction: 2004, Compact semi-automatic finger jointing line consisting of: - PJ 150/500 milling machine - Transfer table for manual transfer - PJ 7/6100 li single-channel press milling machine: 2 packages / min Press: 2 beats / min Input length: 150 – 700 mm Final length: max. 6,100 mm Gksdpfx Aow Nbacsabec

Condition: repair required (used), Finger-jointing line Dimter HK 400 Finger-jointing machine Wood infeed lengths: 800-6000 mm Color: blue Needs repair, sold as is The plant has already been dismantled and is stored at the Jöma warehouse Gksdpfxjvi Hw Ne Aabjc A lot of material for little money All technical documentation available We will also provide you with technical support

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, Grecon Ultra microstrip line - German production Gjdsrf Ty Sspfx Aabskc - year of production 2001 - for soft and hard wood - DTR TECHNICAL PARAMETERS: length of elements min/max 150/1000 mm width of elements min/max 40/205 mm height min/max 20x80 ratio min length / max width 2:1 initial length min/max 3000/6100 mm power of disc engine 5,5 kW blade spindle diameter 30 mm milling cutter motor power 22 kW spindle diameter 50 mm total length 11500 mm width 5300 mm total power consumption 39 kW air pressure 8 bar air consumption 660 NL/min nozzle diameter 250 and 100 mm extraction demand 6150 m3/h 30m/s transport dimensions 1300 cm x 220 cm x 200 cm weight 6700 kg

Condition: excellent (used), Year of construction: 2011, Famad HSKG 6m frame press Technical data: Gkodpfx Aasukg Dzobec Maximum workpiece dimensions: length up to 6050 mm, width up to 160 mm Total weight of the machine: 4800 kg

Condition: used, Year of construction: 1995, functionality: fully functional, We will be selling our finger jointing line at the end of 2025/beginning of 2026, starting from the vacuum destacker (photo 1) up to the finger joint press including the cross-cut saw (photo 11), with only the defect cross-cut saw not for sale. Finger jointing line, model HK 250 L, year 1995 (see photo 7), with upgrades in 2013: control system and finger joint press were replaced. Glue application is performed using the bottom-mixing method with glue rollers (see photo 6). Gksdpfjw Uf Tkjx Aaboc The control system for the entire line and the press was renewed by Somako. Production with this line will continue until the end of 2025, therefore it can be inspected in operation at any time. The price depends on whether the entire line or only parts of it are purchased. Individual components can also be sold as spare parts.

Condition: good (used), Year of construction: 2010, functionality: fully functional, Keilzinken Milling Machine WEINIG NKT Doppel-Pack DP20 An industrial finger jointing system - designed for maximum precision and efficiency Technical Specifications: - Wood infeed length: min. 130 mm | max. 1000 mm - Wood outfeed length: min. 3700 mm | max. 7400 mm - Wood cross-section: min. 20 x 40 mm | max. 80 x 180 mm - Cutter diameter: 370 mm - Finger joint profile: Vertical / Horizontal, 10/11 fingers, 3.8 mm pitch - Glue application: Double-sided, PVAC white glue - Connected load: 80 kW Note: Gjdpfow Stkfex Aabokc The machine is currently dismantled and in stock at our premises. Inspection can be arranged by appointment. Scope of supply: - WEINIG NKT Doppel-Pack DP20 incl. control unit - Integrated glue station for double-sided application - Operating manual & documentation

Year of construction: 2010, condition: good (used), Weinig GRECON TURBO S finger jointing line - German production - DTR, CE - year of manufacture 2010 - high efficiency up to 200 elements / min - 28 km / 8h TECHNICAL PARAMETERS: Wood parameters - width 60 - 225 mm - thickness 18 - 48 mm - length 300 - 2000 mm - pressing length 8100 - 16400 mm - power consumption 150 kW - air consumption 3100 Nl/min - suction capacity 14845 m3/h - two milling stations - undercutters - connecting with a dash and a zigzag - loading with a conveyor with spacers - package width 600 mm - divided ironing length Folded machine dimensions - length 42000 mm - width 6000mm - height 2100 mm Gkjdpfx Aoin Uuljabjc

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, The Grecon Combipact wood joining line, year of manufacture 2009, is an advanced system used in the woodworking industry, primarily for joining short lengths of wood into longer pieces using finger jointing. Thanks to this process, it is possible to use wood waste to produce full-value structural elements, such as in beams, scantlings and panels. Technical data: 1. initial length of the elements: - Minimum length: 150 mm - Maximum length: 1000 mm 2 Width of elements: - Minimum width: about 20-40 mm. - Maximum width: about 200 mm. 3. thickness of elements: - Minimum thickness: about 15-20 mm. - Maximum thickness: about 80 mm. 4. Final length after jointing: - Standard maximum length after jointing: from 6000 mm. 5 Capacity: - The production capacity is usually 5 to 15 joints per minute, which gives the ability to process up to 3000 mb/hour. 6. joint type: Gjdouiz I Ropfx Aabekc - Finger jointing, which is made with high precision, providing a durable and strong connection. 7. Press pressure: - Typically, a hydraulic press applies a pressure of several to several tons to effectively join the parts. 8 Control: - A PLC control system that provides process automation with the ability to set various parameters for joining wood. 9 Gluing: - Grecon Combipact lines are equipped with automated glue application systems that precisely dispense the correct amount of bonding agent. 10. power supply: - Standard power supply: 400 V, 50 Hz

Condition: good (used), Year of construction: 2002, functionality: fully functional, GOMA FC -10 KZ6 finger jointing wood joining line Polish production year of production 2002 DTR with declaration of conformity Gksdpot Sfz Ijfx Aabjc TECHNICAL PARAMETERS: wood width min / max - 40 / 160 mm thickness of wood min / max - 25 / 80 mm length of a single glued section 6000 mm compression force 7500 kG / 100 atm SAW saw blade diameter 300 mm motor power 6 kW milling machine power 15 kW PRESS hydraulic pump power 4 kW working pressure 100 bar

Condition: reconditioned (used), Year of construction: 2007, Available Immediately: Semi-Automatic Line for Finger-Jointing Wooden Elements Up to 6 Meters in Length The line has undergone a complete overhaul. The finger jointer is equipped with a table featuring a conveyor belt and an additional rotary table. This setup simplifies and speeds up machine operation, thereby increasing efficiency. A new glue nozzle for automatic glue application and a new saw-chipper are included. The press has a fixed jointing length of 6 meters. Finger Jointer Technical Specifications: • Spindle diameter: 50 x 210 mm • Spindle speed: 5,500 rpm • Motor: 15 kW • Tool dimensions: 250 x 150 mm Gksdstyy Exspfx Aaboc • Special chipper: 300 x 8 mm • Motor: 6 kW / 3,000 rpm • Infinitely variable feed table • Working width x height: 600 x 30 x 150 mm Hydraulic Press: • Working length: 6 meters • Lamella width up to 160 mm, thickness up to 80 mm, gluing length per cycle: 6,000 mm • Number of pneumatic pistons: 4 (2 from above, 2 from below) • Air pressure: 5–8 bar • Air consumption: 300 l/cycle • Saw blade diameter: 300 mm • Spindle diameter: 30 mm • Motor power: 1.5 kW • Saw movement: pneumatic Dimensions (L x W x H): 7,700 x 1,160 x 1,500 mm Weight: 1,500 kg Optional services for an additional fee: installation, commissioning, and training on machine operation.