Used Zl 502 for sale (924)

Condition: like new (used), Steel constructions – 2.50 PLN per kg Lodpey H Eu Tofx Abyehh

Condition: new, Screw gear RTP 502-000-8 GROB Ledpfxjzd Ny Sj Abyshh 40:23 240/01 00000 Screw gear GROB RTP 502-000-8 Manufacturer: GROB Antriebstechnik Type: RTP 502-000-8 Design: Screw gear Drawing number: 90010016737 Packaging: Wooden crate Condition: unused, packaged

Condition: used, Year of construction: 1974, table diameter mm Ljdpfx Abeub Alzoyehh workpiece height mm number of wheels 2 total power requirement 8 kW weight of the machine ca. 4,2 t dimensions of the machine ca. m

Condition: used, Year of construction: 1975, table diameter mm workpiece height mm number of wheels 2 total power requirement 11 kW weight of the machine ca. 4,2 t Ljdpfxjub Al Ie Abyohh dimensions of the machine ca. m

Condition: good (used), Pump performance data: Flow rate 262 l/min, operating pressure 1040 bar, motor speed 1800 rpm, crankshaft speed 465 rpm, piston diameter 50 mm, required motor power 497 kW. Diesel engine: Manufacturer Volvo, type TAD 1643 VE-B Stage II / Tier 2, engine number 2016121993, voltage 24 V, power output 565 kW, speed 1800 rpm, idle speed 900 rpm. WITHOUT truck; the truck is not for sale. Lodpfx Abozf Rqbsyohh Year of manufacture 2020.

Condition: used, Year of construction: 2008, band width 6 - 13 mm table-size 850 x 560 mm Lhjdpfx Aozcgauobyjh work height max. ~ 780 mm connected load frequency 230 V Transpak TP-502 semi-automatic strapping machine for fast and secure strapping of cartons, packages, and general cargo with plastic strapping. The machine automatically seals and tightens the strapping band and is suitable for efficient use in shipping departments, warehouses, and packaging areas (strapping band included).

Condition: excellent (used), Year of construction: 2023, operating hours: 450 h, functionality: fully functional, machine/vehicle number: 1589 / 1590, saw blade diameter: 500 mm, Fully automatic sawing and punching machine for aluminium and plastic profiles The Profilma 502 ST-V combines precise sawing and punching in a continuous, automated workflow. Based on the proven Profilma 502 model, this machine is ideally suited for high-volume production, complex processing tasks, and the machining of bundle materials. Control is provided via a Siemens S7 system with touch display, piece counter, cycle time display, and integrated error diagnostics. An IXON router enables secure remote access via VPN. Up to 10 punching dimensions can be programmed per job. Sawing range & feed: - 500–550 mm saw blades - Saw drive: 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm - Infinitely variable speed adjustment - Saw cut from below, powered feed - Material feed: 3–800 mm, reverse feeding up to 4,000 mm - Ball screw spindle with servo drive and round guide rails - Residual piece: from 75 mm (sawing mode), from 80 mm (punching/sawing mode)* Punching unit: - Vertical hydraulic punch (output side) with automatic oil cooling - Punching force: 300 kN - Stroke: 20 mm - Double stroke cycle time: 2 - 3 seconds - Punch slug ejection into the machine frame - Conveyor belt 250 × 800 mm for parts removal Equipment: - 2 pneumatic clamping cylinders (vertical, pressure-reduced) - 3 chip extraction ports Ø 100 mm, potential-free contact for extraction control system - Minimum quantity spray unit with two 3-litre tanks and fill level display - Noise protection package: enclosure and saw guard internally insulated - Roller conveyor (740 mm) with reach-in protection on the infeed side - Sturdy stationary machine frame, working height: 960 mm - Manually operated safety cover - Saw blade housing located below the table surface Max. cutting range: - Profile height: up to 65 mm - Profile width: up to 170 mm Technical data: - Dimensions (W × D × H): approx. 311 × 153 × 197 cm - 2 machines available ----- Attractive offer – flexible & worry-free We not only provide you with a high-quality product, but also offer customised financing solutions tailored to your needs. Whether down payment, instalment payment, or individual financing models – together, we will find the right option for you. If desired, we can also take care of the entire transport logistics. From planning through to reliable delivery, we ensure a smooth and punctual process so you do not need to worry about anything. 📞 Please feel free to contact us for more information or a non-binding quotation. We will provide you with professional and personal advice. Subject to prior sale, modifications, and errors! Ledpfsyyz Ebox Abyjhh

Condition: excellent (used), Year of construction: 2023, operating hours: 67 h, functionality: fully functional, machine/vehicle number: 1591 / 1592, saw blade diameter: 500 mm, Fully Automatic Sawing and Punching Machine for Aluminum and Plastic Profiles The Profilma 502 ST - HV combines precise sawing and flexible punching in a fully automatic process. Based on the Profilma 502 model, it is specifically optimized for high-volume applications and combined processing operations – including the handling of entire profile layers. Control is provided via a Siemens S7 system with touch display, piece counter, cycle time display, and integrated fault diagnosis. An IXON router allows for secure remote access via VPN. Up to 10 punching dimensions can be programmed per order. The horizontal punching unit can be deactivated if required. Ljdpsyyzxhefx Abyshh Sawing Area & Feed: - 500–550 mm saw blades - Saw drive: 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm - Infinitely variable speed control - Saw cuts from below, with motorized feed - Material feed: 3–800 mm, reversible up to 4,000 mm - Ball screw spindle with servo drive and round guide shafts - Remnant length: from 75 mm (saw mode), from 80 mm (punch/saw mode)* Punching Unit: - Vertical and horizontal hydraulic punching (on discharge side) with automatic oil cooler - Punching force: 2 × 150 kN - Stroke: ≤ 20 mm - Vertical stroke infinitely adjustable (also suitable for embossing) - Horizontal punching cylinder can be switched off separately - Double stroke cycle time: 2x 2–3 seconds - Punch scrap is discharged sideways from the machine frame - 250 × 800 mm conveyor belt for part discharge Equipment: - 2 pneumatic clamping cylinders (vertical, pressure-reduced) - 3 chip extraction nozzles Ø 100 mm, volt-free contact for extraction control - Minimum quantity lubrication unit with 2x 3-liter tanks and level indicator - Noise protection package: sound-insulated hood and internal saw blade guard - Roller conveyor (740 mm) with reach protection on infeed side - Sturdy stationary frame, working height: 960 mm - Manually opening safety hood - Saw blade housing located under the table Max. Cutting Area: - Profile height: up to 65 mm - Profile width: up to 135 mm Technical Data: - Dimensions (W × D × H): approx. 311 × 153 × 197 cm - Total of 2 units available ----- Attractive Offer – Flexible & Worry-Free We not only offer you a high-quality product but also tailored financing options that suit your needs. Whether down payment, installment plans, or individual financing models – together we will find the right solution. If desired, we can also handle the complete transport organization. From planning to reliable delivery, we ensure a smooth and timely process so you don’t have to worry about a thing. 📞 Contact us for more information or a non-binding quote. We provide you with personal and competent advice. Subject to prior sale, changes, and errors!

Condition: used, Year of construction: 1994, punching force max. 50 t throat 510 mm stroke 32 mm stroke - stepless adjustable 10 - 32 mm no. of strokes 35 bei 10 mm Hub/min Working height 1070 mm Ledpfx Aeyrhyuebyjhh daylight 350 mm table width 255 mm dimensions ca. 1080 x 650 x 1680 mm material layer 630 X 535 weight ca. 1400 kg Scraper, height-adjustable and removable, with interchangeable plate Hydraulic low-pressure finder for foot switch operation Two-stage foot switch and electrical controls Integrated hydraulic unit With punching saddle for dies no. 3, up to Ø 32.5 mm Quick-change device for punches 2 and 5 up to Ø 31.5 mm Peddinghaus blue series with material support table no. 513, dimensions 630 x 535 mm

Condition: ready for operation (used), KEB Brinkmann .502-62B0 engine SN: 16100995, used, good condition, 100% functional, scope of delivery as per photos Lhedpfjv H H Ddjx Abyjh

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,000 kg, maximum load weight: 15,000 kg, overall weight: 18,000 kg, axle configuration: 2 axles, total length: 9,470 mm, total width: 2,550 mm, total height: 1,040 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. *Chassis with swivel turntable Fine-grained steel welded construction Front stop, longitudinally adjustable and foldable 2 pairs of removable guide rollers, front and rear 1 pair of removable guide rollers, additional 4 container locks with sturdy 20"-based arms for swap bodies 7.15 and 7.45 Swivel frame with heavy-duty ball bearing swivel ring Lsdpfx Abszfp Uxoyjhh Wheel chocks with holder Aluminum side impact protection Side impact protection set inward for optimal clearance to the swap body supports Steel underrun protection Underrun protection shortened for optimal clearance to the swap body supports; lighting system mounted in a protected position Rear mud flaps across the entire width (not compatible with forklift mount) Quarter-shell front fenders and half-shell rear fenders *Towing equipment for trailer turntable Towing fork with certified 40 mm tow eye Towing fork mechanically adjustable in length by approx. 6 x 100 mm (approx. 1900–2500 mm), towing fork length set to 2200 mm *Axles + Suspension BPW or SAF drum brake axles, at the manufacturer’s discretion “Laser-aligned axles/chassis” to reduce tire wear and fuel consumption Air suspension *Brake System 2-line compressed air brake system Color-coded piping for easy maintenance. Air reservoir: 180 liters Spring-loaded parking brake 2 non-reversible coupling heads at the front, with connecting lines to the tractor unit, EBS, Electronic Braking System with EBS connector at the front, with connecting cable, Caution: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! With lift/lower valve, hold function in both lower and lift positions Axle load detection via EBS CAN bus signal, for display in the cab; truck must be equipped accordingly *Wheels and Tires 235/75 R17.5, brand selected by the manufacturer Steel rims in twin configuration, factory silver *Electrical System 24 volts, multi-chamber lights, yellow LED side lighting linked to the turn signals (“flashing side lights”), LED license plate lighting (Note: With certain towing vehicles, false diagnostics may occur even though the function is working properly) 2 white LED front position lights 2 white/red LED rear lane-keeping lights 2 x 7-pin reverse-polarity-protected connectors at the front, with connecting cable, LED work lights on both sides (activated via reverse light) 2 additional LED work lights at the rear, activated by the reverse light 1 LED work light at the front, centered between the cross members, shining toward the rear, activated by the reverse light *Country of Registration / License Plates Germany With DEKRA inspection and certification (in accordance with §13 EG - FGV) 24/7 Service Hotline Prepared for single-line license plate holders Contour markings with reflective strips in accordance with ECE R 048, white on the sides and red at the rear *Paint finish Hot-dip galvanized frame, including passivation “15-year warranty against rust-through” Drawbar: galvanized or black, at the manufacturer’s discretion Customized transport solution

Condition: used, Year of construction: 2012, Air cushion machine, Fromm Airpad machine Manufacturer: Brüninghaus Type: AP 502 Year of manufacture: approx. 2012 Film material: PA/PE composite film or Polyethylene film (100% recyclable) Lhjdpfx Abowulyleyjh Compressed air connection: NW 10/4 - 8 bar; max. 82 Nl/min (during cushion production): max. 3.5 Nl/cycle Performance: 25 – 49 cycles/min. (depending on film type and cushion size) Electrical connection: 230 VAC; 50/60 Hz; 16 A; 2.0 kVA Dimensions: (L x W x H) 1,600 x 767 x 1,292 mm Weight: 230 kg Accessories / Special equipment: • Stored programs for different cushion sizes • Program change is done at the push of a button • From 4 cm to 16 cm in length can be individually produced with a defined filling level • 10 programs are available for storing multiple parameters 24626

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,000 kg, maximum load weight: 15,000 kg, overall weight: 18,000 kg, axle configuration: 2 axles, total length: 9,470 mm, total width: 2,550 mm, total height: 1,040 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. *Chassis with swivel turntable Fine-grained steel welded construction Front stop, longitudinally adjustable and foldable 2 pairs of removable guide rollers, front and rear 1 pair of removable guide rollers, additional 4 container locks with sturdy 20"-based arms for swap bodies 7.15 and 7.45 Swivel frame with heavy-duty ball bearing swivel ring Wheel chocks with holder Aluminum side impact protection Side impact protection set inward for optimal clearance to the swap body supports Steel underrun protection Underrun protection shortened for optimal clearance to the swap body supports; lighting system mounted in a protected position Rear mud flaps across the entire width (not compatible with forklift mount) Quarter-shell front fenders and half-shell rear fenders *Towing equipment for trailer turntable Towing fork with certified 40 mm tow eye Towing fork mechanically adjustable in length by approx. 6 x 100 mm (approx. 1900–2500 mm); towing fork length set to 2200 mm *Axles + Suspension BPW or SAF drum brake axles, at the manufacturer’s discretion Ledpfxozd Uvle Abyehh “Laser-aligned axles/chassis” to reduce tire wear and fuel consumption Air suspension *Brake System 2-line compressed air brake system Color-coded piping for easy maintenance. Air reservoir: 180 liters Spring-loaded parking brake 2 non-reversible coupling heads at the front, with connecting lines to the tractor unit, EBS, Electronic Brake System with EBS connector at the front, with connecting cable, Caution: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! With raise/lower valve, hold function in both lower and raise positions Axle load detection via EBS CAN bus signal, for display in the cab; the truck must be equipped accordingly; no truck installation (no calibrated scale) Tire pressure monitoring system *Wheels and tires 235/75 R17.5, brand selected by the manufacturer Steel rims in twin configuration, factory silver *Electrical System 24 volts, Aspöck Eco LED II multi-chamber lights, yellow LED side lighting linked to the turn signals (“flashing side lights”), LED license plate lighting, (Note: With certain towing vehicles, false diagnostics may occur even though the system is functioning properly) 2 white LED front position lights 2 white/red rear lane-keeping lights (LED) 2 x 7-pin reverse-polarity-protected connectors at the front, with connecting cable, LED work lights on both sides (activated by the reverse light) 2 additional LED work lights at the rear, activated by the reverse light 1 LED work light at the front, centered between the crossbars, shining toward the rear, activated by the reverse light *Country of Registration/License Plates Germany with DEKRA approval and certification (in accordance with §13 EG - FGV) 24/7 service hotline prepared for single-line license plate holders Contour marking with reflective strips in accordance with ECE R 048, white on the sides and red at the rear *Paint Finish Frame hot-dip galvanized or painted according to customer preference

Year of construction: 1988, condition: used, Precision saw arbor Meinert PH 502 D with pneumatic blade clamping system Ledpfx Abecrpz Seyshh for circular saws with a maximum diameter of 2000 mm.

Condition: used, Year of construction: 2000, Horizon AFC-504 AKT Automatic Combination Folder, Used The Horizon AFC-504 AKT is a proven and robust automatic combination folder, specially designed for efficient processing of brochures, inserts, and other folding jobs. Key Features: - Sturdy construction for reliable and long-lasting performance - Flexibility to handle various folding types and paper formats - Easy operation for quick setup times - Suitable for medium to large production volumes Technical Specifications: - Max. sheet size: 490 x 650 mm - Min. sheet size: 120 x 172 mm - Paper weight: 40 to 250 g/m² - Stack height: up to 650 mm - Production speed: up to 27,000 cycles/hour Lhjdjw Eu Rbepfx Abysh - Power supply: 400 V, 50 Hz, 2.5 kW - Dimensions (L x W x H): 2,540 x 1,790 x 1,440 mm - Weight: approx. 870 kg All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: good (used), Year of construction: 2012, Double frame filling system 8-20 mm frame width. Lodju Sy Tkopfx Abyehh For aluminium and TGI. Height: approx. 3200mm Width: approx. 1300mm Depth: approx. 1000 mm Weight: approx. 350 kg

Year of construction: 1958, condition: ready for operation (used), Offered is a conventional lathe. Swing diameter over bed: 500mm, swing diameter over support: 300mm, spindle bore: 58mm, taper in the tailstock quill: MT 4, design: conventional leadscrew and feed rod lathe, control: manual. Equipped with three-jaw chuck, four-way tool post, tailstock, chip tray. Weight: approx. 2200kg, overall dimensions X/Y/Z: approx. 2700mm/1100mm/1350mm. Inspection possible by arrangement. Ledezdknwjpfx Abyehh

Condition: used, Year of construction: 2007, Punching force: 500 kN For example, punch a 20 mm hole in 18 mm steel Lhedpfx Aoy Uybwsbyeh Stroke triggering via foot switch Assortment of tools is included in the price

Condition: used, CNC Press Brake COLLY 502/A Numerical Command: CYBELEC type DNC 32 P-CM Ljdpfx Ajzdimyebyehh Capacity: Maxi length 2000 mm x 50 T Throat depth: 200 mm Distance between uprights: 1600 mm Back Gear Gauge 1 axe Defective cylinder Right cylinder joint to change Machine functional (only right cylinder joint to change) Voltage: 380 V Length: 2500 mm Depth: 2100 mm Total height: 2400 mm Weight: approx 4 T

Condition: used, mileage: 1,001 km, power: 22 kW (29.91 HP), gearing type: mechanical, fuel type: diesel, color: green, overall weight: 8,000 kg, first registration: 01/1962, Year of construction: 1962, driver cabin: other, Vehicle location: Bovenden, steel superstructure, differential lock 2 cylinder Deutz engine 4206 Std. ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Lsdpfxovhhgis Abyjhh - .

Condition: used, empty load weight: 9,530 kg, maximum load weight: 21,470 kg, overall weight: 31,000 kg, axle configuration: 2 axles, first registration: 06/1999, loading space length: 13,400 mm, loading space width: 2,450 mm, loading space height: 2,240 mm, total length: 2,550 mm, total width: 3,850 mm, suspension: air, tire size: 295 / 80 R 22,5, color: silver, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, tail-lift, Vehicle location: Bovenden, central lubrication system, air suspension, 2 axles, BPW axles, last axle with forced steering, ABS (anti-lock braking system), aluminum loading platform. Lhjdpsi Rnwzefx Abyoh Superstructure: Frigoblock HK 25-2 for fresh produce transport, 2 tons, Dautel loading platform, drum brakes. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: used, empty load weight: 3,180 kg, maximum load weight: 14,820 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 02/2010, suspension: air, tire size: 265/70 19,5, tire condition: 70 %, color: white, Year of construction: 2010, front tire size: 265/70 19,5, rear tire size: 265/70 19,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference number for inquiries: 40180 Meiller, G 18 ZL * Year of manufacture: 2010 * ABS (Anti-lock Braking System) * EBS (Electronic Braking System) * Air suspension * Standard trailer Lsdpfx Asyicabsbyehh * Duomatic air coupling * 15-pin connector plug * Storage/toolbox * Pneumatic locking system * Suspension: Air * Gross vehicle weight: 18,000 kg * Unladen weight: 3,180 kg * Payload: 14,820 kg * Permissible total weight: 18,000 kg * Axle manufacturer: BPW * Tire condition, 1st axle: 60%|60% -- 60%|60% - Tire size: 265/70 R19.5 * Tire condition, 2nd axle: 70%|70% -- 70%|70% - Tire size: 265/70 R19.5 * Tire sizes: 265/70 R19.5 * Manufacturer: HKM Meiller Disclaimer: Subject to change, prior sale, and errors excepted. Further photos and videos are available on our website. Our comprehensive services include, for example: * Purchase / sale / rental of commercial vehicles * Fast and straightforward financing solutions * Handling of all (export) documentation * Ordering of export/customs license plates * Vehicle preparation: new tarpaulins, livery, paintwork, etc. * Professional loading and load securing * TÜV approvals, registration service * Transportation of commercial vehicles Please contact our trained staff, we will be happy to advise you.

Condition: good (used), Year of construction: 1993, Omga Pneumatic Corner Frame Assembly Machine Model: Joint 502 For assembling popular types of frames. During the stapling process, the machine operator has a clear view of the frames and can, if necessary, make required positional adjustments. The two frame components are placed into the stop and locked in position by a pneumatically actuated clamp equipped with a special rubber pad to prevent damage to delicate frames. The stop is adjustable, allowing for the insertion of two staples at the desired distance. The Joint 502 allows for two different staples, even of different sizes, to be inserted at the required axial spacing, with the two staple units positioned accordingly. Location: Available from stock, 54634 Bitburg Lhodpfx Abeyy S Uajyoh - available immediately -

Condition: used, Year of construction: 1992, operating hours: 6,254 h, Wheel loader ZL 1801 with original 6,254 operating hours. Rotating beacon at the front and rear. Road approval. 94 kW / 128 hp. Front axle load 7,000 kg. Lhsdpezahgqefx Abyeh Rear axle load 6,000 kg. Wheel loader in good overall condition, fully functional. No liability for typing and data transmission errors. Subject to errors and prior sale. Daily cash purchase of vehicles, construction machines, trailers, and semi-trailers manufactured from 2000 to 2026. Delivery throughout Germany is possible.

Condition: used, 502 Can Manufacturing Line Can 127mm dia Can weight 900g cans 130 cans/minute capacity Can fastening and embossing machine with associated controls and conveyor Slitter with sheet feed Stacking materials transfer system Can assembly welder Laquer curing tunnel, Can leak test system Can spin flanger CSW /54-MM 9F wide 0 -01 Can End Feed System Please note, this lot 30466-425 is offered for sale as a complete line. Its components are simultaneously offered as individual lots 30466-426 to 30466-433+N42 Bidders can bid on the complete line and/or on individual lots. Sales are conditional subject to seller approval. Ledpfoy Uxx Uox Abyjhh It is likely that the seller will approve the highest aggregate bid for the line either as a single lot or as individual lots. Successful bidders will be notified within 2 working days.