Sicon GmbH

Condition: ready for operation (used), Chip Conveyor, Screw Conveyor, Double Screw Conveyor, Used Machine Bsdpfoy H I Uiox Ak Hsdb Manufacturer: Ventilatorenfabrik Oelde GmbH Overall dimensions: Width: 9460 mm Depth: 1340 mm Height: 2300 mm Trough dimensions: 8830 × 900 × 340 mm Feed opening: 1230 × 1200 mm Discharge opening: 730 × 535 mm Electrical data: 400 V Double screw conveyor system.

Condition: used, functionality: fully functional, Year of construction: 1970, Block and tackle, approx. 100 m long, fully functional. Bdsdpsy Hb Euefx Ak Hsb Also tower crane with 36 m jib, partially defective controls. The stated price refers to the block and tackle. Tower crane approx. 5,000 euros.

Condition: used, !!! Attention: Only the conveyor system is being offered here !!! Offered here is a floor conveyor system for a wheel rim painting line. The system consists of the following components: - Conveyor chain - Conveyor rails (curved and straight sections) - Trolleys with mounts for automotive rims - Rotating rail: on this track, the rim rotates during the painting process to ensure an even application of paint - Conveyor motors (without control unit) Total length: approx. 150 m Maximum part diameter: 550 mm Maximum part height: 400 mm The system is suitable for both wet paint and powder coating applications. No control system is included in the scope of delivery. The system has been dismantled and packed in crates. Inspection is possible by appointment. The system must be serviced before commissioning. Bdsdpfsy Eviljx Ak Heb Two additional systems are available as well. These versions are suitable for curing processes in an oven.

Condition: used, Year of construction: 2000, functionality: fully functional, We are selling 2 Ruchser profile offcut transport trolleys. 12 compartments, each 90mm wide – these are infinitely adjustable. Width 850mm, length 1900mm. Transport trolley height 1800mm. Bdedpfx Akoy Dfq As Heb

Condition: good (used), Aeromechanical conveyor belt Floveyor – Vertical Motor: checked, 1.5 kW, 230/400 volt, 920 rpm Inlet / outlet diameter: 150 mm Vertical screw conveyor: checked Diameter: 75 mm Bdedpsy A N Ensfx Ak Hsb Length approx. 3500 mm

Condition: good (used), Rotaval H.D.200 Rotor: stainless steel Housing: aluminium Rotor clearance: Drive end: 0.18 mm Non-drive end: 0.18 mm Radial: 0.18 mm Bdodpfx Akeyyziyo Hob

Condition: used, Working length: 4060mm The traveling trolley size: 650x1700mm Bsdpfx Aoyyhqdsk Hsdb

Condition: used, Screw Conveyor, Auger Discharge Unit, Used Machine Manufacturer: Wildfellner Type: RL250T Year of Manufacture: 2015 Technical Specifications: Overall Dimensions (L x W x H): 5760 x 540 x 610 mm Trough Dimensions: 5500 x 280 mm Bdsdpfxsyyb Shs Ak Hjb Infeed Dimensions: 910 x 150 mm Weight: 480 kg Electrical Data: 400V; 4.45A

Year of construction: 2026, condition: new, Automatic Conveyor Systems – Power & Free, Floor and Overhead Conveyors Bdsdpfx Aksyx H Apo Hob We specialize in the design, engineering, and manufacturing of automatic conveyor systems, including: - Power & Free conveyors for flexible material flows with varying cycle times - Floor conveyor systems for transporting heavy or oversized loads - Overhead conveyor systems, available in manual or fully automatic versions, for optimal use of available space Our conveyor systems are used across a wide range of industries – from surface treatment and assembly to in-house logistics and final processing. Our range of services includes: - Custom planning and design of conveyor systems based on detailed customer specifications - Manufacturing and installation of mechanical and electrical components - Modernization and expansion of existing systems to enhance performance and optimize processes - Integration into higher-level automation and control systems (e.g., Siemens, Beckhoff) Our priorities: Reliability, efficiency, and tailored solutions are our core principles. By combining innovative technologies with many years of experience, we develop durable, energy-efficient, and future-proof conveyor systems that precisely meet our clients’ requirements.

Condition: good (used), Roller conveyor, conveyor belt, roller track -Manufacturer: Soco System, non-powered roller conveyor, 2-section, 2.0/2.0 m, height adjustable -Track width: 600 mm Bdedsyw H Hrjpfx Ak Hsb -Rollers: Ø 48x15 mm -Price/Fee: complete -Dimensions: 2000/820/H720 mm / 2000/670/H650 mm -Weight: 150 kg

Condition: good (used), Fan, blower, electric motor, blower, emergency ventilation fan, flue gas fan, axial fan, axial ventilator, axial fan, axial ventilator, suction fan, high-performance axial fan, stable fan -Manufacturer: Multifan, Axial fan, Duct fan type 6E40 -Motor: 0.17 kW 900 rpm -Flow rate: 3760 m³/h Bdsdeywib Eopfx Ak Hob -Protection class: IP 55 -Number: 1x fan available -Dimensions: 500/450/H480 mm -Weight: 10 kg

Year of construction: 2026, condition: like new (used), Scraper chain conveyor WISSMATEC; stable steel construction; wear plate; chain with carriers; drive with gear motor. Bdsdpfxeyv Uu Uj Ak Heb

Condition: good (used), Fan, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, ventilation blower, exhaust gas extraction -Manufacturer: ebmpapst, Radial fan type R2E133-BH66-26 -Voltage: 230 V -Speed: 2800 rpm -Power: 24 W -Dimensions: Ø 134 x 90 mm Bedpjyu Nrwsfx Ak Hsdb -Weight: 0.6 kg

Condition: good (used), Fan, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, ventilation blower, exhaust gas extraction -Manufacturer: ebmpapst, Radial fan type R2E133-BH66-34 -Voltage: 230 V -Speed: 2700 rpm -Power: 25 W -Dimensions: Ø 134 x 90 mm Bdodpfx Ajyu Nk Hsk Hjb -Weight: 0.6 kg

Condition: used, functionality: unexamined, For sale: Bizerba conveyor belt, roller width 480 mm, length 1500 mm, extension 660 mm, height to belt 1050 mm. (No. 73A) Net price: 300 Euro. Bjdsyuqugopfx Ak Hjdb

Year of construction: 2025, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 20251122351, Complete solution for transporting bulk materials such as wood chips, wood pellets, shredding material, granulate, etc. Aluminium angled conveyor belt incl. mobile frame Horizontal section: 1,200 mm Inclined section: 1,800 mm Angle at bend: 40 degrees each Infeed height from floor: 500 mm Discharge height: 1,600 mm Conveyor belt width: 700 mm Extremely robust aluminium construction, heavy-duty version! PU conveyor belt incl. cleats and corrugated sidewalls Drive: Motor 0.55 kW (customizable), speed approx. 0.77 m/sec Connection: 220/240V, 50Hz, IP54 protection class Drive etc. ready for connection, motor control optional Corrugated sidewalls: 80x50 mm T-60 cleats, short pitch 2-ply, especially cross-stabilized Sidewalls and cleats, as well as belt, are endlessly high-frequency welded In the angled section, the belt is guided on both sides by 4 hold-down rollers each. The belt is produced with a 100 mm edge-free zone on both sides. Due to the corrugated sidewalls on both sides, the usable belt width is reduced: Usable width: 400 mm, calculated as follows: (top view) lateral arrangement 100+50+400+50+100 mm Demo unit - Available immediately! - Can be viewed under power All prices are net prices plus 19% VAT All information without guarantee, only while stocks last! Bedpeyt Ia Dsfx Ak Hedb

Year of construction: 2025, operating hours: 1 h, condition: like new (used), functionality: fully functional, machine/vehicle number: BR-BTRS-100-250003, As-new Brinkmann Technology BTRS100 screw conveyor, year of manufacture 2025, equipped with control unit, flushing valves, adapter pieces, adjustable motor power, and Easy-Clean cleaning package. We have only tested the screw conveyor. Due to a change in technology, it has never been put into operation. Manufacturer: Brinkmann Technology GmbH Bdsdpoytql Nofx Ak Hsb Year: 2025 Type/Model: BTRS100 Designation: BTPS100 pipe screw conveyor Serial number: BR-BTRS-100-250003 Power: 1.5 kW Original price: €13,000 (net) Further documents (technical drawings, operating manual, invoice, etc.) available upon request. If you have any questions or require more information, feel free to send us a message or call us.

Condition: excellent (used), rail system, switches, drives, stops, tensioners, chains, carriage assemblies, beams. Bdedpfx Akoyq Rfdo Hob Detailed list in the pictures. Without control!

Condition: used, length 5650 mm Bdedpfx Asynntyek Heb height over floor 400 mm width 300 mm total power requirement 2,9 kW Reinhardt conveyor belt type DB300 A for the efficient transport of wood, firewood, chips, and workpieces in woodworking. The robust construction enables a reliable and continuous conveying process in production lines, firewood production, and workshops.

Condition: like new (used), functionality: fully functional, Year of construction: 2023, lifting height: 11,000 mm, overall weight: 7,000 kg, lifting speed: 250 mm/s, power: 5.5 kW (7.48 HP), input voltage: 230 V, input frequency: 50 Hz, Two (2x) entire units, each with maximum 11m lift, procured directly from manufacturer, delivered in 2024 but never assembled or used. All components have been stored in dry conditions. Can be configured for less than maximum lift. Bdedpfoymx Avox Ak Hjb All documentation available. Price is per unit. Open to counter-offers. Purchaser must collect.

Year of construction: 2020, condition: good (used), Fan, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, axial fan, axial ventilator, axial fan -Manufacturer: Dunli, Axial fan Axial fan Bjdpjylhwgofx Ak Hodb -Type: YMF.A4T-630S-7FIIIS01 -Power: 1.4 kW at 1400 rpm -Fan wheel: Ø 630 mm / see photos -Quantity: 1x fan available -Dimensions: 805/805/H265 mm -Weight: 36 kg

Condition: like new (used), functionality: fully functional, machine/vehicle number: seri nr 84138, Year of construction: 2024, operating hours: 5 h, load capacity: 30,000 kg, fuel type: electric, empty load weight: 16,800 kg, total length: 1,40,000 mm, Combilift container loading system suitable for 20, 30, and 40 FT containers. Includes 2 container transport wagons. Bodpfx Aoyigkdsk Hedb

Year of construction: 2026, condition: new, Robust Steel Construction – Designed for Continuous Operation The basic structure consists of a stable construction steel frame, manufactured from laser-cut, bent, and welded components. The surface features a high-quality RAL0208 powder coating. Modular Design: Our conveyor belt frames are available as transportable sections. This makes the system: • Easy to transport and assemble • Extendable or shortenable at any time • Ideal for future modifications or system adaptations Conveyor Technology & Carrying Rollers The carrying roller construction in the lower run is designed for smooth and reliable operation: • Shaft diameter: 60/15 mm • Roller station spacing: approx. 500 mm (customizable) • Closer roller spacing in the infeed area available on request for higher load capacity Drive & Rollers The drive drum and return drum are made of S235 steel, welded and precisely machined: • Ø 220 × 700 mm, crowned and finish-turned • Shaft secured with tension bearings • Bearing positions with robust UCF flange bearings, including lubrication nipples Drive Unit: • Hydromec worm gear motor, 1.1 kW • Belt speed: approx. 1.15 m/s • Connection: 400V / 50 Hz, protection class IP54 • Drive supplied ready for wiring to motor terminal box (commissioning must be carried out by a qualified electrician) • Motor mounted on the right, pull configuration in the conveying direction Conveyor Belt A durable, industrial-grade belt is used: • DM EP250/2, 3+1.5 cover • Chevron profile 17 mm high, 650 mm wide • Profile-free splice area • Endless hot vulcanized Custom Options & Accessories (depending on requirements) The modular design allows all components to be precisely adapted to your process, such as: ✅ Special lengths & widths ✅ Side plates / wave edges (for lateral guidance and increased conveying stability) ✅ Infeed plates / feed plates (wear-optimized, material-friendly) Bodpfx Asyhznnek Hodb ✅ Feed/infeed hoppers (for clean loading of bulk material) ✅ Discharge plates / discharge chutes ✅ Cleat profiles / alternative belt specifications ✅ Adjustment of roller spacing & carrying roller geometry ✅ Special coatings / custom designs

Year of construction: 2026, condition: new, DM Flat Conveyor Belt Type FB-700 without substructure for bulk material conveying Conveyor belt length: 6,000 mm Belt width: 650 mm Fabricated from structural steel, laser-cut, bent, and welded Base frame powder-coated in RAL 5015 Modular conveyor belt frame construction / sections available in transportable lengths. Frame structure extendable or can be shortened at any time. Carrier roller system on the return strand, shaft Ø60/15 mm Roller station spacing approx. 500 mm (custom options possible) Closer roller spacing in load area Drive drum + tail drum made of S235 steel, welded and machined Ø220x700 mm crowned, shaft fixed with pillow block bearings. Drive: Hydromec worm gear motor 1.1 kW, belt speed 1.15 m/sec Connection 400 V, 50 Hz, protection class IP54 Bdodpfx Akjyhznhj Heb Drive supplied prewired to motor terminal box (Commissioning must be performed by a qualified electrician) Motor mounted on right side in direction of transport, pull configuration. Bearing points equipped with robust UCF flange bearings incl. grease nipples. Rubber conveyor belt DM EP250/2 3+1.5 cover Chevron profile, 17 mm high x 650 mm wide Joint section without profile, endlessly hot vulcanized

Condition: new, Year of construction: 2026, functionality: fully functional, Aluminum Z-conveyor belt with base frame, including adjustable feet and freely swiveling transport castors with parking brakes. Bdsdpjyhzhnefx Ak Hsb Horizontal section: 800 mm Inclined section: 3,000 mm Second inclined section: 1,200 mm Angle of incline at each bend: 60° Total conveyor belt length measured on the floor: 3,500 mm Height of the horizontal section: 400 mm Design: - Aluminum construction with 2x reinforced profile, 90x45 mm - Full-surface discharge sheet, 2.0 mm, galvanized - Drive roller and deflection roller made from welded and machined S235 steel - Ø100x720 mm crowned turning, shaft fixed with pillow block bearings Drive: Parallel shaft geared motor 1.10 kW, belt speed: 0.53 m/sec Connection: 230/400V, 50 Hz, protection class IP54 Drive wired ready for connection up to the motor junction box (commissioning must be performed by a qualified electrician) PU conveyor belt DM 10/2 0+005 PU, including wave edge PU, petrol matt finish, AS, especially cross-rigid with hard cover Conveyor belt width: 700 mm 2 pcs. wave edges, 50 mm high, 25 mm wide, high-frequency welded 34 pcs. T40 cleats, centered, 430 mm long, spacing approx. 299 mm Belt material: 2-ply, especially cross-stable At each bend, the belt is guided on both sides with 3 hold-down rollers each. The belt is manufactured with a 70 mm edge-free zone on each side. Due to the wave edge on both sides, the usable belt width is reduced: Usable width: 500 mm, determined as follows: (top view) Cross-section 70+25+5+500+5+25+70 mm Belt guidance via PVC V-guide on the running surface, profile 10x6 mm - Includes cut-out in the discharge sheet - Includes slide bushings in the drive and deflection rollers