G. HEEG Handel Montagen Dienstleistungen

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 100597, pressing force: 1,000 t, overall weight: 33,000 kg, TECHNICAL DETAILS Punching force: 10,000 kN Table area (W x D): 1,100 x 800 mm Stroke: 15 - 55 mm Clearance at max. stroke: 28 - 98 mm Die thickness: up to 3 mm Sheet size (width): max. 1,100 mm Punching speeds Upward: 47.8 mm/s Downward: 93.7 mm/s Punching: 0.28 mm/s Hydraulic unit Type: 250 Dimensions (L x W): 1,310 x 910 mm Oil capacity: 670 l Unit weight: 1,000 kg Oil weight: approx. 550 kg Weight with oil: approx. 1,550 kg Automatic punching table Type: 355 Table plate size (W x D x H): 1,000 x 700 x 10 mm Hardness: 62 HRC Grinding pattern: 7 MACHINE DETAILS Electrical system Operating voltage: 400 V Frequency: 50 Hz Rated machine current: 50 A Supply line fuse: 63 A Control voltage: 230/24 V Rated power: approx. 30 kW Protection class: IP 54 Power consumption: approx. 8 kW Pneumatics Operating pressure: 6 bar Dimensions & Weight Dimensions of the puzzle separator (L x W x H): 3,150 x 1,620 x 2,900 mm Working height: approx. 1,700 mm Hfjdpfxezfy Amo Al Aji Total weight: 33,000 kg Weight of the puzzle separator: approx. 1.8 t Noise level: < 70 dB(A)

Condition: new, Year of construction: 2021, functionality: fully functional, machine/vehicle number: 51045/1504/C, pressing force: 300 t, input voltage: 400 V, type of input current: DC, total width: 4,200 mm, total height: 2,450 mm, overall weight: 14,000 kg, total length: 7,070 mm, DGM TECHNOCUT 1050S Fully Automatic Die-Cutting and Stripping Machine Manufacturer: DGM (Huizhou Degang Machinery Co., Ltd.) Model: TECHNOCUT 1050S Year of Manufacture: 2021 Condition: New, never used in production Technical Specifications: Max. sheet size: 1050 × 740 mm Min. sheet size: 400 × 360 mm Max. die-cutting size: 1040 × 730 mm Paper thickness: 80–2000 g/m² Corrugated board thickness: up to 4 mm Maximum speed: 7,500 sheets/hour Maximum pressure: 300 tons Die-cutting accuracy: ±0.075 mm Gripper margin: 9.5 mm Installed power: 20 kW Machine weight: 14,000 kg Machine dimensions: 7070 × 4200 × 2450 mm Equipment: Automatic non-stop feeder Registration system with front and side guides Double sheet detector Die-cutting section Automatic stripping section Pneumatic chase locking system Automatic lubrication system Cooling oil circulation system Touchscreen control Hedpfxszdcczo Al Asfi Suitable for: Folding carton production Packaging manufacturing Corrugated board processing Commercial printing finishing Die-cutting and creasing operations The machine is located in Lithuania and is available for immediate inspection and delivery.

Condition: ready for operation (used), Year of construction: 2010, An Inotec spindle press for rolling and forming sheet metal bodies of various sizes is available. Safety distance: 350mm, max. product diameter: 350mm, control system: PLC, weight: approx. 1800kg. Including pressure plate magazine and various tool sets. Documentation available. An on-site inspection is possible. Hfedpszbuvhsfx Al Aji

Condition: ready for operation (used), Year of construction: 1995, A sheet metal blank feeding press Alfons Haar for metal can production in the packaging industry is available. Press force: 40t, stroke: 170mm, max. speed: 180rpm, drive power: 18.5kW, cutting circle diameter: 400mm, max. drawing depth: 55mm, max. sheet dimensions X/Y: 1150mm/1000mm, material thickness range: 0.1mm-0.5mm, throughput: approx. 520cans/min, machine dimensions X/Y/Z: approx. 8950mm/4500mm/3900mm. An on-site inspection is possible. Hsdpfey Ndf Aex Al Aefi

Condition: ready for operation (used), Year of construction: 1968, A mechanical Karges-Hammer eccentric press for series production in can manufacturing is available. Ram stroke: 75mm, flywheel speed: 80rpm, motor power: 3HP, speed: 294rpm. An on-site inspection is possible. Hfsdpsy Ndfpjfx Al Asi

Condition: ready for operation (used), Year of construction: 1968, A mechanical Karges-Hammer eccentric press for series production in can manufacturing is available. Ram stroke: 75mm, flywheel speed: 80rpm, motor power: 3HP, speed: 294rpm. An on-site inspection is possible. Hodoy Ndfiopfx Al Aofi

Condition: used, Year of construction: 2007, operating hours: 2,568 h, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, overall weight: 4,900 kg, pressure: 200 bar, electrical fuse: 27 A, We offer this used LUX VM-TEC K50V4 baler for paper, foil, and plastics, year of manufacture 2007. The baler comes complete with conveyor. Model: K50V4 Year of manufacture: 2/2007 Production number: abba359 Serial number: Cont-000089 Power: 18.5 kW Current: 27 A Voltage: 400 V Frequency: 50 Hz Hfodpfxsy H E R Ij Al Aji Maximum pressure: 200 bar Weight: 4,900 kg If you have any questions or require further information, please feel free to send us a message or contact us by phone.

Condition: used, Year of construction: 2001, Titan Die Cutter MLF 170 Year: 2001 with chrome-plated and precision-ground cutting bed Complete with safety guards and operator panel Electrical and hydraulic systems Cutting bed with cold and hot working system CE certified Zenari Engineering Feeder / Pile Turner Model: MettilevaFogli MLF 170 (2002) Automatic pile feeding system Hjdpfoyu N R Hex Al Ajfi Hydraulic lifting and transfer system with rollers Adjustable speed and pile height control Max sheet format: 1200 x 1700 mm Max sheet format: 500 x 700 mm Cutting force: suitable for heavy carton and corrugated board Automatic feeder (Zenari MLF 170) Die cutting press (Titan MLF 170) Delivery system with roller track Safety features: full enclosure and operator access controls Regularly serviced and maintained

Condition: used, Year of construction: 2001, two head two lance CE RULES width 2600mm H 4000 Hfsdpfx Alsxtdu As Asi

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: W400-RM-016, type of input current: three-phase, overall weight: 1,700 kg, Zemat W-18-200 Roll Die Cutting Machine Hfodpfx Ajwcm Tiel Aji Working width 1800mm, 100mm gap between the rollers

Year of construction: 2005, condition: reconditioned (used), AUGER COMPACTORS Auger compactors are designed for the disposal of large quantities of material. Bulky materials can also be compacted effectively. The continuous rotation of the auger draws the material to be compacted into the high-performance compactor. The compaction takes place in the adjacent container. Compared to piston presses, up to 60% higher container fill levels can be expected here. used, fully functional machines Hfodpfx Alsgypgaj Asi Price from €3,300 depending on condition, VAT exclusive. Delivery possible.