Used Hay technology for sale (39)

Condition: new, Year of construction: 2024, Working width: 420 mm, _____Krone Swadro S 420 single-rotor rake with three-point linkage -Working width 4,200 mm -Swath width approx. 800 - 1,500 mm* -Transport width approx. 2,265 mm -Weight approx. 640 kg -Rotor diameter: 3,300 mm -13 tine arms, seven of which are folding tine arms -Four double tines per arm -PTO shaft speed 540 rpm -Power requirement approx. 37 kW (50 hp) Basic equipment -Three-point linkage Cat. II (lower link arm can be mounted in two positions) -Damper struts with internal compression springs -Self-centring of the rake when lifting -Tracking device of the headstock for cornering up to 20° -PTO shaft, 1 3/8'', Z=6, freewheel, overload clutch rotor+rotor chassis -Drawn rotor suspension incl. KRONE Jet-Effect rotor gearbox with maintenance-free fluid grease filling, fully hardened KRONE Dura-Max cam track L-bearing of the tine arms by means of maintenance-free deep groove ball bearings -10.0 mm trailing double tines with large winding diameter and "lift effect" -tines mounted around the tine arm to prevent loss -manual, infinitely variable adjustment of the rotor working height incl. -Manual, stepless adjustment of rotor working height incl. rotor height indicator with scale -Adjustable lateral tilt of the rotor -Tandem rotor chassis with 16x6.50-8 tyres -Additional equipment Telescopic, steplessly adjustable swath cloth that can be swivelled upwards Warning signs Illustration similar,Storage location:GU C92I90U

Condition: used, Year of construction: 2023, Hay tedder Samasz P6-651 Cfr3D97Fmg

Condition: repair required (used), Year of construction: 2012, Power: 44 kW (59.82 HP), Some electrical wiring inspection & partial mechanical assembly is needed to run this machine. Ntkczkkc

Condition: new, Year of construction: 2024, he shredder is designed for shredding straw or hay pressed in rolls. In certain cases, after obtaining the manufacturer’s permit or testing, it is possible to shred square or rectangular pressed bundles. Required fraction of the shredded product at the output is possible after selecting a sieve of a certain throughput from the range offered by the manufacturer. In case product fractions of a smaller size are needed, insert a finer sieve, and vice versa. Technical Data of Shredder Capacity: 500 – 1200 kg/h Shredding fraction: 10 – 35 mm Rkhbukzbyv Humidity of raw material:

Condition: used, Year of construction: 2007, _____Fella TS 1603Baujahr 2007SeitenschwaderWorking width: approx. 7.7 meters2 rotorsLighting,Storage location:null Bxhydh7Z

Condition: new, Year of construction: 2023, _____Krone TC 680 twin-rotor mid-mounted rakeWorking width: 6,800 mm Swath width: approx. 1,000 mm* Transport height: 3,990 mm (without folding tine arms) Weight approx. 1,700 kg (basic machine)Rotor diameter: 3,300 mm 2 x 10 tine arms Max. PTO speed 540 rpmPower requirement approx. 37 kW (50 hp) Required hydraulic connections: 1 x EW incl.:-mechanically height-adjustable hydraulic control-tyres 10.0/75-15.3-PTO shaft-rigid tine arms-swathing cloth,Storage location:GU R027Hcarch

Condition: used, Year of construction: 2022, new rear mower from KUHN with 2m working width Dpdwfn

Condition: new, Year of construction: 2023, _____Krone Single-rotor rake, three-point linkage Swadro S 380Basic equipment Attachment: Three-point linkage Cat. II (lower link arm can be mounted in two positions) Damper struts with internal compression springs Self-centring of the rake when lifting out Tracking device of the headstock for cornering of up to 20° PTO shaft, 1 3/8'', Z=6, freewheel, overload clutch Rotor+rotor chassis: Drawn rotor suspension incl. KRONE Jet-Effect rotor gearbox with maintenance-free fluid grease filling, fully hardened KRONE Dura-Max cam track Tine arms mounted on maintenance-free deep groove ball bearings 10.0 mm double tines with large winding diameter and "Lift-Effect" tines mounted around the tine arm to prevent loss Manual, stepless adjustment of the rotor working height incl. Rotor height indicator with scale Adjustable lateral tilt of the rotor Tandem rotor chassis with 16x6.50-8 tires Additional equipment: Telescopic, infinitely adjustable swath cloth that can be swivelled upwards Warning signs, storage location: GU Dpcjx2

Condition: used, Year of construction: 2023, Hay tedder Samasz P4-471 Bnsgzzu3J8C

Condition: new, Year of construction: 2023, Working width: 460 mm, Tandem axle, rear-mounted, side rake_____Krone Swadro S 460Single-rotor rake, three-point linkageWorking width 4,600 mmWidth of swath approx. 800 - 1,800 mm*Transport width approx. 2,550 mmWeight approx. 665 kgRotor diameter: 3,600 mm13 tine arms, seven of which are folding tine armsFour double tines per armPTO shaft speed 540 rpmPower requirement approx. 37 kW (50 hp),Storage location:GU Bvmfb8K7

Condition: used, Year of construction: 2023, Hay tedder Samasz P4-471 Cub2Itb9Qc

Condition: new, Year of construction: 2023, _____Meadow harrow 6.00m Three-point linkage Cat. II cast element heavy, 4 rows hydraulic design (1 cylinder double-acting) mechanical transport safety device harrow field connected to main frame by means of shackles skids, storage location:HOF Ba3Qhidj

Condition: used, Year of construction: 2022, Samasz rear mower in mint condition with a working width of 2.60 m 2Jv8Kyn

Condition: used, Year of construction: 2008, _____Front disc mowerWorking width 2710mmwith PTO shaftDefect: Hairline crack in cutter bar,bearing location: Cui8Qmruok

Condition: used, Year of construction: 2023, Mower year 2022 from Samasz Lrhmelj7

Condition: new, Year of construction: 2023, _____Krone Rotary tedder Vendro 900 Attachment: Three-point headstock (Cat II) incl. Pendulum suspension by means of ball eye and Vendro roller Hydraulic damper struts Parking concept with two parking supports (front & rear) Self-centering of the tedder when lifting out in transport position Drive train: Maintenance-free rotor gearbox running in fluid grease, maintenance-free Octo-Link finger clutches Rotors: Protected against foreign body contact by overload clutch PTO shaft, 1 3/8'', Z=6, overload clutch Freewheel rotor integrated in driveline Three-dimensionally shaped KRONE OptiTurn tines with 3D effect and unequal length tine legs, 9.5 mm tine thickness Tool-less spreading angle adjustment 13-19°, tine overrun triple adjustable, tine loss protection Rotor tires: tires 16x6.50-8, central 16x9.50-8 Boundary spreading: Centrally adjustable boundary spreading device, hydraulic (DW) Other equipment: Warning signs similar to illustration, storage location: GU Dppjmp

Condition: new, Year of construction: 2023, _____Krone Rotary tedder Vendro 820 for three-point linkage Working width 8,135 mm to DIN 11220 Transport width approx. 2,750 mm Weight approx. 1,240 kg Eight rotors Five tine arms per rotor Rotor rotor diameter: 1,376 mm PTO shaft speed 540 rpm Hydraulic connections required: 2 x DW Power requirement approx. 48 kW (65 hp),Storage location:GU Crhggmpweu

Condition: used, Year of construction: 2010, Empty load weight: 1,532 kg, _____Kuhn GA 7501 Medium rakeBuilt in 2010Two-point linkage Cat 2 (trailed)Steered chassisTires 10.0/75x15.3Hydraulic connections 1x EW control unit,Storage location:null Ciecfygu8W

Condition: new, Year of construction: 2023, _____Krone Vendro 560 Rotary tedder for three-point linkageWorking width 5,538 mm according to DIN 11220Transport width approx. 2,900 mmWeight approx. 785 kgFour rotorsSeven tine arms per rotorRotor diameter: 1,828 mmPTO shaft speed 540 rpmRequired hydraulic connections: 1 x EWPower requirement approx. 37 kW (50 hp)AttachmentThree-point linkage (Cat II) incl. oscillating suspension using Vendro ball joint and rollerAdjustable damper struts Three-point headstock (Cat II) incl. oscillating suspension by means of ball eye and Vendro rollerAdjustable damper struts with internal compression springsPitching concept with two parking supports (front & rear)Self-centring of the tedder when lifting out in transport positionDrive trainMaintenance-free rotor gears running in fluid grease, maintenance-free Octo-Link finger clutchesRotors protected against contact with foreign bodies by overload clutchPTO shaft, 1 3/8'', Z=6, overload clutchOverrunning clutch integrated in the drivelineRotorsThree-dimensionally shaped KRONE OptiTurn tines with 3D effect and unequal length tine legs, 9.5 mm tine thicknessTool-free spreading angle adjustment 13-19°, tine caster adjustable in three positions, tine loss protectionRotary tyresTyres 16x6.50-8Limit spreadingCentrally adjustable limit spreading device, manualOther equipmentWarning signs,Storage location:GU G83Rsizlj

Condition: used, Year of construction: 2001, Hydraulic folding, rear-mounted_____Kuhn GF 6401MHO* rotary tedder with 6.4 m working width* trailing device* balloon tires* 6-tine arms per rotor* lighting system* PTO shaft, bearing location: Dpldbn

Condition: used, Year of construction: 2015, Working width: 460 mm, _____Krone rake 46-Working width: 4.60m-Swath width: approx. 0.80-1.80m-13 tine arms, 7 of which are folding tine arms-Gyratory diameter: 3.60m-4 double tines per arm,Storage location: Dpgopb

Condition: new, Year of construction: 2024, _____Krone Swadro 35 single-rotor rakeTechnical dataSingle-rotor rake, three-point linkageWorking width 3,500 mmSwath width approx. 600 - 1,200 mm*Transport width approx. 1,900 mmWeight approx. 532 kgDiameter of rotor 2,700 mmTen tine arms, including five folding tine armsThree double tines per armPTO shaft speed 540 rpmPower requirement approx. 22 kW (31 hp)Basic equipmentAttachment- Three-point linkage Cat. I/II- Damper struts with internal compression springs- Self-centring of the rake when lifting- Tracking device of the headstock for cornering up to 20°- PTO shaft, 1 3/8'', Z=6, freewheel, overload clutchRotors+Rotating gear- Drawn rotor suspension incl. KRONE Jet-Effect rotor gearbox with maintenance-free fluid grease filling, fully hardened KRONE Dura-Max cam track Bearing of the tine arms by means of maintenance-free deep groove ball bearings- 10.0 mm trailing double tines with large winding diameter and "lift effect" - tines mounted around the tine arm to prevent loss- Manual, stepless adjustment of the rotor working height- Adjustable lateral tilt of the rotor- Tandem rotor chassis with 16x6.50-8Other equipment- Telescopic, infinitely variable and upward swivel swath cloth- Warning plates- PTO shaft with freewheel, bearing location:GU Bu3Ld0Fmlo

Condition: new, Year of construction: 2022, Working width: 420 mm, Number of rotors:4, hydraulic folding, rear-mounted_____Krone Vendro 420 Highland tedderLightweight construction and close to the tractorTechnical dataTedder for three-point linkage (all components designed for intensive alpine use with two-axle mowers and small standard alpine tractors up to max. 120 hp)Working width 4,175 mm 120 hp)Working width 4,175 mm according to DIN 11220Transport width approx. 2,420 mmWeight approx. 465 kgFour rotorsFive tine arms per rotorRotor diameter: 1,376 mmPTO shaft speed 540 rpmRequired hydraulic connections: 1 x EWPower requirement approx. 25 kW (34 hp)Standard equipment:AttachmentThree-point linkage Cat. II (lower link arm can be mounted in two positions) incl. Hydraulic damper strutsPitching concept with two parking supports (front & rear)Self-centring of the tedder when lifting into transport positionDrive trainMaintenance-free rotor gearbox running in fluid grease, maintenance-free Octo-Link finger clutchesRotors protected against contact with foreign bodies by overload clutchPTO shaft, 1 3/8'', Z=6, overload clutchRotorsThree-dimensionally shaped KRONE OptiTurn tines with 3D effect and unequal length tine legs, 9.5 mm tine thicknessTool-free spreading angle adjustment 13-19°, tine overtravel three-way adjustable, tine loss protectionRotary tyresTyres 15x6.00-6Central adjustable border spreading device, manual,Storage location:GU Zfgrnlvv0

Condition: used, Year of construction: 2000, Front tire size: 0%, Rear tire size: 0%, Working width: 650 mm, Trailed, hydraulic folding, steering axle_____Pöttinger side swather Eurotop 6.51 A-mech. height adjustment-knuckle steering,storage location:GU Hu2Yuwg

Condition: new, Year of construction: 2024, _____Düvelsdorf Silage roller side shift 3.00m, boom right transport width 3.00m, empty weight 1995kg (fully equipped 2950kg) + approx. 1000kg water filling, drum diameter 1070mm, corrugated 175mm high webs for deep compaction and good self-propulsion, total side shift 600mm, 300mm on both sides, LED lighting, attachment Cat II7Cat III boom with 2x wheels 500/50R17, edge angle max. 52°, boom with high contact pressure adjustable via DBV-electr. pressure adjustment silage roller-pulling device via wire rope, spring-loaded and self-centering-two Stz hooks for drawbar eye incl. bracket silage roller side shift, storage location:GU Beibthe