neuform-Türenwerk Hans Glock GmbH & Co. KG

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 100041047, feed length X-axis: 3,000 mm, feed length Y-axis: 1,000 mm, feed length Z-axis: 60 mm, power of the milling unit: 3,500 W, saw blade diameter: 160 mm, feed rate X-axis: 100 m/min, workpiece height (max.): 60 mm, power: 25 kW (33.99 HP), table width: 1,000 mm, table length: 3,000 mm, air demand: 1,800 m³/h, overall weight: 3,300 kg, Subfamily: CNC Machine for Flexible Drilling Type of Work: Drilling, Routing Dodpfx Adjx Dlfqedscr X-axis Working Area: 3000 mm Y-axis Working Area: 1000 mm Maximum Panel Passage: 60 mm Number of Working Areas: 1 Collet for Securing Workpiece: Number of Collets: 2 – Pocket – Sandwich type Automatic Panel Stacker System: With Motorized Transfer Boring Units: 2 Vertical Boring Spindles: 29 Horizontal Boring Spindles in X-direction: 8 Horizontal Boring Spindles in Y-direction: 4 Lower Unit (2): - Vertical Boring Spindles: 29 - Horizontal Boring Spindles in X-direction: 8 - Horizontal Boring Spindles in Y-direction: 4 - Routing Spindles: 2 Upper Unit (1): - Number of Controlled Axes: 3 - Motor Power: 3.5 kW - Max RPM: 18,000 Lower Unit (2): - Number of Controlled Axes: 3 - Motor Power: 3.5 kW - Max RPM: 18,000 - Grooving Units: 2 Upper Unit (1): - Grooving Unit - Fixed Unit for Grooves in X Direction - Max. Tool Diameter: 150 mm - Motor Power: 1.7 kW Lower Unit (2): - Grooving Unit - Fixed Unit for Grooves in X Direction - Max. Tool Diameter: 150 mm - Motor Power: 1.7 kW Control System: PC Control Machine Programming Software: Biesse Works Safety Standard: CE Mark - Protective mesh secured to the machine - Front safety mats Total Installed Power: 25 kW

Condition: used, Year of construction: 2006, BACCI DOUBLE is a double head CNC machining center with 10 interpolated axes, numerically controlled, equipped with automatic hopper feeder. DOUBLE is designed for joinery operations as: tenoning, finger jointing, boring, mortising, milling, both at the ends of the elements and also between the ends. • Serial number AB 059, • 380 V, 50 Hz, 50 kW, • OSAI control, • Axes o X-axis 2400 mm, o Y-axis 650 mm, o Z-axis 1000 mm, Dcodpfx Adex Dib Njdjr o A-axis 360°, o B-axis 260°, • Machining dimensions: L min. 150 mm, L max. 2400 mm, W max. 250 mm, H max. 100 mm, • Input speed X, Y and Z axes 50 m/min, • Max. tool diameter 200 mm, • 4 tool positions per machining side, • 2 pneumatic clamps, • Spindle taper ER 32, • Spindle information right side: Speed 12000-24000 rpm, Power 7.4 kW, • Spindle information left side Page: Speed 12000-24000 RPM, Power 7.4 kW,

Condition: used, machine/vehicle number: 008370, X axis working area: 5055 mm Dsdpfx Adex A Tk Sjdscr Y axis working area: 1930 mm Working Table: Pod and Rail Main Electrospindle power: 19 KW Number of controlled axes: 5 axes Maximum edge height: 60 mm Total number of drilling spindles: 29 Total number of tool changer positions: 31

Condition: used, machine/vehicle number: 008321, X axis working area: 4200 mm Y axis working area: 1350 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Number of controlled axes: 4 axes Maximum edge height: 60 mm Total number of drilling spindles: 18 Total number of tool changer positions: 22 Dedpfxox A Tdls Addocr

Condition: used, machine/vehicle number: 008198, X axis working area: 4200 mm Y axis working area: 1400 mm Working Table: Pod and Rail Dcjdpfx Asx A Hbkoddsr Main Electrospindle power: 18.5 KW Number of controlled axes: 4 axes Maximum edge height: 60 mm Total number of drilling spindles: 35 Total number of tool changer positions: 26

Condition: used, Year of construction: 2023, Exhibition Machine Garbsen CNC-CONTROLLED MACHINING CENTER morbidelli m100 Drilling and Milling Made for You! This numerically controlled machining center is equipped with a comprehensive range of accessories and tools for milling and drilling, enabling it to meet every requirement in the field of wood processing. Highly efficient – with drilling spindles reaching up to 8,000 rpm – and featuring technology that includes the most robust spindle available on the market, offering more than 1,000 hours of maintenance-free operation. Fully equipped – the suction cups can be individually configured with the TV FLEX worktable to adapt the machine precisely to your requirements. Easy and intuitive programming thanks to the integrated Cad-Cam MAESTRO CNC software. User-friendly operation is ensured by the lowered machine frame, which provides unrestricted access to the worktable at all times. The control cabinet and vacuum pump are integrated into the machine base, and the PRO SPACE variant requires no additional structural safety measures. Robust Construction The supporting structure consists of an especially sturdy monolithic steel base, ribbed for stability and durability. The extra-wide bearing surface is purpose-designed to provide the machine with stability, ensuring constant precision in all working conditions. Anchoring to the floor is not required. The base forms a large, solid foundation for the moving gantry: the working unit is equipped with a balanced, stable, and resilient support, withstanding the highest stress, which ensures superior quality performance and greater accuracy. The moving gantry is a solid single piece anchored to the base, running on high-quality prismatic guides with ball bearing carriages. The working unit is mounted to this and moves along the Y and Z axes on prismatic guides with ball bearing carriages as well. Movement of the lower movable unit (X-axis) and the working unit along the gantry (Y-axis) is driven by a helical toothed rack and pinion system; this produces greater tooth-by-tooth thrust, achieving higher acceleration and increased speed on the X and Y axes. The specially designed helical gearing ensures reduced wear of mechanical components and quieter operation. The vertical Z-axis is driven by a recirculating ball screw, providing perfect balance under dynamic load and withstanding significant acceleration and deceleration. The main milling unit is directly coupled to the Z-axis carriage, enabling superior surface finish quality as vibrations are completely eliminated. Travel along the X-Y-Z axes is achieved with brushless motors powered by static inverters. These provide: - Reduced processing times due to improved acceleration - Increased positioning accuracy due to high-resolution encoders - Elimination of setup tasks at machine startup thanks to absolute encoders Dodpfx Ajx A Dfgjddecr - Elimination of general maintenance tasks, as the brushless system has no brushes Axis movement management and general operation of the working elements...

Condition: used, Year of construction: 2020, Price: On request What are Presale Items at Second Owner? Dodpox Ad R Njfx Addocr Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! - Machine available from: 2025-12-15 - Year: 2020 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 1000040377 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2017, Worktable: X=3100 mm Y=1250 mm (front stop) Y=1415 mm (rear stop) Z=160 mm (thickness) Z=260 mm (clearance height without vacuum cups) Processing spindle 10 kW DRIVE5CS Cardanic 5-axis head for milling, drilling, and sawing Drilling unit V21 High Speed 7500 incl. quick change system and spindle locking Vertical drilling unit Grooving saw automatically swivels 90° Drilling unit H6X Horizontal drilling unit with 6 spindles Drilling unit H4Y Horizontal drilling unit with 4 spindles Tool changer magazine 14 positions at the rear Linear changer fixed laterally, 7 positions Vacuum connection for templates Split vacuum system for pendulum operation (Field A/B) woodWOP Powercontrol with Powertouch Dodpfxoxz Hnhs Addecr Storage location: Customer

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 25167180701, total width: 1,000 mm, total height: 60 mm, feed rate Y-axis: 50 m/min, feed rate Z-axis: 20 m/min, workpiece height (max.): 60 mm, rotational speed (min.): 4,000 rpm, power: 4.5 kW (6.12 HP), air demand: 2,000 m³/h, CNC machining center Manufacturer: Masterwood Model: Project TF 100 2.0 Technical specifications: Axes: X-axis: Max. workpiece length: unlimited Min. workpiece length: 250 mm Travel speed: 0–25 m/min Y-axis: Max. workpiece width: 1,000 mm for all units Min. workpiece width: 80 mm Travel speed: 0–50 m/min Z-axis: Max. workpiece thickness: 60 mm Min. workpiece thickness: 10 mm Travel speed: 0–20 m/min The minimum and maximum workpiece sizes depend on the weight and the length-to-width ratio. Equipment/features: - Air tables in the working area - Roller support at infeed and outfeed - Panel measuring sensor - Ball screw and linear guides - Rack and pinion drive - Centralized lubrication system - Import of DXF files Milling unit: Including Masterwork software extension Spindle speed: 1,000 to 18,000 rpm Motor (frequency-controlled): 3.3 kW Dcjdpfx Ajxz Hgdeddor Includes integrated extraction control (During drilling, only the drilling head is extracted; during milling, only the milling unit is extracted) Drilling head with 16 spindles for 5-sided machining Grooving saw unit Milling unit with 6-position tool changer Includes grooving saw blade, 2 diamond milling cutters, 1 WPL finish milling cutter Provision for CLAMEX and door processing package 2 foldable roller conveyors Milling unit for Clamex connectors Milling unit designed for door processing, for machine with tool changer, complete including special tool change position in changer, angle gear for holding a lock case milling cutter, macro for lock case milling Automatic, program-controlled central lubrication Camera for monitoring

Condition: excellent (used), CNC drilling centre, drilling machine Biesse Skipper V31 Working area: X length: 200 - 3000 mm Y width: 70 - 900 mm Z thickness: 10 - 70 mm Djdpfxoxztm Rs Addocr Milling spindle power: 4.5 kW 10 vertical spindles, 6 horizontal drills (4 drills on X axis, 2 drills on Y axis), Grooving saw on X axis, Machine is in very good condition, drilling unit and axes run quietly, CE marked, Year: 2020, operating hours: 2210 h Weight: 1300 kg, machine dimensions ready for operation: 380 cm x 200 cm h-260 cm, Connection power: 10 kW

Condition: used, Year of construction: 2018, total length: 1,750 mm, total width: 1,800 mm, total height: 1,800 mm, Empty weight: 975 kg What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! Dodpoxzrfrofx Addscr - Year: 2018 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 173180025 - Main motor power [kW]: 3 - Working range X [mm]: 3000 - Working range Y [mm]: 3000 - Working range Z [mm]: 50 - Transport dimensions: 1750mm x 1800mm x 1800mm (l x w x h) - Transport weight [kg]: 975kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2006, Working area X-Y-Z: 5300 x 1700 x 180 mm Travel length X-Y-Z: 6040 x 1810 x 280 mm Drilling head with 30 + 8 spindles Speed: 6000 rpm Power: 2.2 kW Automatic central lubrication Worktable TV with 10 supports L=1500 4 working zones 2 cross lasers Vacuum pump 250 m³/h PC control Windows Vertical milling unit ISO 30 7.5 kW with tool changer RAPID 14 and vector axis Additional drilling unit (E-axis) Dongle for XILOG software Dcedpfx Adsxy Tmzsdjr Location: Nattheim

Condition: used, Year of construction: 2011, Basic machine Stk Volt 400 EU Stk #93.07.31 Series 800 TV working areas 5020x1905 Stk # 52.19.14 8 Matic supports (Y=1825 mm) with 3 basic modules Stk # 52.19.92 for automatic vacuum suction cups Additional basic module for automatic vacuum suction cups Matic Stk # 52.19.99 4 working areas H= 50 Stk # 52.21.63 Front and rear stops H=50- 8 traverse Stk # 52.24.11 Integrated additional stops H=50 mm for 8 traverse Stk # 52.24.15 Central double rail (removable) with 6 stops Stk # 52.24.18 H=50 mm suction cup TV 145 x 30 H50 Stk # 52.18.69 Suction cup TV 145 x 55 H50 Stk # 52.18.70 Suction cup TV 145 x 145 H50 Stk # 52.18.71 8 Posi-Aids H50 Stk # 52.21.66 Group 800 - Electrospindle Prisma K 11 kW Stk # 52.21.80 Drilling head F50L2 (38V-80X-40Y-L0/90°) Stk # 52.22.51 PBTC-On Pos.3 Electrospindle PB+Rapid 6 Stk # 52.21.96 Tool magazine Rapid 12 on board (X,Y-traveling) Stk # 52.22.90 Stk # 52.22.92 Vacuum pump with 250 (300) M3/H50(60) HZ Item # 52.21.97 Dcsdpfx Adjxy Tmnedsr Storage Location: Supplier

Condition: used, Year of construction: 2016, Working area: X=3300 mm Y=1280 mm Z=150 mm Pass-through height. Operator terminal: 24" LED color display. Handheld terminal for controlling axis speeds. Software: "Woodflash". Vacuum pump 90 m³/h, 50 Hz or 108 m³/h, 60 Hz. Milling spindle 12 kW HSK F63 (12,000 rpm). 12-position linear tool changer on the left side of the machine frame + pickup position. Drilling head DH 16 4H 2S: Vertically 12 spindles, horizontally 4 spindles, 2 grooving saws. Storage location: Supplier. Dcodpsxy Tlwsfx Addjr

Condition: used, Year of construction: 2016, total length: 4,300 mm, total width: 1,880 mm, total height: 2,350 mm, Empty weight: 1.310 kg - Year: 2016 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AB/226310 - Transport dimensions: 4300mm x 1880mm x 2350mm (l x w x h) - Transport weight [kg]: 1310kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT Dodsxy Rk Rjpfx Addjcr VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2011, · Working area: 2,550 x 1,067 mm · X-Y travel: 2,980 x 1,450 mm · Z-axis travel length: 150 mm · Clearance height: 120 mm Drilling Unit F14: · Drilling head with 8 + 6 spindles · 5 individually selectable vertical spindles in X · 3 individually selectable vertical spindles in Y · 4 horizontal spindles in X (2+2) · 2 horizontal spindles in Y (1+1) · Speed: 4,000 rpm (6,000 rpm available as an option) · Power: 2.2 kW · Grid: 32 mm · Drill holder: M10 with 11 mm positive fit · Pneumatic feed stroke: 60 mm Grooving saw unit in "X": · Integrated in the drilling head · Grooving saw blade with a maximum diameter of 120 mm Main milling unit: · Tool interface HSK 63F · Speed: 1,500 – 24,000 rpm, infinitely variable via inverter · Motor power: 6.6 kW (9 HP) from 12,000 rpm (S1) · Motor power: 7.5 kW (10 HP) from 12,000 rpm (S6) · Right-/left-hand rotation · Ceramic bearings · Prepared for use with angle drives Tool changer TR10: Automatic lateral tool changer for 10 tools. · Number of tool positions: 10 · Maximum tool diameter: 120 mm · Maximum weight per tool: 4.5 kg · Maximum total tool weight: 28 kg Dcsdpfxjxy Ndis Addsr A central extraction port collects all processing units into a single connection with D=200 mm. This reduces the required extraction capacity to approx. 3,200 m³/h. TVF worktable: The worktable is designed to provide the operator with maximum "freedom of movement." The vacuum quick-clamping system offers maximum flexibility for precise positioning and optimal holding of workpieces. · 4 TVF supports, L=1100 mm, infinitely adjustable in X · 12 TVF vacuum cups 120 x 120 mm, infinitely adjustable in Y · 2 stops in X (1 left / 1 right) · 1 stop in Y per support (total 4 pcs.) · Retractable reference stops controlled via CNC Automatic central lubrication: The correct amount of lubricating grease is distributed via an electronic CNC control unit (X, Y, Z axes) Vacuum system (base machine): · Vacuum pump: 90 m³/h · Power: 2.2 kW · Max. negative pressure (at pump): 0.9 bar PROGRAMMING SYSTEM XILOG PLUS Software features: - Import of DXF files - Import of ASCII files - User interface in operator’s native language Safety devices with bumpers Machine technical data: · Total connected load max.: 18 kW · Recommended fuse: 64 A · Power supply: 400 V 50-60 Hz · Compressed air: 6-7 bar · System pressure (recommended): 8 bar · Compressed air consumption: 200 Nl/min · Central extraction port Ø: 200 mm · Extraction speed: 30 m/sec · Air consumption (central extraction): 3,200 m³/h · Negative pressure: 3,000 Pascal · Weight: approx. 2,500 kg Remote control of machine functions 6 TVF supports L=1,100 mm and 18 vacuum cups 120x120 mm Cross lasers for vacuum cup positioning Two cross lasers mounted on the unit carrier allow for easy positioning of the vacuum cups. Location: Nattheim

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 01-2142-054, travel distance X-axis: 4,200 mm, travel distance Y-axis: 2,100 mm, number of spindles: 17, Nesting machining center with automatic unloading! TECHNICAL DETAILS Travel range X-axis: 4,200 mm Travel range Y-axis: 2,100 mm Dedexx Sltepfx Addjcr Drilling head: 17 vertical spindles Tool changer positions: 6 MACHINE DETAILS Electrospindle power: 9 kW Vacuum pump capacity per pump: 250 m³/h EQUIPMENT Nesting worktable Automatic unloading system with motorized conveyor belt System for printing and applying adhesive labels with labeler Protection and safety system with surrounding fences Safety system with front safety mats Automatic lubrication system Air conditioning for cooling and cleaning the machine control

Condition: good (used), Year of construction: 2013, functionality: fully functional, Working area: X-axis 3,200 mm (support extensions available) Y-axis 900 mm Workpiece handling via collet chuck Automatic workpiece length measurement Drilling unit: 10 individually selectable vertical drilling spindles 6 individually selectable horizontal drilling spindles Grooving saw unit in X-direction Milling unit with 4.5 kW motor, fitted with ER32 collet chuck (no ISO 30 quick-change system) Djdpfx Aexxpmzjddocr BIESSE WORKS EDITOR Second BIESSE WORKS dongle for office workstation

Condition: used, Year of construction: 2023, Technical Data Working Area I.M.S. I.U. Working area X axis 5515 mm (217") Working area Y axis 1620 mm (63¾") Material passage Y 1900 mm (74¾") Material passage Z 250 mm (9¾") Workpiece length for pendulum processing 2600 + 2600 mm (102" + 102") Traverse speed of X-Y axes PRO-SPACE 56 m/min (184 ft/min); Traverse speed of X-Y axes PRO-SPEED 78 m/min (256 ft/min). *For further details, please refer to the corresponding machine layout. With the 5-axis motor, the Y working area increases to 1680 mm (66") for JQX motor, or 1720 mm (67½") for KS/KT motor. Max. loadable panel width during horizontal drilling, spindle oriented vertically only, with no middle reference stops. Installation Data I.M.S. I.U.: Installed power: 23 – 28.5 KVA Electrical specifications: 400 V, 50 Hz, 3 phases Air consumption: 450 Nl/min Compressed air consumption: 4500 m³/h (2650 CFM) Extraction air speed: 30 m/s Extraction port diameter: 250 mm (9.8") Noise level VSA* / LAV*: Drilling 72.2 dB(A) / 74.6 dB(A), Milling 74.3 dB(A) / 80.7 dB(A) Reference standard: EN ISO 11202:1995 *VSA = without load and without extraction *LAV = in operation, with extraction Dsdpfx Adoxwht Dodjcr Location: Nattheim

Condition: used, Year of construction: 2014, BIESSE Bre.Ma VEKTOR 15-13 CNC Drilling and Insertion Machine Art. No. BCDR14530 Manufacturer: BIESSE / Bre.Ma Model: VEKTOR 15-13 Year of manufacture: 2014 Description: The Bre.Ma VEKTOR 15-13 is a vertical CNC-controlled drilling and insertion machine designed for precise machining of panel materials of various sizes. Thanks to its compact design and ergonomic configuration, it ensures top processing quality while requiring minimal floor space. The machine is specifically designed for flexible production requirements—ideal for furniture manufacturers and subcontractors focusing on custom batch sizes. Technical Data: • Model: VEKTOR 15-13 • Year: 2014 • Serial number: BCDR14530 • Control: CNC • Installed power: 11 kW • Air consumption: approx. 200 NL/min • Extraction capacity: approx. 4,500 m³/h • Air pressure: 6–7 bar Dodpfx Adjxwd I Rsdjcr • Workpiece thickness: up to 80 mm • Max. workpiece width: 1,300 mm • Min. workpiece size: 240 × 40 × 8 mm • Turret tool changer: 10 positions • Spindle speed: up to 18,000 rpm • Weight: approx. 2,800 kg Field of Application: Vertical processing of furniture and cabinet components: drilling, milling, grooving, glue injection, and dowel insertion in a single pass. Ideally suited for industrial production lines with automated part handling. Highlights: • Compact design requiring minimal floor space • Superior processing quality due to vertical panel orientation • 10-position turret tool changer (NC-controlled, < 2 seconds) • Laser-based zero-point detection system • Optional integration into production lines with robot systems (ROS) • Full compatibility with Biesse SmartConnection and Sophia IoT system

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, Programmable drilling machine with easy-smart-touch software, 3 controlled axes. Panel handling with triple suction cup. Machine built according to CE regulations. STANDARD EQUIPMENT MAIN UNIT: Head with independent spindles No. 7 vertical lines No. 1 TH1 horizontal double spindle (X-axis) for front/rear drilling Manual panel alignment END PANEL READER for perfect matching Remote assistance software Suction flange Scratch-resistant BRUSH TOP to prevent dust and chip accumulation Working MODE selectable from the operator’s side or in continuous cycle HARDWARE & SOFTWARE 12" touchscreen with MAGGI patented NO TEXT system USB and Ethernet port for file import, online support, and software updates Linux-kernel-based system Fobmsu U Hgiegku S Hepp Dedpfoxwb Tdex Addjcr CNC memory for up to 1,000 programs to buy call: 0031634707163 Almelo

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Working dimmensions of workpeace: - 250 mm - 2400 mm in lenght - 240 mm - 800 mm in weidh - 12 mm-60 mm thickness AGREGAT 2V19 HIGH SPEED 7500 2 vertical drilling units with 19 drilling spindles (individually controllable with variable speed range). Spindle clamping for secure achivement of drilling depth AUTOMATIC GROOVING SAW, 90* PIVOTABLE GLUE APPLICATION UNIT for applying glue into construction drill holes from above. Unit with six glue nozzles nozzles manually adjustable in y direction in a 32 mm grid Glue supply via a glue pump, pressure regulator, glue filter, and cleaning tray for the glue nozzles MACHINE LINKING FOR HOMAG GROUP MACHINES Workpiece transport infeed: Dcsdpfoxvy H Hox Addjr 4-stand timing belt conveyor for workpiece transport, center distance: 3,100 mm -POWERCONTROL SYSTEM - HAND CONTROL UNIT - SOFTWARE WOODWOP 5.5

Condition: good (used), For sale is a fully automatic, computer-controlled woodworking machine for carpentry elements by HUNDEGGER. This is a patented system, recognized as unrivaled on the market, guaranteeing precision, flexibility, and cost-efficiency in both serial and individual production. Planing dimensions 30x30. Dsdpfxoxvnk Hs Addscr

Condition: used, Year of construction: 2007, operating hours: 1,51,620 h, functionality: fully functional, machine/vehicle number: 0-250-04-2835, THE MACHINE IS USED FOR THE PRODUCTION OF PANEL FURNITURE. - LARGE WORKING AREA ALLOWS FOR MACHINING OF LARGER PANELS AND COMPONENTS - FAST AXES, WHICH CAN INCREASE PRODUCTIVITY WITH GOOD PROCESS ORGANIZATION - HIGH-QUALITY VACUUM CLAMPING TECHNOLOGY – SUITABLE FOR PROCESSING PANELS AND FURNITURE - WELL-KNOWN BRAND AND SERIES IN THE WOODWORKING/WOOD PROCESSING INDUSTRY, MAKING IT EASIER TO FIND SPARE PARTS AND SERVICE Dcsdpexuhlnjfx Addor

Condition: like new (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 6610231000922, Fully functional CNC drilling machine (like new). Dsdpfx Aoxt Na Reddscr