Natriks MB

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, CNC lathe Okuma LU 3000 EX 2ST-600, 224198 Control: OSP-P300LA Year of manufacture: 09/2019 Internal machine number: 85 Turning length: 600 mm Maximum turning diameter: 410 mm Swiveling diameter over bed: 580 mm Spindle speed: 50 - 5,000 rpm 2 tool turrets A-turret: 12 tool stations B-turret: 8 tool stations Equipment / accessories: - Chip conveyor - One Touch IGF Crodpfx Aj Ah Sateizoi - Blum 3D measuring probe tool monitoring system - Reinforced coolant pump, 80 bar, Interlit Drum filter with additional water tank and high-pressure pump, 80 bar - Hainbuch clamping chuck, Kombi 100 - Automatic door - Touchsetter

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, CNC lathe Okuma LU 3000 EX 2ST-600, 224197 Control: OSP-P300LA Year of manufacture: 06/2019 Internal machine number: 84 Turning length: 600 mm Maximum turning diameter: 410 mm Swiveling diameter over the bed: 580 mm Spindle speed: 50 - 5,000 rpm 2 tool turrets A turret: 12 tool stations B turret: 8 tool stations Equipment / Accessories: - Chip conveyor - One Touch IGF - Tool monitoring system Blum 3D measuring probe - Reinforced coolant pump, 80 bar, Interlit Crodps Ah R Rrefx Aizei Drum filter with additional water tank and high-pressure pump, 80 bar - Hainbuch chuck combination 100 - Door automation - Touch setter

Condition: used, Year of construction: 2009, XYZ Proturn SLX 1630 (2009), 400mm Swing Over Bed, 216mm Swing Over the Cross-slide, 760mm between Centres, 54mm Spindle Bore, 2500rpm Spindle, 5.75kW Spindle Motor, Prototrak SLX Control, 3 Jaw chuck, QCTP, Tailstock, Coolant. Machine Weight: 1530kg. Country of Origin: United Kingdom Location: These lots are located in Leicester and Coventry, UK. Please see individual lot for dismantling and loading charges. Cjdpfx Aio Ah E T Iezjri

Condition: used, Year of construction: 2012, XYZ Prototrak LPM Vertical Machining Centre (2012) Traverses X Y Z: 785 x 470 x 530mm, Table Size 900mm x 500mm, Spindle Speed 8000rpm, Spindle Motor Power 11kW, Prototrak, Rapid Feed XYZ Axis 20m/min, Spindle Taper BT40, 16-Station ATC. S/No. M7161, Machine Weight: 4200kg. Country of Origin: United Kingdom Cjdpo Ah E Dxjfx Aizeri Location: This lot is located in Leicester, UK. A charge of £200 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: used, Year of construction: 2001, turning diameter 400 mm turning length 549 mm control HEIDENHAIN Eltropilot swing over bed 570 mm travel -x axis 220 mm travel -z axis 635 mm main spindle bore 79 mm main spindle speed 25 - 5000 U/min main spindle drive 21 kW max. torque on the spindle max. 240 Nm 120 mm c-axis, speed 100 U/min C-axis Haltemoment 200 Nm C-axis resolution < 0,04 ° sub spindle bore 56 mm sub spindle speed 25 - 5000 U/min sub spindle drive 9 kW max. torque on the spindle max. 72 Nm 90 mm c-axis, speed 100 U/min C-axis Haltemoment 150 Nm C-axis resolution < 0,04 ° feed power X/Z axis 3,5 / 7 Nm rapid traverse X-axis 20 m/min rapid traverse Z-axis 24 m/min tool turret 1 x 12 Stationen number of driven tool stations 12 speed of driven tools 4.000 U/min total power requirement 44 kVA Accessories: collet fixture HAINBUCH on main spindle, 3-jaw chuck RÖHM, 140 mmø, on sub spindle, Crsdpfx As Ah Eb Tjizei 3 collets, chip conveyor, coolant with band filter device

Condition: used, Year of construction: 1999, turning diameter 450 mm turning length 380 mm control Seicos 40L Multi max. machining diameter 340 mm Bar feed 51 mm turning speed range - spindle 30 ~ 5.000 U/min drive capacity - spindle motor 11 / 7,5 kW spindle nose A2-6 Codpfs Ahzhyjx Aizsri spindle bore 59 mm bearing diameter 100 mm travel -x axis 215 mm travel -z axis 400 mm turret (x-stations) 16 feed 0,001 ~ 500 mm/min rapid traverse X/Z: 30 m/min Shank diameter 25 x 25 mm Drill shank diameter 40 mm taper of center MK 5 tailstock adjustment 300 mm total power requirement 23 kVA weight of the machine ca. 4,6 t dimensions of the machine ca. 5,5 x 2,8 x 2,2 m CNC Lathe HITACHI SEIKI - HiTec-Turn HT 20 RIII

Condition: good (used), Year of construction: 2002, Ref. -No.: 10434 Manufacturer: OKUMA Type: LC 40 Year of construction: 2002 Type of control: CNC-Steuerung Control: FANUC 18-i TB Storage location: Halberstadt Country of origin: Germany Turning Speeds: 10 - 2.800 RPM Bar passage: 91 mm Chuck diameter: 450 mm Tailstock - diameter: 120 mm Turning Diameter: 550 mm Turning Length: 800 mm Swing Diameter: 800 mm Spindle passage: 90 mm Csdpfxs Ahmuto Aizsri Spindle nose: A2-8 Tailstock Quill Stroke: 150 mm Total Power Requirement: 44 kW Weight Of The Machine Ca.: 8 t Number of tool stations: 12 pc

Year of construction: 2017, condition: used, spindle speed (max.): 5,000 rpm, turning length: 500 mm, CNC Lathe Manufacturer: DMG MORI Model: CTX beta 500 Year of manufacture: 2017 Control system: Heidenhain CNC-Pilot 640 Crodj Ahkf Sjpfx Aizei Technical specifications: Turning length: 500 mm Spindle speed: 5,000 rpm Drive power - main spindle: 100/40% duty cycle (ED) 25/34 kW Tool interface: VDI 30 Number of tool stations: 16 positions Spindle operating hours: approx. 3,528 h Condition: used Accessories, tools, and work-holding devices shown are included in the scope of delivery only if explicitly stated in the additional information. Subject to changes and errors in the technical data and specifications; prior sale reserved!

Year of construction: 2017, operating hours: 29,259 h, condition: used, spindle speed (max.): 5,000 rpm, turning length: 500 mm, CNC Lathe Manufacturer: DMG MORI Type: CTX beta 500 Year of manufacture: 2017 Control system: Heidenhain CNC-Pilot 640 Crsdpj Ahkfnefx Aizoi Technical data: Turning length: 500 mm Spindle speed: 5,000 rpm Drive power - main spindle: 100/40% duty cycle (ED) 25/34 kW Tool interface: VDI 30 Number of tool stations: 16 positions Operating hours: approx. 29,259 h Spindle hours: approx. 7,351 h Condition: Used Technical features & accessories: - C-axis and spindle brake (hydraulic) - Y-axis ± 60 mm - Programmable tailstock - Hydraulic hollow clamping device, Ø 77 mm - Differential pressure clamping for the main spindle - 16-station disc-type turret, driven tools for all 16 stations - Coolant system 8/20 bar - Belt filter unit (filtration fineness 40 µm) - Level monitoring - Connection port for oil mist separator - Coolant spray gun - TurnPlus Accessories, tools, and work-holding devices shown are included in the scope of delivery only if explicitly stated in the additional information. Subject to changes and errors in the technical data and specifications; prior sale reserved!

Condition: excellent (used), Year of construction: 2002, spindle bore: 90 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 315 mm, travel distance Z-axis: 1,350 mm, spindle motor power: 36,000 W, total height: 2,600 mm, total length: 4,200 mm, total width: 2,300 mm, overall weight: 8,000 kg, CNC Lathe with c-axis DMG MORI - CTX 520 Linear MACH-ID 9890 Make: DMG MORI Type: CTX 520 Linear Control: SIEMENS 840D YOP: 2002 Max. turning Ø: 440mm X-Axis: 315mm Z-Axis: 1350mm Spindle bore: 90mm Speedrange: 4000Rpm Spindle power: 36kW ATC / revolver: 12 B-Axis Toolsystem:VDi-40 Chip conveyor: Yes Pinole taper: 5Mk Stroke pinole: 120mm Length: 4200mm Width: 2300mm Height: 2600mm Weight: 8000kg Credpfx Aij Ahgqcezei Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 16212-51, turning length: 1,300 mm, turning diameter: 400 mm, spindle motor power: 68 W, total height: 2,900 mm, total length: 6,391 mm, total width: 2,495 mm, overall weight: 12,000 kg, Equipment: documentation/manual, For sale is a CNC lathe, GF Georg Fischer lathe FMS NDL-40/130, with Siemens 840D control, including 2 additional chucks. Max. workpiece diameter: 400 mm Max. workpiece length: 1300 mm Selling price ex works Condition: Good condition, the machine is powered and can be tested. Upon request, I can also send a current video demonstrating the most important functions. Important terms of sale (B2B only): The sale is exclusively to commercial enterprises. By submitting a bid or making a purchase, you confirm that you are acting as an entrepreneur within the meaning of § 14 BGB. Exclusion of liability: The sale is made with the exclusion of any liability for defects in materials and workmanship. Warranty: No warranty or guarantee is provided. Returns: No returns or exchanges are permitted. Liability for damages resulting from injury to health, body, or life, as well as from gross negligence and/or intentional breaches of my obligations as a seller, remains unlimited. Permitted delivery area (EU internal market only) Crjdpe Agrhdsfx Aizoi The sale and transfer of ownership of this machine are exclusively to commercial buyers with a registered office and delivery address within the European Union (EU). A sale to third countries (e.g., Switzerland, the United Kingdom, the USA) is excluded. A valid VAT identification number (VAT ID) must be provided for invoicing.

Condition: used, Year of construction: 2005, type of input current: three-phase, We offer a used Haas SMINIMILL HE CNC lathe, built in 2005. Manufacturer: Haas Automation, Inc. Model: SMINIMILL HE Serial number: 41201 Cedpfx Ae Agcwhsizjri Date of manufacture: 4/05 Voltage: 360–480 V Phase: 3 Frequency: 50/60 Hz Full-load current: 20 A Largest load current: 35 A Short-circuit interrupting capacity: 10000 A Wiring diagram: 96 / 8100 If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: not inspected (used), Year of construction: 2004, functionality: unexamined, machine/vehicle number: 01360000541, turning length: 600 mm, turning diameter: 320 mm, spindle bore: 87 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 230 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 30 m/min, total height: 2,300 mm, total length: 4,000 mm, total width: 2,000 mm, quill diameter: 120 mm, quill stroke: 150 mm, overall weight: 5,000 kg, controller manufacturer: HEIDENHAIN, controller model: CNC PILOT 4290, input voltage: 400 V, input frequency: 50 Hz, input current: 80 A, nominal power (apparent): 44 kVA, tailstock quill stroke: 580 mm, operating hours of spindle: 22,794 h, GILDEMEISTER CTX 400 C CNC turning machine - Swing diameter: 505 mm - Swing diameter over X-axis: 365 mm - Bar capacity: max. 65/75 mm - Spindle diameter in the front bearing: 130 mm - Chuck diameter: 200/250 mm - Drive power: 21 kW - incl. C-axis - Speed: 200 rpm - Positioning accuracy: 0.04° - Ball screw X/Z: 32 x 10 mm Credpfxj Afutdj Aizji - Feed force X/Z: 4/6 kN - incl. 12-position tool changer - Number of driven tool stations: all 12 - Shank diameter: VDI 30 - Tool disk, axial tool mounting: pitch diameter: 340 mm - incl. tailstock, tailstock travel: 580 mm - Center height: MK 4 - incl. additional driven VDI 30 tool holders – compatible with the machine - with chip conveyor and documentation The machine is equipped with a tailstock, a 3-jaw chuck, diameter: 200 mm, and a 12-position tool turret, VDI 30. FCA D-94227 Zwiesel - loaded onto a truck.

Condition: not inspected (used), Year of construction: 2011, functionality: unexamined, machine/vehicle number: 01620006501, turning length: 650 mm, turning diameter: 350 mm, spindle speed (max.): 4,500 rpm, travel distance X-axis: 255 mm, travel distance Z-axis: 800 mm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, total height: 1,800 mm, total length: 4,500 mm, total width: 2,200 mm, overall weight: 3,000 kg, bar passage: 65 mm, controller manufacturer: HEIDENHAIN, controller model: CNC PILOT 620, input voltage: 400 V, input frequency: 50 Hz, input current: 35 A, nominal power (apparent): 21 kVA, operating hours of spindle: 10,771 h, DMG NEF 400 CNC lathe - Swing diameter over bed: 385 mm - Max. swing diameter over carriage: 350 mm - Distance between centers: 805 mm - Z-axis travel of tailstock: 680 mm - Height of spindle flange from ground: 1000 - 1010 mm - Diameter of spindle flange: 170 H5 mm - Diameter of chuck: 200/250 mm - Diameter of spindle bore: 87 mm - Diameter of draw tube: 67.5 mm - Diameter in the front bearing: 100 mm - Incl. C1 axis, speed: 200 rpm - Feed force in X/Z axis S1: 4.5 / 6.2 kN - Feed force X/Z axis S6: 6 / 8.5 kN - Ball screw X/Z axis: 32 x 10 mm - Diameter of tool holder: VDI 30 - Number of tools: 12 pieces, of which 6 are driven Crsdpfo Afun Isx Aizsi - Tool shank: 20 x 20 mm - Tailstock travel: 680 mm - Max. feed force: 680 daN - Morse taper: MK 4 The machine is equipped with a tailstock, a SAUTER turret, and a three-jaw chuck from the manufacturer SCHUNK, jaw width: 210 mm, with hydraulic clamping, including various VDI 30 tool holders, some driven and some standard, some fitted with lathe accessories, as well as a chip conveyor and documentation. FCA D-94227 Zwiesel - loaded onto a truck.

Condition: good (used), Year of construction: 2012, turning diameter 400 mm turning length 650 mm control Siemens 840D SL x-travel 275 mm z-travel 700 mm spindle turning speed range 4000 U/min spindle bore 65 mm turret (x-stations) 16 Pcs. VDI30 tailstock quill taper MT 4 swing dia. 600 mm Tools speed 5000 U/min total power requirement 37 kW weight of the machine ca. 5,5 t dimensions of the machine ca. LBH 2,5 x 1,6 x2,0 m Cjdpfo Afp D Rsx Aizeri - C-axis - 3 driven tools - 4-jaw chuck (Röhm, 250 mm) - Renishaw measuring arm - Chip conveyor - Interface for bar loader - Siemens ShopTurn - Documentation

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, turning diameter over cross slide: 230 mm, turning length: 1,000 mm, turning diameter: 420 mm, rotational speed (min.): 10 rpm, rotational speed (max.): 3,000 rpm, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, We are offering this well-maintained and very well-preserved VDF Boehringer DUS 400 TI CNC lathe, manufactured in 2003. It functioned excellently up until its shutdown in August and is in first-class condition, apart from some paint damage. It is being sold solely due to the closure of our business. • Spindle motor power: 11 / 9 kW • Control system: SIEMENS 840D • 3-jaw wedge-bar chuck (RÖHM Duro T200) - retrofitted in 2019 • Control system: SIEMENS 840D Cjdo Acdwgepfx Aizjri • Coolant tank (emulsion) A quick-change system is installed, and many tool holders with tools are included in the scope of delivery. Additionally, a collet chuck for the spindle and drill chucks and ball centers for the tailstock are included, as well as some spare indexable inserts. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2023, controller manufacturer: Siemens, controller model: 828D - ShopTurn, _____ Description: Year of manuf. : 2023 Control : Siemens 828D - ShopTurn Turning diam. : 405 mm Turning length : 956 mm Main Spindle: Technology:Belt-driven spindle Speed (max.):3,000 rpm Power (max.):26 kW Credpfx Ae Aau T Hoizsi Bar capacity:91 mm Workpiece clamping:3-jaw chuck, SAMCHULLY HS-12 Tool holder: Technology:12-station turret Tool holder:BMT65 Tool drive:5,000 rpm Travel in X/Y/Z:215/-/560 Main Spindle: Technology:Trailed tailstock Stroke:100 mm Quill diameter:110 mm Taper:MT5 Main Spindle: Chip Management:Chip Conveyor Coolant Management:IKZ Pump with Oil Skimmer and High Pressure, 10 bar Tool Measurement:Automatic Measuring Arm Automation:Prepared Finished Part Removal:Part Catcher with Collection Box Setup Mode:Electronic Handwheel

Condition: used, Year of construction: 1998, functionality: fully functional, Equipment: documentation/manual, Colchester Tornado Turning Center 3 Axes: X, Z, Y Model: Tornado 80 CNC: GE Fanuc Series 21i-T Year: 1998 Codez S U Euspfx Aizjri Tornado Bar Feeder Colchester Model: MBF 1000

Condition: used, Dugard Eagle 300 Crodpfoz S Ah Dex Aizei Fanuc control 381mm 3 jaw chuck 77mm bore chip conveyor 10 station turret 700mm between centres

Condition: used, Year of construction: 2018, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Doosan Turning Center 2 Axes (X, Z) Csdpfx Aisz St Tqjzori Model: Puma GT2100B Year: 2018 CNC: Fanuc CE Certification Chip Conveyor: Operational ✅ Documentation: Available ✅ Chuck: Operational ✅

Condition: used, Year of construction: 2010, operating hours: 11,658 h, travel distance X-axis: 150 mm, travel distance Z-axis: 470 mm, CNC Lathe Manufacturer: CMZ Model: TC 25 BTY Year of manufacture: 2010 Control system: FANUC Series 31i-Model A Technical details: X-axis: 150 mm Z-axis: 470 mm Number of tool stations: 16 positions Operating hours: approx. 11,658 h Condition: Used Technical features & accessories: - 360° C-axis - Chip conveyor - Filtration system Accessories, tools, and work-holding devices shown are included in the scope of delivery only if explicitly stated in the additional information. Subject to modifications, errors in technical data and specifications, Csdpfjz St S Tex Aizjri and prior sale!

Condition: good (used), Year of construction: 2007, Turning diameter 330 mm Turning length 508 mm Spindle speed 3,400 rpm Tool holder VDI 40 Distance between centers 610 mm Turning diameter over the bed 585 mm Turning diameter over the cross slide 241 mm Travel - x 214.6 mm Travel - z 508 mm Bar diameter 63 mm Total power consumption 15 kW Machine weight approx. 4,100 kg Total power consumption 15 kW Dimensions 2800 x 1800 x 1800 mm Equipment: - Bar feeder 1.5 m Servo Bar 300 - 3-jaw chuck - Collet chuck Csdpfx Ajz Stgqjizori - Tailstock - Various holders

Condition: used, Year of construction: 2006, functionality: fully functional, turning diameter over cross slide: 270 mm, turning length: 650 mm, turning diameter: 400 mm, spindle bore: 65 mm, spindle speed (max.): 4,000 rpm, rotational speed (max.): 4,000 rpm, overall weight: 2,800 kg, Equipment: documentation/manual, CNC Lathe DMG GILDEMEISTER NEF 400 TECHNICAL DATA: • Year of manufacture 2006 • Turning length max. 650 mm • Swing over bed max. 400 mm • Swing over cross slide max. 270 mm • Control FANUC 210i • Spindle speed max. 4 000 rpm • Bar capacity max. 65 mm • Tool turret 8 stations (VDI 30) • Tailstock MT 4 • USB • Technical documentation • Machine dimensions approx. 2.1 x 1.8 x 1.7 m • Weight approx. 2 800 kg Crodpsz Nyucjfx Aizsi Machine in very good technical condition, the spindle runs quietly – it has been completely overhauled and has 0 operating hours. The lathe is connected to power and can be inspected and tested on site by prior appointment. Professional loading is included in the price, and we can also help you organise transport within the EU. Accessories, tooling and clamping devices shown in the photos are part of the offer only if listed under equipment. Technical data is for reference only and may contain inaccuracies. Subject to prior sale.

Condition: not inspected (used), Year of construction: 1989, 2 UNITS X , 10:13:00] Saeid Khodaparast: CNC lathe YAM CK-3A (1989) at auction. FANUC series O-T control, approx. 6,647 operating hours, footprint approx. 4400 x 1800 x 2600 Length between centres: 900 mm • Turning length: 800 mm • Diameter above the bed: 550 mm • X-axis travel: 380 mm Credpjz I Ed Ssfx Aizoi • Spindle bore: 91 mm • Maximum workpiece weight: 900 kg WHATS APP

Condition: excellent (used), operating hours: 8,640 h, Maximum height 260 mm Turning length 600 mm Maximum turning diameter over the bed cover 400 mm Maximum turning diameter over the compound slide 225 mm Cross travel 260 mm Longitudinal travel 660 mm Spindle head DIN Size 140 h5 Spindle bore 68 mm Speed range 25 – 4000 rpm Cjdpfxsz Icuzs Aizori Feed range, longitudinal and cross 0.5 – 5000 mm/min Rapid traverse, longitudinal and cross 9 m/min Taper in spindle MK 4 Tailstock quill stroke 100 mm Main drive 22 kW Dimensions L x W x H approx. 3600 x 1720 x 1650 mm Weight 3200 kg Accessories / Special features: • CNC control GILDEMEISTER EPL 2 • Electronic handwheel • RS 232 interface • Manual 3-jaw chuck, diameter 200 mm • 12-station tool turret, manufacturer SAUTER, internal coolant supply, VDI 30, tool holder bore Ø 30 mm, DIN 69880 • Swiveling chip conveyor with coolant system • Electric foot switch for hydraulic 3-jaw chuck and hydraulic tailstock quill • Various tool holders • Lighting Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany