Stolwit Group

Condition: new, Year of construction: 2026,

Condition: used, Year of construction: 1999, functionality: unexamined, Schmidler S4 Joinery Line - 4-strand transverse infeed conveyor (inclined upwards) - Infeed roller conveyor - Edge turning device integrated in the infeed roller conveyor - Zero point detection - Electronically controlled under-table swing cross-cut saw Saw blade diameter: 710 mm Swivel angle: 360 degrees Tilt angle: 0–65 degrees - Waste wood pusher - Marking pen, horizontal (from below) and vertical (from behind) - Universal milling unit incl. finger-joint cutter and dovetail milling head - Horizontal drilling unit – rafter nail drilling device - Vertical drilling unit - Vertical profiling mill (lower position) for internal radii - Powered outfeed roller conveyor - Pneumatic push-off ruler - Transport and measuring system - Control system incl. color display Maximum workpiece dimensions: Height: 300 mm Width: 400 mm Kedpfx Asya Dc Iedwedg Length: approx. 12,000 mm 4-Side Planer – Schmidler Minimum workpiece dimensions: Height: 30 mm Width: 50 mm Feed speed: 9/18 m Planer shaft diameter = 140 mm 4-sided chamfering unit Infeed roller conveyor Outfeed roller conveyor with push-off ruler and storage rods Machine in good used condition, fully operational and in use. The machine can be inspected by appointment. Available for sale immediately or by arrangement.

Condition: excellent (used), Hundegger K2 Industry 5-Axis CNC Timber Joinery Machine 5-axis machining capabilities – Maximum machining section: 300 x 620 mm Machining operations: Section probe detector, section measurement – Cutting: All straight cuts and any angle, horizontal and vertical, birdsmouth, valley and hip rafters, rebates, half-lap joints, chamfering, groove, straight and angled birdsmouth groove, web notch – Milling with aggregate head (hogging head) and other milling cutters, mortise and tenon, mortises, notches, scarf joints, dovetail joints (straight and angled), Gerber scarf – Drilling: straight and angled, deep-hole drilling – 1x side drill and 1x underside drill. Ink marking system – Piece identification labelling Control console and software: The control system allows importing data from CAD software and automates the calculation of complex machining operations. Work is currently performed with CADWORK software (not included in the sale of the machine). The machine features a pit designed for the elimination of wood waste and sawdust. Kjdpfsx U Ti Uex Adwjdg This HUNDEGGER K2 CNC is fully upgraded and refurbished! Dimensions: - Machine: Length 22,900 mm x Depth 5500 mm x Max. height 2550 mm (on the floor) - Waste pit: approx. Length 12,000 x Width 2,400 x Depth 950 mm - Timber feeding length: 13,000 mm - Max. timber output length: 13,000 mm - Transverse infeed conveyor: 5 chains, 2,200 mm - Extendable timber support table - AQF feed chain with shaft extension, 2,900 mm - Under-table pivoting crosscut saw - Right-hand safety flap Waste evacuation system located below – Control for waste extraction system – Universal 5-axis milling unit with profiling tool, dovetail cutter, multiple finger joint cutter, combined vertical tool holder, drilling unit, finger joint cutter, combined horizontal tool holder, rebate unit / Drilling unit 1 and 2 – Marking device – Pneumatic beam turn-over station – Outfeed table with 7 arms Year of manufacture: 2003 Purchased by current owner in 2020. Machine was fully reconditioned in 2020: electrical, mechanical, pneumatic, tooling, and IT systems (dismantling parts and motors, replacement of bearings, hoses, cables, guideways, IT update and EKP data export, cleaning, new tooling in 2020) The machine is in very good technical and visual condition.

Condition: excellent (used), Year of construction: 2013, feed length X-axis: 13,000 mm, saw blade diameter: 800 mm, working length: 13,000 mm, Equipment: safety light barrier, We are offering this very well-maintained Hundegger K2i-625 (UF5) joinery machine, year of manufacture 2013. Fully automatic wood infeed with feed roller conveyor and loading & infeed transporters Under-table swiveling crosscut saw 11 kW Universal 4-axis milling unit (UF4) Combined support for vertically operating tools Drilling unit 2.2 kW – drilling direction vertical Combined support for horizontally operating tools Drilling unit 2.2 kW – drilling direction horizontal Kdsdpfx Adex Trlleweg Fully automatic hydraulic beam turning station Transport and positioning system "two-hand operation" incl. machine frame Electronic control with EKP software Refined machine surface Extension of the cross conveyor and feed roller conveyor for timber lengths up to 13 m 5-axis universal milling unit – UF5 (surcharge for 4-axis) Drilling unit 2.2 kW – drilling direction horizontal Front marking unit (operator side) InkJet 4 HP system on the stop side Remote maintenance (incl. portable video camera) Control unit for waste removal with operating buttons Extension of roller conveyor on the output side Spare saw blade 800 mm Dovetail cutter 60x3 Bx16, 5 mm (with reversible blades) If you have any questions or require further information, please feel free to send us a message or call us.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, working width: 450 mm, Equipment: safety light barrier, TECHNICAL DETAILS Kdedpex I A A Dsfx Adwog Working width: 450 mm (limited processing up to 520 mm possible) EQUIPMENT - Safety light barrier - Saw - Universal milling unit with roller cutter - Dovetail cutter - Finger joint cutter - Drilling units: 1x horizontal + 2x vertical - Slotting device - Marker on stop side - Automatic beam turning station - Wood length is now processed in the feed up to 16m - Control computer with EKP program included

Condition: good (used), Sls 280 joinery saw, pneumatic, with rotary table and roller conveyors Kodpfxox Il Rwj Adwodg

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 1779, The K1 was rebuilt in 2020 and equipped with the latest safety features. It is now dismantled and can be loaded immediately. Kjdpfxsx Ehmas Adwsdg

Condition: used, Year of construction: 2006, functionality: fully functional, Hundegger K2 450 Joinery Machine (UF5) with good equipment, well-maintained and reliable. For sale is a Hundegger K2 joinery machine in good, regularly serviced condition. The machine comes from a well-kept operational environment and has always been properly maintained and cleaned. Manufacturer: Hundegger Model: K2-450 (UF5) Year of manufacture: 2006 Equipment: - Machine length: 11.76 m - Infeed: 8.51 m - Max. timber length infeed: 14.5 m - Max. timber length outfeed: 13.0 m - Colour: RAL 5012 blue - Infeed cross conveyor: 6 strands, horizontal, 2.2 m with flat bar chain - Infeed strand with shaft extension 2.2 m - Extendable timber outfeed - Under-table swiveling cross-cut saw - Alternative disposal via bin - Control for disposal device - Universal 5-axis milling unit UF5 - Roller cutter - Finger jointing cutter - Dovetail cutter - Combination support for vertically working tools - Drilling unit 2.2 kW - Drilling unit 3.0 kW - Finger jointing cutter Kedpfx Aox Azrkodwjdg - Combination support for horizontally working tools - Drilling unit 2.2 kW - Swiveling drilling unit - Slotting unit, 900 mm, double-sided guide - Longitudinal and cross-groove milling unit - Marking and labeling device integrated in table - Hydraulic beam turning station - Roller conveyor with pusher, 5.30 m - Network connection Available from: Autumn 2026 Location: Austria Price: on request All information subject to change; prior sale reserved. Sale ex location. No warranty or guarantee. Inspection and test run available by arrangement. If interested, just get in touch – we are happy to answer any further questions.

Condition: used, Year of construction: 2010, functionality: fully functional, CNC Production Line for Log Construction FORMA MBL The FORMA MBL CNC line is designed for speedy and high-precision machining of wall elements for both glulam and solid log houses. The system operates on Cadwork (IFC-based) software. Material Capacity • Beam thickness: 120–240 mm • Beam height: 120–240 mm • Maximum workpiece length: 7.5 m The line is equipped with a hydraulic lifter and an automatic infeed system for efficient and continuous material handling. Kjdpfexyf Evjx Adwodg Processing Capabilities Drilling Operations • Vertical drilling for electrical conduits, dowels, and threaded rods • Horizontal drilling for electrical wiring, switch boxes, and socket recesses Corner Joint Machining Modules • Dovetail corner joint module • Cross corner joint module Sawing Modules • Horizontal saw unit for beam splitting and machining of window and door openings • Vertical cross-cut saw unit for trimming and end-cutting components Milling Operations • Electrical channel milling (cable grooves) • Sliding-beam milling for window openings Additional machining functions are illustrated in the attached graphic and photo documentation.

Condition: used, Year of construction: 2015, A very high quality German designed and built spindle moulder from leading manufacturer Martin. The machine although compact in design has a number of premium features as standard including the heavy composite frame to ensure maximum stability along with the 5.7" TFT colour touch screen control unit. This is positioned economically at eye level and helps reduce set up times markedly. From this unit the operator can easily set the required height of the spindLE. In addition the tool data memory gives the facility to store up to 500 different tools, automatically recalling the spindle height position, speed and other program data for the particular tool selected. Other standard features include a precision fence assembly, with hand wheel adjustment and digital display in the control unit, electronic soft braking device for the spindle motor and 'Dornfix' quick shaft change system Specification - Heavy duty basement for maximum stability and precise machining. - Precision ground cast iron table. - Overhead user friendly graphic colour touch screen control unit. - Heavy duty fence assembly with precision movement - movement by hand wheel - 1 off 11/4" dia spindle shaft (140mm working length) - SK40 'Dornfix' quick change system. - 7.5hp motor - 3000,4500,6000,8000 and 10,000 spindle rpm. - Centralised lubrication. Complete with following options: - Table extensions to both sides giving overall length of 2200mm with extendable workpiece support bar 3000mm overall length. - Integral fence plates - Digital display of fence plate right on control screen with adjustment by handwheel (instead of just normal scale rule). - Cast iron console for feed support Kdedpoxx Upnefx Adwsg - Comfort feed support arm with quick rise / fall by handwheel with mechanical display of height position. Heavy duty cast iron brackets and large steel clamping levers to ensure feed unit is securely locked in required position. - Feed unit variomatic 3 roller with variable mechanical feed speeds of 3 to 17m/min. On / off buttons for the feed unit integrated in to the control panel. - Centrex cutter guard in Lieu of standard CPS guard.

Condition: used, Year of construction: 2021, Dimensions of the blocks:​ Kdsdexxw U Hopfx Adwsg Length : 114 mm [4.5 in] to 914 mm [36 in] Width : 38 mm [1 1/2 in] to 203 mm [8 in]​ Thickness : 16 mm [5/8 in] to 63 mm [2 1/2 in] ​ Production Input : Up to 200 lugs per minute Output : Up to 15 press cycles per minute

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, Blockhouse milling machine BL100A, completely overhauled with factory warranty For log thickness up to 140mm, construction height up to 200mm, machining length up to 9.0m • Infeed table (timing belt cross conveyor) and entry table for timber length 9m • Blockhouse milling machine BL100A – 4-side milling machine with hydro-pneumatic feed, 2x4kW / 2x3kW for cross-section approx. 140x220mm • Carbide insert tools for wall thickness approx. 40 – 100mm included • End groove milling unit 3.0kW with cutter B=21-40mm Kdsdpfx Adoxxhwlswog • Drilling device with drill guide and drill bit D=20mm • Integrated under-table crosscut saw 4.0kW, saw blade D=500mm • Workpiece clamping pneumatic, with horizontal clamping jaws • Outfeed table 9m with pusher device and material storage table 6x1.5m • Servo slider positioning system with IPC control and IITO control software • Label printer for component marking, laser printer for production list printouts • Excellent condition, factory-refurbished and fully serviced, with parts warranty, ready for operation • Price & delivery time on request. Subject to prior sale and all rights reserved

Condition: like new (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 12762, cutting height (max.): 300 mm, Fully automatic wood infeed Infeed roller conveyor Infeed and loading cross conveyor Under-table pivot cross-cut saw 11 kW 5-axis universal milling unit – UF5 Combination support for vertically operating tools Drilling unit 2.2 kW – vertical drilling direction Combination support for horizontally operating tools Reinforced drilling unit (3.0 kW) horizontal drilling direction Slotting unit 7.5 kW Rear marking device (on the stop side) Fully automatic beam turning station, hydraulic Transport and positioning device "two-hand system" Electronic control with Hundegger production software Roller conveyor for wood outfeed with ejector 5-arm timber rack Safety devices and guards Refined machine surface Extension for infeed cross conveyor Infeed roller conveyor for timber length 13 m 5-axis universal milling unit – UF5 Revolver milling unit – vertical from above Remote maintenance possible Control cabinet special arrangement Control unit for extraction with operating buttons Kdodpfxsxxa Dwe Adwjg Extension roller conveyor 7.10 m without drive Raising and lowering safety baffle plate

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, For sale: CORALI line for the production of thin-walled box bottoms. A complete CORALI line is offered, including: Debarking machine, veneer manufacturing machine, conveyor for automated assembly of thin-walled box bottoms. Specifications: Debarking unit output: 🔹 3–6 m³ with log length 850 mm 🔹 26–30 m³ with log length 550–650 mm (per 8-hour shift). Line capacity: 🔹 6,300–10,500 bottoms (veneer thickness 4 mm) 🔹 8,100–15,500 bottoms (veneer thickness 1.4 mm) Kdodpoxv St Ssfx Adwjg

Condition: new, functionality: fully functional, Equipment: CE marking, SRB - Vranje Construction Project specializes in the production of complete pelletizing equipment with capacities from 500 kg/h up to 6 t/h. We manufacture the following: Boilers Dryers Silos Mixer with conditioner Mill Pellet cooler Presses Conveyor belts Mixers Kedpexqd T Hofx Adwedg Dedusting systems Crushers All our equipment comes with a 1-year warranty. 24h service support We offer the following services: Equipment installation Diagnostics Servicing Line maintenance Staff training Commissioning All inquiries and requests can be sent by email or by phone on working days from 09:00 to 17:00.

Condition: excellent (used), USED MACHINE - V380/50 - "CE" Code: CAL-052 _ _ _ Working width: 1100 mm 1st group: steel roller 2nd group: rubber roller Kedjxp Ecyepfx Adwodg 3rd combined group: roller/pad Motor power: 2 x 15 kW

Condition: used, 60-pocket suction filter with 5 bags, complete with 9 kW suction unit and control panel, used. Kedsxlb Sispfx Adwedg Height when assembled: 3.65 meters

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Hundegger Speed Cut SC1 CNC Kdodpfsxftaljx Adwjg 2005 vintage, in good technical condition, looking for a new owner. Excellent for the production of nailed sheet metal roofs. Videos show the machine in operation.

Condition: ready for operation (used), functionality: fully functional, Automatic hydraulic press with GANG–NAILS connectors for trusses. Hydraulic press for pressing metal connectors and manufacturing trusses and other structural elements. Machine dimensions: 5.0 x 1.30 m – Left roller table 12.95 x 3.9 m – Right flat table 12.00 x 3.90 m – Pressing area 400 x 130 x height 20 cm – Total length 26.30 m x depth 3.90 m (tables) and 5.0 m (press). Includes a large batch of cartons of GANG–NAILS connectors. The right table is used for assembly and preparation of trusses and for distributing GN plates. Then, stepwise feed and clamping in the press. Finished elements are received on the left roller table. Manual removal of the item. Kodpsxdiucofx Adwedg In good technical condition.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 90450080, feed length Z-axis: 1,550 mm, workpiece weight (max.): 12,500 kg, cutting height (max.): 400 mm, feed rate Y-axis: 2,700 m/min, total length: 27,500 mm, total height: 4,500 mm, cutting width (max.): 800 mm, saw blade diameter: 520 mm, overall weight: 12,500 kg, power: 40 kW (54.38 HP), working length: 12,000 mm, working width: 800 mm, type of input current: three-phase, 5-Axis CNC Timber Frame Machining Center ESSETRE Techno One 1TG–5A 5-axis timber processing center (X Y Z B C) with fixed gantry Designed for the machining of all roof elements: straight and angled dovetail joints, tenon and mortise, hip and valley cuts, drilling with helical bits and by milling, all types of cuts, grooves and rebates – automatic feeding of beams – three tool magazines: 9, 2, and 5 positions each. Control panel – Essetre Travi graphical software Available tooling: saw blade, helical cutter head, tenoning cutter, roughing and straight cutters, dovetail cutters, 45° cutters, chain mortising unit Machining dimensions: max length 12,000 mm, max section 800 × 400 mm Kdsdpsxdik Rjfx Adweg Overall dimensions: length 27.5 m × depth 390 cm × height 450 cm – total machine weight 12,000 kg Total installed power: 40 kW – 400 Volts – 60A – Air consumption: 400 Nl/min – Compressed air pressure: 6 bar Complete with a set of cutters, drill bits, and various accessories In good technical and visual condition Ref. M26 / y12–pp410k

Condition: good (used), Year of construction: 1994, Chalet notching machine with 10-meter Tiger stop pusher, equipped with: 1 horizontal milling unit on top, 1 horizontal milling unit below, 1 front/rear milling unit, 1 horizontal drilling unit diameter 16 mm, 1 automatic Tiger stop of 10 meters, year: 2001, effective working length: 9.20 m. Ksdjxbn N Tepfx Adwsdg

Condition: used, functionality: fully functional, A complete production line for round timber processing, featuring frame saw technology as its core. The line is capable of processing logs with a top diameter of 15 cm and a butt diameter of up to 55 cm, in lengths from 2.5 to 9.5 meters. The technology consists of: 1) Log cascade for timber up to 10 meters in length, with dosing system 2) G710 frame saw, Královopolské strojírny - Equipped with a dosing carriage mounted on rails, featuring hydraulic centering of the piece - Output of the frame saw is fitted with separating wedges for distinguishing main and side lumber - The saw is powered by a 55 kW electric motor - Detailed description available in a separate file Kodpfx Ajxa Ettjdwsdg - The frame saw is followed by roller conveyors - Main lumber is returned via conveyors and directed to the second frame saw - Side boards are continuously transferred to the cascade, which delivers them to the edging center 3) G560 frame saw, Královopolské strojírny - Equipped with a dosing carriage mounted on rails, featuring hydraulic centering of the piece - Output of the frame saw is fitted with separating wedges for distinguishing main and side lumber - The saw is powered by a 45 kW electric motor - Detailed description available in a separate file - The frame saw is followed by a roller conveyor directing side boards to the cascade of the edging center - Main lumber is extracted immediately after being sawn, placed onto a carriage on rails, and, after package completion, pulled out of the sawmill using a winch 4) Edging center, Strojírny Loučná n. Desnou - Maximum cutting height 26 mm, cutting width 70 – 370 mm, total power consumption 29.2 kW - Detailed description available in a separate file - Side boards are dosed into the edging center via the vertical cascade - If required, boards are first cut to the desired production length, which can be set to fixed values or optimized for yield maximization - After cross-cutting, boards are edged to fixed widths in order to maximize lumber yield. Edged boards are then automatically transported via conveyors into storage bins according to their cut length. The final product is width-unsorted side lumber, typically with a width of 80 mm or more.

Condition: used, Year of construction: 1999, functionality: fully functional, saw blade diameter: 350 mm, working length: 3,200 mm, working width: 3,200 mm, saw blade speed: 4,600 rpm, saw drive: 7,500 W, working height: 60 mm, Equipment: documentation/manual, Homag Optimat CH04/32/32 Panel Saw – Fully Equipped Still in use to date, 1 to 2 days per week, but offered for sale due to business closure in Slovakia. Always well maintained. ✅ Powerful performance Saw motor (7.5 kW) – Scoring saw (1.1 kW) Main saw RPM: 4600 rpm – scoring saw 5100 rpm ✅ Ease of use Air blower unit for easy positioning of panels to be cut Kedpfsw S Tqlex Adwedg Immediately available, fully equipped 📍 The machine is located in Slovakia and must be dismantled and collected on site by the buyer.

Condition: used, Year of construction: 2022, functionality: fully functional, machine/vehicle number: MJY 142S-35, MJF 143-1535, MJY-MJF production line from the Chinese manufacturer China SHENGONG. The equipment was commissioned in 11/2022 and is designed for processing round logs with a maximum diameter of 340 mm and length of 5 m. The technology comprises: Kdjdpfxsw Rg Ems Adwog - Log infeed deck for 5 m logs with dosing and centering - Infeed conveyor to the machine - Double-shaft canting saw MJY 142S-35 - Outfeed pressure rollers - Distribution outfeed conveyor for cant and side boards - Side boards conveyor - Cant conveyor with lateral ejection and flipping - Cant conveyor to multi-rip saw - Centering unit before multi-rip saw - Double-shaft multi-rip saw MJF 143-1535 - Lumber conveyor behind the saw - Side chains and lumber conveyor - Edging saw MJ 141-0440 with 5 lasers for saw blade positioning - Roller conveyor before and after the edger - Belt conveyor under the Multipris for offcut removal - Connecting belt conveyor - Belt conveyor under the multi-rip saw for offcut removal to chipping - Belt conveyor for removal from the hall - Chutes and conveyor connections - Accessories: hydraulics, electrics, and control system The price of the technology is without dismantling and at FCA Nepomuk Incoterms.

Condition: excellent (used), Year of construction: 2020, Machines included in the line 1. VANHOLD M 300 tracked multi-blade saw 2. Outfeed belt behind the multi-blade saw 3. Transfer belt to the automatic feeder with knockers 4. VANHOLD Speed Master automatic feeder 5. VANHOLD Powermax 2300_5 four-sided planer Detailed technical specifications of the line – available on request via email. The price of the new line is 100,000 euros. Kdjdpfxew Nhfls Adwjg